Biocompatible Cationic Lipoamino Acids as Counterions for Oral Administration of API-Ionic Liquids.

PURPOSE: The use of ionic liquids (ILs) in drug delivery has focused attention on non-toxic IL counterions. Cationic lipids can be used to form ILs with weakly acidic drugs to enhance drug loading in lipid-based formulations (LBFs). However, cationic lipids are typically toxic. Here we explore the use of lipoaminoacids (LAAs) as cationic IL counterions that degrade or digest in vivo to non-toxic components. METHODS: LAAs were synthesised via esterification of amino acids with fatty alcohols to produce potentially digestible cationic LAAs. The LAAs were employed to form ILs with tolfenamic acid (Tol) and the Tol ILs loaded into LBF and examined in vitro and in vivo. RESULTS: Cationic LAAs complexed with Tol to generate lipophilic Tol ILs with high drug loading in LBFs. Assessment of the LAA under simulated digestion conditions revealed that they were susceptible to enzymatic degradation under intestinal conditions, forming biocompatible FAs and amino acids. In vitro dispersion and digestion studies of Tol ILs revealed that formulations containing digestible Tol ILs were able to maintain drug dispersion and solubilisation whilst the LAA were breaking down under digesting conditions. Finally, in vivo oral bioavailability studies demonstrated that oral delivery of a LBF containing a Tol IL comprising a digestible cationic lipid counterion was able to successfully support effective oral delivery of Tol. CONCLUSIONS: Digestible LAA cationic lipids are potential IL counterions for weakly acidic drug molecules and digest in situ to form non-toxic breakdown products.

Computational and Experimental Models of Type III Lipid-Based Formulations of Loratadine Containing Complex Nonionic Surfactants.

Type III lipid-based formulations (LBFs) combine poorly water-soluble drugs with oils, surfactants, and cosolvents to deliver the drugs into the systemic circulation. However, the solubility of the drug can be influenced by the colloidal phases formed in the gastrointestinal tract as the formulation is dispersed and makes contact with bile and other materials present within the GI tract. Thus, an understanding of the phase behavior of LBFs in the gut is critical for designing efficient LBFs. Molecular dynamics (MD) simulation is a powerful tool for the study of colloidal systems. In this study, we modeled the internal structures of five type III LBFs of loratadine containing poly(ethylene oxide) nonionic surfactants polysorbate 80 and polyoxyl hydrogenated castor oil (Kolliphor RH40) using long-timescale MD simulations (0.4-1.7 µs). We also conducted experimental investigations (dilution of formulations with water) including commercial Claritin liquid softgel capsules. The simulations show that LBFs form continuous phase, water-swollen reverse micelles, and bicontinuous and phase-separated systems at different dilutions, which correlate with the experimental observations. This study supports the use of MD simulation as a predictive tool to determine the fate of LBFs composed of medium-chain lipids, polyethylene oxide surfactants, and polymers.

Lipophilic Salts and Lipid-Based Formulations: Enhancing the Oral Delivery of Octreotide.

PURPOSE: Successful oral peptide delivery faces two major hurdles: low enzymatic stability in the gastro-intestinal lumen and poor intestinal membrane permeability. While lipid-based formulations (LBF) have the potential to overcome these barriers, effective formulation of peptides remains challenging. Lipophilic salt (LS) technology can increase the apparent lipophilicity of peptides, making them more suitable for LBF. METHODS: As a model therapeutic peptide, octreotide (OCT) was converted to the docusate LS (OCT.DoS2), and compared to the commercial acetate salt (OCT.OAc2) in oral absorption studies and related in vitro studies, including parallel artificial membrane permeability assay (PAMPA), Caco-2, in situ intestine perfusion, and simulated digestion in vitro models. The in vivo oral absorption of OCT.DoS2 and OCT.OAc2 formulated in self-emulsifying drug delivery systems (SEDDS) was studied in rats. RESULTS: LS formulation improved the solubility and loading of OCT in LBF excipients and OCT.DoS2 in combination with SEDDS showed higher OCT absorption than the acetate comparator in the in vivo studies in rats. The Caco-2 and in situ intestine perfusion models indicated no increases in permeability for OCT.DoS2. However, the in vitro digestion studies showed reduced enzymatic degradation of OCT.DoS2 when formulated in the SEDDS formulations. Further in vitro dissociation and release studies suggest that the enhanced bioavailability of OCT from SEDDS-incorporating OCT.DoS2 is likely a result of higher partitioning into and prolonged retention within lipid colloid structures. CONCLUSION: The combination of LS and LBF enhanced the in vivo oral absorption of OCT primarily via the protective effect of LBF sheltering the peptide from gastrointestinal degradation.

Molecular Dynamics Simulations and Experimental Results Provide Insight into Clinical Performance Differences between Sandimmune® and Neoral® Lipid-Based Formulations.

OBJECTIVE: Molecular dynamics (MD) simulations provide an in silico method to study the structure of lipid-based formulations (LBFs) and the incorporation of poorly water-soluble drugs within such formulations. In order to validate the ability of MD to effectively model the properties of LBFs, this work investigates the well-known cyclosporine A formulations, Sandimmune® and Neoral®. Sandimmune® exhibits poor dispersibility and its absorption from the gastrointestinal tract is enhanced when administered after food, whereas Neoral® disperses comparatively well and shows no food effect. METHODS: MD simulations were performed of both LBFs to investigate the differences observed in fasted and fed conditions. These conditions were also tested using an in vitro experimental model of dispersion and digestion. RESULTS: These MD simulations were able to show that the food effect observed for Sandimmune® can be explained by large changes in drug solubilization on addition of bile. In contrast, Neoral® is well dispersed in water or in simulated fasted conditions, and this dispersion is relatively unchanged on moving to fed conditions. These differences were confirmed using dispersion and digestion in vitro experimental model. CONCLUSIONS: The current data suggests that MD simulations are a potential method to model the fate of LBFs in the gastrointestinal tract, predict their dispersion and digestion, investigate behaviour of APIs within the formulations, and provide insights into the clinical performance of LBFs.

Enhancing the Oral Absorption of Kinase Inhibitors Using Lipophilic Salts and Lipid-Based Formulations.

The absolute bioavailability of many small molecule kinase inhibitors (smKIs) is low. The reasons for low bioavailability are multifaceted and include constraints due to first pass metabolism and poor absorption. For smKIs where absorption limits oral bioavailability, low aqueous solubility and high lipophilicity, often in combination with high-dose requirements have been implicated in low and variable absorption, food-effects, and absorption-related drug-drug interactions. The current study has evaluated whether preparation of smKIs as lipophilic salts/ionic liquids in combination with coadministration with lipid-based formulations is able to enhance absorption for examples of this compound class. Lipophilic (docusate) salt forms of erlotinib, gefitinib, ceritinib, and cabozantinib (as example smKIs demonstrating low aqueous solubility and high lipophilicity) were prepared and isolated as workable powder solids. In each case, the lipophilic salt exhibited high and significantly enhanced solubility in lipidic excipients (>100 mg/g) when compared to the free base or commercial salt form. Isolation as the lipophilic salt facilitated smKI loading in model lipid-based formulations at high concentration, increased in vitro solubilization at gastric and intestinal pH and in some cases increased oral absorption (∼2-fold for cabozantinib formulations in rats). Application of a lipophilic salt approach can therefore facilitate the use of lipid-based formulations for examples of the smKI compound class where low solubility limits absorption and is a risk factor for increased variability due to food-effects.

Computational Models of the Intestinal Environment. 3. The Impact of Cholesterol Content and pH on Mixed Micelle Colloids.

In this study, we use molecular dynamics (MD) and experimental techniques (nephelometry and dynamic light scattering) to investigate the influence of cholesterol content and pH on the colloidal structures that form in the gastrointestinal (GI) tract upon lipid digestion. We demonstrate that the ionization state of the molecular species is a primary driver for the self-assembly of aggregates formed by model bile and therefore should be considered when performing in silico modeling of colloidal drug delivery systems. Additionally, the incorporation of physiological concentrations of cholesterol within the model systems does not affect size, number, shape, or dynamics of the aggregates to a significant degree. The MD data shows a reduction in aggregate size with increasing pH, a preference for glycodeoxycholate (GDX) to occupy the aggregate surface, and that the mixed micellar aggregates are oblate spheroids (disc-like). The results obtained assist in understanding the process by which pH and cholesterol influence self-assembly of mixed micelles within the GI tract. The MD approach provides a platform for investigation of interactions of drugs and formulation excipients with the endogenous contents of the GI tract.

Computational Models of the Gastrointestinal Environment. 1. The Effect of Digestion on the Phase Behavior of Intestinal Fluids.

Improved models of the gastrointestinal environment have great potential to assist the complex process of drug formulation. Molecular dynamics (MD) is a powerful method for investigating phase behavior at a molecular level. In this study we use multiple MD simulations to calculate phase diagrams for bile before and after digestion. In these computational models, undigested bile is represented by mixtures of palmitoyl-oleoylphosphatidylcholine (POPC), sodium glycodeoxycholate (GDX), and water. Digested bile is modeled using a 1:1 mixture of oleic acid and palmitoylphosphatidylcholine (lysophosphatidylcholine, LPC), GDX, and water. The computational phase diagrams of undigested and digested bile are compared, and we describe the typical intermolecular interactions that occur between phospholipids and bile salts. The diffusion coefficients measured from MD simulation are compared to experimental diffusion data measured by DOSY-NMR, where we observe good qualitative agreement. In an additional set of simulations, the effect of different ionization states of oleic acid on micelle formation is investigated.

Computational Models of the Gastrointestinal Environment. 2. Phase Behavior and Drug Solubilization Capacity of a Type I Lipid-Based Drug Formulation after Digestion.

Lipid-based drug formulations can greatly enhance the bioavailability of poorly water-soluble drugs. Following the oral administration of formulations containing tri- or diglycerides, the digestive processes occurring within the gastrointestinal (GI) tract hydrolyze the glycerides to mixtures of free fatty acids and monoglycerides that are, in turn, solubilized by bile. The behavior of drugs within the resulting colloidal mixtures is currently not well characterized. This work presents matched in vitro experimental and molecular dynamics (MD) theoretical models of the GI microenvironment containing a digested triglyceride-based (Type I) drug formulation. Both the experimental and theoretical models consist of molecular species representing bile (glycodeoxycholic acid), digested triglyceride (1:2 glyceryl-1-monooleate and oleic acid), and water. We have characterized the phase behavior of the physical system using nephelometry, dynamic light scattering, and polarizing light microscopy and compared these measurements to phase behavior observed in multiple MD simulations. Using this model microenvironment, we have investigated the dissolution of the poorly water-soluble drug danazol experimentally using LC-MS and theoretically by MD simulation. The results show how the formulation lipids alter the environment of the GI tract and improve the solubility of danazol. The MD simulations successfully reproduce the experimental results showing the utility of MD in modeling the fate of drugs after digestion of lipid-based formulations within the intestinal lumen.

Toward the establishment of standardized in vitro tests for lipid-based formulations. 5. Lipolysis of representative formulations by gastric lipase.

PURPOSE: Lipid-based formulations (LBF) are substrates for digestive lipases and digestion can significantly alter their properties and potential to support drug absorption. LBFs have been widely examined for their behaviour in the presence of pancreatic enzymes. Here, the impact of gastric lipase on the digestion of representative formulations from the Lipid Formulation Classification System has been investigated. METHODS: The pHstat technique was used to measure the lipolysis by recombinant dog gastric lipase (rDGL) of eight LBFs containing either medium (MC) or long (LC) chain triglycerides and a range of surfactants, at various pH values [1.5 to 7] representative of gastric and small intestine contents under both fasting and fed conditions. RESULTS: All LBFs were hydrolyzed by rDGL. The highest specific activities were measured at pH 4 with the type II and IIIA MC formulations that contained Tween®85 or Cremophor EL respectively. The maximum activity on LC formulations was recorded at pH 5 for the type IIIA-LC formulation. Direct measurement of LBF lipolysis using the pHstat, however, was limited by poor LC fatty acid ionization at low pH. CONCLUSIONS: Since gastric lipase initiates lipid digestion in the stomach, remains active in the intestine and acts on all representative LBFs, its implementation in future standardized in vitro assays may be beneficial. At this stage, however, routine use remains technically challenging.

An in vitro digestion test that reflects rat intestinal conditions to probe the importance of formulation digestion vs first pass metabolism in Danazol bioavailability from lipid based formulations.

The impact of gastrointestinal (GI) processing and first pass metabolism on danazol oral bioavailability (BA) was evaluated after administration of self-emulsifying drug delivery systems (SEDDS) in the rat. Danazol absolute BA was determined following oral and intraduodenal (ID) administration of LFCS class IIIA medium chain (MC) formulations at high (SEDDSH-III) and low (SEDDSL-III) drug loading and a lipid free LFCS class IV formulation (SEDDS-IV). Experiments were conducted in the presence and absence of ABT (1-aminobenzotriazole) to evaluate the effect of first pass metabolism. A series of modified in vitro lipolysis tests were developed to better understand the in vivo processing of SEDDS in the rat. Danazol BA was low (<13%) following oral and ID administration of either SEDDS. Increasing drug loading, ID rather than oral administration, and administration of SEDDS-IV rather than SEDDS-III led to higher oral BA. After pretreatment with ABT, however, danazol oral BA significantly increased (e.g., 60% compared to 2% after administration of SEDDSL-III), no effect was observed on increasing drug loading, and differences between SEDDS-III and -IV were minimal. In vitro digestion models based on the lower enzyme activity and lower dilution conditions expected in the rat resulted in significantly reduced danazol precipitation from SEDDS-III or SEDDS-IV on initiation of digestion. At the doses administered here (4-8 mg/kg), the primary limitation to danazol oral BA in the rat was first pass metabolism, and the fraction absorbed was >45% after oral administration of SEDDS-III or SEDDS-IV. In contrast, previous studies in dogs suggest that danazol BA is less dependent on first pass metabolism and more sensitive to changes in formulation processing. In vitro digestion models based on likely rat GI conditions suggest less drug precipitation on formulation digestion when compared to equivalent dog models, consistent with the increases in in vivo exposure (fraction absorbed) seen here in ABT-pretreated rats.

Digestion of phospholipids after secretion of bile into the duodenum changes the phase behavior of bile components.

Bile components play a significant role in the absorption of dietary fat, by solubilizing the products of fat digestion. The absorption of poorly water-soluble drugs from the gastrointestinal tract is often enhanced by interaction with the pathways of fat digestion and absorption. These processes can enhance drug absorption. Thus, the phase behavior of bile components and digested lipids is of great interest to pharmaceutical scientists who seek to optimize drug solubilization in the gut lumen. This can be achieved by dosing drugs after food or preferably by formulating the drug in a lipid-based delivery system. Phase diagrams of bile salts, lecithin, and water have been available for many years, but here we investigate the association structures that occur in dilute aqueous solution, in concentrations that are present in the gut lumen. More importantly, we have compared these structures with those that would be expected to be present in the intestine soon after secretion of bile. Phosphatidylcholines are rapidly hydrolyzed by pancreatic enzymes to yield equimolar mixtures of their monoacyl equivalents and fatty acids. We constructed phase diagrams that model the association structures formed by the products of digestion of biliary phospholipids. The micelle-vesicle phase boundary was clearly identifiable by dynamic light scattering and nephelometry. These data indicate that a significantly higher molar ratio of lipid to bile salt is required to cause a transition to lamellar phase (i.e., liposomes in dilute solution). Mixed micelles of digested bile have a higher capacity for solubilization of lipids and fat digestion products and can be expected to have a different capacity to solubilize lipophilic drugs. We suggest that mixtures of lysolecithin, fatty acid, and bile salts are a better model of molecular associations in the gut lumen, and such mixtures could be used to better understand the interaction of drugs with the fat digestion and absorption pathway.

Non-linear increases in danazol exposure with dose in older vs. younger beagle dogs: the potential role of differences in bile salt concentration, thermodynamic activity, and formulation digestion.

PURPOSE: To explore the possibility that age-related changes in physiology may result in differences in drug bioavailability after oral administration of lipid based formulations of danazol. METHODS: Danazol absorption from lipid formulations with increasing drug load was examined in younger (9 months) and older (8 years) beagles. Age related changes to hepatic function were assessed via changes to systemic clearance and serum bile acid concentrations. Changes to lipolytic enzyme activity and intestinal bile salt concentration were evaluated using in vitro lipolysis. RESULTS: Drug exposure increased linearly with dose in younger animals. In older animals, bioavailability increased with increasing dose to a tipping point, beyond which bioavailability reduced (consistent with initiation of precipitation). No differences in hepatic function were apparent across cohorts. Changes to enzyme concentrations in lipolysis studies had little impact on drug precipitation/solubilisation. In contrast, higher bile salt concentrations better supported supersaturation at higher drug loads. CONCLUSIONS: Differences in animal cohort can have a significant impact on drug absorption from lipid based formulation. For danazol, bioavailability was enhanced under some circumstances in older animals. In vitro experiments suggest that this was unlikely to reflect changes to metabolism or lipolysis, but might be explained by increases in luminal bile salt/phospholipid concentrations in older animals.

Evaluation of the structural determinants of polymeric precipitation inhibitors using solvent shift methods and principle component analysis.

The presence of polymers within solid dose forms, such as solid dispersions, or liquid or semisolid formulations, such as lipid-based formulations, can promote the maintenance of drug supersaturation after dissolution or dispersion/digestion of the vehicle in the gastrointestinal tract. Transiently stable supersaturation delays precipitation, increases thermodynamic activity, and may enhance bioavailability and reduce variability in exposure. In the current study a diverse range of 42 different classes of polymers, with a total of 78 polymers across all classes, grades, and molecular weights were examined, to varying degrees, as potential polymeric precipitation inhibitors (PPIs) using a solvent shift method to initiate supersaturation. To provide a deeper understanding of the molecular determinants of polymer utility the data were also analyzed, along with a range of physicochemical descriptors of the polymers employed, using principle component analysis (PCA). Polymers were selectively tested for their ability to stabilize supersaturation for nine poorly water-soluble model drugs, representing a range of nonelectrolytes, weak acids, and weak bases. In general, the cellulose-based polymers (and in particular hydroxypropylmethyl cellulose, HPMC, and its derivatives) provided robust precipitation inhibition across most of the drugs tested. Subsequent PCA indicate that there is consistent PPI behavior of a given polymer for a given drug type, with clear clustering of the performance of polymers with each of the nonelectrolytes, weak bases, and weak acids. However, there are some exceptions to this, with some specific drug type-polymer interactions also occurring. Polymers containing primary amine functional groups should be avoided as they are prone to enhancing precipitation rates. An inverse relationship was also documented for the number of amide, carboxylic acid, and hydroxyl functional groups; therefore for general good PPI performance the number of these contained within the polymer should be minimized. Molecular weight is a poor predictor of performance, having only a minor influence, and in some cases a higher molecular weight enhances the precipitation process. The importance of ionic interactions to the ability of a PPI to stabilize the supersaturated state was demonstrated by the advantage of choosing a polymer with an opposite charge with respect to the drug. Additionally, when the polymer charge is the same as the supersaturated drug, precipitation is likely to be enhanced. A PCA model based on polymer molecular properties is presented, which has a central oval region where the polymer will general perform well across all three drug types. If the polymer is located outside of this region, then they either show compound-specific inhibition or enhance precipitation. Incomplete separation of the PPI performance based on the molecular properties on the polymers indicates that there are some further molecular properties that might improve the correlation.

Glyceride lipid formulations: molecular dynamics modeling of phase behavior during dispersion and molecular interactions between drugs and excipients.

PURPOSE: Little is known about the microstructure of lipid-based formulations, or how their structure changes as they disperse in the lumen of the gastrointestinal tract. We used molecular dynamics (MD) simulation to study such formulations at the molecular level as they interact with water during dispersion. METHODS: We studied a simple lipid formulation, by itself and in the presence of drugs. The formulation contained mono- and di-lauroyl glycerides at 0-75% (w)/w water. Acyclovir, danazol, hydrocortisone, ketoprofen or progesterone, were included to investigate their dynamic behavior and localization during dispersion. RESULTS: Micro-structuring of the formulation was evident at all water concentrations. As the water content increased, the microstructure evolved from a continuous phase containing isolated water molecules, to a reverse micellar solution and finally to a system containing lamellar lipids with large pools of free water. Drugs partitioned into the aqueous and lipid domains principally under the influence of hydrogen bonding and hydrophobic interactions. Drugs located preferentially to the interfaces between water and lipid where they are able to make both hydrophobic and hydrophilic interactions. CONCLUSION: Molecular dynamics simulations offer an unprecedented view of the structure of lipid-based formulations and has considerable potential as an in silico tool for formulators.

Toward the establishment of standardized in vitro tests for lipid-based formulations, part 3: understanding supersaturation versus precipitation potential during the in vitro digestion of type I, II, IIIA, IIIB and IV lipid-based formulations.

PURPOSE: Recent studies have shown that digestion of lipid-based formulations (LBFs) can stimulate both supersaturation and precipitation. The current study has evaluated the drug, formulation and dose-dependence of the supersaturation - precipitation balance for a range of LBFs. METHODS: Type I, II, IIIA/B LBFs containing medium-chain (MC) or long-chain (LC) lipids, and lipid-free Type IV LBF incorporating different doses of fenofibrate or tolfenamic acid were digested in vitro in a simulated intestinal medium. The degree of supersaturation was assessed through comparison of drug concentrations in aqueous digestion phases (APDIGEST) during LBF digestion and the equilibrium drug solubility in the same phases. RESULTS: Increasing fenofibrate or tolfenamic acid drug loads (i.e., dose) had negligible effects on LC LBF performance during digestion, but promoted drug crystallization (confirmed by XRPD) from MC and Type IV LBF. Drug crystallization was only evident in instances when the calculated maximum supersaturation ratio (SR(M)) was >3. This threshold SR(M) value was remarkably consistent across all LBF and was also consistent with previous studies with danazol. CONCLUSIONS: The maximum supersaturation ratio (SR(M)) provides an indication of the supersaturation 'pressure' exerted by formulation digestion and is strongly predictive of the likelihood of drug precipitation in vitro. This may also prove effective in discriminating the in vivo performance of LBFs.

Lipid digestion as a trigger for supersaturation: evaluation of the impact of supersaturation stabilization on the in vitro and in vivo performance of self-emulsifying drug delivery systems.

The generation of supersaturation in the gastrointestinal (GI) tract is an increasingly popular means of promoting oral absorption for poorly water-soluble drugs. The current study examined the impact of changes to the quantities of medium-chain (MC) lipid (Captex 300:Capmul MCM), surfactant (Cremophor EL) and cosolvent (EtOH), and the addition of polymeric precipitation inhibitors (PPI), on supersaturation during the dispersion and digestion of MC self-emulsifying drug delivery systems (SEDDS) containing danazol. The data suggest that digestion acts as a "trigger" for enhanced supersaturation and that solubilization/precipitation behavior is correlated with the degree of supersaturation on dispersion (S(M)DISP) or digestion (S(M)DIGEST). The ability of the formulation to maintain solubilization in vitro decreased as the S(M) of the formulation increased. PPI significantly increased supersaturation stabilization and precipitation was inhibited where S(M)DISP < 3.5 and S(M)DIGEST < 4. In the presence of polymer, some degree of supersaturation was maintained up to S(M)DIGEST ∼ 8. Differentiation in the ability of SEDDS to maintain drug solubilization stems from the ability to stabilize supersaturation and for MC SEDDS, utilization of lower drug loads, higher surfactant levels (balanced against increases in S(M)DISP), lower cosolvent and the addition of PPI enhanced formulation performance. In vivo studies confirmed the ability of PPI to promote drug exposure at moderate drug loads (40% of saturated solubility in the formulation). At higher drug loads (80% saturation) and in lipid-free SEDDS, this effect was lost, suggesting that the ability of PPIs to stabilize supersaturation in vitro may, under some circumstances, overestimate utility in vivo.

Toward the establishment of standardized in vitro tests for lipid-based formulations. 2. The effect of bile salt concentration and drug loading on the performance of type I, II, IIIA, IIIB, and IV formulations during in vitro digestion.

The LFCS Consortium was established to develop standardized in vitro tests for lipid-based formulations (LBFs) and to examine the utility of these tests to probe the fundamental mechanisms that underlie LBF performance. In this publication, the impact of bile salt (sodium taurodeoxycholate, NaTDC) concentration and drug loading on the ability of a range of representative LBFs to generate and sustain drug solubilization and supersaturation during in vitro digestion testing has been explored and a common driver of the potential for drug precipitation identified. Danazol was used as a model poorly water-soluble drug throughout. In general, increasing NaTDC concentrations increased the digestion of the most lipophilic LBFs and promoted lipid (and drug) trafficking from poorly dispersed oil phases to the aqueous colloidal phase (AP(DIGEST)). High NaTDC concentrations showed some capacity to reduce drug precipitation, although, at NaTDC concentrations ≥3 mM, NaTDC effects on either digestion or drug solubilization were modest. In contrast, increasing drug load had a marked impact on drug solubilization. For LBFs containing long-chain lipids, drug precipitation was limited even at drug loads approaching saturation in the formulation and concentrations of solubilized drug in AP(DIGEST) increased with increased drug load. For LBFs containing medium-chain lipids, however, significant precipitation was evident, especially at higher drug loads. Across all formulations a remarkably consistent trend emerged such that the likelihood of precipitation was almost entirely dependent on the maximum supersaturation ratio (SR(M)) attained on initiation of digestion. SR(M) defines the supersaturation "pressure" in the system and is calculated from the maximum attainable concentration in the AP(DIGEST) (assuming zero precipitation), divided by the solubility of the drug in the colloidal phases formed post digestion. For LBFs where phase separation of oil phases did not occur, a threshold value for SR(M) was evident, regardless of formulation composition and drug solubilization reduced markedly above SR(M) > 2.5. The threshold SR(M) may prove to be an effective tool in discriminating between LBFs based on performance.

Aqueous phase behavior of the PEO-containing non-ionic surfactant C12E6: A molecular dynamics simulation study.

HYPOTHESIS: Non-ionic surfactants containing polyethylene oxide (PEO) chains are widely used in drug formulations, cosmetics, paints, textiles and detergents. High quality molecular dynamics models for PEO surfactants can give us detailed, atomic-scale information about the behavior of surfactant/water mixtures. SIMULATIONS: We used two molecular dynamics force fields (FFs), 2016H66 and 53A6DBW, to model the simple non-ionic PEO surfactant, hexaoxyethylene dodecyl ether (C12E6). We investigated surfactant/water mixtures that span the phase diagram of starting from randomly distributed arrangements. In some cases, we also started with prebuilt, approximate models. The simulations results were compared with the experimentally observed phase behavior. FINDINGS: Overall, this study shows that the spontaneous self-assembly of PEO non-ionic surfactants into different colloidal structures can be accurately modeled with MD simulations using the 2016H66 FF although transitions to well-formed hexagonal phase are slow. Of the two FFs investigated, the 2016H66 FF better reproduces the experimental phase behavior across all regions of the C12E6/water phase diagram.

Stabilising disproportionation of lipophilic ionic liquid salts in lipid-based formulations.

Lipid based formulations (LBFs) can enhance oral bioavailability, however, their utility may be restricted by low drug loading in the formulation. Converting drugs to drug-ionic liquids (drug-ILs) or lipophilic salts can significantly increase lipid solubility but this approach is complicated in some cases by salt disproportionation, leading to a reduction in solubility and physical instability. Here we explore the physical stability of the weakly basic model drug, cinnarizine (CIN), when paired with a decanoate counterion (Dec) to form the drug-IL, cinnarizine decanoate (CIN.Dec). Consistent with published studies of salt disproportionation in aqueous solution, weakly acidic counterions such as Dec lead to the generation of drug-IL lipid solutions with pHs below pHmax. This leads to CIN deprotonation to the less soluble free base and precipitation. Subsequent studies however, show that these effects can be reversed by acidification of the formulation (either with excess decanoic acid or other lipid soluble acids), stimulating a pH shift to the salt plateau of CIN.Dec and the formation of stable lipid solutions of CIN.Dec. Altering formulation pH to more acidic conditions, therefore stabilises drug-ILs formed using weakly acidic lipophilic counterions, and is a viable method to promote formulation stability via inhibition of disproportionation of some drug-ILs.

API ionic liquids: probing the effect of counterion structure on physical form and lipid solubility.

Lipid based formulations (LBFs) are extensively utilised as an enabling technology in drug delivery. The use of ionic liquids (ILs) or lipophilic salts (LS) in drug delivery has also garnered considerable interest due to unique solubility properties. Conversion of active pharmaceutical ingredients (API) to ILs by pairing with an appropriately lipophilic counterion has been shown to decrease melting point of the salt complex and improve solubility in LBFs. However, the relationship between the structure of the counterion, the physicochemical properties of the resulting salts and solubility in LBFs has not been systematically explored. This study investigates the relationship between alkyl sulfate counterion structure and melting temperature (T m or T g) in addition to LBF solubility, utilizing cinnarizine and lumefantrine as model weakly basic APIs. Three series of structurally diverse alkyl sulfate counterions were chosen to probe this relationship. Pairing cinnarizine and lumefantrine with a majority of these alkyl sulfate counterions resulted in a reduction in melting temperature and enhanced solubility in model medium chain and long chain LBFs. The chain length of the alkyl sulfate plays a crucial role in performance, and consistently branched alkyl sulfate counterions perform better than straight chain alkyl sulfate counterions, as predicted. Most interestingly, trends in counterion performance were found to be consistent across two APIs with disparate chemical structures. The findings from this study will facilitate the design of counterions which enhance solubility of ionisable drugs and unlock the potential to develop compounds previously restrained by poor solubility.