RESUMEN
Chalcopyrite, galena, and sphalerite commonly coexist with pyrite in sulfidic waste rocks. The aim of this work was to investigate their impact, potentially by galvanic interaction, on pyrite oxidation and acid generation rates under simulated acid and metalliferous drainage conditions. Kinetic leach column experiments using single-minerals and pyrite with one or two of the other sulfide minerals were carried out at realistic sulfide contents (total sulfide <5.2 wt % for mixed sulfide experiments), mimicking sulfidic waste rock conditions. Chalcopyrite was found to be most effective in limiting pyrite oxidation and acid generation with 77-95% reduction in pyrite oxidation over 72 weeks, delaying decrease in leachate pH. Sphalerite had the least impact with reduction of pyrite dissolution by 26% over 72 weeks, likely because of the large band gap and poor conductivity of sphalerite. Galena had a smaller impact than chalcopyrite on pyrite oxidation, despite their similar band gaps, possibly because of the greater extent of oxidation and the significantly reduced surface areas of galena (area reductions of >47% for galena vs <1.5% for chalcopyrite) over 72 weeks. The results are directly relevant to mine waste storage and confirm that the galvanic interaction plays a role in controlling acid generation in multisulfide waste even at low sulfide contents (several wt %) with small probabilities (≤0.23%) of direct contact between sulfide minerals in mixed sulfide experiments.
Asunto(s)
Minerales , Sulfuros , Ácidos , Estrés Oxidativo , SolubilidadRESUMEN
The recrystallization of Mn(III,IV) oxides is catalyzed by aqueous Mn(II) (Mn(II)aq) during (bio)geochemical Mn redox cycling. It is poorly understood how trace metals associated with Mn oxides (e.g., Ni) are cycled during such recrystallization. Here, we use X-ray absorption spectroscopy (XAS) to examine the speciation of Ni associated with Manganite (γ-Mn(III)OOH) suspensions in the presence or absence of Mn(II)aq under variable pH conditions (pH 5.5 and 7.5). In a second set of experiments, we used a 62Ni isotope tracer to quantify the amount of dissolved Ni that exchanges with Ni incorporated in the Manganite crystal structure during reactions in 1 mM Mn(II)aq and in Mn(II)-free solutions. XAS spectra show that Ni is initially sorbed on the Manganite mineral surface and is progressively incorporated into the mineral structure over time (13% after 51 days) even in the absence of dissolved Mn(II). The amount of Ni incorporation significantly increases to about 40% over a period of 51 days when Mn(II)aq is present in solution. Similarly, Mn(II)aq promotes Ni exchange between Ni-substituted Manganite and dissolved Ni(II), with around 30% of Ni exchanged at pH 7.5 over the duration of the experiment. No new mineral phases are detected following recrystallization as determined by X-ray diffraction and XAS. Our results reveal that Mn(II)-catalyzed mineral recrystallization partitions Ni between Mn oxides and aqueous fluids and can therefore affect Ni speciation and mobility in the environment.
Asunto(s)
Oligoelementos , Compuestos de Manganeso , Oxidación-Reducción , ÓxidosRESUMEN
The bacterium Cupriavidus metallidurans can reduce toxic gold(I/III) complexes and biomineralize them into metallic gold (Au) nanoparticles, thereby mediating the (trans)formation of Au nuggets. In Au-rich soils, most transition metals do not interfere with the resistance of this bacterium to toxic mobile Au complexes and can be removed from the cell by plasmid-encoded metal efflux systems. Copper is a noticeable exception: the presence of Au complexes and Cu ions results in synergistic toxicity, which is accompanied by an increased cytoplasmic Cu content and formation of Au nanoparticles in the periplasm. The periplasmic Cu-oxidase CopA was not essential for formation of the periplasmic Au nanoparticles. As shown with the purified and reconstituted Cu efflux system CupA, Au complexes block Cu-dependent release of phosphate from ATP by CupA, indicating inhibition of Cu transport. Moreover, Cu resistance of Au-inhibited cells was similar to that of mutants carrying deletions in the genes for the Cu-exporting PIB1-type ATPases. Consequently, Au complexes inhibit export of cytoplasmic Cu ions, leading to an increased cellular Cu content and decreased Cu and Au resistance. Uncovering the biochemical mechanisms of synergistic Au and Cu toxicity in C. metallidurans explains the issues this bacterium has to face in auriferous environments, where it is an important contributor to the environmental Au cycle.IMPORTANCEC. metallidurans lives in metal-rich environments, including auriferous soils that contain a mixture of toxic transition metal cations. We demonstrate here that copper ions and gold complexes exert synergistic toxicity because gold ions inhibit the copper-exporting P-type ATPase CupA, which is central to copper resistance in this bacterium. Such a situation should occur in soils overlying Au deposits, in which Cu/Au ratios usually are â«1. Appreciating how C. metallidurans solves the problem of living in environments that contain both Au and Cu is a prerequisite to understand the molecular mechanisms underlying gold cycling in the environment, and the significance and opportunities of microbiota for specific targeting to Au in mineral exploration and ore processing.
Asunto(s)
Cobre/toxicidad , Cupriavidus/efectos de los fármacos , Compuestos de Oro/toxicidad , Iones/toxicidad , Nanopartículas del Metal/toxicidad , Suelo/química , Microbiología del SueloRESUMEN
Understanding the form in which gold is transported in surface- and groundwaters underpins our understanding of gold dispersion and (bio)geochemical cycling. Yet, to date, there are no direct techniques capable of identifying the oxidation state and complexation of gold in natural waters. We present a reversed phase ion-pairing HPLC-ICP-MS method for the separation and determination of aqueous gold(III)-chloro-hydroxyl, gold(III)-bromo-hydroxyl, gold(I)-thiosulfate, and gold(I)-cyanide complexes. Detection limits for the gold species range from 0.05 to 0.30 µg L(-1). The [Au(CN)2](-) gold cyanide complex was detected in five of six waters from tailings and adjacent monitoring bores of working gold mines. Contrary to thermodynamic predictions, evidence was obtained for the existence of Au(III)-complexes in circumneutral, hypersaline waters of a natural lake overlying a gold deposit in Western Australia. This first direct evidence for the existence and stability of Au(III)-complexes in natural surface waters suggests that Au(III)-complexes may be important for the transport and biogeochemical cycling of gold in surface environments. Overall, these results show that near-µg L(-1) enrichments of Au in environmental waters result from metastable ligands (e.g., CN(-)) as well as kinetically controlled redox processes leading to the stability of highly soluble Au(III)-complexes.
Asunto(s)
Cromatografía Líquida de Alta Presión/métodos , Oro/análisis , Espectrofotometría Atómica/métodos , Agua/química , Cianatos/análisis , Hidrólisis , Lagos/química , Ligandos , Termodinámica , Factores de Tiempo , Australia OccidentalRESUMEN
Microorganisms inhabiting uranium (U)-rich environments have specific physiological and biochemical coping mechanisms to deal with U toxicity, and thereby play a crucial role in the U biogeochemical cycling as well as associated heavy metals. We investigated the diversity and functional capabilities of indigenous bacterial communities inhabiting historic U- and Rare-Earth-Elements-rich polymetallic tailings from the Mount Painter Inlier, Northern Flinders Ranges, South Australia. Bacterial diversity profiling identified Actinobacteria as the predominant phylum in all samples. GeoChip analyses revealed the presence of diverse functional genes associated with biogenic element cycling, metal homeostasis/resistance, stress response, and secondary metabolism. The high abundance of metal-resistance and stress-tolerance genes indicates the adaptation of bacterial communities to the "harsh" environmental (metal-rich and semi-arid) conditions of the Northern Flinders Ranges. Additionally, a viable bacterial consortium was enriched from polymetallic tailings. Laboratory experiments demonstrated that the consortium scrubbed uranyl from solution by precipitating a uranyl phosphate biomineral (chernikovite), thus contributing to U biogeochemical cycling. These specialised microbial communities reflect the high specificity of the mineralogy/geochemistry, and biogeography of these U-rich settings. This study provides the fundamental knowledge to develop future applications in securing long-term stability of polymetallic mine waste, and for reprocessing this "waste" to further extract critical minerals.
Asunto(s)
Microbiota , Uranio , Uranio/metabolismo , Bacterias/metabolismoRESUMEN
A plutonium-rich carbide, (U,Pu)(Al,Fe)3C3, was discovered in a hot particle from the Maralinga nuclear testing site in South Australia. The particle was produced between 1960 and 1963 and has been exposed to ambient conditions since then. The new phase belongs to a group of ternary carbides known as 'derivative-MAX phases'. It formed at high temperature within an explosion cloud via rapid eutectic crystallisation from a complex Al-Fe-U-Pu-C-O melt, and is the major Pu host in this particle. Despite signs of volume expansion due to radiation damage, (U,Pu)(Al,Fe)3C3 remains highly X-ray crystalline 60 years after its formation, with no evidence of Pu leaching from the crystals. Our results highlight that the high-energy conditions of (sub-)critical explosions can create unexpected species. Even micro-particles of a derivative-MAX phase can effectively retain low-valence (metallic-like character) Pu under environmental conditions; the slow physical and chemical weathering of these particles may contribute to the slow release of radionuclides over decades, explaining constant low-levels of radionuclides observed in fauna. This study further suggests that rapidly quenched eutectic melts may be engineered to stabilise actinides in nuclear waste products, removing the need for hydrometallurgical processing.
RESUMEN
Specialised microbial communities colonise the surface of gold particles in soils/sediments, and catalyse gold dissolution and re-precipitation, thereby contributing to the environmental mobility and toxicity of this 'inert' precious metal. We assessed the proteomic and physiological response of Serratia proteamaculans, the first metabolically active bacterium enriched and isolated directly from natural gold particles, when exposed to toxic levels of soluble Au3+ (10 µM). The results were compared to a metal-free blank, and to cultures exposed to similarly toxic levels of soluble Cu2+ (0.1 mM); Cu was chosen for comparison because it is closely associated with Au in nature due to similar geochemical properties. A total of 273 proteins were detected from the cells that experienced the oxidative effects of soluble Au, of which 139 (51%) were upregulated with either sole expression (31%) or had synthesis levels greater than the Au-free control (20%). The majority (54%) of upregulated proteins were functionally different from up-regulated proteins in the bacteria-copper treatment. These proteins were related to broad functions involving metabolism and biogenesis, followed by cellular process and signalling, indicating significant specificity for Au. This proteomic study revealed that the bacterium upregulates the synthesis of various proteins related to oxidative stress response (e.g., Monothiol-Glutaredoxin, Thiol Peroxidase, etc.) and cellular damage repair, which leads to the formation of metallic gold nanoparticles less toxic than ionic gold. Therefore, indigenous bacteria may mediate the toxicity of Au through two different yet simultaneous processes: i) repairing cellular components by replenishing damaged proteins and ii) neutralising reactive oxygen species (ROS) by up-regulating the synthesis of antioxidants. By connecting the fields of molecular bacteriology and environmental biogeochemistry, this study is the first step towards the development of biotechnologies based on indigenous bacteria applied to gold bio-recovery and bioremediation of contaminated environments.
Asunto(s)
Oro , Nanopartículas del Metal , Oro/toxicidad , Oro/química , Cobre/toxicidad , Proteómica , Nanopartículas del Metal/toxicidad , Nanopartículas del Metal/química , BacteriasRESUMEN
The structure of the uranyl aqua ion (UO22+) and a number of its inorganic complexes (specifically, UO2Cl+, UO2Cl20, UO2SO40, [Formula: see text] , [Formula: see text] and UO2OH42-) have been characterised using X-Ray absorption spectroscopy/extended X-Ray absorption fine structure (XAS/EXAFS) at temperatures ranging from 25 to 326 ºC. Results of ab initio molecular dynamics (MD) calculations are also reported for uranyl in chloride and sulfate-bearing fluids from 25 to 400 ºC and 600 bar to 20 kilobar (kb). These results are reported alongside a comprehensive review of prior structural characterisation work with particular focus given to EXAFS works to provide a consistent and up-to-date view of the structure of these complexes under conditions relevant to U mobility in ore-forming systems and around high-grade nuclear waste repositories. Regarding reported EXAFS results, average equatorial coordination was found to decrease in uranyl and its sulfate and chloride complexes as temperature rose - the extent of this decrease differed between species and solution compositions but typically resulted in an equatorial coordination number of â¼3-4 at temperatures above 200 ºC. The [Formula: see text] complex was observed at temperatures from 25 to 247 ºC and exhibited no major structural changes over this temperature range. UO2OH42- exhibited only minor structural changes over a temperature range from 88 to 326 ºC and was suggested to manifest fivefold coordination with four hydroxyl molecules and one water molecule around its equator. Average coordination values derived from fits of the reported EXAFS data were compared to average coordination values calculated using the experimentally derived thermodynamic data for chloride complexes reported by Dargent et al. (2013) and Migdisov et al. (2018b), and for sulfate complexes reported by Alcorn et al. (2019) and Kalintsev et al. (2019). Sulfate EXAFS data were well described by available thermodynamic data, and chloride EXAFS data were described well by the thermodynamic data of Migdisov et al. (2018b), but not by the data of Dargent et al. (2013). The ab initio molecular dynamics calculations confirmed the trends in equatorial coordination observed with EXAFS and were also able to provide an insight into the effect of pressure in equatorial water coordination - for a given temperature, higher pressures appear to lead to a greater number of equatorially bound waters counteracting the temperature effect.
RESUMEN
Three new metal-coordinating ligands, L(1)·4HCl [1-(2-guanidinoethyl)-1,4,7-triazacyclononane tetrahydrochloride], L(2)·4HCl [1-(3-guanidinopropyl)-1,4,7-triazacyclononane tetrahydrochloride], and L(3)·4HCl [1-(4-guanidinobutyl)-1,4,7-triazacyclononane tetrahydrochloride], have been prepared via the selective N-functionalization of 1,4,7-triazacyclononane (tacn) with ethylguanidine, propylguanidine, and butylguanidine pendants, respectively. Reaction of L(1)·4HCl with Cu(ClO(4))(2)·6H(2)O in basic aqueous solution led to the crystallization of a monohydroxo-bridged binuclear copper(II) complex, [Cu(2)L(1)(2)(µ-OH)](ClO(4))(3)·H(2)O (C1), while for L(2) and L(3), mononuclear complexes of composition [Cu(L(2)H)Cl(2)]Cl·(MeOH)(0.5)·(H(2)O)(0.5) (C2) and [Cu(L(3)H)Cl(2)]Cl·(DMF)(0.5)·(H(2)O)(0.5) (C3) were crystallized from methanol and DMF solutions, respectively. X-ray crystallography revealed that in addition to a tacn ring from L(1) ligand, each copper(II) center in C1 is coordinated to a neutral guanidine pendant. In contrast, the guanidinium pendants in C2 and C3 are protonated and extend away from the Cu(II)-tacn units. Complex C1 features a single µ-hydroxo bridge between the two copper(II) centers, which mediates strong antiferromagnetic coupling between the metal centers. Complexes C2 and C3 cleave two model phosphodiesters, bis(p-nitrophenyl)phosphate (BNPP) and 2-hydroxypropyl-p-nitrophenylphosphate (HPNPP), more rapidly than C1, which displays similar reactivity to [Cu(tacn)(OH(2))(2)](2+). All three complexes cleave supercoiled plasmid DNA (pBR 322) at significantly faster rates than the corresponding bis(alkylguanidine) complexes and [Cu(tacn)(OH(2))(2)](2+). The high DNA cleavage rate for C1 {k(obs) = 1.30 (±0.01) × 10(-4) s(-1) vs 1.23 (±0.37) × 10(-5) s(-1) for [Cu(tacn)(OH(2))(2)](2+) and 1.58 (±0.05) × 10(-5) s(-1) for the corresponding bis(ethylguanidine) analogue} indicates that the coordinated guanidine group in C1 may be displaced to allow for substrate binding/activation. Comparison of the phosphate ester cleavage properties of complexes C1-C3 with those of related complexes suggests some degree of cooperativity between the Cu(II) centers and the guanidinium groups.
Asunto(s)
Cobre/química , División del ADN , Compuestos Heterocíclicos/química , Compuestos Organometálicos/química , Organofosfatos/química , Cristalografía por Rayos X , Guanidina/química , Enlace de Hidrógeno , Ligandos , Fenómenos Magnéticos , Estructura Molecular , Nitrofenoles/químicaRESUMEN
While the role of microorganisms as main drivers of metal mobility and mineral formation under Earth surface conditions is now widely accepted, the formation of secondary gold (Au) is commonly attributed to abiotic processes. Here we report that the biomineralization of Au nanoparticles in the metallophillic bacterium Cupriavidus metallidurans CH34 is the result of Au-regulated gene expression leading to the energy-dependent reductive precipitation of toxic Au(III)-complexes. C. metallidurans, which forms biofilms on Au grains, rapidly accumulates Au(III)-complexes from solution. Bulk and microbeam synchrotron X-ray analyses revealed that cellular Au accumulation is coupled to the formation of Au(I)-S complexes. This process promotes Au toxicity and C. metallidurans reacts by inducing oxidative stress and metal resistances gene clusters (including a Au-specific operon) to promote cellular defense. As a result, Au detoxification is mediated by a combination of efflux, reduction, and possibly methylation of Au-complexes, leading to the formation of Au(I)-C-compounds and nanoparticulate Au(0). Similar particles were observed in bacterial biofilms on Au grains, suggesting that bacteria actively contribute to the formation of Au grains in surface environments. The recognition of specific genetic responses to Au opens the way for the development of bioexploration and bioprocessing tools.
Asunto(s)
Cupriavidus/metabolismo , Oro/farmacocinética , Nanopartículas del Metal/química , Biopelículas/crecimiento & desarrollo , Cupriavidus/efectos de los fármacos , Cupriavidus/genética , Cupriavidus/ultraestructura , Farmacorresistencia Bacteriana/genética , Contaminantes Ambientales/farmacocinética , Contaminantes Ambientales/toxicidad , Genes Bacterianos , Oro/toxicidad , Cinética , Nanopartículas del Metal/toxicidad , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Minerales/farmacocinética , Minerales/toxicidad , Familia de MultigenesRESUMEN
Rare earth elements (REE), essential metals for the transition to a zero-emission economy, are mostly extracted from REE-fluorcarbonate minerals in deposits associated with carbonatitic and/or peralkaline magmatism. While the role of high-temperature fluids (100 < T < 500 °C) in the development of economic concentrations of REE is well-established, the mechanisms of element transport, ore precipitation, and light (L)REE/heavy (H)REE fractionation remain a matter of debate. Here, we provide direct evidence from in-situ X-ray Absorption Spectroscopy (XAS) that the formation of hydroxyl-carbonate complexes in alkaline fluids enhances hydrothermal mobilization of LREE at T ≥ 400 °C and HREE at T ≤ 200 °C, even in the presence of fluorine. These results not only reveal that the modes of REE transport in alkaline fluids differ fundamentally from those in acidic fluids, but further underline that alkaline fluids may be key to the mineralization of hydrothermal REE-fluorcarbonates by promoting the simultaneous transport of (L)REE, fluoride and carbonate, especially in carbonatitic systems.
RESUMEN
Leaching and transport of contaminants is a complex interacting system affected by a suite of environmental factors. This study demonstrates the potential significance of weather events and moisture movement when interpreting plutonium (Pu) migration and advective transport in the soil matrix. Using a column transport experiment, two soil types, a sandy soil and clay-rich soil, were spiked with 238Pu as a tracer to observe the effect of simulated tropical and arid rainfall events on Pu mobility. Partition coefficients (Kd) were determined over a period of weeks and under varying rainfall rates to establish the impact of changing weather events on Pu mobility. The variability of these temporal Kds covers six orders of magnitude over a relatively brief time period. This demonstrates the necessity for non-static Kds to accurately describe Pu transport in these systems. The Pu Kds determined by these column transport experiments fall within the bounds of anticipated values (approximately 80-300,000 mL g-1) from immobile (magnitude 106 mL g-1) to moderately mobile (magnitude 101 mL g-1). The overall transport rate, shown by a decrease in calculated Kd, increases in environments where rainfall is more episodic, such as in arid regions as opposed to the consistently abundant rainfall in tropical regions. In contrast to the 238Pu spike, 239+240Pu resulting from contamination from nuclear tests in the sandy soil (aged for >30 years) showed higher mobility; we hypothesise that the ageing of the contamination, in particular Pu-bearing particles, accounts for this significant increase in Pu mobility. Low intensity, high frequency events in tropical sandy soil systems containing Pu particle contamination have the potential to mobilise Pu (>105 decrease in calculated Kd) over shorter periods of weeks, and not years as previously assumed. This increased mobility, when applied to radioecological models using Kd as a site-specific parameter, shows that there is likely to be a continued impact (risk quotient >1) on non-human biota in tropical sandy soil ecosystems.
Asunto(s)
Plutonio , Monitoreo de Radiación , Contaminantes Radiactivos del Suelo , Ecosistema , Plutonio/análisis , Monitoreo de Radiación/métodos , Suelo , Contaminantes Radiactivos del Suelo/análisisRESUMEN
Two new ligands, L(1) and L(2), have been prepared via N-functionalization of 1,4,7-triazacyclononane (tacn) with pairs of ethyl- or propyl-guanidine pendants, respectively. The X-ray crystal structure of [CuL(1)](ClO4)2 (C1) isolated from basic solution (pH 9) indicates that a secondary amine nitrogen from each guanidine pendants coordinates to the copper(II) center in addition to the nitrogen atoms in the tacn macrocycle, resulting in a five-coordinate complex with intermediate square-pyramidal/trigonal bipyramidal geometry. The guanidines adopt an unusual coordination mode in that their amine nitrogen nearest to the tacn macrocycle binds to the copper(II) center, forming very stable five-membered chelate rings. A spectrophotometric pH titration established the pK(app) for the deprotonation and coordination of each guanidine group to be 3.98 and 5.72, and revealed that [CuL(1)](2+) is the only detectable species present in solution above pH â¼ 8. The solution speciation of the CuL(2) complex (C2) is more complex, with at least 5 deprotonation steps over the pH range 4-12.5, and mononuclear and binuclear complexes coexisting. Analysis of the spectrophotometric data provided apparent deprotonation constants, and suggests that solutions at pH â¼ 7.5 contain the maximum proportion of polynuclear complexes. Complex C1 exhibits virtually no cleavage activity toward the model phosphate diesters, bis(p-nitrophenyl)phosphate (BNPP) and 2-hydroxypropyl-p-nitrophenyl phosphate (HPNPP), while C2 exhibits moderate activity. For C2, the respective kobs values measured at pH 7.0 (7.24 (± 0.08) × 10(-5) s(-1) (BNPP at 50 °C) and 3.2 (± 0.3) × 10(-5) s(-1) (HPNPP at 25 °C)) are 40- and 10-times faster than [Cu(tacn)(OH2)2](2+) complex. Both complexes cleave supercoiled pBR 322 plasmid DNA, indicating that the guanidine pendants of [CuL(1)](2+) may have been displaced from the copper coordination sphere to allow for DNA binding and subsequent cleavage. The rate of DNA cleavage by C2 is twice that measured for [Cu(tacn)(OH2)2](2+), suggesting some degree of cooperativity between the copper center and guanidinium pendants in the hydrolysis of the phosphate ester linkages of DNA. A predominantly hydrolytic cleavage mechanism was confirmed through experiments performed either in the presence of various radical scavengers or under anaerobic conditions.
Asunto(s)
Cobre/química , División del ADN/efectos de los fármacos , Guanidina/química , Compuestos Heterocíclicos/química , Anaerobiosis , Cristalografía por Rayos X , Ésteres/química , Depuradores de Radicales Libres/química , Compuestos Heterocíclicos/farmacología , Enlace de Hidrógeno , Concentración de Iones de Hidrógeno , Indicadores y Reactivos , Cinética , Ligandos , Nitrofenoles/química , Fosfatos/química , Plásmidos/química , Especies Reactivas de Oxígeno/química , Soluciones , Espectrofotometría Ultravioleta , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
The dynamic evolutions of fluid-mineral systems driving large-scale geochemical transformations in the Earth's crust remain poorly understood. We observed experimentally that successive sodic and potassic alterations of feldspar can occur via a single self-evolved, originally Na-only, hydrothermal fluid. At 600 °C, 2 kbar, sanidine ((K,Na)AlSi3O8) reacted rapidly with a NaCl fluid to form albite (NaAlSi3O8); over time, some of this albite was replaced by K-feldspar (KAlSi3O8), in contrast to predictions from equilibrium reaction modelling. Fluorine accelerated the process, resulting in near-complete back-replacement of albite within 1 day. These findings reveal that potassic alteration can be triggered by Na-rich fluids, indicating that pervasive sequential sodic and potassic alterations associated with mineralization in some of the world's largest ore deposits may not necessarily reflect externally-driven changes in fluid alkali contents. Here, we show that these reactions are promoted at the micro-scale by a self-evolving, kinetically-driven process; such positive feedbacks between equilibrium and kinetic factors may be essential in driving pervasive mineral transformations.
RESUMEN
Anthropogenic activities can redistribute the constituents of naturally occurring radioactive materials (NORM), posing potential hazards to populations and ecosystems. In the present study, the co-sorption of several RN from the U decay chain- 238U, 230Th, 226Ra, 210Pb and 210Po, onto common minerals associated with mining activities (chalcopyrite, bornite, pyrite and barite) was investigated, in order to identify the various factors that control long-term NORM mobility and retentivity in environmental acid-mine drainage systems and hydrometallurgical processing. The results show selective RN co-sorption to the various natural minerals, suggesting that mineral-specific mechanisms govern the variability in NORM mobility and retentivity. Both 226Ra and 210Po underwent significant sorption onto the natural minerals investigated in this study. The order of co-sorption in sulfate media for chalcopyrite and bornite was 210Po>226Ra>206Pb>210Pb>238U/230Th. Conversely, both pyrite and barite showed increased affinity for 226Ra; the order of co-sorption in sulfate media was 226Ra>210Po>206Pb/210Pb>238U/230Th for pyrite and 226Ra>206Pb/210Pb>230Th/238U/210Po for barite. Similar orders of co-sorption were observed in the nitrate media: for chalcopyrite and bornite the order was 210Po>226Ra/206Pb/210Pb/238U/230Th compared to 226Ra>210Po/206Pb/210Pb/238U/230Th for pyrite and barite. The behavior of 210Po was found to the anomalous: in both sulfate and nitrate solutions, 210Po had little affinity for barite compared to the sulfides. Thermodynamic modeling indicated the formation of a reduced PoS(s) phase at the surface of sulfide minerals, leading to the suggestion that 210Po likely undergoes reductive precipitation on the surface of sulfide minerals. The high sorption of both 206Pb and 210Pb observed in the sulfate systems were likely as a result of co-precipitation as insoluble anglesite compared to nitrate where they mainly remained in solution. Overall, barite showed the highest affinity for 226Ra, given its propensity to sorb 226Ra (similar ionic size). Both 238U and 230Th were highly mobile in acidic sulfate and nitrate solutions. The results highlighted here identify the various constraints on the natural variability and fractionation of NORM in the environment, as well as the mineral-specific mechanisms that control co-sorption of RN. This information provides a framework for predicting RN transport within soils and ground waters with variable geochemical conditions and in metallurgical extraction processes, in order to develop effective strategies towards NORM mitigation.
RESUMEN
Reaction-induced porosity is a key factor enabling protracted fluid-rock interactions in the Earth's crust, promoting large-scale mineralogical changes during diagenesis, metamorphism, and ore formation. Here, we show experimentally that the presence of trace amounts of dissolved cerium increases the porosity of hematite (Fe2O3) formed via fluid-induced, redox-independent replacement of magnetite (Fe3O4), thereby increasing the efficiency of coupled magnetite replacement, fluid flow, and element mass transfer. Cerium acts as a catalyst affecting the nucleation and growth of hematite by modifying the Fe2+(aq)/Fe3+(aq) ratio at the reaction interface. Our results demonstrate that trace elements can enhance fluid-mediated mineral replacement reactions, ultimately controlling the kinetics, texture, and composition of fluid-mineral systems. Applied to some of the world's most valuable orebodies, these results provide new insights into how early formation of extensive magnetite alteration may have preconditioned these ore systems for later enhanced metal accumulation, contributing to their sizes and metal endowment.
RESUMEN
We explore the role of various solution environments - chloride brines, acid mine drainage (sulfate) and groundwater (carbonate), as well as pore pressure in producing secular disequilibrium among the various radionuclides (RN) in the U-decay series upon leaching of uraninite - the most abundant U-ore and a widespread accessory mineral in U-rich rocks. We observed that the end products of the U-decay chain, 206Pb and 207Pb, exist primarily at the surface/edges of grains or within large pores in the uraninite. In contrast, the intermediate daughters 226Ra, 210Pb, 210Po, and 234/230Th, exist primarily within the bulk of uraninite, requiring breakdown by leaching for subsequent mobility to occur. Overall, pore pressure had little effect on RN mobility, with solution environment being the primary factor in creating significant mobility and disequilibrium among the RN, as it drives the initial breakdown of uraninite and influences the subsequent differential solubility of individual RNs. This was particularly the case for carbonate-bearing fluids, leading to significant fractionation of the various daughter RN arising from variable complexation and sorption phenomena. Understanding the geochemical behaviour of the RN in the U-decay series is important for predicting and managing the risks associated with RN in both environmental (acid-mine drainage) and engineered (metallurgical extraction) processes. Effective modelling of long-term RN behaviour should incorporate this strong relative fractionation caused by contrasting geochemical behaviour of individual RN during and after their release into the water from uraninite and subsequent interaction with the surrounding aquifer host rocks.
RESUMEN
Quantitative understanding of uranium transport by high temperature fluids is crucial for confident assessment of its migration in a number of natural and artificially induced contexts, such as hydrothermal uranium ore deposits and nuclear waste stored in geological repositories. An additional recent and atypical context would be the seawater inundated fuel of the Fukushima Daiichi Nuclear Power Plant. Given its wide applicability, understanding uranium transport will be useful regardless of whether nuclear power finds increased or decreased adoption in the future. The amount of uranium that can be carried by geofluids is enhanced by the formation of complexes with inorganic ligands. Carbonate has long been touted as a critical transporting ligand for uranium in both ore deposit and waste repository contexts. However, this paradigm has only been supported by experiments conducted at ambient conditions. We have experimentally evaluated the ability of carbonate-bearing fluids to dissolve (and therefore transport) uranium at high temperature, and discovered that in fact, at temperatures above 100 °C, carbonate becomes almost completely irrelevant as a transporting ligand. This demands a re-evaluation of a number of hydrothermal uranium transport models, as carbonate can no longer be considered key to the formation of uranium ore deposits or as an enabler of uranium transport from nuclear waste repositories at elevated temperatures.
RESUMEN
Knowledge of the behavior of technologically enhanced naturally occurring radioactive materials derived through the decay of U and its daughter products, and their subsequent fractionation, mobilization and retention, is essential to develop effective mitigation strategies and long-term radiological risk prediction. In the present study, multiple state-of-the-art, spatially resolved micro-analytical characterization techniques were combined to systematically track the liberation and migration of radionuclides (RN) from U-bearing phases in an Olympic Dam Cu flotation concentrate following sulfuric-acid-leach processing. The results highlighted the progressive dissolution of U-bearing minerals (mainly uraninite) leading to the release, disequilibrium and ultimately upgrade of daughter RN from the parent U. This occurred in conjunction with primary Cu-Fe-sulfide minerals undergoing coupled-dissolution reprecipitation to the porous secondary Cu-mineral, covellite. The budget of RN remaining in the leached concentrate was split between RN still hosted in the original U-bearing minerals, and RN that were mobilized and subsequently sorbed/precipitated onto porous covellite and auxiliary gangue mineral phases (e.g. barite). Further grinding of the flotation concentrate prior to sulfuric-acid-leach led to dissolution of U-bearing minerals previously encapsulated within Cu-Fe-sulfide minerals, resulting in increased release and disequilibrium of daughter RN, and causing further RN upgrade. The various processes that affect RN (mobility, sorption, precipitation) and sulfide minerals (coupled-dissolution reprecipitation and associated porosity generation) occur continuously within the hydrometallurgical circuit, and their interplay controls the rapid and highly localized enrichment of RN. The innovative combination of tools developed here reveal the heterogeneous distribution and fractionation of the RN in the ores following hydrometallurgical treatment at nm to cm-scales in exquisite detail. This approach provides an effective blueprint for understanding of the mobility and retention of U and its daughter products in complex anthropogenic and natural processes in the mining and energy industries.
RESUMEN
Replacement reactions ('pseudomorphism') commonly occur in Nature under a large range of conditions (T 25 to >600 degrees C; P 1 to >5 kbar). Whilst mineral replacement reactions are often assumed to proceed by solid-state diffusion of the metal ions through the mineral, many actually proceed via a coupled dissolution and reprecipitation (CDR) mechanism. In such cases, a starting mineral is dissolved into a fluid and this dissolution is coupled with the precipitation of a replacement phase across the reaction front. In cases where there are close relationships between the crystal structures of the parent and newly formed minerals, the replacement can be topotactic (interface-coupled dissolution and reprecipitation). The kinetics and chemistry of the CDR route are fundamentally different from solid-state diffusion and can be exploited i) for the synthesis of materials that are often difficult to synthesise via traditional methods and ii) to obtain materials with unique properties. This review highlights recent research into the use of CDR for such synthetic challenges. Emphasis has been given to i) the use of CDR to synthesise compounds with relatively low thermal stability such as the thiospinel mineral violarite ((Ni,Fe)(3)S(4)), ii) preliminary work into use of CDR for the production of roquesite (CulnS(2)), a potentially important photovoltaic component and, iii) examples where the textures resulting from CDR reactions are controlled by the nature and texture of the parent phase and the reaction conditions; these being the formation of micro-porous gold and three-dimensional ordered arrays of nanozeolite of uniform size and crystallographic orientation.