A vertebral skeletal stem cell lineage driving metastasis.

Vertebral bone is subject to a distinct set of disease processes from long bones, including a much higher rate of solid tumour metastases1-4. The basis for this distinct biology of vertebral bone has so far remained unknown. Here we identify a vertebral skeletal stem cell (vSSC) that co-expresses ZIC1 and PAX1 together with additional cell surface markers. vSSCs display formal evidence of stemness, including self-renewal, label retention and sitting at the apex of their differentiation hierarchy. vSSCs are physiologic mediators of vertebral bone formation, as genetic blockade of the ability of vSSCs to generate osteoblasts results in defects in the vertebral neural arch and body. Human counterparts of vSSCs can be identified in vertebral endplate specimens and display a conserved differentiation hierarchy and stemness features. Multiple lines of evidence indicate that vSSCs contribute to the high rates of vertebral metastatic tropism observed in breast cancer, owing in part to increased secretion of the novel metastatic trophic factor MFGE8. Together, our results indicate that vSSCs are distinct from other skeletal stem cells and mediate the unique physiology and pathology of vertebrae, including contributing to the high rate of vertebral metastasis.

The Infected Polypropylene Mesh: When Does Biofilm Form and Which Antiseptic Solution Most Effectively Removes It?

BACKGROUND: Polypropylene (PPE) mesh is commonly utilized to reconstruct catastrophic extensor mechanism disruptions in revision total knee arthroplasty. Unfortunately, these procedures are associated with a high rate of periprosthetic joint infection. The purpose of the current study was to: 1) visualize and quantify the progression of bacterial biofilm growth on PPE-mesh; and 2) determine which antiseptic solutions effectively remove viable bacteria. METHODS: Knitted PPE mesh samples were cultured with either methicillin-sensitive Staphylococcus aureus (MSSA) or Escherichia coli (E. coli) for 7 days, with regular quantification of colony forming units (CFUs) and visualization using scanning electron microscopy to identify maturity. Immature (24 hour) and mature (72 hour) biofilm was treated with one of 5 commercial antiseptics for 3 minutes. A 0.05% chlorhexidine gluconate, a surfactant-based formulation of ethanol, acetic acid, sodium acetate, benzalkonium chloride, diluted povidone-iodine (0.35%), undiluted (10%) povidone-iodine, and 1:1 combination of 10% povidone-iodine and 3% hydrogen peroxide. A 3-log reduction in CFUs compared to saline was considered clinically meaningful. RESULTS: The CFU counts plateaued, indicating maturity, at 72 hours for both MSSA and E. coli. The scanning electron microscopy confirmed confluent biofilm formation after 72 hours. The 10% povidone-iodine was clinically effective against all MSSA biofilms and immature E. coli biofilms. The 10% povidone-iodine with hydrogen peroxide was effective in all conditions. Only 10% povidone iodine formulations produced significantly (P < .0083) reduced CFU counts against mature biofilms. CONCLUSIONS: Bacteria rapidly form biofilm on PPE mesh. Mesh contamination can be catastrophic, and clinicians should consider utilizing an antiseptic solution at the conclusion of mesh implantation. Undiluted povidone-iodine with hydrogen peroxide should be considered when attempting to salvage infected PPE mesh.

Does Acetabular Bone Loss Severity Associate With Patient-Reported Outcome Measures and Reoperation Rate in Revision Total Hip Arthroplasty?

BACKGROUND: Acetabular bone loss is a challenging clinical problem when performing revision total hip arthroplasty (rTHA). This study aimed to evaluate how acetabular bone loss severity influences (1) clinical outcomes and (2) patient-reported outcome measures (PROMs) in rTHA patients. METHODS: Patients who underwent rTHA with acetabular component revision from January 2016 to February 2022 were included. Treating surgeons determined Paprosky acetabular bone loss classification intraoperatively. Patients were grouped based on numeric classification (PI, PII, or PIII) to categorize severity. Hip disability and Osteoarthritis Outcome Score for Joint Replacement (HOOS, JR.) and Lower Extremity Activity Scale (LEAS) score were collected preoperatively and 1 year postoperatively. There were 197 patients included. Paprosky classification was PI for 47 patients (23.9%), PII for 113 patients (57.4%), and PIII for 37 patients (18.8%). Mean clinical follow-up was 29 months (range, 1 to 69). RESULTS: Reoperation rate was 0% (0 patients), 6.2% (7 patients), and 10.8% (4 patients) for PI, PII and PIII groups respectively (P = .052). Mean preoperative HOOS, JR. and LEAS for PI, PII and PIII groups were significantly different, but 1-year postoperative HOOS, JR. and LEAS did not differ significantly. Rates of HOOS, JR. minimal clinically important difference achievement differed significantly between bone loss groups. CONCLUSION: In this study of rTHA patients, greater acetabular bone loss severity was associated with worse preoperative PROMs and trended toward higher reoperation rate. Postoperative PROMs for bone loss severity groups were statistically similar. Patients who had worse acetabular bone loss were more likely to achieve HOOS, JR. minimal clinically important difference postoperatively. LEVEL OF EVIDENCE: III.

Femoral Component Undersizing and Alignment are Risk Factors for Early Periprosthetic Femur Fracture.

BACKGROUND: Known risk factors for early periprosthetic femur fracture (PFF) following total hip arthroplasty (THA) include poor bone quality and the use of cementless implants. The association between femoral component size and alignment and the risk of early PFF is not well described. We evaluated radiographic parameters of femoral component sizing and alignment as risk factors for early PFF. METHODS: From 16,065 primary cementless THAs, we identified 66 cases (0.41%) of early PFFs (<90 days from index THA) at a single institution between 2016 and 2020. Sixty early PFFs were (1:2) matched to 120 controls based on the femoral component model, offset, surgical approach, age, body mass index (BMI), and gender. Radiographic assessment of preoperative bone morphology and postoperative femoral component orientation included stem alignment, metaphyseal fill, and implant congruence with medial cortical bone. A multivariable logistic regression was built to identify radiographic risk factors associated with early PFF. RESULTS: Markers of preoperative bone quality including canal calcar ratio (P = .003), canal flare index (P < .001), anteroposterior canal bone ratio (CBR) (P < .001), and lateral CBR (P < .001) were statistically associated with PFF. Distance between the medial cortical bone and implant was greater in cases of PFF (2.5 mm vs 1.4 mm) (P < .001). A multivariate analysis demonstrated that a larger lateral metaphyseal CBR (Odds Ratio [OR] 5), valgus implant alignment (OR 5), and medial implant-bone incongruity (OR 2) increased the risk of early PFF. CONCLUSION: A larger lateral metaphyseal CBR, valgus component alignment, and implant incongruity with medial cortical bone posed the greatest radiographic risk for early PFF following cementless THA.

The AAHKS Best Podium Presentation Research Award: Comparing the Efficacy of Irrigation Solutions on Staphylococcal Biofilm Formed on Arthroplasty Surfaces.

BACKGROUND: A diverse array of antibacterial solutions is utilized by orthopedic surgeons in an attempt to disperse bacterial biofilm. Few studies compare these agents against biofilm grown on clinically relevant orthopedic biomaterials, such as plastic, acrylic cement, and porous titanium. METHODS: MSSA biofilm was grown on plastic 48-well plates, polymethylmethacrylate cement beads and porous Ti-6Al-4V acetabular screw caps. Antibacterial solutions were tested according to manufacturer guidance and included: isotonic saline, vancomycin (1 mg/mL), polymyxin-bacitracin (500,000 U/L-50,000 U/L), povidone-iodine 0.3%, povidone-iodine 10%, a 1:1 combination of povidone-iodine 10% & 4% hydrogen peroxide, polyhexamethylene biguanide (PHMB) and betaine 0.04%, a commercial solution containing chlorhexidine gluconate (CHG) 0.05%, and a commercial solution containing benzalkonium chloride and ethanol. Twenty four and 72-hour biofilms were exposed to solutions for 3 minutes to reproduce intraoperative conditions. Solution efficacy was measured through sonication of treated surfaces followed by counting colony forming units and validated with a resazurin assay to assess cell viability. Experiments were performed in triplicate and repeated at least once. A three-fold log reduction in CFU counts versus controls was considered as a measure of solution efficacy. RESULTS: Saline, vancomycin and polymyxin-bacitracin were ineffective compared to other solutions against planktonic MSSA. Povidone-iodine 10% and a 1:1 solution of povidone-iodine 10% and 4% hydrogen peroxide were the only effective solutions against biofilm across all three surfaces and time points. CONCLUSION: Commercial antibacterial solutions vary significantly in their efficacy against MSSA biofilm. Efficacy globally decreased as biofilm maturity increased. Increased solution cost did not confer increased efficacy.

Analysis of Hip and Knee Reconstruction Questions on the Orthopedic In-Training Examination.

BACKGROUND: It is vital for orthopedic residents and residency programs to have a current understanding of the materials and resources utilized on the Orthopedic In-Training Examination (OITE) to tailor resident educational curricula accordingly. This study presents an updated analysis of the hip and knee section of the OITE. METHODS: All OITE questions related to hip and knee reconstruction over six examinations between 2014 and 2019 were analyzed for topic, subtopic, taxonomy, imaging modalities, resident performance, and references. RESULTS: There were 166 hip and knee reconstruction questions of 1600 OITE questions (10.4%) over a six-year period. The most commonly tested topics include mechanical properties of total knee and hip implants (10.8%), instability after THA (10.8%), periprosthetic fracture (10.2%), and prosthetic joint infection (10.2%). A total of 362 references were cited from 68 different sources. The most common sources were JOA, JBJS, JAAOS, and CORR, which were collectively responsible for 68% of all citations. There was an average publication lag of 7.1 years, with 75% of all citations falling within 10 years of the question date. Compared with a prior analysis from 2005 and 2009, there were significantly more complex multistep questions regarding treatment and fewer one-step knowledge recall questions (P = .003). Similarly, recent tests had significantly more questions involving interpretation of radiographs (55%, P < .001) and advanced imaging (9.6%, P < .001), compared with a decade ago. CONCLUSIONS: The OITE continues to evolve over time, incorporating recent literature and topics. The current analysis identifies high-yield topics and resources that can guide resident preparation for the OITE hip and knee section.

Joint Replacements in Individuals With Skeletal Dysplasias: One Institution's Experience and Response to Operative Complications.

BACKGROUND: Skeletal dysplasias are a heterogeneous group of >400 genetic disorders characterized by abnormal bone growth. Many individuals experience joint pain and limitation, coming to require joint replacement much earlier than the average-statured population. In addition, prosthesis survival rate is less in the dysplastic population. The purpose of this study is to identify risk factors for surgery and provide recommendations to improve surgical outcomes. METHODS: This a retrospective review of 29 individuals with a skeletal dysplasia who had 64 joint replacements between April 1985 and January 2019 at a single institution. We collected demographics, physical examination, medical history, imaging studies, surgical indication, and complications. RESULTS: Spondyloepiphyseal dysplasia was the most common skeletal dysplasia (7), followed by pseudoachondroplasia (4) and multiple epiphyseal dysplasia (4). Average age of the cohort was 40.6 years (range 14-64). Hip arthroplasty (34) was the most commonly performed surgery. The majority of arthroplasties (75%) required custom components. Complication rate was 37.3%, most commonly pulmonary embolism (3) and pneumonia (3). Most complications (81.8%) occurred in individuals with either a pre-existing cardiopulmonary comorbidity or lumbar/sacral deformity. Body mass index did not correlate with complication severity (R = -0.042, P = .752) or rate (R = 0.006, P = .963). CONCLUSION: Surgical complications are highest in patients with pre-existing cardiopulmonary conditions. Body mass index does not predict complications in this cohort. Preoperative evaluations for individuals with skeletal dysplasias should include comprehensive work-up of spine issues and extraskeletal systems that present an operative risk. Intraoperative protocol should include special consideration for placement on the table, airway maintenance, and spinal cord monitoring in select cases.

Disruption of the Gut Microbiome Increases the Risk of Periprosthetic Joint Infection in Mice.

BACKGROUND: Periprosthetic joint infection (PJI) is one of the most devastating complications of total joint arthroplasty. Given the mortality and morbidity associated with PJI and the challenges in treating it, there has been increased interest in risk factors that can be modified before surgery. In this study, we used a novel mouse model to consider the role of the gut microbiome as a risk factor for PJI. QUESTIONS/PURPOSES: (1) Does the state of the gut microbiota before surgery influence the likelihood of developing an established infection in a mouse model of PJI? (2) How does the state of the gut microbiota before surgery influence the local and systemic response to the presence of an established infection in a mouse model of PJI? METHODS: Male C57Bl/6 mice were divided into two groups: those with modified microbiome [INCREMENT]microbiome (n = 40) and untreated mice (n = 42). In [INCREMENT]microbiome mice, the gut flora were modified using oral neomycin and ampicillin from 4 weeks to 16 weeks of age. Mice received a titanium tibial implant to mimic a joint implant and a local inoculation of Staphylococcus aureus in the synovial space (10 colony forming units [CFUs]). The proportion of animals developing an established infection in each group was determined by CFU count. The local and systemic response to established infection was determined using CFU counts in surrounding joint tissues, analysis of gait, radiographs, body weight, serum markers of inflammation, and immune cell profiles and was compared with animals that received the inoculation but resisted infection. RESULTS: A greater proportion of animals with disrupted gut microbiota had infection (29 of 40 [73%]) than did untreated animals (21 of 42 [50%]; odds ratio, 2.63, 95% CI, 1.04-6.61; p = 0.035). The immune response to established infection in mice with altered microbiota was muted; serum amyloid A, a marker of systemic infection in mice, was greater than in mice with disrupted gut microbiota with infection (689 µg/dL; range, 68-2437 µg/dL, p < 0.05); infection associated increases in monocytes and neutrophils in the spleen and local lymph node in untreated mice but not were not observed in mice with disrupted gut microbiota. CONCLUSIONS: The findings from this in vivo mouse model suggest that the gut microbiota may influence susceptibility to PJI. CLINICAL RELEVANCE: These preclinical findings support the idea that the state of the gut microbiome before surgery may influence the development of PJI and justify further preclinical and clinical studies to develop appropriate microbiome-based interventions.

Selected Heat-Sensitive Antibiotics Are Not Inactivated During Polymethylmethacrylate Curing and Can Be Used in Cement Spacers for Periprosthetic Joint Infection.

BACKGROUND: Antibiotic use in polymethylmethacrylate (PMMA) spacers has historically been limited to those which are "heat-stable" and thus retain their antimicrobial properties after exposure to the high temperatures which occur during PMMA curing. METHODS: This study examines the requirement of "heat stability" by measuring temperatures of Palacos and Simplex PMMA as they cure inside commercial silicone molds of the distal femur and proximal tibia. Temperature probes attached to thermocouples were placed at various depths inside the molds and temperatures were recorded for 20 minutes after PMMA introduced and a temperature curve for each PMMA product was determined. A "heat-stable" antibiotic, vancomycin, and a "heat-sensitive" antibiotic, ceftazidime, were placed in a programmable thermocycler and exposed to the same profile of PMMA curing temperatures. Antimicrobial activity against Staphylococcus aureus was compared for heat-treated antibiotics vs room temperature controls. RESULTS: Peak PMMA temperatures were significantly higher in tibial (115.2°C) vs femoral (85.1°C; P < .001) spacers. In the hottest spacers, temperatures exceeded 100°C for 3 minutes. Simplex PMMA produced significantly higher temperatures (P < .05) compared with Palacos. Vancomycin bioactivity did not change against S aureus with heat exposure. Ceftazidime bioactivity did not change when exposed to femoral temperature profiles and was reduced only 2-fold with tibial profiles. CONCLUSION: The curing temperatures of PMMA in knee spacers are not high enough or maintained long enough to significantly affect the antimicrobial efficacy of ceftazidime, a known "heat-sensitive" antibiotic. Future studies should investigate if more "heat-sensitive" antibiotics could be used clinically in PMMA spacers.

Effects of antiseptic irrigation solutions on osseointegration in a cementless tibial implantation mouse model.

Despite the success of standard antiseptic irrigation solutions in reducing periprosthetic joint infection (PJI) rates, there is still a need for more effective solutions. Synergistic use of povidone-iodine (PI) and hydrogen peroxide (H2O2) has shown promising results; however, the optimal solution concentration balancing bactericidal activity and osseointegration remains unknown. This study aims to evaluate the impact of these antiseptic irrigation solutions on osseointegration and the bone-implant interface strength in vivo. Forty C57BL/6 mice underwent bilateral tibial implantation surgery and were randomly allocated into three groups receiving 0.3% PI, 10% PI mixed with 3% H2O2, or saline as irrigation solutions intraoperatively. Assessments were performed on postoperative Days 1 and 28, including plain radiographs, microcomputed tomography (microCT) evaluation, histological analysis, immunohistochemistry, and biomechanical pull-out testing. No wound complications were observed. MicroCT scans revealed no differences in peri-implant trabecular bone parameters. Biomechanical pull-out testing showed no differences in the bone-implant interface strength across groups. Histological analysis indicated no differences in bone and bone marrow percentage areas among treatment groups. Immunohistochemical analysis demonstrated no differences among groups in peri-implant osteocalcin, osterix, or endomucin-positive cells. In conclusion, using either antiseptic irrigation solution showed no differences in osseointegration parameters compared to the control group, demonstrating safety and the absence of toxicity. CLINICAL RELEVANCE: Dilute 0.3% povidone-iodine and a 1:1 combination of 10% povidone-iodine mixed with 3% hydrogen peroxide can be safely used during primary and revision total joint arthroplasty without compromising osseointegration or causing wound complications.

A translational murine model of aseptic loosening with osseointegration failure.

An in vivo animal model of a weight-bearing intra-articular implant is crucial to the study of implant osseointegration and aseptic loosening caused by osseointegration failure. Osseointegration, defined as a direct structural and functional attachment between living bone tissue and the surface of a load-carrying implant, is essential for implant stability and considered a prerequisite for the long-term clinical success of implants in total joint arthroplasty. Compared to large animal models, murine models offer extensive genetic tools for tracing cell differentiation and proliferation. The 18- to 22-week-old C57BL/6J background mice underwent either press-fitted or loose implantation of a titanium implant, achieving osseointegration or fibrous integration. A protocol was developed for both versions of the procedure, including a description of the relevant anatomy. Samples were subjected to microcomputed tomography and underwent biomechanical testing to access osseointegration. Lastly, samples were fixed and embedded for histological evaluation. The absence of mineralized tissue and weakened maximum pull-out force in loose implantation samples indicated that these implants were less mechanically stable compared to the control at 4 weeks postoperation. Histological analysis demonstrated extensive fibrotic tissue in the peri-implant area of loose implantation samples and excellent implant osseointegration in press-fitted samples at 4 weeks. Both mechanically stable and unstable hemiarthroplasty models with either osseous ingrowth or a robust periprosthetic fibrosis were achieved in mice. We hope that this model can help address current limitations for in vivo study of aseptic loosening and lead to necessary translational benefits.

Emerging ideas: Instability-induced periprosthetic osteolysis is not dependent on the fibrous tissue interface.

BACKGROUND: Stable initial fixation of a total joint arthroplasty implant is critical to avoid the risk of aseptic loosening and premature clinical failure. With implant motion, a fibrous tissue layer forms at the bone-implant interface, leading to implant migration and periprosthetic osteolysis. At the time of implant revision surgery, proresorptive signaling cytokines are expressed in the periimplant fibrous membrane. However, the exact role of this fibrous tissue in causing periprosthetic osteolysis attributable to instability remains unknown. QUESTIONS/HYPOTHESES: We propose an alternative mechanism of periprosthetic osteolysis independent of the fibrous tissue layer, where pressurized fluid flow along the bone-implant interface activates mechanosensitive osteocytes in the periprosthetic bone, causing the release of proresorptive cytokines and subsequent osteoclast differentiation and osteolysis. METHOD OF STUDY: An animal model for instability-induced osteolysis that mimics the periprosthetic bone-implant interface will be used. In this model, a fibrous tissue membrane is allowed to form in the periprosthetic zone, and pressurized fluid flow transmitted through this membrane reliably creates osteolytic lesions in the periprosthetic bone. In this study, half of the rats will have the fibrous tissue present, while the other half will not. We will determine whether the fibrous tissue membrane is essential for the release of proosteoclastic cytokines, leading to osteoclast differentiation and periprosthetic bone loss, by measuring the volume of bone resorption and presence of proresorptive cytokines at the bone-implant interface. SIGNIFICANCE: We will determine whether the fibrous tissue membrane is crucial for osteoclastogenic signaling in the setting of periimplant osteolysis. In the future, this will allow us to test therapeutic interventions, such as specific cytokine inhibitors or alterations in implant design, which may translate into new, clinically relevant strategies to prevent osteolysis.

Changes in leg length and hip offset in navigated imageless vs. conventional total hip arthroplasty.

While previous studies on navigated total hip replacement (nTHA) focused on acetabular component positioning, we compared the results of nTHA with conventional total hip replacement (cTHA) in respect of changes in leg length and hip offset. In a single-center study results radiographic parameters of patients with unilateral THA were included. Data were retrospectively analyzed from computer navigation data and radiographs. Analysis concentrated on the discrepancy in leg length (LLD) and hip offset (OSD) between the affected and unaffected hip. The effect of the procedure was defined as the difference between postoperative and preoperative LLD and OSD values in each group. 2332 patients were analyzed. Both nTHA and cTHA were effective in restoring LLD and OSD by reducing the preoperative value significantly (p < 0.001). Regarding changes in LLD, no statistical difference between nTHA and cTHA could be found. Changes in OSD nTHA was a slightly more effective than cTHA (- 2.06 ± 6.00 mm vs. - 1.50 ± 5.35 mm; p < 0.05). Both navigated and conventional THA were successful in reconstruction of leg length and hip offset, while postoperative offset discrepancy was significantly lower in the navigated group at the cost of longer operation times. If these results are clinically relevant further investigation is needed.

PTH Treatment Increases Cortical Bone Mass More in Response to Compression than Tension in Mice.

Parathyroid hormone (PTH) is an anabolic osteoporosis treatment that increases bone mass and reduces fracture risk. Clinically, the effects of PTH are site-specific, increasing bone mass more at the spine than the hip and not increasing bone mass at the radius. Differences in local loading environment between the spine, hip, and radius may help explain the variation in efficacy, as PTH and mechanical loading have been shown to synergistically increase bone mass. We hypothesized that differences in loading mode might further explain these variations. Owing to the curvature of the mouse tibia, cyclic compression of the hindlimb causes bending at the tibial midshaft, placing the anterior surface under tension and the posterior surface under compression. We investigated the combination of PTH treatment and tibial loading in an osteoblast-specific estrogen receptor-alpha knockout mouse model of low bone mass (pOC-ERαKO) and their littermate controls (LCs) and analyzed bone morphology in the tensile, compressive, and neutral regions of the tibial midshaft. We also hypothesized that pretreating wild-type C57Bl/6J (WT) mice with PTH prior to mechanical loading would enhance the synergistic anabolic effects. Compression was more anabolic than tension, and PTH enhanced the effect of loading, particularly under compression. PTH pretreatment maintained the synergistic anabolic effect for longer durations than concurrent treatment and loading alone. Together these data provide insights into more effective physical therapy and exercise regimens for patients receiving PTH treatment. © 2022 American Society for Bone and Mineral Research (ASBMR).

Effects of teriparatide and loading modality on modeling-based and remodeling-based bone formation in the human femoral neck.

PURPOSE: We have previously shown that a brief course of teriparatide (TPTD) stimulates bone formation in the cancellous and endocortical envelopes of the human femoral neck, and the regions of tension and compression respond differently. The purpose of the present study was to determine how much of the new bone was formed by modeling-based formation (MBF) or remodeling-based formation (RBF). METHODS: We performed a double-blind trial of TPTD vs. placebo (PBO) in patients about to undergo a total hip replacement (THR) for osteoarthritis. Participants were randomized to receive daily TPTD 20 µg or PBO for an average of 6.1 weeks (range 4.1-11.8 weeks) prior to THR. After an average of 3 weeks of study drug, double tetracycline labels were administered per standard protocol. During the THR an intact sample of the mid-femoral neck (FN) was procured; this was fixed, embedded, and sectioned transversely. Histomorphometric analysis was performed in the cancellous, endocortical, and periosteal envelopes. Additionally, separate analyses were performed in the tensile and compressive regions of the endocortical and periosteal envelopes. Sites of new bone formation were identified by the presence of tetracycline labels and designated as MBF if the underlying cement line was smooth and as RBF if it was scalloped. New bone formation on smooth cement lines adjacent to scalloped reversal lines was designated as overflow RBF (oRBF). The referent for all indices was bone surface (BS). RESULTS: In the cancellous and endocortical envelopes, the proportion of mineralizing surface engaged in RBF and oRBF was higher in the TPTD-treated than the PBO-treated subjects. There was also a trend toward higher MBF in TPTD vs. PBO in both envelopes. In linear mixed-effects models, TPTD was predicted to increase formation differently on the tensile and compressive surfaces depending on patient-specific anatomy, including body weight, FN angle, offset, and cortical width and porosity. Eroded surface was not different between groups in either envelope and no significant differences were observed in any parameter in the periosteal envelope. CONCLUSION: We conclude that the predominant early effect of TPTD in the human femoral neck is to stimulate RBF and oRBF with a trend toward an increase in MBF in the endocortical and cancellous envelopes.

Intermittent parathyroid hormone increases stability and improves osseointegration of initially unstable implants.

AIMS: To develop an early implant instability murine model and explore the use of intermittent parathyroid hormone (iPTH) treatment for initially unstable implants. METHODS: 3D-printed titanium implants were inserted into an oversized drill-hole in the tibiae of C57Bl/6 mice (n = 54). After implantation, the mice were randomly divided into three treatment groups (phosphate buffered saline (PBS)-control, iPTH, and delayed iPTH). Radiological analysis, micro-CT (µCT), and biomechanical pull-out testing were performed to assess implant loosening, bone formation, and osseointegration. Peri-implant tissue formation and cellular composition were evaluated by histology. RESULTS: iPTH reduced radiological signs of loosening and led to an increase in peri-implant bone formation over the course of four weeks (timepoints: one week, two weeks, and four weeks). Observational histological analysis shows that iPTH prohibits the progression of fibrosis. Delaying iPTH treatment until after onset of peri-implant fibrosis still resulted in enhanced osseointegration and implant stability. Despite initial instability, iPTH increased the mean pull-out strength of the implant from 8.41 N (SD 8.15) in the PBS-control group to 21.49 N (SD 10.45) and 23.68 N (SD 8.99) in the immediate and delayed iPTH groups, respectively. Immediate and delayed iPTH increased mean peri-implant bone volume fraction (BV/TV) to 0.46 (SD 0.07) and 0.34 (SD 0.10), respectively, compared to PBS-control mean BV/TV of 0.23 (SD 0.03) (PBS-control vs immediate iPTH, p < 0.001; PBS-control vs delayed iPTH, p = 0.048; immediate iPTH vs delayed iPTH, p = 0.111). CONCLUSION: iPTH treatment mediated successful osseointegration and increased bone mechanical strength, despite initial implant instability. Clinically, this suggests that initially unstable implants may be osseointegrated with iPTH treatment. Cite this article: Bone Joint Res 2022;11(5):260-269.

Ceramic-on-ceramic total hip arthroplasty: incidence of instability and noise.

BACKGROUND: Alternative bearing materials in THA have been developed to reduce the incidence of osteolysis. Alumina-on-alumina bearings exhibit extremely low wear rates in vitro, but concerns exist regarding component impingement with the potential for dislocation and the occurrence of noise. QUESTIONS/PURPOSES: We determined generation of squeaking and the relationship between squeaking and component position. METHODS: We prospectively entered 436 alumina-on-alumina, cementless, primary THAs in 364 patients into our institutional database. All procedures were performed with the same surgical technique and the same implant. We obtained Harris Hip scores and a noise questionnaire and assessed radiographic component position and loosening. We determined the difference in abduction angle between squeakers and nonsqueakers. Minimum followup was 2 years (average, 3.5 years; range, 2.0-6.2 years). RESULTS: The mean Harris hip score increased from 51.9 preoperatively to 94.4 at latest followup. Six hips underwent reoperation: four hips (1.1%) for dislocation and two (0.53%) for periprosthetic fracture after trauma. The incidence of noise of any type was 11%, with the most common type of noise being clicking or snapping. Squeaking was reported by 1.9% of patients, with no patient being revised for this phenomenon. We found no association between component position and squeaking. CONCLUSIONS: At average 3 years followup, 98% of ceramic-on-ceramic THAs did not require a revision, with 1.1% of hips having been revised for dislocation. Fewer than 2% of patients reported hearing an audible squeak, with no association found between component position and squeaking. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

A custom coupling device of total knee and ipsilateral total hip arthroplasties after distal femoral fracture.

The treatment of periprosthetic femoral fractures around long-stemmed hip implants is an orthopedic challenge, which may be complicated by the presence or need for a total knee arthroplasty. Treatment of this fracture when the proximal implant is well fixed and a distal implant is required poses ongoing challenges. Traditional plating and allograft struts have produced variable results, particularly in osteoporotic bone, where incidence of nonunion is greater. Thus, we report a custom interlocking device, which couples the stem of the fixed proximal implant to a new stemmed total knee prosthesis, resulting in the expedited restoration of functionality and fracture union.

The lack of correlation between radiographic findings and cartilage integrity.

Total knee arthroplasty is a common treatment of osteoarthritis, although unicompartmental knee arthroplasties are frequently used to retain unaffected compartments. Joint space width (JSW) is a major factor in determining treatment. We examined the relationship between JSW and cartilage quality in 60 patients undergoing total knee arthroplasty to assess its accuracy in representing cartilage degradation. Radiographic JSW was recorded, whereas the unaffected compartment of each tibial plateau was examined postoperatively using Collins, Mankin, and Kellgren and Lawrence scores. No correlation was seen between visual or histologic grading and JSW. Histology more accurately represented cartilage quality, yet it is impractical to obtain preoperatively; thus, JSW is the main mode of assessment. However, using JSW solely to indicate unicompartmental knee arthroplasty may overlook disease in apparently unaffected compartments.

The Role of Electronic Learning in Orthopaedic Graduate Medical Training: A Consensus From Leaders in Orthopaedic Training Programs.

The US orthopaedic graduate medical education system is based on long established methods in education, but academic leaders at orthopaedic institutions now have the ability to use electronic learning innovations. Hospital for Special Surgery gathered graduate medical education leaders from orthopaedic training programs around the country and an electronic learning expert to review current orthopaedic residency and fellowship program practices. This group came to consensus with the following points: (1) current training methods do not take full advantage of available technology/innovations, (2) trainees inappropriately use electronic resources in the absence of or in an underdeveloped formal electronic training program, (3) trainees learn at different rates and in different ways requiring individualized plans for optimal content engagement, and (4) formal electronic learning programs better use time dedicated to educating trainees than informal programs. Orthopaedic graduate medical training programs that adopt these points can establish an electronic learning program to complement their traditional education program by (1) guaranteeing online content is standardized and approved, (2) reducing time spent covering standard lecture material and increasing time spent reviewing cases, and (3) engaging students of all learning backgrounds with content in both asynchronous and synchronous formats.