Surface-Enriched Room-Temperature Liquid Bismuth for Catalytic CO2 Reduction.

Bismuth-based electrocatalysts are effective for carbon dioxide (CO2) reduction to formate. However, at room temperature, these materials are only available in solid state, which inevitably suffers from surface deactivation, declining current densities, and Faradaic efficiencies. Here, the formation of a liquid bismuth catalyst on the liquid gallium surface at ambient conditions is shown as its exceptional performance in the electrochemical reduction of CO2 (i.e., CO2RR). By doping a trace amount of bismuth (740 ppm atomic) in gallium liquid metal, a surface enrichment of bismuth by over 400 times (30 at%) in liquid state is obtained without atomic aggregation, achieving 98% Faradic efficiency for CO2 conversion to formate over 80 h. Ab initio molecular simulations and density functional theory calculations reveal that bismuth atoms in the liquid state are the most energetically favorable sites for the CO2RR intermediates, superior to solid Bi-sites, as well as joint GaBi-sites. This study opens an avenue for fabricating high-performing liquid-state metallic catalysts that cannot be reached by elementary metals under electrocatalytic conditions.

How effective are external cues and analogies in enhancing sprint and jump performance in academy soccer players?

This study investigated the effect of external (EC) and internal coaching cues (IC), analogies with a directional component (ADC) on sprint (20 m) and vertical jump performance in academy soccer players (n = 20). A repeated-measures analysis, with post-hoc comparisons, was used to identify any differences between these cues and a neutral (control) cue. Significant differences were found for both sprint (p < 0.001) and jump (p = 0.022) comparisons among cue types. In post-hoc analyses for the 20 m sprint, significant differences were observed between the EC and the IC, favouring the EC (p < 0.01, ES = 1.27 [CI: 0.24, 2.30]), and "away" ADC and the IC, favouring the "away" ADC (p < 0.01, ES = 1.21 [CI: 0.19, 2.22]). No other cues showed significant differences. For vertical jump, there was just one significant difference between comparisons, that being for the "away" ADC vs. the neutral cue, favouring the latter (p = 0.023, ES = 0.4 [CI: -0.04 to 0.84]). It appears that ECs and ADCs are most effective when coaching sprinting performance in academy soccer players. However, simply encouraging maximal effort from a youth athlete also appears to be a reasonable cueing strategy to drive performance in youth athletes.

Surface-Tailored InP Nanowires via Self-Assembled Au Nanodots for Efficient and Stable Photoelectrochemical Hydrogen Evolution.

With a band gap close to the Shockley-Quiesser limit and excellent conduction band alignment with the water reduction potential, InP is an ideal photocathode material for photoelectrochemical (PEC) water reduction. Here, we develop facile self-assembled Au nanodots based on dewetting phenomena as a masking technique to fabricate wafer-scale InP nanowires (NWs) via a top-down approach. In addition, we report dual-function wet treatment using sulfur-dissolved oleylamine (S-OA) to remove a plasma-damaged surface in a controlled manner and stabilize InP NWs against surface corrosion in harsh electrolyte solutions. The resulting InP NW photocathodes exhibit an excellent photocurrent density of 33 mA/cm2 under 1 sun illumination in 1 M HCl with a highly stabilized performance without needing additional protection layers. Our approach combining large-area NW fabrication and surface engineering synergistically enhances light harvesting and PEC performance and stability, thereby providing a pathway for the development of efficient and durable InP photoelectrodes in a scalable manner.

Interrogation of the Effect of Polymorphism of a Metal-Organic Framework Host on the Structure of Embedded Pd Guest Nanoparticles.

Metal-organic frameworks (MOFs) are very promising host materials for nanoscale guest materials. However, some MOFs such as MIL-53 are known to undergo phase transitions which can complicate the guest particle size control. In this study, Pd nanoparticles embedded in Al-MIL-53 were synthesised via (a) electrodeposition and (b) gas-phase reduction. A thorough structural investigation revealed that each synthesis method most likely favoured a different phase of Al-MIL-53, presenting the possibility of MOF phase selection as a technique for size control of embedded nanoparticles. For the first time, we hereby report the use of pair distribution function analysis to successfully investigate the structure and morphology of guest particles embedded in a MOF host.

Photoelectrochemical studies of InGaN/GaN MQW photoanodes.

The research interest in photoelectrochemical (PEC) water splitting is ever growing due to its potential to contribute towards clean and portable energy. However, the lack of low energy band gap materials with high photocorrosion resistance is the primary setback inhibiting this technology from commercialisation. The ternary alloy InGaN shows promise to meet the photoelectrode material requirements due to its high chemical stability and band gap tunability. The band gap of InGaN can be modulated from the UV to IR regions by adjusting the In concentration so as to absorb the maximum portion of the solar spectrum. This paper reports on the influence of In concentration on the PEC properties of planar and nanopillar (NP) InGaN/GaN multi-quantum well (MQW) photoanodes, where NPs were fabricated using a top-down approach. Results show that changing the In concentration, while having a minor effect on the PEC performance of planar MQWs, has an enormous impact on the PEC performance of NP MQWs, with large variations in the photocurrent density observed. Planar photoanodes containing MQWs generate marginally lower photocurrents compared to photoanodes without MQWs when illuminated with sunlight. NP MQWs with 30% In generated the highest photocurrent density of 1.6 mA cm-2, 4 times greater than that of its planar counterpart and 1.8 times greater than that of the NP photoanode with no MQWs. The InGaN/GaN MQWs also slightly influenced the onset potential of both the planar and NP photoanodes. Micro-photoluminescence, diffuse reflectance spectroscopy and IPCE measurements are used to explain these results.

Do verbal coaching cues and analogies affect motor skill performance in youth populations?

PURPOSE: The way coaching cues are worded can impact on the quality with which a subsequent motor skill is executed. However, there have been few investigations on the effect of coaching cues on basic motor skill performance in youths. METHOD: Across several international locations, a series of experiments were undertaken to determine the effect of external coaching cues (EC), internal coaching cues (IC), analogies with a directional component (ADC) and neutral control cues on sprint time (20 m) and vertical jump height in youth performers. These data were combined using internal meta-analytical techniques to pool results across each test location. This approach was amalgamated with a repeated-measures analysis to determine if there were any differences between the ECs, ICs and ADCs within the different experiments. RESULTS: 173 participants took part. There were no differences between the neutral control and experimental cues in any of the internal meta-analyses except where the control was superior to the IC for vertical jump (d = -0.30, [-0.54, -0.05], p = 0.02). Just three of eleven repeated-measures analyses showed significant differences between the cues at each experimental location. Where significant differences were noted, the control cue was most effective with some limited evidence supporting the use of ADCs (d = 0.32 to 0.62). CONCLUSION: These results suggest the type of cue or analogy provided to a youth performer has little subsequent effect on sprint or jump performance. Accordingly, coaches might take a more specific approach that is suited to the level or preferences of a particular individual.

InGaAsP as a Promising Narrow Band Gap Semiconductor for Photoelectrochemical Water Splitting.

While photoelectrochemical (PEC) water splitting is a very promising route toward zero-carbon energy, conversion efficiency remains limited. Semiconductors with narrower band gaps can absorb a much greater portion of the solar spectrum, thereby increasing efficiency. However, narrow band gap (∼1 eV) III-V semiconductor photoelectrodes have not yet been thoroughly investigated. In this study, the narrow band gap quaternary III-V alloy InGaAsP is demonstrated for the first time to have great potential for PEC water splitting, with the long-term goal of developing high-efficiency tandem PEC devices. TiO2-coated InGaAsP photocathodes generate a photocurrent density of over 30 mA/cm2 with an onset potential of 0.45 V versus reversible hydrogen electrode, yielding an applied bias efficiency of over 7%. This is an excellent performance, given that nearly all power losses can be attributed to reflection losses. X-ray photoelectron spectroscopy and photoluminescence spectroscopy show that InGaAsP and TiO2 form a type-II band alignment, greatly enhancing carrier separation and reducing recombination losses. Beyond water splitting, the tunable band gap of InGaAsP could be of further interest in other areas of photocatalysis, including CO2 reduction.