Doppler-shift compensated spatial heterodyne spectroscopy for rapidly moving sources.

High resolution luminosity product measurements of neutral beam emission in magnetized plasmas are severely limited by the artificial Doppler broadening inherent to the use of large diameter collection optics. In this paper, a broadening compensation method is developed for the spatial heterodyne spectroscopy interferometric technique. The compensation technique greatly reduces the artificial broadening, thereby enabling high resolution measurements at a significantly higher photon flux than previously available. Compensated and uncompensated measurements of emission generated by impact excitation of 61 keV deuterium neutrals in a tokamak plasma at the DIII-D National Fusion Facility are presented. The spectral width of the compensated measurement is ${\sim}0.13 \;{\rm{nm}}$, which is comparable to the instrument resolution. This width is ${\sim}4 \times$ smaller than the uncompensated width, which for the 20 cm diameter collection lens system utilized in this study is ${\sim}0.5 \;{\rm{nm}}$.

Noninductively Driven Tokamak Plasmas at Near-Unity Toroidal Beta.

Access to and characterization of sustained, toroidally confined plasmas with a very high plasma-to-magnetic pressure ratio (ß_{t}), low internal inductance, high elongation, and nonsolenoidal current drive is a central goal of present tokamak plasma research. Stable access to this desirable parameter space is demonstrated in plasmas with ultralow aspect ratio and high elongation. Local helicity injection provides nonsolenoidal sustainment, low internal inductance, and ion heating. Equilibrium analyses indicate ß_{t} up to ∼100% with a minimum |B| well spanning up to ∼50% of the plasma volume.

High Confinement Mode and Edge Localized Mode Characteristics in a Near-Unity Aspect Ratio Tokamak.

Tokamak experiments at near-unity aspect ratio A≲1.2 offer new insights into the self-organized H-mode plasma confinement regime. In contrast to conventional A∼3 plasmas, the L-H power threshold P_{LH} is ∼15× higher than scaling predictions, and it is insensitive to magnetic topology, consistent with modeling. Edge localized mode (ELM) instabilities shift to lower toroidal mode numbers as A decreases. These ultralow-A operations enable heretofore inaccessible J_{edge}(R,t) measurements through an ELM that show a complex multimodal collapse and the ejection of a current-carrying filament.

Spatial heterodyne spectroscopy for fast local magnetic field measurements of magnetized fusion plasmas.

A novel spectroscopy diagnostic for measuring internal magnetic fields in high temperature magnetized plasmas has been developed. It involves spectrally resolving the Balmer-α (656 nm) neutral beam radiation split by the motional Stark effect with a spatial heterodyne spectrometer (SHS). The unique combination of high optical throughput (3.7 mm2sr) and spectral resolution (δλ ∼ 0.1 nm) allows these measurements to be made with time resolution ≪1 ms. The high throughput is effectively utilized by incorporating a novel geometric Doppler broadening compensation technique in the spectrometer. The technique significantly reduces the spectral resolution penalty inherent to using large area, high-throughput optics while still collecting the large photon flux provided by such optics. In this work, fluxes of order 1010 s-1 support the measurement of deviations of <5 mT (ΔλStark ∼ 10-4 nm) in the local magnetic field with 50 µs time resolution. Example high time resolution measurements of the pedestal magnetic field throughout the ELM cycle of a DIII-D tokamak plasma are presented. Local magnetic field measurements give access to the dynamics of the edge current density, which is essential to understanding stability limits, edge localized mode generation and suppression, and predicting performance of H-mode tokamaks.

Characterisation of the early stages of solute clustering in 1Ni-1.3Mn welds containing Cu.

Microstructural characterisation of neutron irradiated low alloy steels is important for developing mechanistic understanding of irradiation embrittlement. This work is focused on the early stages of irradiation-induced clustering in a low Cu (0.03wt%), high Ni ( approximately 1wt%) weld. The weld was irradiated at a very high dose rate and then examined by atom probe (energy-compensated position-sensitive atom probe (ECOPoSAP) and local electrode atom probe (LEAP)) with supporting microstructural information obtained by small angle neutron scattering (SANS) and positron annihilation (PALA). It was demonstrated that extreme care must be taken optimising parameters used to characterise the extent of clustering. This is particularly important during the early stages of irradiation-damage when the clusters are poorly defined and significant compositional variations are present in what is traditionally described as matrix. Analysis of the irradiated materials showed increasing clustering of Cu, Mn, Ni and Si with dose. In the low Cu steel the results showed that initially the irradiation damage results in clustering of Mn, Ni and Si, but at very high doses, at very high dose rates, redistribution of Si is significantly more advanced than that for Mn and Ni.

Spatial heterodyne spectroscopy for high speed measurements of Stark split neutral beam emission in a high temperature plasma.

Measurement of electrostatic potential, or local electric field, turbulence is a critical missing component in validating nonlinear turbulence and transport simulations of fusion plasmas. A novel diagnostic is being developed for measuring local electric field fluctuations, E ̃ ( r , t ) , via high-speed measurements of the light emitted from a hydrogenic neutral beam. It exploits the proportionality of the spectral line splitting from the Motional Stark Effect to the total electric field experienced by the neutral atom at the excitation site. The measurement is localized by the usual cross-beam geometry of beam-spectroscopy measurements. The corner stone of the diagnostic is a high spectral resolution, high etendue spatial heterodyne spectrometer (SHS). A SHS design with high etendue (∼5 mm2 sr) and resolution (∼0.14 nm) meets the formidable spectrometer requirements. Field tests of the spectrometer at the DIII-D tokamak demonstrate that the beam emission spectrum produced by the SHS agrees with that of a traditional spectrometer and that the measured flux is adequate for turbulence studies.

Evaluation of classical precipitation descriptions for γ ″ ( Ni 3 Nb - D0 22 ) in Ni-base superalloys.

The growth/coarsening kinetics of γ ″ ( Ni 3 Nb - D0 22 ) precipitates have been found by numerous researchers to show an apparent correspondence with the classical (Ostwald ripening) equation outlined by Lifshitz, Slyozov and (separately) Wagner for a diffusion controlled regime. Nevertheless, a significant disparity between the actual precipitate size distribution shape and that predicted by LSW is frequently observed in the interpretation of these results, the origin of which is unclear. Analysis of the literature indicates one likely cause for this deviation from LSW for γ ″ precipitates is the "encounter" phenomenon described by Davies et al. (Acta Metall 28(2):179-189, 1980) that is associated with secondary phases comprising a high volume fraction. Consequently, the distributions of both γ ″ precipitates described in the literature (Alloy 718) and measured in this research in Alloy 625 are analysed through employing the Lifshitz-Slyozov-Encounter-Modified (LSEM) formulation (created by Davies et al.). The results of the LSEM analysis show good far better agreement than LSW with experimental distributions after the application of a necessary correction for what is termed in this research as "directional encounter". Moreover, the activation energy for γ ″ coarsening in Alloy 625 shows conformity with literature data once the effect of heterogeneous (on dislocations) precipitate nucleation at higher temperatures is accounted for.

The application of in situ analytical transmission electron microscopy to the study of preferential intergranular oxidation in Alloy 600.

In situ analytical transmission electron microscopy (TEM) can provide a unique perspective on dynamic reactions in a variety of environments, including liquids and gases. In this study, in situ analytical TEM techniques have been applied to examine the localised oxidation reactions that occur in a Ni-Cr-Fe alloy, Alloy 600, using a gas environmental cell at elevated temperatures. The initial stages of preferential intergranular oxidation, shown to be an important precursor phenomenon for intergranular stress corrosion cracking in pressurized water reactors (PWRs), have been successfully identified using the in situ approach. Furthermore, the detailed observations correspond to the ex situ results obtained from bulk specimens tested in hydrogenated steam and in high temperature PWR primary water. The excellent agreement between the in situ and ex situ oxidation studies demonstrates that this approach can be used to investigate the initial stages of preferential intergranular oxidation relevant to nuclear power systems.

Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel.

Creep cavitation in an ex-service nuclear steam header Type 316 stainless steel sample is investigated through a multiscale tomography workflow spanning eight orders of magnitude, combining X-ray computed tomography (CT), plasma focused ion beam (FIB) scanning electron microscope (SEM) imaging and scanning transmission electron microscope (STEM) tomography. Guided by microscale X-ray CT, nanoscale X-ray CT is used to investigate the size and morphology of cavities at a triple point of grain boundaries. In order to understand the factors affecting the extent of cavitation, the orientation and crystallographic misorientation of each boundary is characterised using electron backscatter diffraction (EBSD). Additionally, in order to better understand boundary phase growth, the chemistry of a single boundary and its associated secondary phase precipitates is probed through STEM energy dispersive X-ray (EDX) tomography. The difference in cavitation of the three grain boundaries investigated suggests that the orientation of grain boundaries with respect to the direction of principal stress is important in the promotion of cavity formation.

Large volume serial section tomography by Xe Plasma FIB dual beam microscopy.

Ga(+) Focused Ion Beam-Scanning Electron Microscopes (FIB-SEM) have revolutionised the level of microstructural information that can be recovered in 3D by block face serial section tomography (SST), as well as enabling the site-specific removal of smaller regions for subsequent transmission electron microscope (TEM) examination. However, Ga(+) FIB material removal rates limit the volumes and depths that can be probed to dimensions in the tens of microns range. Emerging Xe(+) Plasma Focused Ion Beam-Scanning Electron Microscope (PFIB-SEM) systems promise faster removal rates. Here we examine the potential of the method for large volume serial section tomography as applied to bainitic steel and WC-Co hard metals. Our studies demonstrate that with careful control of milling parameters precise automated serial sectioning can be achieved with low levels of milling artefacts at removal rates some 60× faster. Volumes that are hundreds of microns in dimension have been collected using fully automated SST routines in feasible timescales (<24h) showing good grain orientation contrast and capturing microstructural features at the tens of nanometres to the tens of microns scale. Accompanying electron back scattered diffraction (EBSD) maps show high indexing rates suggesting low levels of surface damage. Further, under high current Ga(+) FIB milling WC-Co is prone to amorphisation of WC surface layers and phase transformation of the Co phase, neither of which have been observed at PFIB currents as high as 60nA at 30kV. Xe(+) PFIB dual beam microscopes promise to radically extend our capability for 3D tomography, 3D EDX, 3D EBSD as well as correlative tomography.

Validation of an early language milestone scale in a high-risk population.

Detailed language evaluations were obtained by interviewing the parents of 191 healthy children aged 0 to 3 years, and by testing the children themselves. From these data, normative values were derived for 41 language milestones in the first 36 months of life. These values were used to construct the Early Language Milestone Scale (ELM Scale), a brief language assessment tool suitable for use by general pediatricians. Physician use of the ELM Scale in a population of 119 children considered at high risk for the presence of developmental disability yielded 97% sensitivity and 93% specificity for the ELM Scale as a detector of developmentally delayed children, when compared with more formal developmental measures as applied by a clinical psychologist or speech pathologist. Early language milestones are a sensitive indicator of developmental integrity; delayed achievement of early language milestones strongly suggests the presence of a significant underlying developmental disability. The ELM Scale may be adopted as a valid measure of developmental status among children considred at high risk for the presence of developmental disabilities.

Hormonal control and function of secretory proteins.

The uterus of the pig secretes large amounts of protein in response to progesterone. Estrogen alone has little effect but in combination with progesterone is synergistic at low doses and inhibitory at high doses. The responses of the uterus to progesterone require prolonged hormone treatment and are not immediate. The proteins secreted by the uterus of all species are believed to play some role in the nutritional and developmental support of the conceptuses, particularly during early pregnancy. Such a role is likely to be of greater importance in species such as the pig which possesses a noninvasive, diffuse-type of epitheliochorial placentation. A group of basic polypeptides dominates the uterine secretions of the pig. The best characterized is uteroferrin, a purple colored, iron-containing acid phosphatase which transports iron across the placenta. Three polypeptides which are found associated noncovalently with uteroferrin have been shown to be antigenically closely related to each other and to have arisen from a single precursor polypeptide. Their function is unknown. A family of plasmin/trypsin inhibitors which show sequence homology with bovine pancreatic trypsin inhibitor (aprotinin) has been well characterized and appears to control intrauterine proteolytic events initiated by the conceptuses. Several other proteins secreted in response to progesterone remain to be characterized and functionally defined.

Growth and the microstructural and ferroelectric characterization of oriented BaMgF(4) thin films.

The growth of ferroelectric BaMgF(4) thin films on Si(100), sapphire, and other substrates under ultrahigh vacuum (UHV) conditions is reported. Microstructural characterization of the films using transmission electron microscopy (TEM) revealed that they were oriented crystalline films, although not epitaxial. Ferroelectric hysteresis measurements yielded spontaneous polarization and coercivity values of almost 1.0 muC/cm(2) and 160 kV/cm, respectively. The discrepancy with the bulk ferroelectric values were attributed to the electrical contacts, impurities in the film, and lack of polar axis orientation. Preliminary capacitance-voltage (C-V) hysteresis measurements on a 480-nm-thick BaMgF(4) film yielded a 10.8-V threshold shift (memory window) in response to a +/-10-V programming voltage for a MIS gate structure similar to that of the ferroelectric memory field-effect transistor (FEMFET).

Measurement of size-dependent composition variations for gamma prime (γ') precipitates in an advanced nickel-based superalloy.

Energy-dispersive X-ray (EDX) spectroscopy in the scanning transmission electron microscope (STEM) has been used to demonstrate the presence of size-dependent compositional variation for L12-structured Ni3Al-type gamma-prime (γ') precipitates within a commercial RR1000 Ni-based superalloy. This semi-quantitative elemental analysis has been achieved using electrochemical extraction of the γ' precipitates from the γ matrix. The applicability of this approach to size-dependent compositional analysis of precipitates was confirmed by a comparison of the size distribution for the extracted precipitates with those present in traditional electropolished foil specimens in the size range 20-250nm. By applying suitable thickness-dependent absorption-corrections we have demonstrated that the composition of γ' precipitates in our material depends on the size of the precipitate in the range of 5nm to 3µm. In particular, the Al content was observed to increase in smaller γ' precipitates while Ti and Ta contents are constant for all sizes of precipitate. Hf was observed to be present only in the largest precipitates. This type of local compositional information provides invaluable input to assess the accuracy of microstructural modelling for these complex alloys and provides new evidence supporting the importance of anti-site diffusion.

Multi-point, high-speed passive ion velocity distribution diagnostic on the Pegasus Toroidal Experiment.

A passive ion temperature polychromator has been deployed on Pegasus to study power balance and non-thermal ion distributions that arise during point source helicity injection. Spectra are recorded from a 1 m F/8.6 Czerny-Turner polychromator whose output is recorded by an intensified high-speed camera. The use of high orders allows for a dispersion of 0.02 Å/mm in 4th order and a bandpass of 0.14 Å (~13 km/s) at 3131 Å in 4th order with 100 µm entrance slit. The instrument temperature of the spectrometer is 15 eV. Light from the output of an image intensifier in the spectrometer focal plane is coupled to a high-speed CMOS camera. The system can accommodate up to 20 spatial points recorded at 0.5 ms time resolution. During helicity injection, stochastic magnetic fields keep T(e) low (100 eV) and thus low ionization impurities penetrate to the core. Under these conditions, high core ion temperatures are measured (T(i) ≈ 1.2 keV, T(e) ≈ 0.1 keV) using spectral lines from carbon III, nitrogen III, and boron IV.

Atom probe tomography of reactor pressure vessel steels: an analysis of data integrity.

In this work, the importance of optimising experimental conditions for the analysis of reactor pressure vessel (RPV) steels using atom probe tomography is explored. The quality of the resultant atom probe data is assessed in terms of detection efficiency, noise levels and mass resolution. It is demonstrated that artefacts can exist even when experimental conditions have been optimised. In particular, it is shown that surface diffusion of some minority species, including P and Si, to major poles prior to field evaporation can be an issue. The effects were most noticeable during laser pulsing. The impact of surface migration on the characterisation of dislocations and grain boundaries is assessed. The importance of selecting appropriate regions of the reconstructed data for subsequent re-analysis is emphasised.