Level-line moirés by superposition of cylindrical microlens gratings.

Two superposed layers of transparent cylindrical lenslet gratings create classical moiré fringes when illuminated from behind. We rely on this observation to conceive special devices made of superposed lenslet gratings that produce compelling beating shapes when tilted against the light. Level-line moirés are created by superposing gratings of cylindrical lenslets of the same period on both sides of a substrate and by locally shifting some of the cylindrical lenses according to the moiré theory. Depending on the illumination and the viewing conditions, constant light intensities or colors move across graphical elements or faces. Such level-line moiré samples have been fabricated and characterized to determine the optimal fabrication parameters. Thanks to their striking visual appeal and their relatively challenging fabrication, moirés created by superposition of lenslets have a high potential for document security, art, and decoration.

1D moiré shapes by superposed layers of micro-lenses.

Two superposed layers of transparent cylindrical lenslet gratings create classical moiré fringes, when illuminated from behind. We rely on this observation to conceive special devices made of superposed lenslet gratings that produce animated moirés when they are tilted against the light. One-dimensional moirés can show a message moving back and forth along a given direction or radially expanding towards the exterior of a disk. These 1D moirés are conceived by fabricating two layers of micro-lenses on both sides of a transparent substrate. The top layer is a rectilinear grating of cylindrical lenslets and the bottom layer is an arrangement of smaller lenslets of different sizes and orientations that create a high contrast. Moirés created by superpositions of lenslets are visually striking and can be challenging to fabricate. Therefore they have a high potential for art, decoration, and document security.

Nanostructured surface topographies have an effect on bactericidal activity.

BACKGROUND: Due to the increased emergence of antimicrobial resistance, alternatives to minimize the usage of antibiotics become attractive solutions. Biophysical manipulation of material surface topography to prevent bacterial adhesion is one promising approach. To this end, it is essential to understand the relationship between surface topographical features and bactericidal properties in order to develop antibacterial surfaces. RESULTS: In this work a systematic study of topographical effects on bactericidal activity of nanostructured surfaces is presented. Nanostructured Ormostamp polymer surfaces are fabricated by nano-replication technology using nanoporous templates resulting in 80-nm diameter nanopillars. Six Ormostamp surfaces with nanopillar arrays of various nanopillar densities and heights are obtained by modifying the nanoporous template. The surface roughness ranges from 3.1 to 39.1 nm for the different pillar area parameters. A Gram-positive bacterium, Staphylococcus aureus, is used as the model bacterial strain. An average pillar density at ~ 40 pillars µm-2 with surface roughness of 39.1 nm possesses the highest bactericidal efficiency being close to 100% compared with 20% of the flat control samples. High density structures at ~ 70 pillars µm-2 and low density structures at < 20 pillars µm-2 with surface roughness smaller than 20 nm reduce the bactericidal efficiency to almost the level of the control samples. CONCLUSION: The results obtained here suggests that the topographical effects including pillar density and pillar height inhomogeneity may have significant impacts on adhering pattern and stretching degree of bacterial cell membrane. A biophysical model is prepared to interpret the morphological changes of bacteria on these nanostructures.

Bi-directional ACET micropump for on-chip biological applications.

The ability to control and pump high ionic strength fluids inside microchannels forms a major advantage for clinical diagnostics and drug screening processes, where high conductive biological and physiological buffers are used. Despite the known potential of AC electro-thermal (ACET) effect in different biomedical applications, comparatively little is known about controlling the velocity and direction of fluid inside the chip. Here, we proposed to discretize the conventional electrodes to form various asymmetric electrode structures in order to control the fluid direction by simple switching the appropriate electric potential applied to the discretized electrodes. The ACET pumping effect was numerically studied by solving electrical, thermal and hydrodynamic multi-physic coupled equations to optimize the geometrical dimensions of the discretized system. PBS solutions with different ionic strength were seeded with 1 µm sized fluorescent particles and electrothermally driven fluid motion was observed inside the channel for different electrode structures. Experimental analyses confirm that the proposed micropump is efficient for a conductivity range between 0.1 and 1 S/m and the efficiency improves by increasing the voltage amplitude. Behavior of the proposed electrode-electrolyte system is discussed by lumped circuit model. Frequency response of system illustrated that the optimal frequency range increases by increasing the conductivity of medium. For 0.18 S/m PBS solution, the constant pumping effect was observed at frequency range between 100 kHz and 1 MHz, while frequency range of 100 kHz to 5 MHZ was observed for 0.42 S/m. The characteristics of experimental results were in good agreement with the theoretical model.

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites.

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, and inherent selectivity toward VOCs. However, such sensors have a slow response time as the polymer matrix often has a glass transition temperature (Tg) higher than the sensor operating temperature slowing the analyte diffusion to/from the polymer. A plasticizer lowers polymer Tg to match the sensor operation temperature, reducing its response time. In this study, the effect of a plasticizer diethylene glycol dibenzoate (DEGDB) on the sensing properties of polystyrene (PS)-carbon black (CB) composite is investigated to obtain sensors with a fast response time and high sensitivity to VOCs. The sensors are fabricated via drop-on-demand inkjet printing, providing a high degree of control over the sensory film morphology and reproducibility. A design-of-experiment (DoE) approach is adopted to find the optimum ink and print parameters with a minimum number of experiments. As a result, sensors with 30 times faster response time and 25 times higher effective sensitivity are obtained while operating near room temperature (27 °C). Furthermore, the sensors show high sensitivity toward aromatic hydrocarbons (toluene, benzene, and ethylbenzene), with a sub-10 ppm limit of detection (LoD) and a negligible sensitivity toward humidity. Our results show the potential of PS-DEGDB-CB composite as a selective and cost-effective sensory material compatible with large-scale manufacturing techniques for selective near-room-temperature detection of toxic VOCs.

All-Printed Finger-Inspired Tactile Sensor Array for Microscale Texture Detection and 3D Reconstruction.

Electronic skins are expected to replicate a human-like tactile sense, which significantly detects surface information, including geometry, material, and temperature. Although most texture features can be sensed in the horizontal direction, the lack of effective approaches for detecting vertical properties limits the development of artificial skin based on tactile sensors. In this study, an all-printed finger-inspired tactile sensor array is developed to realize the 3D detection and reconstruction of microscale structures. A beam structure with a suspended multilayer membrane is proposed, and a tactile sensor array of 12 units arranged in a dual-column layout is developed. This architecture enables the tactile sensor array to obtain comprehensive geometric information of micro-textures, including 3D morphology and clearance characteristics, and optimizes the 3D reconstruction patterns by self-calibration. Moreover, an innovative screen-printing technology incorporating multilayer printing and sacrificial-layer techniques is adopted to print the entire device. In additon, a Braille recognition system utilizing this tactile sensor array is developed to interpret Shakespeare's quotes printed in Grade 2 Braille. The abovementioned demonstrations reveal an attractive future vision for endowing bioinspired robots with the unique capability of touching and feeling the microscale real world and reconstructing it in the cyber world.

Multi- and Gray-Scale Thermal Lithography of Silk Fibroin as Water-Developable Resist for Micro and Nanofabrication.

Silk fibroin (SF) is a natural material with polymorphic structures that determine its water solubility and biodegradability, which can be altered by exposing it to heat. Here, a hybrid thermal lithography method combining scalable microscale laser-based patterning with nanoscale patterning based on thermal scanning probe lithography is developed. The latter enables in addition grayscale patterns to be made. The resolution limit of the writing in silk fibroin is studied by using a nanoscale heat source from a scanned nanoprobe. The heat thereby induces local water solubility change in the film, which can subsequently be developed in deionized water. Nanopatterns and grayscale patterns down to 50 nm lateral resolution are successfully written in the silk fibroin that behaves like a positive tone resist. The resulting patterned silk fibroin is then applied as a mask for dry etching of SiO2 to form a hard mask for further nano-processing. A very high selectivity of 42:1 between SiO2 and silk fibroin is obtained allowing for high-aspect ratio structure to be fabricated. The fabricated nanostructures have very low line edge roughness of 5 ± 2 nm. The results demonstrate the potential of silk fibroin as a water-soluble resist for hybrid thermal lithography and precise micro/nanofabrication.

Combining thermal scanning probe lithography and dry etching for grayscale nanopattern amplification.

Grayscale structured surfaces with nanometer-scale features are used in a growing number of applications in optics and fluidics. Thermal scanning probe lithography achieves a lateral resolution below 10 nm and a vertical resolution below 1 nm, but its maximum depth in polymers is limited. Here, we present an innovative combination of nanowriting in thermal resist and plasma dry etching with substrate cooling, which achieves up to 10-fold amplification of polymer nanopatterns into SiO2 without proportionally increasing surface roughness. Sinusoidal nanopatterns in SiO2 with 400 nm pitch and 150 nm depth are fabricated free of shape distortion after dry etching. To exemplify the possible applications of the proposed method, grayscale dielectric nanostructures are used for scalable manufacturing through nanoimprint lithography and for strain nanoengineering of 2D materials. Such a method for aspect ratio amplification and smooth grayscale nanopatterning has the potential to find application in the fabrication of photonic and nanoelectronic devices.

Electrowriting of SU-8 Microfibers.

As microfiber-based additive manufacturing (AM) technologies, melt electrowriting (MEW) and solution electrowriting (SEW) have demonstrated efficacy with more biomedically relevant materials. By processing SU-8 resin using MEW and SEW techniques, a material with substantially different mechanical, thermal, and optical properties than that typically processed is introduced. SU-8 polymer is temperature sensitive and requires the devising of a specific heating protocol to be properly processed. Smooth-surfaced microfibers resulted from MEW of SU8 for a short period (from 30 to 90 min), which provides the greatest control and, thus, reproducibility of the printed microfibers. This investigation explores various parameters influencing the electrowriting process, printing conditions, and post-processing to optimize the fabrication of intricate 3D structures. This work demonstrates the controlled generation of straight filaments and complex multi-layered architectures, which were characterized by brightfield, darkfield, and scanning electron microscopy (SEM). This research opens new avenues for the design and development of 3D-printed photonic systems by leveraging the properties of SU-8 after both MEW and SEW processing.

CAFM investigations of filamentary conduction in Cu2O ReRAM devices fabricated using stencil lithography technique.

With the objective of understanding the role of size and current level of filamentary regions on the resistive switching parameters, detailed conductive atomic force microscope investigations of resistive memory cells having different dimensions have been carried out in this study. Cu-Cu(2)O-Ti memory cells having dimensions of 150, 50 and 25 µm have been fabricated on the same substrate using a stencil lithography technique. The dependence of resistive switching parameters on the device dimensions can be directly related to the average size, current level of the filaments and difference in these parameters between the low resistance state (LRS) and high resistance state (HRS). It is observed that the large increase in the ratio of current in the two states in cells having lower dimensions is mainly due to the smaller number of conducting regions in the HRS, indicating efficient switching from the LRS to the HRS at lower dimensions.

Effects of crystalloids and colloids on liver and intestine microcirculation and function in cecal ligation and puncture induced septic rodents.

BACKGROUND: Septic acute liver and intestinal failure is associated with a high mortality. We therefore investigated the influence of volume resuscitation with different crystalloid or colloid solutions on liver and intestine injury and microcirculation in septic rodents. METHODS: Sepsis was induced by cecal ligation and puncture (CLP) in 77 male rats. Animals were treated with different crystalloids (NaCl 0.9% (NaCl), Ringer's acetate (RA)) or colloids (Gelafundin 4% (Gel), 6% HES 130/0.4 (HES)). After 24 h animals were re-anesthetized and intestinal (n = 6/group) and liver microcirculation (n = 6/group) were obtained using intravital microscopy, as well as macrohemodynamic parameters were measured. Blood assays and organs were harvested to determine organ function and injury. RESULTS: HES improved liver microcirculation, cardiac index and DO(2)-I, but significantly increased IL-1ß, IL-6 and TNF-α levels and resulted in a mortality rate of 33%. Gel infused animals revealed significant reduction of liver and intestine microcirculation with severe side effects on coagulation (significantly increased PTT and INR, decreased haemoglobin and platelet count). Furthermore Gel showed severe hypoglycemia, acidosis and significantly increased ALT and IL-6 with a lethality of 29%. RA exhibited no derangements in liver microcirculation when compared to sham and HES. RA showed no intestinal microcirculation disturbance compared to sham, but significantly improved the number of intestinal capillaries with flow compared to HES. All RA treated animals survided and showed no severe side effects on coagulation, liver, macrohemodynamic or metabolic state. CONCLUSIONS: Gelatine 4% revealed devastated hepatic and intestinal microcirculation and severe side effects in CLP induced septic rats, whereas the balanced crystalloid solution showed stabilization of macro- and microhemodynamics with improved survival. HES improved liver microcirculation, but exhibited significantly increased pro-inflammatory cytokine levels. Crystalloid infusion revealed best results in mortality and microcirculation, when compared with colloid infusion.

High throughput nanofabrication of silicon nanowire and carbon nanotube tips on AFM probes by stencil-deposited catalysts.

A new and versatile technique for the wafer scale nanofabrication of silicon nanowire (SiNW) and multiwalled carbon nanotube (MWNT) tips on atomic force microscope (AFM) probes is presented. Catalyst material for the SiNW and MWNT growth was deposited on prefabricated AFM probes using aligned wafer scale nanostencil lithography. Individual vertical SiNWs were grown epitaxially by a catalytic vapor-liquid-solid (VLS) process and MWNTs were grown by a plasma-enhanced chemical vapor (PECVD) process on the AFM probes. The AFM probes were tested for imaging micrometers-deep trenches, where they demonstrated a significantly better performance than commercial high aspect ratio tips. Our method demonstrates a reliable and cost-efficient route toward wafer scale manufacturing of SiNW and MWNT AFM probes.

[The solution of nonlinear function of ion mobility based on FAIMS spectrum peak position].

FAIMS's ion separation mechanism is based on analyte's characteristic nonlinear relationship between its ion mobility and applied electric field strength. Present characterization methods for this nonlinear relationship are based on precarious assumptions which incur substantial errors under many circumstances. A rigorous method for solving the second and fourth taylor series coefficient of this relationship based on dispersion voltage value (assuming half-sinusoidal waveform) and associated compensation voltage value of spectrum peak is presented, alongside with rigorous analytical functions. FAIMS spectrums were obtained for ethanol, metaxylene and n-butanol using custom-built FAIMS spectrometer, and corresponding second and fourth taylor series coefficients were obtained with the proposed method. Evaluation shows that this method substantially reduces the RMS error between interpolated and measured peak compensation voltage values under different dispersion voltages, confirming its superiority over present methods. This rigorous method would help improve spectral resolutions of FAIMS spectrometer, facilitating high precision FAIMS spectrum database construction and accurate analyte discrimination.

SU-8 cantilever with integrated pyrolyzed glass-like carbon piezoresistor.

Glass-like carbon (GC) is a nongraphitizing material composed entirely of carbon atoms produced from selected organic polymer resins by controlled pyrolysis in an inert atmosphere. The GC properties are a combination of the properties of glass, ceramic, and graphite, including hardness, low density, low thermal conductivity, high chemical inertness, biocompatibility, high electrical conductivity, and microfabrication process compatibility. Despite these unique properties, the application of GC in mechanical sensors has not been explored thus far. Here, we investigate the electrical, structural, and chemical properties of GC thin films derived from epoxy-based negative photoresist SU-8 pyrolyzed from 700 to 900 °C. In addition, we fabricated microGC piezoresistors pyrolyzed at 700 and 900 °C and integrated them into nonpyrolyzed SU-8 cantilevers to create microelectromechanical systems (MEMS) mechanical sensors. The sensitivities of the GC sensor to strain, force, surface stress, and acceleration are characterized to demonstrate their potential and limits for electromechanical microdevices.

Nanopore Generation in Biodegradable Silk/Magnetic Nanoparticle Membranes by an External Magnetic Field for Implantable Drug Delivery.

Implantable devices for localized and controlled drug release are important, e.g., for therapies of cancer and chronic pain. However, most of the existing active implants are limited by the usage of nonbiodegradable materials; thus, surgery is needed to extract them after the treatment, which leads to secondary damage. Here, we show a fully biodegradable composite membrane made from silk fibroin and magnetic nanoparticles (MNPs). The membrane porosity can be remotely modified by an alternating magnetic field, which opens nanopores by local heating of MNPs in the composite allowing a liquid to diffuse through them. The stability of the silk membrane in water can be prolonged up to several months by increasing its ß-sheet content through ethanol annealing. We present the following original findings. (a) Nanopores can be generated inside the silk/MNP composite membrane by exposing it to an external alternating magnetic field. (b) A longer exposure time results in more nanopore sites. (c) The controllable release of rhodamine B dye is achieved by tuning the period of exposure to the magnetic field. The obtained results demonstrate the suitability of the investigated silk/MNP composite membrane as a potential functional material for implantable drug delivery.

Recent progress in silk fibroin-based flexible electronics.

With the rapid development of the Internet of Things (IoT) and the emergence of 5G, traditional silicon-based electronics no longer fully meet market demands such as nonplanar application scenarios due to mechanical mismatch. This provides unprecedented opportunities for flexible electronics that bypass the physical rigidity through the introduction of flexible materials. In recent decades, biological materials with outstanding biocompatibility and biodegradability, which are considered some of the most promising candidates for next-generation flexible electronics, have received increasing attention, e.g., silk fibroin, cellulose, pectin, chitosan, and melanin. Among them, silk fibroin presents greater superiorities in biocompatibility and biodegradability, and moreover, it also possesses a variety of attractive properties, such as adjustable water solubility, remarkable optical transmittance, high mechanical robustness, light weight, and ease of processing, which are partially or even completely lacking in other biological materials. Therefore, silk fibroin has been widely used as fundamental components for the construction of biocompatible flexible electronics, particularly for wearable and implantable devices. Furthermore, in recent years, more attention has been paid to the investigation of the functional characteristics of silk fibroin, such as the dielectric properties, piezoelectric properties, strong ability to lose electrons, and sensitivity to environmental variables. Here, this paper not only reviews the preparation technologies for various forms of silk fibroin and the recent progress in the use of silk fibroin as a fundamental material but also focuses on the recent advanced works in which silk fibroin serves as functional components. Additionally, the challenges and future development of silk fibroin-based flexible electronics are summarized. (1) This review focuses on silk fibroin serving as active functional components to construct flexible electronics. (2) Recent representative reports on flexible electronic devices that applied silk fibroin as fundamental supporting components are summarized. (3) This review summarizes the current typical silk fibroin-based materials and the corresponding advanced preparation technologies. (4) The current challenges and future development of silk fibroin-based flexible electronic devices are analyzed.

Precision Surface Microtopography Regulates Cell Fate via Changes to Actomyosin Contractility and Nuclear Architecture.

Cells are able to perceive complex mechanical cues from their microenvironment, which in turn influences their development. Although the understanding of these intricate mechanotransductive signals is evolving, the precise roles of substrate microtopography in directing cell fate is still poorly understood. Here, UV nanoimprint lithography is used to generate micropillar arrays ranging from 1 to 10 µm in height, width, and spacing to investigate the impact of microtopography on mechanotransduction. Using mesenchymal stem cells (MSCs) as a model, stark pattern-specific changes in nuclear architecture, lamin A/C accumulation, chromatin positioning, and DNA methyltransferase expression, are demonstrated. MSC osteogenesis is also enhanced specifically on micropillars with 5 µm width/spacing and 5 µm height. Intriguingly, the highest degree of osteogenesis correlates with patterns that stimulated maximal nuclear deformation which is shown to be dependent on myosin-II-generated tension. The outcomes determine new insights into nuclear mechanotransduction by demonstrating that force transmission across the nuclear envelope can be modulated by substrate topography, and that this can alter chromatin organisation and impact upon cell fate. These findings have potential to inform the development of microstructured cell culture substrates that can direct cell mechanotransduction and fate for therapeutic applications in both research and clinical sectors.

Fluidic microstructuring of alginate hydrogels for the single cell niche.

Controlling alginate gel formation by diffusion of Ca(2+) ions through a filter barrier, a layer-by-layer deposition technique with resolution on the size scale of a single cell is presented. It offers the possibility of exposing cells under biocompatible conditions to microheterogeneous three-dimensional environments, mimicking the layered structure of extracellular matrix in tissues.

Thermal scanning probe lithography-a review.

Fundamental aspects and state-of-the-art results of thermal scanning probe lithography (t-SPL) are reviewed here. t-SPL is an emerging direct-write nanolithography method with many unique properties which enable original or improved nano-patterning in application fields ranging from quantum technologies to material science. In particular, ultrafast and highly localized thermal processing of surfaces can be achieved through the sharp heated tip in t-SPL to generate high-resolution patterns. We investigate t-SPL as a means of generating three types of material interaction: removal, conversion, and addition. Each of these categories is illustrated with process parameters and application examples, as well as their respective opportunities and challenges. Our intention is to provide a knowledge base of t-SPL capabilities and current limitations and to guide nanoengineers to the best-fitting approach of t-SPL for their challenges in nanofabrication or material science. Many potential applications of nanoscale modifications with thermal probes still wait to be explored, in particular when one can utilize the inherently ultrahigh heating and cooling rates.

Thermomechanical Nanocutting of 2D Materials.

Atomically thin materials, such as graphene and transition metal dichalcogenides, are promising candidates for future applications in micro/nanodevices and systems. For most applications, functional nanostructures have to be patterned by lithography. Developing lithography techniques for 2D materials is essential for system integration and wafer-scale manufacturing. Here, a thermomechanical indentation technique is demonstrated, which allows for the direct cutting of 2D materials using a heated scanning nanotip. Arbitrarily shaped cuts with a resolution of 20 nm are obtained in monolayer 2D materials, i.e., molybdenum ditelluride (MoTe2 ), molybdenum disulfide (MoS2 ), and molybdenum diselenide (MoSe2 ), by thermomechanically cleaving the chemical bonds and by rapid sublimation of the polymer layer underneath the 2D material layer. Several micro/nanoribbon structures are fabricated and electrically characterized to demonstrate the process for device fabrication. The proposed direct nanocutting technique allows for precisely tailoring nanostructures of 2D materials with foreseen applications in the fabrication of electronic and photonic nanodevices.