Enhancing parental understanding of congenital heart disease through personalized prenatal counseling with 3D printed hearts.

OBJECTIVES: In addition to a correct prenatal diagnosis of congenital heart disease (CHD), comprehensive parental counseling is crucial to ensure that parents are well-informed about the condition of the fetus. This study aims to investigate whether there is a significant difference in the information acquired by parents through traditional counseling, utilizing 2-dimensional (2D) illustrations and images, compared to an advanced approach utilizing personalized three-dimensional (3D) printed models of the fetal heart developed from 3D ultrasound imaging. METHODS: This study, designed as a pilot randomized control trial, enrolled pregnant women with gestational ages greater than 18 weeks, whose fetuses were diagnosed with CHD and referred to our center between November, 2020 and June, 2021. Two groups of patients were included in the study. The first group received standard medical counseling with 2D images and illustrations, while the second group underwent advanced counseling with 3D-printed patient-specific heart models. Both groups were then required to complete the same survey in which the knowledge of the CHD was investigated. The 3D models were created from 3D ultrasound imaging and printed using resin materials in both 1:1 and 5:1 scale. RESULTS: A comparison of the scores obtained from the two groups revealed that 3D visualization of the fetus's heart has the potential to increase parental knowledge about CHD and the required surgical procedures. Furthermore, all couples expressed interest in receiving a 1:1 scale model of their baby's heart. CONCLUSION: Personalized prenatal counseling with 3D-ultrasound-based heart models positively impacts parents' understanding of CHD. The use of 3D models provides a more comprehensive and accessible representation of the condition, contributing to an increased knowledge gain, and potentially helping to support informed decisions regarding their child's care.

Intracorporeal LVAD implantation in pediatric patients: A single-center 10 years' experience.

BACKGROUND: Mechanical cardiac support is currently an effective strategy to reduce morbidity and mortality in pediatric patients. However, solid evidence regarding the feasibility of intracorporeal devices in children still needs to be provided. We report our 10-year experience with intracorporeal left ventricular assist devices (LVAD) in children. MATERIALS AND METHODS: We included all patients undergoing intracorporeal, continuous-flow LVAD implantation between 2012 and 2022. Baseline and postoperative data were collected from the institutional database. RESULTS: Seven HeartWare and 4 HeartMate3 were implanted in 11 patients (median age 13.9 years, median body surface area - BSA - 1.42 m2, IQR 1.06-1.68). The most frequent indication to LVAD implant was dilated cardiomyopathy (72.7%). All candidates underwent a thorough preoperative advanced imaging. Three-dimensional reconstructions and implant fit simulation were performed when BSA was <1.2 m2, weight <30 kg, or internal transverse thoracic diameter <20 cm. There was no operative death. The most common postoperative complication was surgical re-exploration due to bleeding (27.3%). One patient died of severe neurological complications after about 3 months of hospitalization. No late deaths or unplanned re-hospitalizations occurred in the remaining 10, 6 of whom were discharged home. There were no major complications at the follow-up. All survivors underwent successful heart transplantation. CONCLUSIONS: Intracorporeal LVAD implantation proved to be a potentially feasible and safe option in young teenagers and children whose BSA was >1.0 m2. In borderline cases, the 3D reconstruction with implant fit simulation can effectively help to identify those patients who can safely undergo intrathoracic LVAD implantation.

3D Reconstruction for a Complex Pediatric Redo Aortic Arch Surgery in a 9-Year-Old Ukrainian Refugee.

Redo aortic surgery poses significant challenges, particularly in complex scenarios involving congenital heart conditions that have been previously operated on several years prior. The integration of three-dimensional (3D) reconstruction and printing holds immense potential to greatly improve surgical precision, particularly in critical situations.

Rescue ross procedure and mitral valve repair on a low birth weight preterm neonate.

Although mid- and long-term outcomes after the Ross procedure for aortic valve disease have been increasingly improving over the years, this is still a rather challenging operation in neonates and small children. This is particularly true for patients with associated congenital heart defects and critical clinical conditions. Herein we describe the application of this procedure as a rescue operation in emergency circumstances in a low-birth-weight neonate with severe aortic stenosis, aortic regurgitation and mitral regurgitation after a previous aortic coartectomy.

Fast-track virtual reality for cardiac imaging in congenital heart disease.

BACKGROUND AND AIM OF THE STUDY: We sought to evaluate the appropriateness of cardiac anatomy renderings by a new virtual reality (VR) technology, entitled DIVA, directly applicable to raw magnetic resonance imaging (MRI) data without intermediate segmentation steps in comparison to standard three-dimensional (3D) rendering techniques (3D PDF and 3D printing). Differences in post-processing times were also evaluated. METHODS: We reconstructed 3D (STL, 3D-PDF, and 3D printed ones) and VR models of three patients with different types of complex congenital heart disease (CHD). We then asked a senior pediatric heart surgeon to compare and grade the results obtained. RESULTS: All anatomical structures were well visualized in both VR and 3D PDF/printed models. Ventricular-arterial connections and their relationship with the great vessels were better visualized with the VR model (Case 2); aortic arch anatomy and details were also better visualized by the VR model (Case 3). The median post-processing time to get VR models using DIVA was 5 min in comparison to 8 h (range 8-12 h including printing time) for 3D models (PDF/printed). CONCLUSIONS: VR directly applied to non-segmented 3D-MRI data set is a promising technique for 3D advanced modeling in CHD. It is systematically more consistent and faster when compared to standard 3D-modeling techniques.

Late management of the aortic root after repair of tetralogy of Fallot: A European multicentre study.

OBJECTIVES: We sought to determine the indications, type, and outcomes of reoperations on the aortic root after repair of tetralogy of Fallot (TOF). METHODS: Eleven centers belonging to the European Congenital Heart Surgeons Association contributed to the data collection process. We included 36 patients who underwent surgical procedures on the aortic root, including surgery on the aortic valve and ascending aorta, between January 1975 and December 2017. Original diagnoses included TOF-pulmonary stenosis (n = 18) and TOF-pulmonary atresia (n = 18). The main indications for reoperation were aortic insufficiency (n = 19, 53%), aortic insufficiency and dilatation of the ascending aorta (n = 10, 28%), aortic root dilatation (n = 4, 11%), and ascending aorta dilatation (n = 3, 8%). RESULTS: The median age at reoperation was 30.4 years (interquartile range 20.3-45.3 years), and mechanical aortic valve replacement was the most common procedure performed. Five patients died early after reoperation (14%), and larger ascending aorta diameters were associated with early mortality (P = .04). The median age at the last follow-up was 41.4 years (interquartile range 24.5-51.6 years). Late death occurred in five patients (5/31, 16%). Most survivors (15/26, 58%) were asymptomatic at the last clinical examination (New York Heart Association, NYHA class I). The remaining patients were NYHA class II (n = 7) and III (n = 3). The most common symptoms were fatigue (n = 5), dyspnea (n = 4), and exercise intolerance (n = 3). CONCLUSIONS: Reoperations on the aortic root are infrequent but may become necessary late after TOF repair. The main indications for reoperation are aortic insufficiency, either isolated or associated with a dilatation of the ascending aorta. The surgical risk at reoperation was high and the presence of ascending aorta dilation is related to higher mortality.

The introduction of surgical simulation on three-dimensional-printed models in the cardiac surgery curriculum: an experimental project.

AIMS: Training in congenital cardiac surgery has become more and more difficult because of the reduced opportunities for trainees in the operating room and the high patient anatomical variability. The aim of this study was to perform a pilot evaluation of surgical simulation on a simple 3D-printed heart model in training of young surgeons and its potential inclusion in the curriculum of residency programs. METHODS: A group of 11 residents performed a surgical correction of aortic coarctation using a 3D-printed surgical model. After teaching the surgical procedure, a simulation was performed twice, at different times, and was evaluated quantitatively and qualitatively by a senior surgeon. A 3D model-based training program was then developed and incorporated into our cardiac surgery training program. RESULTS: A significant improvement in surgical technique was observed between the first and second surgical simulations: median of 65% [interquartile range (IQR) = 61-70%] vs. 83% (IQR = 82-91%, P < 0.001). The median time required to run the simulation was significantly shorter during the second simulation: 39 min (IQR = 33-40) vs. 45 min (IQR = 37-48; P = 0.02). Regarding the simulation program, a basic and an advanced program were developed, including a total of 40 different simulated procedures divided into 12 sessions. CONCLUSION: Surgical simulation using 3D-printing technology can be an extremely valuable tool to improve surgical training in congenital heart disease. Our pilot study can represent the first step towards the creation of an integrated training system on 3D-printed models of congenital and acquired heart diseases in other Italian residency programs.

Successful Implantation of HeartMate3 in a Small Child After Multimodality Imaging Pathway to Assess Feasibility.

The current use of intracorporeal left ventricular assist devices in children is still limited by small body dimensions. Many children weighing of less than 30 kg requiring durable mechanical circulatory support are implanted with the Berlin Heart EXCOR, a paracorporeal device. We present the case of a girl aged 10 years with a body surface area of 1.01 m 2 undergoing a safe and effective HeartMate3 implantation despite extremely small thoracic dimensions. Using computed tomography-derived three-dimensional (3D) reconstruction, it was possible to simulate several device positions finding the best HeartMate3 lodging. Simulation-guided pump placement was then obtained in the operating room. Normal HeartMate3 functioning was registered until heart transplant. Our experience shows that preoperative planning and virtual fitting simulation can be effective to assess safety of HeartMate3 implantation even in small children. The 3D reconstruction and simulation may help to increase the pool of children candidates for this device, even though a larger experience is needed to assess the risk profile of the HeartMate3 in such small patients.

Three-Dimensional-Enabled Surgical Planning for the Correction of Right Partial Anomalous Pulmonary Venous Return.

Objectives: The surgical technique for right partial anomalous pulmonary venous return (PAPVR) depends on the location of the anomalous pulmonary veins (PVs). With this in mind, we sought to evaluate the impact of 3D heart segmentation and reconstruction on preoperative surgical planning. Methods: A retrospective study was conducted on all patients who underwent PAPVR repair at our institution between January 2018 and October 2021; three-dimensional segmentations and reconstructions of all the heart anatomies were performed. A score (the PAPVR score) was established and calculated using two anatomical parameters (the distance between the most cranial anomalous PV and the superior rim of the sinus venosus defect/the sum of the latter and the distance between the PV and the azygos vein) to predict the type of correction. Results: A total of 30 patients were included in the study. The PAPVR score was found to be a good predictor of the type of surgery performed. A value > 0.68 was significantly associated with a Warden procedure (p < 0.001) versus single/double patch repair. Conclusions: Three-dimensional heart segmentations and reconstructions improve the quality of surgical planning in the case of PAPVR and allow for the introduction of a score that may facilitate surgical decisions on the type of repair required.

Fast-track virtual reality software to facilitate 3-dimensional reconstruction in congenital heart disease.

OBJECTIVES: Two limitations of the clinical use of 3-dimensional (3D) reconstruction and virtual reality systems are the relatively high cost and the amount of experience required to use hardware and software to effectively explore medical images. We have tried to simplify the process and validate a new tool developed for this purpose with a novel software package. METHODS: Five patients with right partial anomalous pulmonary venous return with adequate preoperative images acquired with magnetic resonance imaging were enrolled. Five volunteers with no previous experience in the field of 3D reconstruction were instructed to use the software after viewing a short video tutorial. Users were then asked to create a 3D model of each patient's heart using DIVA software. Their results were compared quantitatively and qualitatively with a benchmark reconstruction performed by an experienced user. RESULTS: All our participants recreated 3D models in a relatively short time, maintaining a good overall quality (average quality score ≥ 3 on a scale of 1-5). The overall trend of all the parameters analysed showed a statistical improvement between case 1 and case 5, as users became more and more experienced. CONCLUSIONS: DIVA is a simple software program that allows accurate 3D reconstruction in a relatively short time ("fast-track" virtual reality). In this study, we demonstrated the potential use of DIVA by inexperienced users, with a significant improvement in quality and time after a few cases were performed. Further studies are needed to confirm the potential application of this technology on a larger scale.

Three-dimensional Printing for Hybrid Closure of Complex Muscular Ventricular Septal Defects.

The identification and surgical closure of apical complex muscular ventricular septal defects remains a difficult problem because of their location in the ventricular septum distal to the moderating band. Three-dimensional reconstruction can help the surgeon to better understand the location and structure of congenital cardiac defects. We report the case of a child with multiple apical complex muscular ventricular septal defects closed through a hybrid approach with the aid of a 3-dimensional printed model.

Three-Dimensional Printing of Fetal Heart With d-Transposition of the Great Arteries From Ultrasound Imaging Data.

We reconstructed and printed a 3D model of the fetal heart affected by d-transposition of the great arteries from prenatal ultrasound images. Our 3D model revealed to be very helpful in showing the basic anatomical features of fetal complex Congenital Heart Disease (CHD) and represents an interesting additional diagnostic tool to the current standard imaging armamentarium, improving the quality of prenatal parental counseling.

Surgery for Adult Patients with Congenital Heart Disease: Results from the European Database.

Adults with congenital heart disease (ACHD) represent a growing population. To evaluate frequency, type and outcomes of cardiac surgery in ACHD, we gathered data from the European Congenital Heart Surgeons Association Database of 20,602 adult patients (≥18 years) with a diagnosis of congenital heart disease who underwent cardiac surgery, between January 1997 and December 2017. We demonstrated that overall surgical workload (as absolute frequencies of surgical procedures per year) for this specific subset of patients increased steadily during the study period. The most common procedural groups included septal defects repair (n = 5740, 28%), right-heart lesions repair (n = 5542, 27%) and left-heart lesions repair (n = 4566, 22%); almost one-third of the procedures were re-operations (n = 5509, 27%). When considering the year-by-year relative frequencies of the main procedural groups, we observed a variation of the surgical scenario during the last two decades, characterized by a significant increase over time for right and left-heart lesions repair (p < 0.0001, both); while a significant decrease was seen for septal defects repair (p < 0.0001) and transplant (p = 0.03). Overall hospital mortality was 3% (n = 622/20,602 patients) and was stable over time. An inverse relationship between mortality and the number of patients operated in each center (p < 0.0001) was observed.