Microbial Analysis of Obturators During Maxillofacial Prosthodontic Treatment Over an 8-Year Period.

The aim of the study was to investigate the microbial colonization (by Candida species, anaerobic and facultative anaerobic bacteria) of maxillary obturators used for the restoration of maxillary defects, including during radiotherapy.Retrospective cohort study.Fifteen patients requiring a maxillary obturator prosthesis had swabs of their obturators and adjacent tissues taken at different stages of their treatment over a period of 8 years.Identification of microbial species from the swabs was carried out using randomly amplified polymorphic DNA polymerase chain reaction (RAPD PCR) analysis, checkerboard DNA-DNA hybridization, CHROMagar Candida chromogenic agar, and DNA sequencing.Candida species were detected in all patients and all patients developed mucositis and candidiasis during radiotherapy which was associated with an increase in colonization of surfaces with Candida spp., particularly C albicans. Microbial colonization increased during radiotherapy and as an obturator aged, and decreased following a reline, delivery of a new prosthesis, or antifungal treatment during radiotherapy.Microbial colonization of maxillary obturators was related to the stage of treatment, age of the obturator material, radiotherapy and antifungal medications, and antifungal treatment may be recommended if C albicans colonization of palatal tissues is greater than 105 colony-forming units per cm2 following the first week of radiotherapy.

Accuracy evaluation of 3D-printed guide-assisted flapless micro-osteoperforations in the anterior mandible.

AIM: To evaluate the accuracy of tridimensional (3D)-printed guide-assisted flapless cortical bone micro-osteoperforations (MOPs) in the anterior mandible on a cadaver model. MATERIALS AND METHODS: Five human cadaver heads with complete dentition in the anterior mandible were used in the present study. Preplanning CBCT and intraoral surface scans were obtained. After alignment, drilling sites in the interradicular areas were planned from canine to canine, and a surgical guide was printed. The drilling was performed and a postprocedure CBCT scan was obtained to assess the accuracy of the procedure in relation to the virtual planning. RESULTS: The mean ± standard deviation (SD) mesiodistal interradicular space was 2.67 ± 0.84 mm. The mean ± SD error of the actual drilled hole compared with the planned position of the mesial drill site was 0.66 ± 0.33 mm, and to the distal drill site it was 0.56 ± 0.33 mm. There was a statistically significant difference between the number of times the teeth were hit mesially (10 out of 64 holes) and distally (none). CONCLUSIONS: The proposed technique, limited to an ex vivo scenario, provides a valid and reliable method for mandibular MOPs using a 3D-generated surgical guide. However, the risk of damaging adjacent radicular surfaces, particularly in areas with limited mesiodistal interradicular bone, needs to be considered. Further studies should focus on using thinner drills and adding other methods to stabilize the guide. Additionally, by selecting individuals and perforation sites with more mesiodistal interradicular bone, less damage is likely. (Int J Comput Dent 2022;25(4):387-0; doi: 10.3290/j.ijcd.b2599841).

The Role of Biofilms and Material Surface Characteristics in Microbial Adhesion to Maxillary Obturator Materials: A Literature Review.

BACKGROUND: Maxillofacial prosthetics includes restoration of maxillary defects resulting from resection of palate and nasosinus neoplasms with obturator prostheses which may be colonized by microorganisms and function as a reservoir of infection. Patients with neoplasms commonly also require radiotherapy that can result in changes in saliva quality and quantity and changes in the oral microbial flora. The altered flora, in individuals immunocompromised from cancer therapy, increases their risk of prosthesis-related infections. OBJECTIVES: In this review article, we explore microbial biofilms, their main components, mechanisms of microbial adhesion, and stages of biofilm development. We also discuss the different materials that are used for manufacturing maxillary obturators, their characteristic features, and how these can affect microbial adhesion. Furthermore, we shed some light on the factors that affect microbial adhesion to the surface of maxillary obturators including tissue proteins, protein adsorption, and the acquired enamel pellicle. CONCLUSIONS: The conclusions drawn from this literature review are that it is imperative to minimize the risk of local and systemic infections in immunocompromised patients with cancer having maxillary defects. It is also important to determine the role of saliva in microbial adhesion to obturator materials as well as develop materials that have a longer life span with surface characteristics that promote less microbial adhesion than current materials.

CCL2 and CCR2 are Essential for the Formation of Osteoclasts and Foreign Body Giant Cells.

Osteoclasts are multinucleated cells responsible for bone resorption. They are derived from the fusion of cells in the monocyte/macrophage lineage. Monocytes and macrophages can also fuse to form foreign body giant cells (FBGC). Foreign body giant cells are observed at the interface between a host and a foreign body such as implants during a foreign body reaction. Macrophages are attracted to the site of bone resorption and foreign body reactions by different cytokines. Chemokine (C-C) ligand-2 (CCL2) is an important chemotactic factor and binds to a receptor CCR2. In this study we investigated the importance of CCL2 and the receptor CCR2 in the formation of osteoclasts and FBGC. CCL2 mRNA was more highly expressed in giant cell culture than macrophages, being 9-fold and 16-fold more abundant in osteoclasts and FBGC respectively. Significantly fewer osteoclasts and FBGC were cultured from the bone marrow of CCL2 and CCR2 knockout mice, when compared to wild type. Not only were the number of giant cells reduced but there was a significant reduction in the number of nuclei and the size of these cells in the cultures of CCL2 and CCR2 knockout mice. Formation of osteoclasts and FBGC were recovered in cultures by addition of exogenous CCL2 to the media containing marrow cells from CCL2-/- mice. We conclude that CCL2 and its receptor CCR2 are important for the formation of osteoclasts and FBGC and absence of these genes causes inhibition of osteoclast and FBGC formation.

Oral Cancer: An Evaluation of Knowledge and Awareness in Undergraduate Dental Students and the General Public.

PURPOSE: To evaluate the knowledge of signs, symptoms and risk factors associated with oral cancer amongst undergraduate dental students and members of the general public. MATERIALS AND METHODS: This study was open for a period of six months (Jan-June, 2013) to all undergraduate dental students in the 4th and 5th year of the dental science programme and dental patients attending the School of Dentistry, Griffith University, Australia. The survey evaluated the knowledge and awareness of clinical signs and symptoms and risk factors of oral cancers. RESULTS: A total of 100 undergraduate students and 150 patients provided informed consent and participated in this survey study. Both patients and dental students were aware of the importance of early detection of oral cancer. With the exception of smoking and persistent ulceration, this study indicated that the knowledge about oral cancer, its signs, symptoms and risk factors was limited amongst participants. CONCLUSION: This study highlights the need to raise awareness and knowledge pertaining to oral cancer, not only in the general community but also amongst those in the dental field. Specific points of concern were the common intraoral sites for oral cancer, erythroplakia as a risk factor, the synergistic action of smoking and alcohol, and HPV (human papilloma virus) as risk factors for oral cancer.

Protocol for assessing maternal, environmental and epigenetic risk factors for dental caries in children.

BACKGROUND: Expenditure on dental and oral health services in Australia is $3.4 billion AUD annually. This is the sixth highest health cost and accounts for 7 % of total national health expenditure. Approximately 49 % of Australian children aged 6 years have caries experience in their deciduous teeth and this is rising. The aetiology of dental caries involves a complex interplay of individual, behavioural, social, economic, political and environmental conditions, and there is increasing interest in genetic predisposition and epigenetic modification. METHODS: The Oral Health Sub-study; a cross sectional study of a birth cohort began in November 2012 by examining mothers and their children who were six years old by the time of initiation of the study, which is ongoing. Data from detailed questionnaires of families from birth onwards and data on mothers' knowledge, attitudes and practices towards oral health collected at the time of clinical examination are used. Subjects' height, weight and mid-waist circumference are taken and Body Mass Index (BMI) computed, using an electronic Bio-Impedance balance. Dental caries experience is scored using the International Caries Detection and Assessment System (ICDAS). Saliva is collected for physiological measures. Salivary Deoxyribose Nucleic Acid (DNA) is extracted for genetic studies including epigenetics using the SeqCap Epi Enrichment Kit. Targets of interest are being confirmed by pyrosequencing to identify potential epigenetic markers of caries risk. DISCUSSION: This study will examine a wide range of potential determinants for childhood dental caries and evaluate inter-relationships amongst them. The findings will provide an evidence base to plan and implement improved preventive strategies.

Differential expression of chemokines, chemokine receptors and proteinases by foreign body giant cells (FBGCs) and osteoclasts.

Osteoclasts and foreign body giant cells (FBGCs) are both derived from the fusion of macropahges. These cells are seen in close proximity during foreign body reactions, therefore it was assumed that they might interact with each other. The aim was to identify important genes that are expressed by osteoclasts and FBGCs which can be used to understand peri-implantitis and predict the relationship of these cells during foreign body reactions. Bone marrow macrophages (BMM) were treated with receptor activator of nuclear factor kappa B ligand (RANKL) to produce osteoclasts. Quantitative PCR (qPCR) was used to identify the genes that were expressed by osteoclasts and FBGCs compared to macrophage controls. TRAP staining was used to visualise the cells while gelatine zymography and western blots were used for protein expression. Tartrate-resistant acid phosphatase (TRAP), matrix metallo proteinase 9 (MMP9), nuclear factor of activated T cells 1 (NFATc1), cathepsin K (CTSK) and RANK were significantly lower in FBGCs compared to osteoclasts. Inflammation specific chemokines such as monocyte chemotactic protein (MCP1 also called CCL2), macrophage inflammatory protein 1 alpha (MIP1α), MIP1ß and MIP1γ, and their receptors CCR1, CCR3 and CCR5, were highly expressed by FBGCs. FBGCs were negative for osteoclast specific markers (RANK, NFATc1, CTSK). FBGCs expressed chemokines such as CCL2, 3, 5 and 9 while osteoclasts expressed the receptors for these chemokines i.e. CCR1, 2 and 3. Our findings show that osteoclast specific genes are not expressed by FBGCs and that FBGCs interact with osteoclasts during foreign body reaction through chemokines.

The Accuracy of Digital Impressions versus Conventional Impressions in Neonates with Cleft Lip and/or Palate: A Laboratory-Based Study.

Cleft lip and palate (CL/P) are a common congenital craniofacial anomaly requiring precise impressions for effective treatment. Conventional impressions (CIs) pose challenges in neonates with CL/P due to their delicate oral anatomy. While digital impressions (DIs) are increasingly recognised for their potential benefits over conventional methods in dentistry, their accuracy and application in neonates with cleft lip and palate (CL/P) remain underexplored. This study aimed to assess the accuracy of DIs compared to CIs in neonates with CL/P, using alginate and putty materials as references. A laboratory-based case-control study was conducted, utilising soft acrylic models resembling neonatal mouths with CL/P. Alginate and putty impressions were obtained conventionally, while digital impressions were captured using an intraoral scanner (IOS). A total of 42 models were analysed, divided evenly into three groups, with each group comprising 14 models. Superimposition and surface discrepancy analyses were performed to evaluate impression accuracy. The results revealed no statistically significant differences between the digital and conventional impressions in their intra-arch measurements and surface discrepancies. The mean measurement values did not significantly differ among groups, with p values indicating no significant variations (p > 0.05), confirmed by an analysis of variance. High intra-examiner reliability with Intra Class Coefficient (ICC) values close to 1 indicated consistent measurements over time. The current study demonstrates that DIs are equally accurate as conventional alginate and putty impressions in neonates with cleft lip and palate, offering a viable and less invasive alternative for clinical practise. This advancement holds promise for improving the treatment planning process and enhancing patient comfort, particularly in vulnerable neonatal populations. Further research is warranted to explore the clinical implications and factors affecting DI accuracy in this population.

Evaluating the Effects of Cigarette Smoking and Heated Tobacco Products on Hard Dental Tissues: A Comparative Histological and Colorimetric Analysis.

OBJECTIVES: This study aimed to evaluate and compare the impact of cigarette smoking (CS) and heated tobacco (HT) on the alteration of color and ultrastructural characteristics of human enamel and cementum. BACKGROUND: According to tobacco companies, a less harmful substitute for CS is HT products. Nevertheless, comprehensive research on the effects of HT on tooth structures has been lacking. This study aimed to evaluate and compare the impact of CS and HT on the alteration of color and ultrastructural characteristics of human enamel and cementum. MATERIALS AND METHODS: Thirty intact and noncarious human maxillary premolars extracted for orthodontic treatment purposes, previously disinfected, were used in the study. The specimens were randomly separated into six groups (n = 10), as follows: Group 1: enamel without smoking exposure; Group 2: enamel exposed to CS; Group 3: enamel exposed to HT; Group 4: cementum without smoking exposure; Group 5: cementum exposed to CS; and Group 6: cementum exposed to HT. The measurement of color change was conducted using a spectrophotometer. The surface alterations and mineral composition of enamel and cementum were evaluated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. ANOVA test followed by Tukey's post hoc test was used to determine significant differences between groups. RESULTS: Results showed that CS had a more pronounced effect on enamel and cementum color changes than HT. The impact of CS and HT on color changes was more evident in cementum than in enamel. Surface morphology of enamel and cementum showed alterations in histology following exposure to both smoking types. Moreover, the mineral content experienced a significant reduction after using CS and HT. The reduction in calcium content after CS and HT exposure was similar. However, HT led to a significant decrease in the phosphorus content of enamel when compared with CS. At the same time, CS exposure in cementum resulted in a more significant reduction in Ca/P ratio than HT. CONCLUSIONS: Although HT may appear to present a lower danger to hard dental tissues than CS, it is not entirely harmless. CS results in more color changes on the enamel and cementum of teeth. Both smoking methods affected the mineral content of teeth, with CS having a significant effect on the roots, while HT significantly affected the crowns' mineral composition.

Clinician- and Patient-Centred Outcomes of Digital Impressions in Infants with Cleft Lip and Palate: A Systematic Review.

This systematic review examines the effectiveness of digital impressions in infants with cleft lip and palate (CLP), focusing on accuracy, operator preferences, and parents' perceptions. The PICO-formulated focused questions assessed the accuracy and operator preference of digital impressions compared to conventional impressions in infants with cleft lip and palate, while also exploring parents' perceptions as patient-centred outcomes. Electronic and manual searches were conducted in five databases including PubMed, Scopus, Web of Science, Embase, and Cochrane Library; to acquire grey literature, Google Scholar was also consulted. Both experimental and observational studies that used digital impressions in the clinical care of infants with CLP were included. The Joanna Briggs Institute Critical Appraisal Checklist was used to assess the quality of the included studies. Out of 503 records, 12 studies met the inclusion criteria. The accuracy assessment included surface discrepancy and intra-arch measurements. Surface discrepancy studies showed variations in the premaxillary segments, while intra-arch measurements revealed no significant differences. Operators preferred digital impressions, citing reduced stress and streamlined workflows. Parents expressed a clear preference for digital over conventional impressions. The conclusions drawn were substantiated by weak evidence due to the limited number and the high risk of bias of the included studies. Challenges remain here, warranting continued research to enhance accuracy and assess parents' preferences, ensuring optimal outcomes for infants with CLP.

Effect of Two Different Intraoral Polishing Systems on Surface Roughness, Color Stability, and Bacterial Accumulation of Zirconia-Reinforced Lithium Silicate Ceramic.

OBJECTIVE: The aim of this study was to investigate the effects of two intraoral polishing methods on zirconia-reinforced lithium silicate ceramic after ultrasonic scaling. MATERIALS AND METHODS: Thirty disc-shaped samples of zirconia-reinforced lithium silicate were constructed. Freshly extracted bovine teeth were collected and cleaned then the discs were cemented into a cavity prepared onto their labial surface. The samples were divided into three groups (10 samples per group); S: Scaling only, SE: Scaling followed by polishing using Eve Diapro lithium disilicate polishers, SD: Scaling followed by polishing using Diatech ShapeGuard ceramic polishing plus kit. The surface roughness was evaluated after scaling and polishing the samples. For color stability, the samples were stored for 12 days at 37°C in an incubator to simulate 1-year consumption of coffee. L*a*b* color parameters were assessed using VITA Easyshade Advance 4.0 before and after the staining procedure and the color difference was measured. Finally, bacterial accumulation was evaluated by incubating the samples with a suspension of Streptococcus mutans ( S. mutans), after that the S. mutans colonies were counted to obtain the values of colony-forming units (CFU). The final overall roughness, change in color and bacterial count were compared between all groups using one-way ANOVA and Tukey's post-hoc analysis. The Pearson correlation coefficient was used to determine the correlation between continuous variables. The cutoff for significance was chosen at p ≤ 0.05. RESULTS: Scaling induced surface roughness of the zirconia-reinforced lithium silicate ceramic was significantly decreased after using both intraoral polishing systems and this was accompanied by a significant decrease in color change and bacterial count. CONCLUSION: Intraoral polishing techniques can reduce the roughness of the surface of zirconia reinforced lithium silicate restorations induced due to scaling and subsequently reduce the stainability and bacterial accumulation.

Effect of Acidic Media on Surface Topography and Color Stability of Two Different Glass Ceramics.

OBJECTIVE: The aim of this study was to determine the effect of two acidic beverages (orange juice and H3PO4-containing fizzy drink) on the surface topography and color stability of two commonly used computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials. MATERIALS AND METHODS: Sixty samples of two CAD/CAM ceramic materials, lithium disilicate (IPS e-max CAD) and zirconia reinforced lithium silicate (Vita Suprinity), were prepared according to the manufacturer's instructions. The samples were immersed in one of three media (artificial saliva, orange juice and H3PO4-containing fizzy drink) and then stored in an incubator at 37 °C for 24 hours). Before and after immersion in different media, the surface roughness (Ra) of the samples was assessed using profilometer (JITAI8101 Surface Roughness Tester-Beijing Jitai Tech Detection Device Co. Ltd, China) and the color parameters were measured using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). Surface topography was observed using scanning electron microscope (SEM) and surface mineral content was compared before and after immersion. Paired sample t-test was used to determine the change in Ra before and after immersion. Two-way analysis of variance was used to determine the effect of different CAD/CAM materials and immersion media on the mean ∆Ra and mean ∆E of the studied groups. Tukey's honest significant difference posthoc test was used for multiple comparisons at a level of significance (α = 0.05). RESULTS: A significant increase in Ra and a decrease in the color stability of the two investigated ceramic materials were detected after immersion in the acidic media than in artificial saliva. SEM and energy-dispersive X-ray results revealed the dissolution of the glassy matrix and the exposure of silicate crystals. CONCLUSION: The surface topography and color stability of glass ceramics are affected by the pH of different acidic media.

Effect of pulp capping materials on odontogenic differentiation of human dental pulp stem cells: An in vitro study.

OBJECTIVES: Migration and differentiation of human dental pulp stem cells (hDPSCs) is a vital and key factor in the success of reparative dentin formation for maintenance of pulp vitality. Pulp capping materials are used to stimulate DPSCs to induce new dentin formation. Thus, the aim of the present study was to compare the response of DPSCs to four commercially available pulp capping materials: a bioactive bioceramic (Material 1), a nonresinous ready-to-use bioceramic cement (Material 2), a bioactive composite (Material 3), and a biocompatible, dual-cured, resin-modified calcium silicate (Material 4). MATERIALS AND METHODS: hDPSCs were isolated and cultured from freshly extracted teeth and were then characterized by flow cytometry and multilineage differentiation. Discs prepared from pulp capping materials were tested with hDPSCs and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, cell migration assay and odontogenic differentiation assay was performed. Expression of osteogenic markers (osteopontin, RUNX family transcription factor 2, osteocalcin) and the odontogenic marker (dentin sialophosphoprotein) was detected using reverse transcription-polymerase chain reaction. RESULTS: Materials 1, 2, and 3 generated more cell viability than Material 4. Furthermore, Material 4 showed the least wound exposure percentage, while Material 3 showed the highest percentage. Enhanced mineralization was found in hDSCPs cultured with Material 3, followed by Material 1, and then Material 2, while Material 4 revealed the least calcified mineralization. CONCLUSIONS: The results of this study were inconclusive regards contemporary bioceramic materials designed for vital pulp therapy as they have different effects on hDPSC. Further testing for cytotoxicity using live-dead staining, animal experiments, clinical trials, and independent analyses of these biomaterials is necessary for clinicians to make an informed decision for their use.

Considerations for oral and dental tissues in holistic care during long-haul space flights.

The health of astronauts during and after the return from long-haul space missions is paramount. There is plethora of research in the literature about the medical side of astronauts' health, however, the dental and oral health of the space crew seem to be overlooked with limited information in the literature about the effects of the space environment and microgravity on the oral and dental tissues. In this article, we shed some light on the latest available research related to space dentistry and provide some hypotheses that could guide the directions of future research and help maintain the oral health of space crews. We also promote for the importance of regenerative medicine and dentistry as well highlight the opportunities available in the expanding field of bioprinting/biomanufacturing through utilizing the effects of microgravity on stem cells culture techniques. Finally, we provide recommendations for adopting a multidisciplinary approach for oral healthcare during long-haul space flights.

Balancing Risks versus Benefits: Vitamin C Therapy versus Copper Oxide Nanoparticles Toxicity in Albino Rats' Submandibular Salivary Gland.

OBJECTIVES: This study aimed to examine the suppressive effect of the natural antioxidant vitamin C (VC) against submandibular gland toxicity induced by copper oxide nanoparticles (CuO-NPs). MATERIALS AND METHODS: Three groups of 30 mature male albino rats (4 weeks old) weighing between 150 and 200 g were selected. The rats were randomly assigned for 6 weeks to receive: intraperitoneal injection (IP) of vehicle (control group); IP of 2.5 mg/kg body weight (bw) of CuO-NPs (CuO-NPs group); and IP of 2.5 mg/kg bw of CuO-NPs, combined with a daily oral dose of 100 mg/kg bw of VC in drinking water via gavage (CuO-NPs/VC group). The rats were euthanized, and their submandibular glands were dissected for histological evaluation, including hematoxylin and eosin staining and immunohistochemistry for Ki-67 and caspase-3. STATISTICAL ANALYSIS: The area expression for Ki-67 and caspase-3 was statistically analyzed using GraphPad Prism. Following analysis of variance analysis, Tukey's post hoc was used for multiple comparisons. The significance level was set at p < 0.05. RESULTS: CuO-NPs caused significant cytotoxic effects on submandibular salivary gland cells in albino rats. This led to an increase in Ki-67 and caspase-3 levels compared with the control group. VC administration improved tissue histology and reduced Ki-67 and caspase-3 levels in the VC/CuO-NPs group compared with rats treated with CuO-NPs alone. CONCLUSION: The study revealed significant cytotoxic effects of CuO-NPs on the submandibular salivary gland of albino rats. VC effectively mitigated these toxic effects, suggesting its potential as a readily available antioxidant.

Efficacy of an impression disinfectant solution after repeated use: An in vitro study.

Statement of problem: There are very few studies using Benzalkonium Chloride (BAC) as an active disinfection agent for immersion techniques and there are no studies investigating the efficacy of repeated use of a disinfectant solution. Purpose: This study evaluated an impression disinfectant by testing bacterial contamination of disinfectant batches used in a clinical setting after repeated use. Materials and methods: Liquid samples were collected from impression disinfectant solutions used to disinfect dental impressions taken at a university dental clinic. The experimental samples (500 ml from 1 L of solution) were collected from teaching and professional clinics and the in-house commercial processing laboratory and stored at room temperature each day of clinic operation over five weeks. To determine to what extent the disinfectant efficacy of the active product decreased over time, the following tests were carried out: a. Inoculation b. Gram staining technique c. Matrix Assisted Laser Desorption/Ionization Mass spectrometry (MALDI- MS). Microbial growth was monitored and photographed. A culture revival was made from colonies grown on sheep blood agar, to isolate pure colonies incubated for 24 h at 37 °C. Each morphologically distinct type of colony was gram stained and MALDI spectrometry analysis was performed using the VITEK MS (BioMerieux Inc.). Results: Evidence of growth of bacteria was detected in teaching clinics' samples, and no growth from the professional clinic or the commercial laboratory. Conclusions: The study demonstrated that the impression disinfectant solution tested is effective against common oral bacteria, despite some rare species such as Bacillus circulans, Bacillus horneckiae, Bacillus altitudinis/pumilus and Bacillus cereus showing evidence of survival in solutions used for disinfection of impressions. However, in a high use teaching clinic environment its efficacy deteriorated. Though a second level disinfection protocol in the commercial laboratory-maintained impression disinfection.

Cellulose de-polymerization is selective for bioethanol refinery and multi-functional biochar assembly using brittle stalk of corn mutant.

As lignocellulose recalcitrance principally restricts for a cost-effective conversion into biofuels and bioproducts, this study re-selected the brittle stalk of corn mutant by MuDR-transposon insertion, and detected much reduced cellulose polymerization and crystallinity. Using recyclable CaO chemical for biomass pretreatment, we determined a consistently enhanced enzymatic saccharification of pretreated corn brittle stalk for higher-yield bioethanol conversion. Furthermore, the enzyme-undigestible lignocellulose was treated with two-step thermal-chemical processes via FeCl2 catalysis and KOH activation to generate the biochar with significantly raised adsorption capacities with two industry dyes (methylene blue and Congo red). However, the desirable biochar was attained from one-step KOH treatment with the entire brittle stalk, which was characterized as the highly-porous nanocarbon that is of the largest specific surface area at 1697.34 m2/g and 2-fold higher dyes adsorption. Notably, this nanocarbon enabled to eliminate the most toxic compounds released from CaO pretreatment and enzymatic hydrolysis, and also showed much improved electrochemical performance with specific capacitance at 205 F/g. Hence, this work has raised a mechanism model to interpret how the recalcitrance-reduced lignocellulose is convertible for high-yield bioethanol and multiple-function biochar with high performance.

Foreign body giant cells and osteoclasts are TRAP positive, have podosome-belts and both require OC-STAMP for cell fusion.

Macrophages have the ability to fuse and form multinucleated giant cells such as Osteoclast (OCs) and FBGCs. Osteoclast stimulatory transmembrane protein (OC-STAMP) is an important cell surface protein involved in the formation of OCs. This study sought to determine if OC-STAMP also regulates formation of FBGCs using expression analysis and subsequent inhibition studies. qPCR and Western blot analysis showed that OC-STAMP expression is significantly higher in FBGCs compared to control monocytes (P < 0.05). Four days following cell culture, OCs were positive for TRAP and F-actin ring formation, but FBGCs were not. In contrast, FBGCs were positive for TRAP and showed podosome belts comprised of F-actin on Day 8. FBGCs were subsequently plated onto dentine, but despite presenting some morphologic features of OCs (OC-STAMP expression, TRAP reactivity, and podosome belts) they failed to resorb bone. To evaluate a role for OC-STAMP in FBGCs, we inhibited this cell surface protein with anti-OC-STAMP antibody and observed that cell fusion and podosome belt formation was inhibited in both OCs and FBGCs. Our data support the hypothesis that OC-STAMP is a regulatory molecule for FBGCs; and that they are functionally distinct from OCs, despite similarities in gene expression profile, podosome belt formation, and TRAP expression.

Management of hormonal induced recurrent ulcerative fibrous epulis with osseous metaplasia: A case report.

Key Clinical Message: Understanding the role of hormones in periodontitis is important. Periodontal microscopic surgery approach in the treatment of fibrous epulis is not indicated. Wider flap access with root planning is indicated to control the lesion in one phase. Abstract: We present a case of a 40-year-old female who presented with a gingival hyperplastic lesion around the maxillary left permanent central and lateral incisors. Patient's medical history reveals a recent pregnancy, hypothyroidism, ulcerative colitis, and schizoaffective disorder. All medical conditions were controlled by medications. The lesion was excised using a minimally invasive periodontal surgical technique, and the biopsy results confirmed a diagnosis of ulcerative fibrous epulis with osseous metaplasia. No curettage or local debridement was done under the assumption that the patient's oral hygiene was satisfactory and due to aesthetic concerns of gingival recession and creation of black triangles. The lesion recurred after 3 months and was removed using a traditional more invasive surgical technique. The patient was followed up for 2 years, and there was no further recurrence due to the complete excision of the lesion in the second surgery and the disappearance of the hormonal-related factors post-pregnancy that could have contributed to the gingival hyperplasia. The unique component of the case we are presenting is the comparison between two different surgical techniques and the conduction versus absence of local periodontal debridement after surgical excision as well as the possible correlation between oral supplements and the calcific nature of the lesion(s) reported. The case we present demonstrates that a more invasive traditional surgical approach together with local periodontal therapy provide an optimum treatment outcome in conjunction with elimination of any associated etiological factors. We also propose that hormones are more important as an etiological factor in developing fibrous epulis lesions than medical conditions and medications.

Assessment of Five Concrete Types as Candidate Shielding Materials for a Compact Radiation Source Based on the IECF.

A radiation source based on the inertial electrostatic confinement fusion (IECF) system is being developed for multidisciplinary research applications. The radiation outputs from the IECF system are 2.45 MeV fast neutrons and the associated co-generated X-rays with an energy less than 3 MeV. A radiation shielding study has been performed on five types of concrete to define the most efficient material for the shielding design of the system. The proposed materials were ilmenite-magnetite concrete (IMC), ordinary concrete-1 (OC-1), barite-containing concrete (BC), ordinary concrete-2 (OC-2), and serpentine-containing concrete (SC). A numerical model was applied to determine the effective removal cross-section coefficients (∑Rt) for the fast neutrons and the total mass attenuation coefficients (µm), the half-value layer (HVL), the mean free path (MFP), the effective atomic number (Zeff), and effective electron density (Neff) for photons inside the materials. The model considered the radiation source energy and the material properties of the concrete types. The results revealed that the serpentine-containing concrete exhibited the highest ∑Rt with 12 cm of concrete thickness needed to attenuate an incident neutron flux to 1/100 of its initial value. In addition, the BC shows the highest µm with a 38 cm concrete thickness needed to attenuate the 3 MeV energy X-ray flux to 1/100 of its initial value. This study suggests that a 40 cm thickness of SC or BC adequately shields the radiation generated from an IECF system with a maximum particle production rate of up to 1 × 107 n/s.