Long-Range Epitaxial MOF Electronics for Continuous Monitoring of Human Breath Ammonia.

As an important biomarker, ammonia exhibits a strong correlation with protein metabolism and specific organ dysfunction. Limited by the immobile instrumental structure, invasive and complicated procedures, and unsatisfactory online sensitivity and selectivity, current medical diagnosis fails to monitor this chemical in real time efficiently. Herein, we present the successful synthesis of a long-range epitaxial metal-organic framework on a millimeter domain-sized single-crystalline graphene substrate (LR-epi-MOF). With a perfect 30° epitaxial angle and a mere 2.8% coincidence site lattice mismatch between the MOF and graphene, this long-range-ordered epitaxial structure boosts the charge transfer from ammonia to the MOF and then to graphene, thereby promoting the overall charge delocalization and exhibiting extraordinary electrical global coupling properties. This unique characteristic imparts a remarkable sensitivity of 0.1 ppb toward ammonia. The sub-ppb detecting capability and high anti-interference ability enable continuous information recording of breath ammonia that is strongly correlated with the intriguing human lifestyle. Wearable electronics based on the LR-epi-MOF could accurately portray the active protein metabolism pattern in real time and provide personal assistance in health management.

12-inch growth of uniform MoS2 monolayer for integrated circuit manufacture.

Two-dimensional (2D) semiconductors, such as transition metal dichalcogenides, provide an opportunity for beyond-silicon exploration. However, the lab to fab transition of 2D semiconductors is still in its preliminary stages, and it has been challenging to meet manufacturing standards of stability and repeatability. Thus, there is a natural eagerness to grow wafer-level, high-quality films with industrially acceptable scale-cost-performance metrics. Here we report an improved chemical vapour deposition synthesis method in which the controlled release of precursors and substrates predeposited with amorphous Al2O3 ensure the uniform synthesis of monolayer MoS2 as large as 12 inches while also enabling fast and non-toxic growth to reduce manufacturing costs. Transistor arrays were fabricated to further confirm the high quality of the film and its integrated circuit application potential. This work achieves the co-optimization of scale-cost-performance metrics and lays the foundation for advancing the integration of 2D semiconductors in industry-standard pilot lines.

Ultrafast materials synthesis and manufacturing techniques for emerging energy and environmental applications.

Energy and environmental issues have attracted increasing attention globally, where sustainability and low-carbon emissions are seriously considered and widely accepted by government officials. In response to this situation, the development of renewable energy and environmental technologies is urgently needed to complement the usage of traditional fossil fuels. While a big part of advancement in these technologies relies on materials innovations, new materials discovery is limited by sluggish conventional materials synthesis methods, greatly hindering the advancement of related technologies. To address this issue, this review introduces and comprehensively summarizes emerging ultrafast materials synthesis methods that could synthesize materials in times as short as nanoseconds, significantly improving research efficiency. We discuss the unique advantages of these methods, followed by how they benefit individual applications for renewable energy and the environment. We also highlight the scalability of ultrafast manufacturing towards their potential industrial utilization. Finally, we provide our perspectives on challenges and opportunities for the future development of ultrafast synthesis and manufacturing technologies. We anticipate that fertile opportunities exist not only for energy and the environment but also for many other applications.

Large-scale and stacked transfer of bilayers MoS2devices on a flexible polyimide substrate.

Two-dimensional transition metal dichalcogenides (TMDs), as flexible and stretchable materials, have attracted considerable attention in the field of novel flexible electronics due to their excellent mechanical, optical, and electronic properties. Among the various TMD materials, atomically thin MoS2has become the most widely used material due to its advantageous properties, such as its adjustable bandgap, excellent performance, and ease of preparation. In this work, we demonstrated the practicality of a stacked wafer-scale two-layer MoS2film obtained by transferring multiple single-layer films grown using chemical vapor deposition. The MoS2field-effect transistor cell had a top-gated device structure with a (PI) film as the substrate, which exhibited a high on/off ratio (108), large average mobility (∼8.56 cm2V-1s-1), and exceptional uniformity. Furthermore, a range of flexible integrated logic devices, including inverters, NOR gates, and NAND gates, were successfully implemented via traditional lithography. These results highlight the immense potential of TMD materials, particularly MoS2, in enabling advanced flexible electronic and optoelectronic devices, which pave the way for transformative applications in future-generation electronics.

Application and curative effect of laparoscopic purse-string sutures in the treatment of adult acute complicated appendicitis.

OBJECTIVE: To investigate the effect of laparoscopic purse-string sutures in adult complicated appendicitis treatment. METHODS: The data of 568 adult cases of complicated appendicitis treated by laparoscopic appendectomy at the Hefei Second People's Hospital, Anhui Province, China, from September 2018 to September 2021 were analysed retrospectively. The patients were divided into two groups: 295 cases in the laparoscopic purse-string suture treatment group (observation group) and 273 cases in the simple Hem-o-lok® clamp treatment group (control group). The baseline data collected included age, gender, preoperative body temperature, leukocyte count and percentage of neutrophils and the surgery time. The postoperative data collected included antibiotic treatment duration, drainage tube placement time and the incidence of complications. RESULTS: There were no significant differences in the baseline data of the two groups, including age, gender, preoperative body temperature, leukocyte count and neutrophil percentage (all P > 0.05). Compared with the control group, the postoperative hospital length of stay, duration of antibiotic treatment, the recovery time of peripheral white blood cell and neutrophil counts and the incidence of postoperative complications in the observation group were significantly decreased (P < 0.05). CONCLUSION: Purse-string sutures can effectively reduce the incidence of postoperative complications after a laparoscopic appendectomy for adult acute complicated appendicitis. There was faster postoperative recovery when patients' appendiceal stumps were treated with laparoscopic purse-string sutures.

Integrated In-Sensor Computing Optoelectronic Device for Environment-Adaptable Artificial Retina Perception Application.

With the development and application of artificial intelligence, there is an appeal to the exploitation of various sensors and memories. As the most important perception of human beings, vision occupies more than 80% of all the received information. Inspired by biological eyes, an artificial retina based on 2D Janus MoSSe was fabricated, which could simulate functions of visual perception with electronic/ion and optical comodulation. Furthermore, inspired by human brain, sensing, memory, and neuromorphic computing functions were integrated on one device for multifunctional intelligent electronics, which was beneficial for scalability and high efficiency. Through the formation of faradic electric double layer (EDL) at the metal-oxide/electrolyte interfaces could realize synaptic weight changes. On the basis of the optoelectronic performances, light adaptation of biological eyes, preprocessing, and recognition of handwritten digits were implemented successfully. This work may provide a strategy for the future integrated sensing-memory-processing device for optoelectronic artificial retina perception application.

Wafer-Scale Demonstration of MBC-FET and C-FET Arrays Based on Two-Dimensional Semiconductors.

Two-dimentional semiconductors have shown potential applications in multi-bridge channel field-effect transistors (MBC-FETs) and complementary field-effect transistors (C-FETs) due to their atomic thickness, stackability, and excellent electrical properties. However, the exploration of MBC-FET and C-FET based on large-scale 2D semiconductors is still lacking. Here, based on a reliable vertical stacking of wafer-scale 2D semiconductors, large-scale MBC-FETs and C-FETs using n-type MoS2 and p-type MoTe2 are successfully fabricated. The drive current of an MBC-FET with two layers of MoS2 channel (20 µm/10 µm) is up to 60 µA under 1 V bias. Compared with the single-gate MoS2 FET, the carrier mobility of MBC-FET is 2.3 times higher and the sub-threshold swing is 70% smaller. Furthermore, NAND and NOR logic circuits are also constructed based on two vertically stacked MoS2 channels. Then, C-FET arrays are fabricated by 3D integrating n-type MoS2 FET and p-type MoTe2 FET, which exhibit a voltage gain of 7 V/V when VDD  = 4 V. In addition, this C-FET device can directly convert light signals to an electrical digital signal within a single device. The demonstration of MBC-FET and C-FET based on large-scale 2D semiconductors will promote the application of 2D semiconductors in next-generation circuits.

Flexible Ultrathin Single-Crystalline Perovskite Photodetector.

Flexible optoelectronic devices attract considerable attention due to their prominent role in creating novel wearable apparatus for bionics, robotics, health care, and so forth. Although bulk single-crystalline perovskite-based materials are well-recognized for the high photoelectric conversion efficiency than the polycrystalline ones, their stiff and brittle nature unfortunately prohibits their application for flexible devices. Here, we introduce ultrathin single-crystalline perovskite film as the active layer and demonstrate a high-performance flexible photodetector with prevailing bending reliability. With a much-reduced thickness of 20 nm, the photodetector made of this ultrathin film can achieve a significantly increased responsivity as 5600A/W, 2 orders of magnitude higher than that of recently reported flexible perovskite photodetectors. The demonstrated 0.2 MHz 3 dB bandwidth further paves the way for high-speed photodetection. Notably, all its optoelectronic characteristics resume after being bent over thousands of times. These results manifest the great potential of single-crystalline perovskite ultrathin films for developing wearable and flexible optoelectronic devices.

Three-Dimensional Nanoscale Flexible Memristor Networks with Ultralow Power for Information Transmission and Processing Application.

To construct an artificial intelligence system with high efficient information integration and computing capability like the human brain, it is necessary to realize the biological neurotransmission and information processing in artificial neural network (ANN), rather than a single electronic synapse as most reports. Because the power consumption of single synaptic event is ∼10 fJ in biology, designing an intelligent memristors-based 3D ANN with energy consumption lower than femtojoule-level (e.g., attojoule-level) and faster operating speed than millisecond-level makes it possible for constructing a higher energy efficient and higher speed computing system than the human brain. In this paper, a flexible 3D crossbar memristor array is presented, exhibiting the multilevel information transmission functionality with the power consumption of 4.28 aJ and the response speed of 50 ns per synaptic event. This work is a significant step toward the development of an ultrahigh efficient and ultrahigh-speed wearable 3D neuromorphic computing system.

Multifunctional MoS2 Transistors with Electrolyte Gel Gating.

MoS2 , one of the most valued 2D materials beyond graphene, shows potential for future applications in postsilicon digital electronics and optoelectronics. However, achieving hole transport in MoS2 , which is dominated by electron transport, is always a challenge. Here, MoS2 transistors gated by electrolyte gel exhibit the characteristics of hole and electron transport, a high on/off ratio over 105 , and a low subthreshold swing below 50 mV per decade. Due to the electrolyte gel, the density of electrons and holes in the MoS2 channel reaches ≈9 × 1013 and 8.85 × 1013 cm-2 , respectively. The electrolyte gel-assisted MoS2 phototransistor exhibits adjustable positive and negative photoconductive effects. Additionally, the MoS2 p-n homojunction diode affected by electrolyte gel shows high performance and a rectification ratio over 107 . These results demonstrate that modifying the conductance of MoS2 through electrolyte gel has great potential in highly integrated electronics and optoelectronic photodetectors.

A Dual-Gate MoS2 Photodetector Based on Interface Coupling Effect.

2D transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response speed and responsivity (R) and large dark current. Here, a dual-gated (DG) MoS2 phototransistor operating based on the interface coupling effect (ICE) is demonstrated. By simultaneously applying a negative top-gate voltage (VTG ) and positive back-gate voltage (VBG ) to the MoS2 channel, the photogenerated holes can be effectively trapped in the depleted region under TG. An ultrahigh R of ≈105 A W-1 and detectivity (D*) of ≈1014 Jones are achieved in several devices with different thickness under Pin of 53 µW cm-2 at VTG = -5 V. Moreover, the response time of the DG phototransistor can also be modulated based on the ICE. Based on these systematic measurements of MoS2 DG phototransistors, the results show that the ICE plays an important role in the modulation of photoelectric performances. The results also pave the way for the future optoelectrical application of 2D TMDs materials and prompt for further investigation in the DG structured phototransistors.

Wafer-scale transferred multilayer MoS2 for high performance field effect transistors.

Chemical vapor deposition synthesis of semiconducting transition metal dichalcogenides (TMDs) offers a new route to build next-generation semiconductor devices. But realization of continuous and uniform multilayer (ML) TMD films is still limited by their specific growth kinetics, such as the competition between surface and interfacial energy. In this work, a layer-by-layer vacuum stacking transfer method is applied to obtain uniform and non-destructive ML-MoS2 films. Back-gated field effect transistor (FET) arrays of 1L- and 2L-MoS2 are fabricated on the same wafer, and their electrical performances are compared. We observe a significant increase of field-effect mobility for 2L-MoS2 FETs, up to 32.5 cm2 V-1 s-1, which is seven times higher than that of 1L-MoS2 (4.5 cm2 V-1 s-1). Then we also fabricated 1L-, 2L-, 3L-, and 4L-MoS2 FETs to further investigate the thickness-dependent characteristics of transferred ML-MoS2. Measurement results show a higher mobility but a smaller current on/off ratio as the layer number increases, suggesting that a balance between mobility and current on/off ratio can be achieved in 2L- and 3L-MoS2 FETs. Dual-gated structure is also investigated to demonstrate an improved electrostatic control of the ML-MoS2 channel.

Charge-Trap Memory Based on Hybrid 0D Quantum Dot-2D WSe2 Structure.

Recently, layered ultrathin 2D semiconductors, such as MoS2 and WSe2 are widely studied in nonvolatile memories because of their excellent electronic properties. Additionally, discrete 0D metallic nanocrystals and quantum dots (QDs) are considered to be outstanding charge-trap materials. Here, a charge-trap memory device based on a hybrid 0D CdSe QD-2D WSe2 structure is demonstrated. Specifically, ultrathin WSe2 is employed as the channel of the memory, and the QDs serve as the charge-trap layer. This device shows a large memory window exceeding 18 V, a high erase/program current ratio (reaching up to 104 ), four-level data storage ability, stable retention property, and high endurance of more than 400 cycles. Moreover, comparative experiments are carried out to prove that the charges are trapped by the QDs embedded in the Al2 O3 . The combination of 2D semiconductors with 0D QDs opens up a novelty field of charge-trap memory devices.

High-Performance Wafer-Scale MoS2 Transistors toward Practical Application.

Atomic thin transition-metal dichalcogenides (TMDs) are considered as an emerging platform to build next-generation semiconductor devices. However, to date most devices are still based on exfoliated TMD sheets on a micrometer scale. Here, a novel chemical vapor deposition synthesis strategy by introducing multilayer (ML) MoS2 islands to improve device performance is proposed. A four-probe method is applied to confirm that the contact resistance decreases by one order of magnitude, which can be attributed to a conformal contact by the extra amount of exposed edges from the ML-MoS2 islands. Based on such continuous MoS2 films synthesized on a 2 in. insulating substrate, a top-gated field effect transistor (FET) array is fabricated to explore key metrics such as threshold voltage (V T ) and field effect mobility (µFE ) for hundreds of MoS2 FETs. The statistical results exhibit a surprisingly low variability of these parameters. An average effective µFE of 70 cm2 V-1 s-1 and subthreshold swing of about 150 mV dec-1 are extracted from these MoS2 FETs, which are comparable to the best top-gated MoS2 FETs achieved by mechanical exfoliation. The result is a key step toward scaling 2D-TMDs into functional systems and paves the way for the future development of 2D-TMDs integrated circuits.

Hybrid coupling enhances photoluminescence of monolayer MoS2 on plasmonic nanostructures.

The efficiency of photoluminescence (PL) of transition-metal dichalcogenides (TMDCs) significantly influences their practical applications in optoelectronic devices. In this work, we study multiple coupling among excitons, surface plasmons, and optical modes, and their effects on PL of monolayer MoS2 atop plasmonic nanohole arrays. Under the illumination of visible light, strong intensity enhancement of PL from monolayer MoS2 is observed in the system. We further demonstrate that there exist excitons induced from MoS2, localized and propagating surface plasmons excited from nanoholes, and optical modes related to the incident laser. And hybrid coupling of those modes significantly improves the PL signals and also lightens the PL images of monolayer MoS2. This work provides a unique way to improve the emission of monolayer TMDCs. The atomically thin TMDCs coupled to plasmonic metamaterials are also promising for advanced applications such as ultrathin integrated light-emission diodes, photodetection, and nanolasers.

2D negative capacitance field-effect transistor with organic ferroelectrics.

In the past fifty years, complementary metal-oxide-semiconductor integrated circuits have undergone significant development, but Moore's law will soon come to an end. In order to break through the physical limit of Moore's law, 2D materials have been widely used in many electronic devices because of their high mobility and excellent mechanical flexibility. And the emergence of a negative capacitance field-effect transistor (NCFET) could not only break the thermal limit of conventional devices, but reduce the operating voltage and power consumption. This paper demonstrates a 2D NCFET that treats molybdenum disulfide as a channel material and organic P(VDF-TrFE) as a gate dielectric directly. This represents a new attempt to prepare NCFETs and produce flexible electronic devices. It exhibits a 10^6 on-/off-current ratio. And the minimum subthreshold swing (SS) of the 21 mV/decade and average SS of the 44 mV/decade in four orders of magnitude of drain current can also be observed at room temperature of 300 K.

Progress of Large-Scale Synthesis and Electronic Device Application of Two-Dimensional Transition Metal Dichalcogenides.

The recent exploration of semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) with atomic thickness has taken both the scientific and technological communities by storm. Extensively investigated TMD that are accessible by large-scale synthetic methods materials are remarkably stable, such as MoS2 and WSe2 . They allow superior gate control due to their 2D nature and favorable electronic transport properties, thus suggesting a bright future for digital and RF electronics. In this review, the latest developments in the controlled synthesis of large scale TMDs are firstly introduced by discussing various approaches. The major obstacles that must be overcome to achieve wafer-scale, uniform, and high-quality TMD films for practical electronic applications are included. Advances in the electronic transport studies of TMDs are presented, such as doping, contact engineering, and mobility improvement, which contribute to overall device performance. A perspective and a look at the future for this field is provided in closing.

Tunable SnSe2 /WSe2 Heterostructure Tunneling Field Effect Transistor.

The burgeoning 2D semiconductors can maintain excellent device electrostatics with an ultranarrow channel length and can realize tunneling by electrostatic gating to avoid deprivation of band-edge sharpness resulting from chemical doping, which make them perfect candidates for tunneling field effect transistors. Here this study presents SnSe2 /WSe2 van der Waals heterostructures with SnSe2 as the p-layer and WSe2 as the n-layer. The energy band alignment changes from a staggered gap band offset (type-II) to a broken gap (type-III) when changing the negative back-gate voltage to positive, resulting in the device operating as a rectifier diode (rectification ratio ~104 ) or an n-type tunneling field effect transistor, respectively. A steep average subthreshold swing of 80 mV dec-1 for exceeding two decades of drain current with a minimum of 37 mV dec-1 at room temperature is observed, and an evident trend toward negative differential resistance is also accomplished for the tunneling field effect transistor due to the high gate efficiency of 0.36 for single gate devices. The ION /IOFF ratio of the transfer characteristics is >106 , accompanying a high ON current >10-5 A. This work presents original phenomena of multilayer 2D van der Waals heterostructures which can be applied to low-power consumption devices.

Various and Tunable Transport Properties of WSe2 Transistor Formed by Metal Contacts.

The abundant electronic and optical properties of 2D materials that are just one-atom thick pave the way for many novel electronic applications. One important application is to explore the band-to-band tunneling in the heterojunction built by different 2D materials. Here, a gate-controlled WSe2 transistor is constructed by using different work function metals to form the drain (Pt) and source (Cr) electrodes. The device can be gate-modulated to exhibit three modes of operation, i.e., the tunneling mode with remarkable negative differential resistance, the transition mode with a second electron tunneling phenomenon for backward bias, and finally the conventional diode mode with rectifying characteristics. In contrast to the heterojunctions built by different 2D materials, these devices show significantly enhanced tunneling current by two orders of magnitude, which may largely benefit from the clean interfaces. These results pave the way toward design of novel electronic devices using the modulation of metal work functions.

WSe2/MoS2 and MoTe2/SnSe2 van der Waals heterostructure transistors with different band alignment.

Heterostructure field-effect transistors (hetero-FETs) are experimentally demonstrated, consisting of van der Waals heterostructure channels based on a 2D semiconductor. By optimally selecting the band alignment of the heterostructure channels, different output characteristics of the hetero-FETs were achieved. In atomically thin WSe2/MoS2 hetero-FET with staggered energy band, the oscillating transfer characteristic and negative transconductance were realized. With near-broken-gap alignment in the MoTe2/SnSe2 heterostructure channel, a superior reverse-biased current was obtained in the hetero-FETs, which can be analyzed as typical tunneling current. Our study on the hetero-FET-based atomically thin van der Waals heterostructure channel, provides significant inspiration and reference to novel heterostructure FETs.