Deprotometalation-Iodolysis and Direct Iodination of 1-Arylated 7-Azaindoles: Reactivity Studies and Molecule Properties.

Five protocols were first compared for the copper-catalyzed C-N bond formation between 7-azaindole and aryl/heteroaryl iodides/bromides. The 1-arylated 7-azaindoles thus obtained were subjected to deprotometalation-iodolysis sequences using lithium 2,2,6,6-tetramethylpiperidide as the base and the corresponding zinc diamide as an in situ trap. The reactivity of the substrate was discussed in light of the calculated atomic charges and the pKa values. The behavior of the 1-arylated 7-azaindoles in direct iodination was then studied, and the results explained by considering the HOMO orbital coefficients and the atomic charges. Finally, some of the iodides generated, generally original, were involved in the N-arylation of indole. While crystallographic data were collected for fifteen of the synthesized compounds, biological properties (antimicrobial, antifungal and antioxidant activity) were evaluated for others.

Functionalization of 9-thioxanthone at the 1-position: From arylamino derivatives to [1]benzo(thio)pyrano[4,3,2-de]benzothieno[2,3-b]quinolines of biological interest.

Original 1-amino substituted thioxanthone derivatives were easily prepared from the bare heterocycle by a deprotometalation-iodolysis-copper-catalyzed CN bond formation sequence. This last reaction delivered mono- or/and diarylated products depending on the aniline involved. 1-Amino-9-thioxanthone was also prepared and reacted with 2-iodoheterocycles. Interestingly, while 1-(arylamino)-9-thioxanthones could be isolated, their subsequent cyclization was found to deliver original hexacyclic derivatives of helicoidal nature. Evaluation of their photophysical properties revealed high fluorescence in polar media, indicating potential applications for biological imaging. These compounds being able to inhibit PIM1 kinase, their putative binding mode was examined through molecular modeling experiments. Altogether, these results tend to suggest the discovery of a new family of fluorescent PIM inhibitors and pave the way for their future rational optimization.

Deprotonative Metalation of Methoxy-Substituted Arenes Using Lithium 2,2,6,6-Tetramethylpiperidide: Experimental and Computational Study.

The reaction pathways of lithium 2,2,6,6-tetramethylpiperidide (LiTMP)-mediated deprotonative metalation of methoxy-substituted arenes were investigated. Importantly, it was experimentally observed that, whereas TMEDA has no effect on the course of the reactions, the presence of more than the stoichiometric amount of LiCl is deleterious, in particular without an in situ trap. These effects were corroborated by the DFT calculations. The reaction mechanisms, such as the structure of the active species in the deprotonation event, the reaction pathways by each postulated LiTMP complex, the stabilization effects by in situ trapping using zinc species, and some kinetic interpretation, are discussed herein.

Deprotometalation-iodolysis and computed CH acidity of 1,2,3- and 1,2,4-triazoles. Application to the synthesis of resveratrol analogues.

1-Aryl- and 2-aryl-1,2,3-triazoles were synthesized by N-arylation of the corresponding azoles using aryl iodides. The deprotometalations of 1-phenyl-1,2,3-triazole and -1,2,4-triazole were performed using a 2,2,6,6-tetramethylpiperidino-based mixed lithium-zinc combination and occurred at the most acidic site, affording by iodolysis the 5-substituted derivatives. Dideprotonation was noted from 1-(2-thienyl)-1,2,4-triazole by increasing the amount of base. From 2-phenyl-1,2,3-triazoles, and in particular from 2-(4-trifluoromethoxy)phenyl-1,2,3-triazole, reactions at the 4 position of the triazolyl, but also ortho to the triazolyl on the phenyl group, were observed. The results were analyzed with the help of the CH acidities of the substrates, determined in THF solution using the DFT B3LYP method. 4-Iodo-2-phenyl-1,2,3-triazole and 4-iodo-2-(2-iodophenyl)-1,2,3-triazole were next involved in Suzuki coupling reactions to furnish the corresponding 4-arylated and 4,2'-diarylated derivatives. When evaluated for biological activities, the latter (which are resveratrol analogues) showed moderate antibacterial activity and promising antiproliferative effect against MDA-MB-231 cell line.

Deproto-metallation of N-arylated pyrroles and indoles using a mixed lithium-zinc base and regioselectivity-computed CH acidity relationship.

The synthesis of N-arylated pyrroles and indoles is documented, as well as their functionalization by deprotonative metallation using the base in situ prepared from LiTMP and ZnCl2·TMEDA (1/3 equiv). With N-phenylpyrrole and -indole, the reactions were carried out in hexane containing TMEDA which regioselectively afforded the 2-iodo derivatives after subsequent iodolysis. With pyrroles and indoles bearing N-substituents such as 2-thienyl, 3-pyridyl, 4-methoxyphenyl and 4-bromophenyl, the reactions all took place on the substituent, at the position either adjacent to the heteroatom (S, N) or ortho to the heteroatom-containing substituent (OMe, Br). The CH acidities of the substrates were determined in THF solution using the DFT B3LYP method in order to rationalize the experimental results.

Synthesis of C,N'-linked bis-heterocycles using a deprotometalation-iodination-N-arylation sequence and evaluation of their antiproliferative activity in melanoma cells.

Benzothiophene, benzofuran, benzothiazole and benzoxazole were deprotometalated using the lithium-zinc combination prepared from ZnCl2·TMEDA (TMEDA=N,N,N',N'-tetramethylethylenediamine, 1equiv) and lithium 2,2,6,6-tetramethylpiperidide (LiTMP, 3equiv). Subsequent interception of the 2-metalated derivatives using iodine as electrophile led to the iodides in 81%, 82%, 67% and 42% yields, respectively. These yields are higher (10% more) than those obtained using ZnCl2·TMEDA (0.5equiv) and LiTMP (1.5equiv), except in the case of benzoxazole (10% less). The crude iodides were involved in the N-arylation of pyrrole, indole, carbazole, pyrazole, indazole, imidazole and benzimidazole in the presence of Cu (0.2equiv) and Cs2CO3 (2equiv), and using acetonitrile as solvent (no other ligand) to provide after 24h reflux the expected N-arylated azoles in yields ranging from 33% to 81%. Using benzotriazole also led to N-arylation products, but in lower 34%, 39%, 36% and 6% yields, respectively. A further study with this azole evidenced the impact of 2,2,6,6-tetramethylpiperidine on the N-arylation yields. Most of the C,N'-linked bis-heterocycles thus synthesized (in particular those containing benzimidazole) induced a high growth inhibition of A2058 melanoma cells after a 72h treatment at 10(-5)M.

Experimental and theoretical study of the [3 + 2] cycloaddition of carbonyl ylides with alkynes.

The [3 + 2] cycloaddition reaction between carbonyl ylides generated from epoxides and alkynes (phenylacetylene, methyl propiolate, methyl but-2-ynoate and methyl 3-phenylpropiolate) to give substituted 2,5-dihydrofurans was investigated. The effect of indium(III) chloride on the outcome of the reaction was studied in the case of phenylacetylene and methyl propiolate. The thermal reaction between the carbonyl ylide coming from 2,2-dicyano-3-phenyloxirane and both methyl propiolate and methyl but-2-ynoate was theoretically investigated using DFT methods in order to explain the reactivity and regioselectivity observed.

A combined experimental and theoretical study of the thermal cycloaddition of aryl azides with activated alkenes.

Reactions were performed from aryl azides on the one hand, and activated alkenes coming from ß-dicarbonyl compounds or malonodinitrile on the other hand, either with recourse to conventional heating or to microwave activation, to afford 1-aryl-1H-1,2,3-triazoles. The mechanism and the regioselectivity of the reactions involving ß-dicarbonyl compounds have been theoretically studied using DFT methods at the B3LYP/6-31G* level: they are domino processes comprising a tautomeric equilibrium of the ß-dicarbonyl compounds with their enol forms, a 1,3-dipolar cycloaddition of the enol forms with the aryl azides (high activation energy), and a dehydration process (lower activation energy). The effect of non-conventional activation methods on the degradation of 1,2,3-triazolines was next studied experimentally. Finally, some of the 1,2,3-triazoles such synthesized were evaluated for their bactericidal and cytotoxic activities.

Direct metalation of heteroaromatic esters and nitriles using a mixed lithium-cadmium base. Subsequent conversion to dipyridopyrimidinones.

All pyridine nitriles and esters were metalated at the position next to the directing group using (TMP)(3)CdLi in tetrahydrofuran at room temperature. The 2-, 3-, and 4-cyanopyridines were treated with 0.5 equiv of base for 2 h to afford, after subsequent trapping with iodine, the corresponding 3-iodo, 2-iodo, and 3-iodo derivatives, respectively, in yields ranging from 30 to 61%. Cyanopyrazine was similarly functionalized at the 3 position in 43% yield. Ethyl 3-iodopicolinate and -isonicotinate were synthesized from the corresponding pyridine esters in 58 and 65% yield. Less stable ethyl 4-iodonicotinate also formed under the same conditions and was directly converted to ethyl 4-(pyrazol-1-yl)nicotinate in a two-step 38% yield. All three ethyl iodopyridinecarboxylates were involved in a one-pot palladium-catalyzed cross-coupling reaction/cyclization using 2-aminopyridine to afford new dipyrido[1,2-a:3',2'-d]pyrimidin-11-one, dipyrido[1,2-a:4',3'-d]pyrimidin-11-one, and dipyrido[1,2-a:3',4'-d]pyrimidin-5-one in yields ranging from 50 to 62%. A similar cross-coupling/cyclization sequence was applied to methyl 2-chloronicotinate using 2-aminopyridine, 2-amino-5-methylpyridine, and 1-aminoisoquinoline to give the corresponding tricyclic or tetracyclic compounds in 43-79% yield. Dipyrido[1,2-a:4',3'-d]pyrimidin-11-one and dipyrido[1,2-a:3',4'-d]pyrimidin-5-one showed a good bactericidal activity against Pseudomonas aeroginosa . Dipyrido[1,2-a:2',3'-d]pyrimidin-5-one and pyrido[2',3':4,5]pyrimidino[2,1-a]isoquinolin-8-one showed a fungicidal activity against Fusarium and dipyrido[1,2-a:4',3'-d]pyrimidin-11-one against Candida albicans . Ethyl 4-(pyrazol-1-yl)nicotinate and dipyrido[1,2-a:2',3'-d]pyrimidin-5-one have promising cytotoxic activities, the former toward a liver carcinoma cell line (HEPG2) and the latter toward a human breast carcinoma cell line (MCF7).

Deprotonative metalation of functionalized aromatics using mixed lithium-cadmium, lithium-indium, and lithium-zinc species.

In situ mixtures of CdCl(2)TMEDA (0.5 equiv; TMEDA = N,N,N',N'-tetramethylethylenediamine) or InCl(3) (0.33 equiv) with [Li(tmp)] (tmp = 2,2,6,6-tetramethylpiperidino; 1.5 or 1.3 equiv, respectively) were compared with the previously described mixture of ZnCl(2)TMEDA (0.5 equiv) and [Li(tmp)] (1.5 equiv) for their ability to deprotonate anisole, benzothiazole, and pyrimidine. [(tmp)(3)CdLi] proved to be the best base when used in tetrahydrofuran at room temperature, as demonstrated by subsequent trapping with iodine. The Cd-Li base then proved suitable for the metalation of a large range of aromatics including benzenes bearing reactive functional groups (CONEt(2), CO(2)Me, CN, COPh) or heavy halogens (Br, I), and heterocycles (from the furan, thiophene, pyrrole, oxazole, thiazole, pyridine, and diazine series). Five-membered heterocycles benefiting from doubly activated positions were similarly dideprotonated at room temperature. The aromatic lithium cadmates thus obtained were involved in palladium-catalyzed cross-coupling reactions or simply quenched with acid chlorides.

Deprotonative magnesation and cadmation of [1,2,3]triazolo[1,5-a]pyridines.

[1,2,3]Triazolo[1,5-a]pyridine and 3-substituted derivatives were regioselectively metalated at the 7 position using either Bu3MgLi or (TMP)3CdLi, the former at -10 degrees C and the latter at room temperature. The lithium arylmagnesates (R = H, Me, Ph) proved to react with iodine (34-75%) or 3,4,5-trimethoxybenzaldehyde (32-51%). Attempts to obtain the cross-coupling products using 2-bromopyridine under palladium catalysis failed, a result attributed to the low stability of these compounds. The corresponding lithium arylzincates reacted in 17-60% yield under the same reaction conditions. The lithium arylcadmates were either trapped with iodine (38-76%, R = H, Me, Ph, CN, 2-thienyl) or involved in palladium-catalyzed cross-coupling reactions with 2-bromopyridine (26-67%, R = H, Me, Ph). For R = 2-pyridyl, 3-(6-iodo-2-pyridyl)-[1,2,3]triazolo[1,5-a]pyridine was isolated in 73% yield. (TMP)3CdLi also proved suitable for the clean dideprotonation of two substrates (R = H, 2-thienyl), a result demonstrated by quenching with iodine (66-75%).

A combined experimental and theoretical study of the polar [3 + 2] cycloaddition of electrophilically activated carbonyl ylides with aldehydes and imines.

Numerous 2,5-diaryl-1,3-dioxolane-4,4-dicarbonitriles and 2,4-diphenyl-1,3-oxazolidine-5,5-dicarbonitriles have been synthesized by [3 + 2] cycloaddition reactions between carbonyl ylides generated from epoxides and aldehydes or imines. In contrast to the use of aldehydes (3,4,5-trimethoxybenzaldehyde, piperonal, 1-naphthaldehyde, indole-3-carboxaldehyde, furan-2-carboxaldehyde, and thiophene-2-carboxaldehyde), the reactions performed with imines (N-(phenylmethylene)methanamine, N-(1,3-benzodioxol-5-ylmethylene)propylamine, N-(1,3-benzodioxol-5-ylmethylene)butylamine, and N-(1,3-benzodioxol-5-ylmethylene)benzylamine) proceed diastereoselectively. The effect of microwave irradiation on the outcome of the reaction was studied. The mechanism of these [3 + 2] cycloaddition reactions has been theoretically investigated using DFT methods. These cycloadditions, which have one-step mechanisms, consist of the nucleophilic attack of the aldehyde oxygen or imine nitrogen on the carbonyl ylide. For the reaction with aldehydes, a back-donation effect is responsible for the unexpected reverse charge transfer found at the transition structure. The analysis of the reactivity indexes indicates that the large electrophilic character of the carbonyl ylides induces them to act as strong electrophiles in these polar [3 + 2] cycloaddition reactions.

Direct metallation of thienopyrimidines using a mixed lithium-cadmium base and antitumor activity of functionalized derivatives.

A series of thieno[2,3-d]- and thieno[3,2-d]pyrimidines have been easily synthesized using as key step a deproto-cadmiation-trapping sequence. Some of the compounds thus synthesized were screened for anticancer (cytotoxic) activities, and (S)-2-(6-iodo-2-phenylthieno[2,3-d]pyrimidin-4-ylamino)-3-phenylpropanoic acid proved to have a significant activity towards liver, human breast and cervix carcinoma cell lines.

Deprotonative cadmation of functionalized aromatics.

This communication describes the deproto-metalation of a large range of aromatics including heterocycles using a newly developed lithium-cadmium base; the reaction proceeds at room temperature with an excellent chemoselectivity and efficiency, and proved to be regioselective in most cases.

Polar [3 + 2] cycloaddition of ketones with electrophilically activated carbonyl ylides. Synthesis of spirocyclic dioxolane indolinones.

The [3 + 2] cycloaddition reaction between carbonyl ylides generated from epoxides and ketones (ethyl pyruvate, ethyl phenylglyoxylate, isatin, N-methylisatin and 5-chloroisatin) to give substituted dioxolanes and spirocyclic dioxolane indolinones was investigated. The effect of microwave irradiation on the outcome of the reaction was studied. The thermal reaction between 2,2-dicyano-3-phenyloxirane and N-methylisatin was theoretically studied using DFT methods. This reaction is a domino process that comprises two steps. The first is the thermal ring opening of the epoxide to yield a carbonyl ylide intermediate, whereas the second step is a polar [3 + 2] cycloaddition to yield the final spiro cycloadducts. The cycloaddition presents a low stereoselectivity and a large regio- and chemoselectivity. Analysis of the electrophilicity values and the Fukui functions of the reagents involved in the cycloaddition step allowed the chemical outcome to be explained.

Extending motifs in lithiocuprate chemistry: unexpected structural diversity in thiocyanate complexes.

The new area of lithio(thiocyanato)cuprates has been developed. Using inexpensive, stable and safe CuSCN for their preparation, these complexes revealed Lipshutz-type dimeric motifs with solvent-dependent point group identities; planar, boat-shaped and chair shaped conformers are seen in the solid state. In solution, both Lipshutz-type and Gilman structures are clearly seen. Since the advent in 2007 of directed ortho cupration, effort has gone into understanding the structure-reactivity effects of amide ligand variation in and alkali metal salt abstraction from Lipshutz-type cuprates such as (TMP)2Cu(CN)Li2(THF) 1 (TMP = 2,2,6,6-tetramethylpiperidide). The replacement of CN(-) with SCN(-) is investigated presently as a means of improving the safety of lithium cuprates. The synthesis and solid state structural characterization of reference cuprate (TMP)2Cu(CN)Li2(THP) 8 (THP = tetrahydropyran) precedes that of the thiocyanate series (TMP)2Cu(SCN)Li2(L) (L = OEt29, THF 10, THP 11). For each of 9-11, preformed TMPLi was combined with CuSCN (2 : 1) in the presence of sub-stoichiometric Lewis base (0.5 eq. wrt Li). The avoidance of Lewis basic solvents incurs formation of the unsolvated Gilman cuprate (TMP)2CuLi 12, whilst multidimensional NMR spectroscopy has evidenced the abstraction of LiSCN from 9-11 in hydrocarbon solution and the in situ formation of Gilman reagents. The synthetic utility of 10 is established in the selective deprotometalation of chloropyridine substrates, including effecting transition metal-free homocoupling in 51-69% yield.