RESUMEN
The Jungfraujoch Research Station (46.55 degrees N, 7.98 degrees E, 3580 m above sea level) for decades has contributed in a significant manner to the systematic observation of the Earth's atmosphere both with in situ measurements and with trace gas column detection. We report on the development of a lidar system that improves the measurement potential of highly resolved atmospheric parameters in both time and space, with the goal of achieving long-term monitoring of atmospheric aerosol optical properties and water-vapor content. From the simultaneously detected elastic-backscatter signals at 355, 532, and 1064 nm, Raman signals from nitrogen at 387 and 607 nm, and water vapor at 408 nm, the aerosol extinction and backscatter coefficients at three wavelengths and a water-vapor mixing ratio are derived. Additional information about particle shape is obtained by depolarization measurements at 532 nm. Water-vapor measurements by use of both nitrogen and water-vapor Raman returns from the 355-nm laser beam are demonstrated with a vertical range resolution of 75 m and an integration time of 2 h. The comparison to the water-vapor profile derived from balloon measurements (Snow White technique) showed excellent agreement. The system design and the results obtained by its operation are reported.
RESUMEN
In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.