RESUMEN
The use of a metallic adhesion layer between plasmonic-active nanostructures and a solid supported is known to dampen the plasmonic response. To overcome this problem, organic adhesion layers have been introduced, which in turn can undermine the stability of the film. Moreover, both types of layers limit the regeneration of the nanostructures for multiple uses. Here we report a quick and simple approach to prepare intermediate adhesion layer-free binding of nanostructured films of gold on silicon wafers. The approach involves scratching and etching of the silicon wafer before sputter coating with a thin layer of Au. The plasmonic-active nanostructures were then prepared on this thin Au film using electrochemical deposition. As-prepared plasmonic-active nanostructured thin films of gold (PANTF-Au) are easy to handle, physically robust, and can be regenerated. The bulk refractive index sensitivity of PANTF-Au is 150 nm/RIU with the figure of merit 1.4, and with a plasmonic field-decay length of 27 nm. We further used these thin films to study interactions between lectin and glycoprotein inside a flow cell as well as on a microplate made of PANTF-Au. The PANTF-Au can be easily integrated with electrochemical devices and microfluidics, which can help to pave the way toward the development of ideal optical-electrochemical point-of-care biosensors.
RESUMEN
This article reports a novel thiolated ß-cyclodextrin (HS-ß-CD) modified nanoporous gold (NPG) wire for pH sensitive delivery of doxorubicin (DOX) in controlled manner. Nanoporous gold is a versatile material because of its three-dimensional nanoscale network of pores, facile surface functionalization, biocompatibility, and high capacity for the DOX payload. HS-ß-CD can form supramolecular inclusion complexes with DOX affording the possibility of altering the controlled release behavior. DOX is one of the most potent anti-tumor drugs used in the treatment of different cancers. The binding of HS-ß-CD and DOX was examined using UV-Vis spectroscopy. The prepared NPG structure exhibited excellent properties for controlled drug release outlining the potential of a pH sensitive drug implant for biomedical applications. This delivery system could improve local targeting of the drug as well as alter the rate of release of DOX near tumors.
RESUMEN
An electrochemical method for annealing the pore sizes of nanoporous gold (NPG) is reported. The pore sizes of NPG can be increased by electrochemical cycling with the upper potential limit being just at the onset of gold oxide formation. This study has been performed in electrolyte solutions including potassium chloride, sodium nitrate and sodium perchlorate. Scanning electron microscopy images have been used for ligament and pore size analysis. We examine the modifications of NPG due to annealing using electrochemical impedance spectroscopy, and cyclic voltammetry and offer a comparison of the surface coverage using the gold oxide stripping method as well as the method in which electrochemically accessible surface area is determined by using a diffusing redox probe. The effect of additives adsorbed on the NPG surface when subjected to annealing in different electrolytes as well as the subsequent structural changes in NPG are also reported. The effect of the annealing process on the application of NPG as a substrate for glucose electro-oxidation is briefly examined.
Asunto(s)
Espectroscopía Dieléctrica/métodos , Oro/química , Nanopartículas del Metal/química , Técnicas Biosensibles , Glucosa/análisis , Microscopía Electrónica de Rastreo , PorosidadRESUMEN
The potential to generate variable pore sizes, simplistic surface modification, and a breadth of commercial uses in the fields of biosensors, actuators, drug loading and release, and the development of catalysts have unquestionably accelerated the usage of nanoporous gold (NPG)-based nanomaterials in research and development. This article describes the process of the generation of hierarchical bimodal nanoporous gold (hb-NPG) by employing a step-wise procedure involving electrochemical alloying, chemical dealloying techniques, and annealing to create both macro- and mesopores. This is done to improve the utility of NPG by creating a bicontinuous solid/void morphology. The area available for surface modification is enhanced by smaller pores, while molecular transport benefits from the network of larger pores. The bimodal architecture, which is the result of a series of fabrication steps, is visualized using scanning electron microscopy (SEM) as a network of pores that are less than 100 nm in size and connected by ligaments to larger pores that are several hundred nanometers in size. The electrochemically active surface area of the hb-NPG is assessed using cyclic voltammetry (CV), with a focus on the critical roles that both dealloying and annealing play in creating the necessary structure. The adsorption of different proteins is measured by solution depletion technique, revealing the better performance of hb-NPG in terms of protein loading. By changing the surface area to volume ratio, the created hb-NPG electrode offers tremendous potential for biosensor development. The manuscript discusses a scalable method to create hb-NPG surface structures, as they offer a large surface area for the immobilization of small molecules and improved transport pathways for faster reactions.
Asunto(s)
Técnicas Biosensibles , Nanoporos , Oro/química , Enzimas Inmovilizadas/química , Técnicas Biosensibles/métodos , ElectrodosRESUMEN
Nanoporous gold (np-Au) has promising applications in therapeutic delivery. The promises arise from its high surface area-to-volume ratio, ease of tuning shape and size, ability to be modified by organic molecules including drugs, and biocompatibility. Furthermore, np-Au nanostructures can generate the photothermal effect. This effect can be used either for controlled release of drugs of therapeutic importance or for destroying cancer cells by heating locally. Despite the enormous potential, the research on the therapeutical use of the np-Au is still in its early stage. In this review, we discuss the current progress and future directions of np-Au for therapeutic applications.
RESUMEN
Nanoporous gold (NPG) is one of the most extensively investigated nanomaterials owing to its tunable pore size, ease of surface modification, and range of applications from catalysis, actuation, and molecular release to the development of electrochemical sensors. In an effort to improve the usefulness of NPG, a simple and robust method for the fabrication of hierarchical and bimodal nanoporous gold electrodes (hb-NPG) containing both macro-and mesopores is reported using electrochemical alloying and dealloying processes to engineer a bicontinuous solid/void morphology. Scanning electron microscopy (color SEM) images depict the hierarchical pore structure created after the multistep synthesis with an ensemble of tiny pores below 100 nm in size located in ligaments spanning larger pores of several hundred nanometers. Smaller-sized pores are exploited for surface modification, and the network of larger pores aids in molecular transport. Cyclic voltammetry (CV) was used to compare the electrochemically active surface area of the hierarchical bimodal structure with that of the regular unimodal NPG with an emphasis on the critical role of both dealloying and annealing in creating the desired structure. The adsorption of different proteins was followed using UV-vis absorbance measurements of solution depletion revealing the high loading capacity of hb-NPG. The surface coverage of lipoic acid on the hb-NPG was analyzed using thermogravimetric analysis (TGA) and reductive desorption. The roughness factor determinations suggest that the fabricated hb-NPG electrode has tremendous potential for biosensor development by changing the scaling relations between volume and surface area which may lead to improved analytical performance. We have chosen to take advantage of the surface architectures of hb-NPG due to the presence of a large specific surface area for functionalization and rapid transport pathways for faster response. It is shown that the hb-NPG electrode has a higher sensitivity for the amperometric detection of glucose than does an NPG electrode of the same geometric surface area.
RESUMEN
Nanoparticles (NPs) have been widely explored for delivering doxorubicin (DOX), an anticancer drug, to minimize cardiotoxicity. However, their efficiency is marred by a necessity to chemically modify DOX, NPs, or both and low deposition of the administered NPs on tumors. Therefore, alternative strategies should be developed to improve therapeutic efficacy and decrease toxicity. Here we report the possibility of employing a monolithic nanoporous gold (np-Au) rod as an implant for delivering DOX. The np-Au has very high DOX encapsulation efficiency (>98%) with maximum loading of 93.4 mg cm-3 without any chemical modification required of DOX or np-Au. We provide a plausible mechanism for the high loading of DOX in np-Au. The DOX sustained release for 26 days from np-Au in different pH conditions at 37 °C, which was monitored using UV-Vis spectroscopy. Additionally, we encased the DOX-loaded np-Au with rapamycin (RAPA)-trapped poly(D,L-lactide-co-glycolide) (PLGA) to fabricate an np-Au@PLGA/RAPA implant and optimized the combinatorial release of DOX and RAPA. Further exploiting the effect of the protein corona around np-Au and np-Au@PLGA/RAPA showed zero-order release kinetics of DOX. This work proves that the np-Au-based implant has the potential to be used as a DOX carrier of potential use in cancer treatment.
RESUMEN
Glycans have many important roles in human health and disease in processes such as infection, fertilization, cellular development, cellular adhesion, cancer metastasis and immune system response. The presentation of glycan structures on surfaces for screening of their interaction with protein binding partners, interactions with individual cells, and development of bioassays is an actively developing field. Self-assembled monolayers (SAMs) of glycan terminated alkanethiols on gold have found application in many of these areas. Additionally, more complex structures such as glycan modified polymers on gold surfaces have provided new routes for multivalent glycan presentation. Glycans have also been conjugated to monolayers formed on other useful substrates such as glass or silicon wafers. SAMs have been formed both by direct immobilization of glycan terminated alkanethiols and by conjugation of glycans to pre-formed SAMs with reactive terminal groups. The structure of the SAMs has been characterized using a range of methods including surface spectroscopy, scanning probe microscopy, and electrochemical methods. The binding of proteins to these SAMs has been followed using methods including surface plasmon resonance and electrochemical techniques such as impedance spectroscopy. In this chapter, we will seek to review the recent literature concerning SAMs containing terminal glycans, with a focus on their biomolecular interactions. The applications of these glycan-modified SAMs to the screening and study of protein and cellular binding and to biosensor and assay development will be reviewed.
RESUMEN
Nanoporous gold (np-Au), because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning pore and ligament sizes. The np-Au electrodes that are prepared using electrochemical techniques are robust and are easier to handle for their use in electrochemical biosensing. Here, we review different electrochemical strategies for the preparation, post-modification, and characterization of np-Au along with the synergistic use of both electrochemistry and np-Au for applications in biosensing.
RESUMEN
The interactions of the lectin Concanavalin A (Con A) with self-assembled monolayers (SAMs) of thiolated mono-, di-, and tri-mannosides were studied on the surface of gold wires using electrochemical impedance spectroscopy (EIS). The SAMs of mannosides were prepared either pure or along with thiolated triethylene glycol (TEG) at different molar ratios (1:1, 1:2, 1:4, 1:9, and 1:19) to better understand and optimize the interaction conditions. The charge-transfer resistance of the [Fe(CN)6]3-/4- redox probe was compared before and after the interaction at different concentrations of Con A to determine the equilibrium dissociation constant (Kd) and limit of detection (LOD). Values of Kd were found in the nanomolar range showing multivalent interactions between mannosides and Con A, and LOD was found ranging from 4-13 nM depending on the type of mannoside SAM used. Analysis using the Hill equation suggests negative cooperativity in the binding behavior. Peanut agglutinin was used as a negative control, and cyclic voltammetry was used to further support the experiments. We have found that neither the pure nor the widely dispersed monolayers of mannosides provide the conditions for optimal binding of Con A. The binding of Con A to these SAMs is sensitive to the molar ratio of the mannoside used to prepare the SAM and to the structure of the mannoside. A simple cleaning method has also been shown to regenerate the used gold wire electrodes. The results from these experiments contribute to the development of simple, cheap, selective, and sensitive EIS-based bioassays, especially for lectin-carbohydrate interactions.
RESUMEN
Electrochemical impedance spectroscopy (EIS) is used to compare the apparent electron transfer rate constant (kapp) for a series of alkanethiol and of carbohydrate-terminated alkanethiol self-assembled monolayers (SAMs) on both flat gold and on nanoporous gold (np-Au). Using the surface area for np-Au determined by oxide stripping, the values of kapp for the alkanethiol modified np-Au are initially over two orders of magnitude smaller than the values found on flat Au. This result provides evidence that the diffusing redox probe Fe(CN)63-/4- only accesses a fraction of the np-Au surface after alkanethiol modification suggesting very limited wetting of the internal pores due to the hydrophobic nature of these surfaces. In contrast, for np-Au modified by carbohydrate-terminated (mannose or galactose) alkanethiols the values of kapp are about 10-40 fold smaller than on flat gold, suggesting more extensive access of the diffusing redox probe within the pores and better but still incomplete wetting, a result also found for modification of np-Au with mercaptododecanoic acid. A short chain PEG thiol derivative is found to result in a comparison of kapp values that suggests nearly complete wetting of the internal pores for this highly hydrophilic derivative. These results are of significance for the potential applications of SAM modified np-Au in electrochemical sensors, especially for those based on carbohydrate-protein recognition, or those of np-Au modified by SAMs with polar terminal groups.
RESUMEN
Localized surface plasmon resonance (LSPR) spectroscopy is a label-free chemical and biological molecular sensing technique whose sensitivity depends upon development of nanostructured transducers. Herein, we report an electrodeposition method for fabricating nanostructured gold films (NGFs) that can be used as transducers in LSPR spectroscopy. The NGF was prepared by electrodepositing gold from potassium dicyanoaurate solution onto a flat gold surface using two sequential controlled potential steps. Imaging by scanning electron microscopy reveals a morphology consisting of randomly configured block-like nanostructures. The bulk refractive index sensitivity of the prepared NGF is 100±2 nmRIU(-1) and the initial peak in the reflectance spectrum is at 518±1 nm under N2(g). The figure of merit is 1.7. In addition, we have studied the interaction between carbohydrate (mannose) and lectin (Concanavalin A) on the NGF surface using LSPR spectroscopy by measuring the interaction of 8-mercaptooctyl-α-d-mannopyranoside (αMan-C8-SH) with Concanavalin A by first immobilizing αMan-C8-SH in mixed SAMs with 3,6-dioxa-8-mercaptooctanol (TEG-SH) on the NGF surface. The interaction of Con A with the mixed SAMs is confirmed using electrochemical impedance spectroscopy. Finally, the NGF surface was regenerated to its original sensitivity by removing the SAM and the bound biomolecules. The results from these experiments contribute toward the development of inexpensive LSPR based sensors that could be useful for studying glycan-protein interactions and other bioanalytical purposes.
Asunto(s)
Metabolismo de los Hidratos de Carbono , Concanavalina A/metabolismo , Oro/química , Nanoestructuras/química , Resonancia por Plasmón de Superficie , Electroquímica , Galvanoplastia , Unión ProteicaRESUMEN
The surface of nanoporous gold (np-Au) monoliths was modified via a flow method with the lectin Concanavalin A (Con A) to develop a substrate for separation and extraction of glycoproteins. Self-assembled monolayers (SAMs) of α-lipoic acid (LA) on the np-Au monoliths were prepared followed by activation of the terminal carboxyl groups to create amine reactive esters that were utilized in the immobilization of Con A. Thermogravimetric analysis (TGA) was used to determine the surface coverages of LA and Con A on np-Au monoliths which were found to be 1.31×10(18) and 1.85×10(15)moleculesm(-2), respectively. An in situ solution depletion method was developed that enabled surface coverage characterization without damaging the substrate and suggesting the possibility of regeneration. Using this method, the surface coverages of LA and Con A were found to be 0.989×10(18) and 1.32×10(15)moleculesm(-2), respectively. The selectivity of the Con A-modified np-Au monolith for the high mannose-containing glycoprotein ovalbumin (OVA) versus negative control non-glycosylated bovine serum albumin (BSA) was demonstrated by the difference in the ratio of the captured molecules to the immobilized Con A molecules, with OVA:Con A=2.3 and BSA:Con A=0.33. Extraction of OVA from a 1:3 mole ratio mixture with BSA was demonstrated by the greater amount of depletion of OVA concentration during the circulation with the developed substrate. A significant amount of captured OVA was eluted using α-methyl mannopyranoside as a competitive ligand. This work is motivated by the need to develop new materials for chromatographic separation and extraction substrates for use in preparative and analytical procedures in glycomics.
Asunto(s)
Glicómica/métodos , Glicoproteínas/química , Glicoproteínas/aislamiento & purificación , Oro/química , Lectinas/química , Animales , Bovinos , Concanavalina A/química , Ovalbúmina/química , Ácido Tióctico/químicaRESUMEN
Electrochemical enzyme-linked lectinsorbent assays (ELLA) were developed using nanoporous gold (NPG) as a solid support for protein immobilization and as an electrode for the electrochemical determination of the product of the reaction between alkaline phosphatase (ALP) and p-aminophenyl phosphate (p-APP), which is p-aminophenol (p-AP). Glycoproteins or concanavalin A (Con A) and ALP conjugates were covalently immobilized onto lipoic acid self-assembled monolayers on NPG. The binding of Con A - ALP (or soybean agglutinin - ALP) conjugate to glycoproteins covalently immobilized on NPG and subsequent incubation with p-APP substrate was found to result in square-wave voltammograms whose peak difference current varied with the identity of the glycoprotein. NPG presenting covalently bound glycoproteins was used as the basis for a competitive electrochemical assay for glycoproteins in solution (transferrin and IgG). A kinetic ELLA based on steric hindrance of the enzyme-substrate reaction and hence reduced enzymatic reaction rate after glycoprotein binding is demonstrated using immobilized Con A-ALP conjugates. Using the immobilized Con A-ALP conjugate, the binding affinity of immunoglobulin G (IgG) was found to be 105 nM, and that for transferrin was found to be 650 nM. Minimal interference was observed in the presence of 5 mg mL-1 BSA as a model serum protein in both the kinetic and competitive ELLA. Inhibition studies were performed with methyl D-mannoside for the binding of TSF and IgG to Con A-ALP; IC50 values were found to be 90 µM and 286 µM, respectively. Surface coverages of proteins were estimated using solution depletion and the BCA protein concentration assay.