Cluster-Assembled Nanoporous Super-Hydrophilic Smart Surfaces for On-Target Capturing and Processing of Biological Samples for Multi-Dimensional MALDI-MS.

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) on cluster-assembled super-hydrophilic nanoporous titania films deposited on hydrophobic conductive-polymer substrates feature a unique combination of surface properties that significantly improve the possibilities of capturing and processing biological samples before and during the MALDI-MS analysis without changing the selected sample target (multi-dimensional MALDI-MS). In contrast to pure hydrophobic surfaces, such films promote a remarkable biologically active film porosity at the nanoscale due to the soft assembling of ultrafine atomic clusters. This unique combination of nanoscale porosity and super-hydrophilicity provides room for effective sample capturing, while the hydrophilic-hydrophobic discontinuity at the border of the dot-patterned film acts as a wettability-driven containment for sample/reagent droplets. In the present work, we evaluate the performance of such advanced surface engineered reactive containments for their benefit in protein sample processing and characterization. We shortly discuss the advantages resulting from the introduction of the described chips in the MALDI-MS workflow in the healthcare/clinical context and in MALDI-MS bioimaging (MALDI-MSI).

Long-term outdoor reliability assessment of a wireless unit for air-quality monitoring based on nanostructured films integrated on micromachined platforms.

We have fabricated and tested in long-term field operating conditions a wireless unit for outdoor air quality monitoring. The unit is equipped with two multiparametric sensors, one miniaturized thermo-hygrometer, front-end analogical and digital electronics, and an IEEE 802.15.4 based module for wireless data transmission. Micromachined platforms were functionalized with nanoporous metal-oxides to obtain multiparametric sensors, hosting gas-sensitive, anemometric and temperature transducers. Nanoporous metal-oxide layer was directly deposited on gas sensing regions of micromachined platform batches by hard-mask patterned supersonic cluster beam deposition. An outdoor, roadside experiment was arranged in downtown Milan (Italy), where one wireless sensing unit was continuously operated side by side with standard gas chromatographic instrumentation for air quality measurements. By means of a router PC, data from sensing unit and other instrumentation were collected, merged, and sent to a remote data storage server, through an UMTS device. The whole-system robustness as well as sensor dataset characteristics were continuously characterized over a run-time period of 18 months.

Widely Tuneable Composition and Crystallinity of Graded Na1+xTaO3±Î´ Thin Films Fabricated by Chemical Beam Vapor Deposition.

Combinatorial approach has been widely recognized as a powerful strategy to develop new-higher performance materials and shed the light on the stoichiometry-dependent properties of known systems. Herein, we take advantage of the unique features of chemical beam vapor deposition to fabricate compositionally graded Na1+xTaO3±Î´ thin films with −0.6 < x < 0.5. Such a varied composition was enabled by the ability of the employed technique to deliver and combine an extensive range of precursors flows over the same deposition area. The film growth occurred in a complex process, where precursor absolute flows, flow ratios, and substrate temperature played a role. The deviation of the measured Na/Ta ratios from those predicted by flow simulations suggests that a chemical-reaction limited regime underlies the growth mechanism and highlights the importance of the Ta precursor in assisting the decomposition of the Na one. The crystallinity was observed to be strongly dependent on its stoichiometry. High under-stoichiometries (e.g., Na0.5TaO3−δ) compared to NaTaO3 were detrimental for the formation of a perovskite framework, owing to the excessive amount of sodium vacancies and oxygen vacancies. Conversely, a well-crystallized orthorhombic perovskite structure peculiar of NaTaO3 was observed from mildly under-stoichiometric (e.g., Na0.9TaO3−δ) to highly over-stoichiometric (e.g., Na1.5TaO3+δ) compositions.

Characterization of cluster-assembled nanostructured titanium oxide coatings as substrates for protein arrays.

Protein microarray technologies are rapidly expanding to fulfill current needs of proteome discovery for disease management. Nanostructured materials have been shown to present interesting features when used in biological settings: nanostructured titanium oxide film (ns-TiOx), synthesized by supersonic cluster beam deposition (SCBD), has recently emerged as a biocompatible substrate in different biological assays. The ns-TiOx surface is characterized by a morphology at the nanoscale that can be tuned to modulate specific biomolecule-material interactions. Here we present a systematic characterization of ns-TiOx coatings as protein binding surfaces, comparing their performances with those of most common commercial substrates in protein and antibody microarray assays. Through a robust statistical evaluation of repeatability in terms of coefficient of variation (CV) analysis, we demonstrate that ns-TiOx can be used as reliable substrate for biochips in analytical protein microarray application.

Lactate-Induced Glucose Output Is Unchanged by Metformin at a Therapeutic Concentration - A Mass Spectrometry Imaging Study of the Perfused Rat Liver.

Metformin is the first line drug for type 2 diabetes but its molecular mechanisms remain unclear. Here, we have studied the acute effect of a therapeutically relevant intrahepatic concentration of metformin on glucose production from lactate. We selected the perfused rat liver as experimental system since it enables the complete control of drug dosage. We used MALDI (matrix-assisted laser desorption/ionization) mass spectrometry imaging to estimate the concentration of metformin in the livers and we measured the concentration of glucose in the effluent medium under basal conditions and following lactate addition. MALDI mass spectra of thin-sections of freeze-clamped rat liver perfused with metformin showed a peak at 130.16 m/z which was unambiguously assigned to metformin. The mass spectrometric detection limit was at a tissue concentration of about 250 nM, and uptake of metformin from the perfusion medium to the liver occurred with a Km of 0.44 mM. Metformin was evenly distributed in the liver irrespective of its concentration in the perfusion medium and the duration of a perfusion. At a parenchymal concentration of 30 µM, metformin did not induce any significant suppression of the basal or lactate-induced glucose release from the liver. These results show that matrix-assisted laser desorption/ionization mass spectrometry imaging can be applied to estimate the tissue concentration and distribution of metformin in a therapeutically relevant micromolar concentration range. Our findings challenge the view that metformin causes an inhibition of glucose release from the liver by an acute inhibition of mitochondrial glycerol 3-phosphate dehydrogenase (EC 1.1.5.3).

microFIND(®) approach to fluorescent in situ hybridization (FISH).

FISH technology has gained increasing attention in the management of cancer disease, either for predictive or prognostic indications. Molecular cytogenetics has greatly improved diagnostic capability of classical cytogenetics analysis of metaphase-based chromosome for the identification of genetic aberrations. The availability of a large number of fluorescent probes, each specific for different genetic lesions, together with a robust protocol for interphase FISH, provide the pathologist with the essential tools for an accurate evaluation of patient's disease. Hemato-oncological and many of the solid tumors have been comprehensively characterized by peculiar genetic defects and are now routinely evaluated by interphase FISH. Despite the reliability of the method, which has undergone only minor changes since the 1970s, FISH assay is still hampered by reagents cost, preventing its adoption in large-scale oncological screening. In this chapter we describe a major improvement of interphase FISH assay for cytological samples through the description of the miniaturized device microFIND(®) that offers, besides reduction of cost per assay, a completely novel vision to the FISH technology, thanks to the perspective of full automation of FISH assay using a dedicated robotic platform for microFIND(®) handling, (not presently described in the chapter).

Miniaturized FISH for screening of onco-hematological malignancies.

Fluorescence in situ hybridization (FISH) represents a major step in the analysis of chromosomal aberrations in cancer. It allows the precise detection of specific rearrangements, both for diagnostic and prognostic purposes. Here we present a miniaturized FISH method performed on fresh and fixed hematological samples. This procedure has been developed together with a microfluidic device that integrates cluster-assembled nanostructured TiO2 (ns-TiO2) as a nanomaterial promoting hematopoietic cell immobilization in conditions of shear stress. As a result of miniaturization, FISH can be performed with at least a 10-fold reduction in probe usage and minimal cell requirements, creating the possibility of using FISH in genetic screening applications. We developed the protocol on tumor cells and bone marrow (BM) from a normal donor using commercially sex-specific and onco-hematology probes. The procedure was then validated using either BM or peripheral blood (PB) from six patients with hematological diseases, each associated with different genetic lesions. Miniaturized FISH demonstrated comparable performance to standard FISH, indicating that it is suitable for genetic screenings, in research, and in clinical settings for the diagnosis of samples from onco-hematological malignancies.