RESUMEN
PURPOSE: PIK3CA-related overgrowth spectrum (PROS) conditions of the head and neck are treatment challenges. Traditionally, these conditions require multiple invasive interventions, with incomplete malformation removal, disfigurement, and possible dysfunction. Use of the PI3K inhibitor alpelisib, previously shown to be effective in PROS, has not been reported in PIK3CA-associated head and neck lymphatic malformations (HNLMs) or facial infiltrating lipomatosis (FIL). We describe prospective treatment of 5 children with PIK3CA-associated HNLMs or head and neck FIL with alpelisib monotherapy. METHODS: A total of 5 children with PIK3CA-associated HNLMs (n = 4) or FIL (n = 1) received alpelisib monotherapy (aged 2-12 years). Treatment response was determined by parental report, clinical evaluation, diary/questionnaire, and standardized clinical photography, measuring facial volume through 3-dimensional photos and magnetic resonance imaging. RESULTS: All participants had reduction in the size of lesion, and all had improvement or resolution of malformation inflammation/pain/bleeding. Common invasive therapy was avoided (ie, tracheotomy). After 6 or more months of alpelisib therapy, facial volume was reduced (range 1%-20%) and magnetic resonance imaging anomaly volume (range 0%-23%) were reduced, and there was improvement in swallowing, upper airway patency, and speech clarity. CONCLUSION: Individuals with head and neck PROS treated with alpelisib had decreased malformation size and locoregional overgrowth, improved function and symptoms, and fewer invasive procedures.
Asunto(s)
Fosfatidilinositol 3-Quinasas , Tiazoles , Niño , Humanos , Fosfatidilinositol 3-Quinasas/genética , Mutación , Fosfatidilinositol 3-Quinasa Clase I/genética , Tiazoles/uso terapéuticoRESUMEN
BACKGROUND: Facioscapulohumeral muscular dystrophy (FSHD) is a patchy and slowly progressive disease of skeletal muscle. MRI short tau inversion recovery (STIR) sequences of patient muscles often show increased hyperintensity that is hypothesized to be associated with inflammation. This is supported by the presence of inflammatory changes on biopsies of STIR-positive muscles. We hypothesized that the STIR positivity would normalize with targeted immunosuppressive therapy. CASE PRESENTATION: 45-year-old male with FSHD type 1 was treated with 12 weeks of immunosuppressive therapy, tacrolimus and prednisone. Tacrolimus was treated to a goal serum trough of > 5 ng/mL and prednisone was tapered every month. Quantitative strength exam, functional outcome measures, and muscle MRI were performed at baseline, week 6, and week 12. The patient reported subjective worsening as reflected in quantitative strength exam. The MRI STIR signal was slightly increased from 0.02 to 0.03 of total muscle; while the T1 fat fraction was stable. Functional outcome measures also were stable. CONCLUSIONS: Immunosuppressive therapy in refractive autoimmune myopathy in other contexts has been shown to reverse STIR signal hyperintensity, however this treatment did not reverse STIR signal in this patient with FSHD. In fact, STIR signal slightly increased throughout the treatment period. This is the first study of using MRI STIR and T1 fat fraction to follow treatment effect in FSHD. We find that STIR might not be a dynamic marker for suppressing inflammation in FSHD.
Asunto(s)
Distrofia Muscular Facioescapulohumeral , Humanos , Imagen por Resonancia Magnética , Masculino , Persona de Mediana Edad , Músculo Esquelético/diagnóstico por imagen , Distrofia Muscular Facioescapulohumeral/diagnóstico por imagen , Distrofia Muscular Facioescapulohumeral/tratamiento farmacológico , Evaluación de Resultado en la Atención de Salud , Prednisona/uso terapéutico , Tacrolimus/uso terapéuticoRESUMEN
BACKGROUND: Abnormal cerebrospinal fluid (CSF) flow is associated with a variety of poorly understood neurological disorders such as Alzheimer's Disease and hydrocephalus. The lack of comprehensive understanding of the fluid and solid mechanics of CSF flow remains a critical barrier in the development of diagnostic assessment and potential treatment options for these diseases. We have developed a whole brain, patient-specific computational fluid dynamics (CFD) simulation of CSF flow in the cranial cavity as a step towards comprehensive understanding of CSF dynamics and how they relate to neurodegenerative diseases. METHODS: A patient-specific 3D geometry of the CSF filled spaces was segmented from structural MRI. Patient-specific boundary conditions were measured using phase contrast MRI. A rigid wall three-dimensional CFD simulation was conducted using only patient-specific waveforms as boundary conditions. Deformation of brain tissue is accounted for using volumetric flowrate boundary conditions calculated via the conservation of mass. Phase contrast MRI measurement of maximum velocity at the cerebral aqueduct was used to validate the simulation with excellent agreement. RESULTS: The CSF dynamics across the cardiac cycle are presented, illustrating the relationship between arterial flow and CSF flow. Flow in and out of the ventricles was shown to have a slight phase delay (â¼20 % of the cardiac cycle) from flow in the subarachnoid space. Intracranial pressure dynamics are presented, with pressure in the Lateral Ventricles demonstrating less significant transient effects than pressure in the subarachnoid space. CONCLUSIONS: This work presents a quantitatively validated whole-brain simulation of CSF flow for a single healthy subject. The computational methodology improves over the state of the art by eliminating non-physiological boundary conditions and unnecessary assumptions about the mechanical properties of brain tissue, providing an essential step towards clinically useful tools for assessing the development of neurodegenerative disorders.
Asunto(s)
Hidrocefalia , Hidrodinámica , Encéfalo/fisiología , Ventrículos Cerebrales/diagnóstico por imagen , Líquido Cefalorraquídeo , Humanos , Imagen por Resonancia Magnética/métodosRESUMEN
OBJECTIVES: To evaluate the performance of 4-dimensional computed tomography (4D-CT) in assessing upper airway obstruction (UAO) in patients with Robin sequence (RS) and compare the accuracy and reliability of 4D-CT and flexible fiber-optic laryngoscopy (FFL). STUDY DESIGN: Prospective survey of retrospective clinical data. SETTING: Single, tertiary care pediatric hospital. METHODS: At initial and 30-day time points, a multidisciplinary group of 11 clinicians who treat RS rated UAO severity in 32 sets of 4D-CT visualizations and FFL videos (dynamic modalities) and static CT images. Raters assessed UAO at the velopharynx and oropharynx (1 = none to 5 = complete) and noted confidence levels of each rating. Intraclass correlation and Krippendorff alpha were used to assess intra- and interrater reliability, respectively. Accuracy was assessed by comparing clinician ratings with quantitative percentage constriction (QPC) ratings, calculated based on 4D-CT airway cross-sectional area. Results were compared using Wilcoxon rank-sum and signed-rank tests. RESULTS: There was similar intrarater agreement (moderate to substantial) with 4D-CT and FFL, and both demonstrated fair interrater agreement. Both modalities underestimated UAO severity, although 4D-CT ratings were significantly more accurate, as determined by QPC similarity, than FFL (-1.06 and -1.46 vs QPC ratings, P = .004). Overall confidence levels were similar for 4D-CT and FFL, but other specialists were significantly less confident in FFL ratings than were otolaryngologists (2.25 and 3.92, P < .0001). CONCLUSION: Although 4D-CT may be more accurate in assessing the degree of UAO in patients with RS, 4D-CT and FFL assessments demonstrate similar reliability. Additionally, 4D-CT may be interpreted with greater confidence by nonotolaryngologists who care for these patients.
Asunto(s)
Laringoscopía , Síndrome de Pierre Robin , Niño , Tomografía Computarizada Cuatridimensional , Humanos , Laringoscopía/métodos , Síndrome de Pierre Robin/diagnóstico por imagen , Estudios Prospectivos , Reproducibilidad de los Resultados , Estudios RetrospectivosRESUMEN
Thorough assessment of dynamic upper airway obstruction (UAO) in Robin sequence (RS) is critical, but traditional evaluation modalities have significant limitations. Four-dimensional computed tomography (4D-CT) is promising in that it enables objective and quantitative evaluation throughout all phases of respiration. However, there exist few protocols or analysis tools to assist in obtaining and interpreting the vast amounts of obtained data. A protocol and set of data analysis tools were developed to enable quantification and visualization of dynamic 4D-CT data. This methodology was applied to a sample case at 2 time points. In the patient with RS, overall increases in normalized airway caliber were observed from 5 weeks to 1 year. There was, however, continued dynamic obstruction at all airway levels, though objective measures of UAO did improve at the nasopharynx and oropharynx. Use of 4D-CT and novel analyses provide additional quantitative information to evaluate UAO in patients with RS.
Asunto(s)
Tomografía Computarizada Cuatridimensional , Faringe/diagnóstico por imagen , Síndrome de Pierre Robin/diagnóstico por imagen , Femenino , Humanos , Lactante , Cavidad Nasal/diagnóstico por imagenRESUMEN
Background The accuracy of absolute myocardial blood flow (MBF) from dynamic contrast-enhanced cardiac computed tomography acquisitions has not been fully characterized. We evaluate computed tomography (CT) compared with rubidium-82 positron emission tomography (PET) MBF estimates in a high-risk population. Methods In a prospective trial, patients receiving clinically indicated rubidium-82 PET exams were recruited to receive a dynamic contrast-enhanced cardiac computed tomography exam. The CT protocol included a rest and stress dynamic portion each acquiring 12 to 18 cardiac-gated frames. The global MBF was estimated from the PET and CT exam. Results Thirty-four patients referred for cardiac rest-stress PET were recruited. Of the 68 dynamic contrast-enhanced cardiac computed tomography scans, 5 were excluded because of injection errors or mismatched hemodynamics. The CT-derived global MBF was highly correlated with the PET MBF (r=0.92; P<0.001) with a mean difference of 0.7±26.4%. The CT MBF estimates were within 20% of PET estimates ( P<0.02) with a mean of (1) MBF for resting flow of PET versus CT of 0.9±0.3 versus 1.0±0.2 mL/min per gram and (2) MBF for stress flow of 2.1±0.7 versus 2.0±0.8 mL/min per gram. Myocardial flow reserve was -14±28% underestimated with CT (PET versus CT myocardial flow reserve, 2.5±0.6 versus 2.2±0.6). The proposed rest+stress+computed tomography angiography protocol had a dose length product of 598±76 mGy×cm resulting in an approximate effective dose of 8.4±1.1 mSv. Conclusions In a high-risk clinical population, a clinically practical dynamic contrast-enhanced cardiac computed tomography provided unbiased MBF estimates within 20% of rubidium-82 PET. Although unbiased, the CT estimates contain substantial variance with an standard error of the estimate of 0.44 mL/min per gram. Myocardial flow reserve estimation was not as accurate as individual MBF estimates.
Asunto(s)
Medios de Contraste , Circulación Coronaria/fisiología , Isquemia Miocárdica/diagnóstico por imagen , Isquemia Miocárdica/fisiopatología , Tomografía de Emisión de Positrones/métodos , Intensificación de Imagen Radiográfica/métodos , Tomografía Computarizada por Rayos X/métodos , Anciano , Velocidad del Flujo Sanguíneo/fisiología , Femenino , Humanos , Masculino , Estudios Prospectivos , Reproducibilidad de los Resultados , Radioisótopos de RubidioRESUMEN
Quantitative myocardial blood flow (MBF) estimation by dynamic contrast enhanced cardiac computed tomography (CT) requires multi-frame acquisition of contrast transit through the blood pool and myocardium to inform the arterial input and tissue response functions. Both the input and the tissue response functions for the entire myocardium are sampled with each acquisition. However, the long breath holds and frequent sampling can result in significant motion artifacts and relatively high radiation dose. To address these limitations, we propose and evaluate a new static cardiac and dynamic arterial (SCDA) quantitative MBF approach where (1) the input function is well sampled using either prediction from pre-scan timing bolus data or measured from dynamic thin slice 'bolus tracking' acquisitions, and (2) the whole-heart tissue response data is limited to one contrast enhanced CT acquisition. A perfusion model uses the dynamic arterial input function to generate a family of possible myocardial contrast enhancement curves corresponding to a range of MBF values. Combined with the timing of the single whole-heart acquisition, these curves generate a lookup table relating myocardial contrast enhancement to quantitative MBF. We tested the SCDA approach in 28 patients that underwent a full dynamic CT protocol both at rest and vasodilator stress conditions. Using measured input function plus single (enhanced CT only) or plus double (enhanced and contrast free baseline CT's) myocardial acquisitions yielded MBF estimates with root mean square (RMS) error of 1.2 ml/min/g and 0.35 ml/min/g, and radiation dose reductions of 90% and 83%, respectively. The prediction of the input function based on timing bolus data and the static acquisition had an RMS error compared to the measured input function of 26.0% which led to MBF estimation errors greater than threefold higher than using the measured input function. SCDA presents a new, simplified approach for quantitative perfusion imaging with an acquisition strategy offering substantial radiation dose and computational complexity savings over dynamic CT.
Asunto(s)
Arterias/diagnóstico por imagen , Enfermedad de la Arteria Coronaria/diagnóstico por imagen , Circulación Coronaria , Procesamiento de Imagen Asistido por Computador/métodos , Imagen de Perfusión Miocárdica/métodos , Tomografía Computarizada por Rayos X/métodos , Anciano , Enfermedad de la Arteria Coronaria/fisiopatología , Femenino , Humanos , Masculino , Miocardio/patologíaRESUMEN
The extension of the plasma membrane during cell crawling or spreading is known to require actin polymerization; however, the question of how pushing forces derive from actin polymerization remains open. A leading theory (herein referred to as elastic propulsion) illustrates how elastic stresses in networks growing on curved surfaces can result in forces that push particles. To date all examples of reconstituted motility have used curved surfaces, raising the possibility that such squeezing forces are essential for actin-based pushing. By contrast, other theories, such as molecular ratchets, neither require nor consider surface curvature to explain pushing forces. Here, we critically test the requirement of substrate curvature by reconstituting actin-based motility on polystyrene disks. We find that disks move through extracts in a manner that indicates pushing forces on their flat surfaces and that disks typically move faster than the spheres they are manufactured from. For a subset of actin tails that form on the perimeter of disks, we find no correlation between local surface curvature and tail position. Collectively the data indicate that curvature-dependent mechanisms are not required for actin-based pushing.
Asunto(s)
Actinas/metabolismo , Proteínas Bacterianas/metabolismo , Biopolímeros/metabolismo , Proteínas de la Membrana/metabolismo , Movimiento/fisiología , Actinas/fisiología , Proteínas Bacterianas/aislamiento & purificación , Fenómenos Biomecánicos , Biopolímeros/fisiología , Células Cultivadas , Proteínas de la Membrana/aislamiento & purificación , Microscopía Electrónica de Rastreo , Microesferas , PoliestirenosRESUMEN
Quantification of myocardial blood flow (MBF) can aid in the diagnosis and treatment of coronary artery disease. However, there are no widely accepted clinical methods for estimating MBF. Dynamic cardiac perfusion computed tomography (CT) holds the promise of providing a quick and easy method to measure MBF quantitatively. However, the need for repeated scans can potentially result in a high patient radiation dose, limiting the clinical acceptance of this approach. In our previous work, we explored techniques to reduce the patient dose by either uniformly reducing the tube current or by uniformly reducing the number of temporal frames in the dynamic CT sequence. These dose reduction techniques result in noisy time-attenuation curves (TACs), which can give rise to significant errors in MBF estimation. We seek to investigate whether nonuniformly varying the tube current and/or sampling intervals can yield more accurate MBF estimates for a given dose. Specifically, we try to minimize the dose and obtain the most accurate MBF estimate by addressing the following questions: when in the TAC should the CT data be collected and at what tube current(s)? We hypothesize that increasing the sampling rate and/or tube current during the time frames when the myocardial CT number is most sensitive to the flow rate, while reducing them elsewhere, can achieve better estimation accuracy for the same dose. We perform simulations of contrast agent kinetics and CT acquisitions to evaluate the relative MBF estimation performance of several clinically viable variable acquisition methods. We find that variable temporal and tube current sequences can be performed that impart an effective dose of 5.5 mSv and allow for reductions in MBF estimation root-mean-square error on the order of 20% compared to uniform acquisition sequences with comparable or higher radiation doses.
RESUMEN
Cardiac computed tomography (CT) acquisitions for perfusion assessment can be performed in a dynamic or static mode. Either method may be used for a variety of clinical tasks, including (1) stratifying patients into categories of ischemia and (2) using a quantitative myocardial blood flow (MBF) estimate to evaluate disease severity. In this simulation study, we compare method performance on these classification and quantification tasks for matched radiation dose levels and for different flow states, patient sizes, and injected contrast levels. Under conditions simulated, the dynamic method has low bias in MBF estimates (0 to [Formula: see text]) compared to linearly interpreted static assessment (0.45 to [Formula: see text]), making it more suitable for quantitative estimation. At matched radiation dose levels, receiver operating characteristic analysis demonstrated that the static method, with its high bias but generally lower variance, had superior performance ([Formula: see text]) in stratifying patients, especially for larger patients and lower contrast doses [area under the curve [Formula: see text] to 96 versus 0.86]. We also demonstrate that static assessment with a correctly tuned exponential relationship between the apparent CT number and MBF has superior quantification performance to static assessment with a linear relationship and to dynamic assessment. However, tuning the exponential relationship to the patient and scan characteristics will likely prove challenging. This study demonstrates that the selection and optimization of static or dynamic acquisition modes should depend on the specific clinical task.
RESUMEN
In many cell types, asynchronous or synchronous oscillations in the concentration of intracellular free calcium occur in adjacent cells that are coupled by gap junctions. Such oscillations are believed to underlie oscillatory intercellular calcium waves in some cell types, and thus it is important to understand how they occur and are modified by intercellular coupling. Using a previous model of intracellular calcium oscillations in pancreatic acinar cells, this article explores the effects of coupling two cells with a simple linear diffusion term. Depending on the concentration of a signal molecule, inositol (1,4,5)-trisphosphate, coupling two identical cells by diffusion can give rise to synchronized in-phase oscillations, as well as different-amplitude in-phase oscillations and same-amplitude antiphase oscillations. Coupling two nonidentical cells leads to more complex behaviors such as cascades of period doubling and multiply periodic solutions. This study is a first step towards understanding the role and significance of the diffusion of calcium through gap junctions in the coordination of oscillatory calcium waves in a variety of cell types. (c) 2001 American Institute of Physics.
RESUMEN
Contrast enhancement on cardiac CT provides valuable information about myocardial perfusion and methods have been proposed to assess perfusion with static and dynamic acquisitions. There is a lack of knowledge and consensus on the appropriate approach to ensure 1) sufficient diagnostic accuracy for clinical decisions and 2) low radiation doses for patient safety. This work developed a thorough dynamic CT simulation and several accepted blood flow estimation techniques to evaluate the performance of perfusion assessment across a range of acquisition and estimation scenarios. Cardiac CT acquisitions were simulated for a range of flow states (Flow = 0.5, 1, 2, 3 ml/g/min, cardiac output = 3,5,8 L/min). CT acquisitions were simulated with a validated CT simulator incorporating polyenergetic data acquisition and realistic x-ray flux levels for dynamic acquisitions with a range of scenarios including 1, 2, 3 sec sampling for 30 sec with 25, 70, 140 mAs. Images were generated using conventional image reconstruction with additional image-based beam hardening correction to account for iodine content. Time attenuation curves were extracted for multiple regions around the myocardium and used to estimate flow. In total, 2,700 independent realizations of dynamic sequences were generated and multiple MBF estimation methods were applied to each of these. Evaluation of quantitative kinetic modeling yielded blood flow estimates with an root mean square error (RMSE) of â¼0.6 ml/g/min averaged across multiple scenarios. Semi-quantitative modeling and qualitative static imaging resulted in significantly more error (RMSE = â¼1.2 and â¼1.2 ml/min/g respectively). For quantitative methods, dose reduction through reduced temporal sampling or reduced tube current had comparable impact on the MBF estimate fidelity. On average, half dose acquisitions increased the RMSE of estimates by only 18% suggesting that substantial dose reductions can be employed in the context of quantitative myocardial blood flow estimation. In conclusion, quantitative model-based dynamic cardiac CT perfusion assessment is capable of accurately estimating MBF across a range of cardiac outputs and tissue perfusion states, outperforms comparable static perfusion estimates, and is relatively robust to noise and temporal subsampling.
RESUMEN
Dynamic contrast-enhanced computed tomography (CT) could provide an accurate and widely available technique for myocardial blood flow (MBF) estimation to aid in the diagnosis and treatment of coronary artery disease. However, one of its primary limitations is the radiation dose imparted to the patient. We are exploring techniques to reduce the patient dose by either reducing the tube current or by reducing the number of temporal frames in the dynamic CT sequence. Both of these dose reduction techniques result in noisy data. In order to extract the MBF information from the noisy acquisitions, we have explored several data-domain smoothing techniques. In this work, we investigate two specific smoothing techniques: the sinogram restoration technique in both the spatial and temporal domains and the use of the Karhunen-Loeve (KL) transform to provide temporal smoothing in the sinogram domain. The KL transform smoothing technique has been previously applied to dynamic image sequences in positron emission tomography. We apply a quantitative two-compartment blood flow model to estimate MBF from the time-attenuation curves and determine which smoothing method provides the most accurate MBF estimates in a series of simulations of different dose levels, dynamic contrast-enhanced cardiac CT acquisitions. As measured by root mean square percentage error (% RMSE) in MBF estimates, sinogram smoothing generally provides the best MBF estimates except for the cases of the lowest simulated dose levels (tube current = 25 mAs, 2 or 3 s temporal spacing), where the KL transform method provides the best MBF estimates. The KL transform technique provides improved MBF estimates compared to conventional processing only at very low doses (<7 mSv). Results suggest that the proposed smoothing techniques could provide high fidelity MBF information and allow for substantial radiation dose savings.
RESUMEN
Myocardial blood flow (MBF) can be estimated from dynamic contrast enhanced (DCE) cardiac CT acquisitions, leading to quantitative assessment of regional perfusion. The need for low radiation dose and the lack of consensus on MBF estimation methods motivates this study to refine the selection of acquisition protocols and models for CT-derived MBF. DCE cardiac CT acquisitions were simulated for a range of flow states (MBF = 0.5, 1, 2, 3 ml (min g)(-1), cardiac output = 3, 5, 8 L min(-1)). Patient kinetics were generated by a mathematical model of iodine exchange incorporating numerous physiological features including heterogenenous microvascular flow, permeability and capillary contrast gradients. CT acquisitions were simulated for multiple realizations of realistic x-ray flux levels. CT acquisitions that reduce radiation exposure were implemented by varying both temporal sampling (1, 2, and 3 s sampling intervals) and tube currents (140, 70, and 25 mAs). For all acquisitions, we compared three quantitative MBF estimation methods (two-compartment model, an axially-distributed model, and the adiabatic approximation to the tissue homogeneous model) and a qualitative slope-based method. In total, over 11 000 time attenuation curves were used to evaluate MBF estimation in multiple patient and imaging scenarios. After iodine-based beam hardening correction, the slope method consistently underestimated flow by on average 47.5% and the quantitative models provided estimates with less than 6.5% average bias and increasing variance with increasing dose reductions. The three quantitative models performed equally well, offering estimates with essentially identical root mean squared error (RMSE) for matched acquisitions. MBF estimates using the qualitative slope method were inferior in terms of bias and RMSE compared to the quantitative methods. MBF estimate error was equal at matched dose reductions for all quantitative methods and range of techniques evaluated. This suggests that there is no particular advantage between quantitative estimation methods nor to performing dose reduction via tube current reduction compared to temporal sampling reduction. These data are important for optimizing implementation of cardiac dynamic CT in clinical practice and in prospective CT MBF trials.
Asunto(s)
Circulación Coronaria , Procesamiento de Imagen Asistido por Computador/métodos , Modelos Biológicos , Imagen de Perfusión Miocárdica , Tomografía Computarizada por Rayos X/métodos , Dosis de Radiación , Factores de TiempoRESUMEN
Multi-cell migration is important for tissue development and repair. An experimentally accessible example of multi-cell migration is provided by the classic scratch-wound assay. In this assay, a confluent monolayer is 'injured' by forcibly removing a strip of cells, and the remaining monolayer 'heals' through some combination of cell migration, spreading and proliferation. The scratch wound has been used for decades as a model of wound healing and an assay of cell migration, however the mechanisms that underlie the coherent expansion of cells in the surviving monolayer are still debated. Here we develop an agent-based computational model that predicts the most robust characteristics of healing in scratch wounds. The cells in our model are simple mechanical agents that respond to cell contact by redirecting migration and slowing division. We imbued model cells with crawling and growth dynamics and measured for individual L1 fibroblasts and found that simulated recovery occurs in a steady, sheet-like and division-independent fashion to mimic healing by L1s. The lack of cohesion and biochemical cell-cell communication in the model suggests that these factors are not strictly necessary for cells to migrate as a group. Instead, our analysis suggests that steady sheet migration can be explained by cell spreading in the monolayer.
Asunto(s)
Movimiento Celular/fisiología , Proliferación Celular , Células 3T3 , Algoritmos , Animales , Recuento de Células , División Celular , Ratones , Modelos Biológicos , Estrés Mecánico , Factores de TiempoRESUMEN
In this report we extend our recent mathematical formulation of the actin cycle model [Bindschadler et al. Biophys. J. 86 (2004) 2720] to predict the influence of key regulatory mechanisms on network-scale state variables estimable in live cell experiments. Specifically, we examine the influence of regulation by cofilin, profilin, capping protein and proteins that adjust filament number through nucleation and/or filament severing, on the higher order variables of average filament length, polymer fraction, and filament turnover rate. Importantly, we find that severing/nucleation, the acceleration of ADP-subunit disassembly by cofilin, and the catalytic and shuttle functions of profilin have 'signature' effects on the higher order state variables. In this way, measurement of the state variables in live cells can allow inference of regulatory mechanism(s) underlying changes in cell state. Our results compare favorably to published data for endothelial cells undergoing a transition from non-motile confluent cells to highly motile subconfluent cells. The extension of our model to higher order state variables allows us to investigate other important issues such as the distinction between basic and higher order measures of filament dynamics, the influence of thymosin beta4 on network state variables, the interplay between thymosin beta4 and profilin, and the synergystic effects of cofilin and profilin.