RESUMEN
Large-scale transient expression of recombinant proteins in plants is increasingly used and requires the multi-liter cultivation of Agrobacterium tumefaciens transformed with an expression vector, which is often cloned in Escherichia coli first. Depending on the promoter, unintentional activity can occur in both bacteria, which could pose a safety risk to the environment and operators if the protein is toxic. To assess the risk associated with transient expression, we first tested expression vectors containing the CaMV35S promoter known to be active in plants and bacteria, along with controls to measure the accumulation of the corresponding recombinant proteins. We found that, in both bacteria, even the stable model protein DsRed accumulated at levels near the detection limit of the sandwich ELISA (3.8 µg L-1). Higher levels were detected in short cultivations (< 12 h) but never exceeded 10 µg L-1. We determined the abundance of A. tumefaciens throughout the process, including infiltration. We detected few bacteria in the clarified extract and found none after blanching. Finally, we combined protein accumulation and bacterial abundance data with the known effects of toxic proteins to estimate critical exposures for operators. We found that unintended toxin production in bacteria is negligible. Furthermore, the intravenous uptake of multiple milliliters of fermentation broth or infiltration suspension would be required to reach acute toxicity even when handling the most toxic products (LD50 ~ 1 ng kg-1). The unintentional uptake of such quantities is unlikely and we therefore regard transient expression as safe in terms of the bacterial handling procedure.
Asunto(s)
Agrobacterium tumefaciens , Agrobacterium tumefaciens/genética , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Regiones Promotoras Genéticas , Fermentación , Medición de Riesgo , Plantas Modificadas Genéticamente/genética , Plantas Modificadas Genéticamente/metabolismoRESUMEN
Nanoparticles are used as carriers for the delivery of drugs and imaging agents. Proteins are safer than synthetic nanocarriers due to their greater biocompatibility and the absence of toxic degradation products. In this context, ferritin has the additional benefit of inherently targeting the membrane receptor transferrin 1, which is overexpressed by most cancer cells. Furthermore, this self-assembling multimeric protein can be loaded with more than 2000 iron atoms, as well as drugs, contrast agents, and other cargos. However, recombinant ferritin currently costs ~3.5 million g-1 , presumably because the limited number of producers cannot meet demand, making it generally unaffordable as a nanocarrier. Because plants can produce proteins at very-large-scale, we developed a simple, proof-of-concept process for the production of the human ferritin heavy chain by transient expression in Nicotiana benthamiana. We optimized the protein yields by screening different compartments and 5'-untranslated regions in PCPs, and selected the best-performing construct for production in differentiated plants. We then established a rapid and scalable purification protocol by combining pH and heat treatment before extraction, followed by an ultrafiltration/diafiltration size-based separation process. The optimized process achieved ferritin levels of ~40 mg kg-1 fresh biomass although depth filtration limited product recovery to ~7%. The purity of the recombinant product was >90% at costs ~3% of the current sales price. Our method therefore allows the production of affordable ferritin heavy chain as a carrier for therapeutic and diagnostic agents, which is suitable for further stability and functionality testing in vitro and in vivo.
Asunto(s)
Apoferritinas , Neoplasias , Humanos , Neoplasias/tratamiento farmacológico , Ferritinas/genética , Hierro , Sistemas de Liberación de MedicamentosRESUMEN
Nuclear magnetic resonance (NMR) spectroscopy can be used to determine the structure, dynamics and interactions of proteins. However, protein NMR requires stable isotope labelling for signal detection. The cells used for the production of recombinant proteins must therefore be grown in medium containing isotopically labelled substrates. Stable isotope labelling is well established in Escherichia coli, but bacteria are only suitable for the production of simple proteins without post-translational modifications. More complex proteins require eukaryotic production hosts, but their growth can be impaired by labelled media, thus reducing product yields and increasing costs. To address this limitation, we used media supplemented with isotope-labelled substrates to cultivate the tobacco-derived cell line BY-2, which was then cast into plant cell packs (PCPs) for the transient expression of a labelled version of the model protein GB1. Mass spectrometry confirmed the feasibility of isotope labelling with 15 N and 2 H using this approach. The resulting NMR spectrum featured a signal dispersion comparable to recombinant GB1 produced in E. coli. PCPs therefore offer a rapid and cost-efficient alternative for the production of isotope-labelled proteins for NMR analysis, especially suitable for complex proteins that cannot be produced in microbial systems.
Asunto(s)
Escherichia coli , Células Vegetales , Escherichia coli/genética , Marcaje Isotópico/métodos , Espectroscopía de Resonancia Magnética/métodos , Células Vegetales/metabolismo , Proteínas Recombinantes/genéticaRESUMEN
Plants as a platform for recombinant protein expression are now economically comparable to well-established systems, such as microbes and mammalian cells, thanks to advantages such as scalability and product safety. However, downstream processing accounts for the majority of the final product costs because plant extracts contain large quantities of host cell proteins (HCPs) that must be removed using elaborate purification strategies. Heat precipitation in planta (blanching) can remove â¼80% of HCPs and thus simplify further purification steps, but this is only possible if the target protein is thermostable. Here we describe a combination of blanching and chromatography to purify the thermostable transmission-blocking malaria vaccine candidate FQS, which was transiently expressed in Nicotiana benthamiana leaves. If the blanching temperature exceeded a critical threshold of â¼75⯰C, FQS was no longer recognized by the malaria transmission-blocking monoclonal antibody 4B7. A design-of-experiments approach revealed that reducing the blanching temperature from 80⯰C to 70⯰C restored antibody binding while still precipitating most HCPs. We also found that blanching inhibited the degradation of FQS in plant extracts, probably due to the thermal inactivation of proteases. We screened hydrophobic interaction chromatography materials using miniature columns and a liquid-handling station. Octyl Sepharose achieved the highest FQS purity during the primary capture step and led to a final purity of â¼72% with 60% recovery via step elution. We found that 30-75% FQS was lost during ultrafiltration/diafiltration, giving a final yield of 9â¯mgâ¯kg-1 plant material after purification based on an initial yield of â¼49â¯mgâ¯kg-1 biomass after blanching.
Asunto(s)
Anticuerpos Monoclonales/química , Anticuerpos Antiprotozoarios/química , Vacunas contra la Malaria/aislamiento & purificación , Nicotiana/genética , Proteínas de Plantas/aislamiento & purificación , Proteínas Protozoarias/aislamiento & purificación , Anticuerpos Monoclonales/metabolismo , Anticuerpos Antiprotozoarios/metabolismo , Cromatografía de Afinidad/métodos , Clonación Molecular , Análisis Factorial , Expresión Génica , Vectores Genéticos/química , Vectores Genéticos/metabolismo , Calor , Vacunas contra la Malaria/biosíntesis , Vacunas contra la Malaria/genética , Hojas de la Planta/genética , Hojas de la Planta/metabolismo , Proteínas de Plantas/química , Plantas Modificadas Genéticamente , Unión Proteica , Desnaturalización Proteica , Proteínas Protozoarias/biosíntesis , Proteínas Protozoarias/genética , Proteínas Recombinantes/biosíntesis , Proteínas Recombinantes/genética , Proteínas Recombinantes/aislamiento & purificación , Sefarosa/análogos & derivados , Nicotiana/química , Nicotiana/metabolismo , Ultrafiltración/métodosRESUMEN
Antibody-drug conjugates (ADCs) can improve therapeutic indices compared to plain monoclonal antibodies (mAbs). However, ADC synthesis is complex because the components are produced separately in CHO cells (mAb) and often by chemical synthesis (drug). They are individually purified, coupled, and then the ADC is purified, increasing production costs compared to regular mAbs. In contrast, it is easier to produce recombinant fusion proteins consisting of an antibody derivative, linker and proteinaceous toxin, i.e. a recombinant immunotoxin (RIT). Plants are capable of the post-translational modifications needed for functional antibodies and can also express active protein toxins such as the recombinant mistletoe lectin viscumin, which is not possible in prokaryotes and mammalian cells respectively. Here, we used Nicotiana benthamiana and N. tabacum plants as well as tobacco BY-2 cell-based plant cell packs (PCPs) to produce effective RITs targeting CD64 as required for the treatment of myelomonocytic leukemia. We compared RITs with different subcellular targeting signals, linkers, and proteinaceous toxins. The accumulation of selected candidates was improved to ~ 40 mg kg-1 wet biomass using a design of experiments approach, and corresponding proteins were isolated with a purity of ~ 80% using an optimized affinity chromatography method with an overall yield of ~ 84%. One anti-CD64 targeted viscumin-based drug candidate was characterized in terms of storage stability and cytotoxicity test in vitro using human myelomonocytic leukemia cell lines. We identified bottlenecks in the plant-based expression platform that require further improvement and assessed critical process parameters that should be considered during process development for plant-made RITs.
Toxin type and domain sequence affect accumulation of recombinant immunotoxins.Transient expression in plant cell packs and intact plants correlates well.IC50 values of toxicity correlate with the cell surface receptor concentration.
Asunto(s)
Inmunotoxinas , Leucemia , Animales , Humanos , Cricetinae , Inmunotoxinas/genética , Inmunotoxinas/farmacología , Cricetulus , Células Vegetales , Nicotiana/genética , Anticuerpos Monoclonales/genética , Células CHORESUMEN
Introduction: Tobacco (Nicotiana tabacum) cv Bright Yellow-2 (BY-2) cell suspension cultures enable the rapid production of complex protein-based biopharmaceuticals but currently achieve low volumetric productivity due to slow biomass formation. The biomass yield can be improved with tailored media, which can be designed either by laborious trial-and-error experiments or systematic, rational design using mechanistic models, linking nutrient consumption and biomass formation. Methods: Here we developed an iterative experiment-modeling-optimization workflow to gradually refine such a model and its predictions, based on collected data concerning BY-2 cell macronutrient consumption (sucrose, ammonium, nitrate and phosphate) and biomass formation. Results and discussion: The biomass formation was well predicted by an unstructured segregated mechanistic Monod-type model as long as the nutrient concentrations did not approach zero (we omitted phosphate, which was completely depleted). Multi-criteria optimization for sucrose and biomass formation indicated the best tradeoff (in a Paretian sense) between maximum biomass yield and minimum process time by reducing the initial sucrose concentration, whereas the inoculation biomass could be increased to maximize the biomass yield or minimize the process time, which we confirmed in calibration experiments. The model became inaccurate at biomass densities > 8 g L-1 dry mass when sucrose was almost depleted. We compensated for this limitation by including glucose and fructose as sucrose hydrolysis products in the model. The remaining offset between the simulation and experimental data might be resolved by including intracellular pools of sucrose, ammonium, nitrate and phosphate. Overall, we demonstrated that iterative models can be used to systematically optimize conditions for bioreactor-based processes.
RESUMEN
The modeling of chromatographic separations can speed up downstream process development, reducing the time to market and corresponding development costs for new products such as pharmaceuticals. However, calibrating such models by identifying suitable parameter values for mass transport and sorption is a major, time-consuming challenge that can hinder model development and improvement. We therefore designed a new approach based on Bayesian optimization (BayesOpt) and Gaussian processes that reduced the time required to compute relevant chromatography parameters by up to two orders of magnitude compared to a multistart gradient descent and a genetic algorithm. We compared the three approaches side by side to process several internal and external datasets for ion exchange chromatography (based on a steric mass action isotherm) and hydrophobic interaction chromatography (a modified version of a recently published five-parameter isotherm) as well as different input data types (gradient elution data alone vs gradient elution and breakthrough data). We found that BayesOpt computation was consistently faster than the other approaches when using either single-core or 12-cores computer processing units. The error of the BayesOpt parameter estimates was higher than that of the competing algorithms, but still two orders of magnitude less than the variability of our experimental data, indicating BayesOpts applicability for chromatography modeling. The low computational demand of BayesOpt will facilitate rapid model development and improvement even for large datasets (e.g., > 100 proteins) and increase its suitability for research laboratories or small and medium enterprises lacking access to dedicated mainframe computers.
Asunto(s)
Algoritmos , Proteínas , Teorema de Bayes , Cromatografía por Intercambio Iónico , Distribución NormalRESUMEN
Incubation at pH 4.0 or blanching at â¼65°C facilitates the purification of biopharmaceutical proteins from plants by precipitating most of the host cell proteins (HCPs) before chromatography. However, both methods are compatible only with pH or thermostable target proteins whereas many target proteins may irreversibly denature, e.g., at pH < 4.0. Here, we developed a combined pH/temperature treatment for clarified tobacco extracts and intact leaves. The latter were subjected to a blanching procedure, i.e., the submersion into a hot buffer. Using a design of experiments approach we identified conditions that remove â¼70% of HCPs at â¼55°C, using the thermosensitive antibody 2G12 and the pH-sensitive DsRed as model proteins. We found that pH and temperature exerted a combined effect during the precipitation of HCPs in the pH range 5.0-7.0 at 35°C-60°C. For clarified extracts, the temperature required to achieve a DsRed purity threshold of 20% total soluble protein (TSP) increased from 54°C to 63°C when the pH was increased from 6.4 to 7.3. The pH-stable antibody 2G12 was less responsive to the combined treatment, but the purity of 1% TSP was achieved at 35°C instead of 44°C when the pH was reduced from 6.3 to 5.8. When blanching intact leaves, product losses were not exacerbated at pH 4.0. Indeed, the highest DsRed purity (58% TSP) was achieved at this pH, combined with a temperature of 60°C and an incubation time of 30 min. In contrast, the highest 2G12 purity (0.7% TSP) was achieved at pH 5.1 and 40°C with an incubation time of 20 min. Our data suggest that a combined pH/temperature regime can avoid extreme values of either parameter; therefore, broadening the applicability of these simple purification techniques to other recombinant proteins.
Asunto(s)
Nicotiana , Hojas de la Planta , Concentración de Iones de Hidrógeno , Proteínas Recombinantes/genética , TemperaturaRESUMEN
The high-throughput screening of recombinant protein expression is advantageous during early process development because it allows the identification of optimal expression constructs and process conditions. Simple screening platforms based on microtiter plates are available for microbes and animal cells, but this was not possible for plants until the development of plant cell packs (PCPs), also known as "cookies," which provide a versatile and scalable screening tool for recombinant protein production. PCPs are prepared from plant cell suspension cultures by removing the medium and molding the biomass. PCPs can be cast into 96-well plates for high-throughput screening, but the manual handling effort currently limits the throughput to â¼500 samples per day. We have therefore integrated the PCP method with a fully automated laboratory liquid-handling station. The "robot cookies" can be prepared and infiltrated with Agrobacterium tumefaciens by centrifugation, minimizing operator handling and reducing the likelihood of errors during repeated runs, such as those required in a design of experiments approach. The accumulation of fluorescent protein in the cytosol, apoplast, endoplasmic reticulum or plastids is easily detected using an integrated plate reader, reducing the inter-experimental variation to <5%. We also developed a detergent-based chemical lysis method for protein extraction in a 96-well format, which was adapted for automated downstream processing using miniaturized columns allowing subsequent protein analysis. The new automated method reduces the costs of the platform to <0.5 per PCP infiltration (a saving of >50%) and facilitates a five-fold increase in throughput to >2500 samples per day.
RESUMEN
Several epidemic and pandemic diseases have emerged over the last 20 years with increasing reach and severity. The current COVID-19 pandemic has affected most of the world's population, causing millions of infections, hundreds of thousands of deaths, and economic disruption on a vast scale. The increasing number of casualties underlines an urgent need for the rapid delivery of therapeutics, prophylactics such as vaccines, and diagnostic reagents. Here, we review the potential of molecular farming in plants from a manufacturing perspective, focusing on the speed, capacity, safety, and potential costs of transient expression systems. We highlight current limitations in terms of the regulatory framework, as well as future opportunities to establish plant molecular farming as a global, de-centralized emergency response platform for the rapid production of biopharmaceuticals. The implications of public health emergencies on process design and costs, regulatory approval, and production speed and scale compared to conventional manufacturing platforms based on mammalian cell culture are discussed as a forward-looking strategy for future pandemic responses.
RESUMEN
Transgenic plants have the potential to produce recombinant proteins on an agricultural scale, with yields of several tons per year. The cost-effectiveness of transgenic plants increases if simple cultivation facilities such as greenhouses can be used for production. In such a setting, we expressed a novel affinity ligand based on the fluorescent protein DsRed, which we used as a carrier for the linear epitope ELDKWA from the HIV-neutralizing antibody 2F5. The DsRed-2F5-epitope (DFE) fusion protein was produced in 12 consecutive batches of transgenic tobacco (Nicotiana tabacum) plants over the course of 2 years and was purified using a combination of blanching and immobilized metal-ion affinity chromatography (IMAC). The average purity after IMAC was 57 ± 26% (n = 24) in terms of total soluble protein, but the average yield of pure DFE (12 mg kg-1) showed substantial variation (± 97 mg kg-1, n = 24) which correlated with seasonal changes. Specifically, we found that temperature peaks (>28°C) and intense illuminance (>45 klx h-1) were associated with lower DFE yields after purification, reflecting the loss of the epitope-containing C-terminus in up to 90% of the product. Whereas the weather factors were of limited use to predict product yields of individual harvests conducted for each batch (spaced by 1 week), the average batch yields were well approximated by simple linear regression models using two independent variables for prediction (illuminance and plant age). Interestingly, accumulation levels determined by fluorescence analysis were not affected by weather conditions but positively correlated with plant age, suggesting that the product was still expressed at high levels, but the extreme conditions affected its stability, albeit still preserving the fluorophore function. The efficient production of intact recombinant proteins in plants may therefore require adequate climate control and shading in greenhouses or even cultivation in fully controlled indoor farms.
RESUMEN
Recombinant glycoproteins such as monoclonal antibodies have a major impact on modern healthcare systems, e.g., as the active pharmaceutical ingredients in anticancer drugs. A specific glycan profile is often necessary to achieve certain desirable activities, such as the effector functions of an antibody, receptor binding or a sufficient serum half-life. However, many expression systems produce glycan profiles that differ substantially from the preferred form (usually the form found in humans) or produce a diverse array of glycans with a range of in vivo activities, thus necessitating laborious and costly separation and purification processes. In contrast, protein glycosylation in plant cells is much more homogeneous than other systems, with only one or two dominant forms. Additionally, these glycan profiles tend to remain stable when the process and cultivation conditions are changed, making plant cells an ideal expression system to produce recombinant glycoproteins with uniform glycan profiles in a consistent manner. This chapter describes a protocol that uses fermentations using plant cell cultures to produce glycosylated proteins using two different types of bioreactors, a classical autoclavable STR 3-L and a wave reactor.
Asunto(s)
Glicoproteínas/metabolismo , Células Vegetales/metabolismo , Proteínas Recombinantes/metabolismo , Reactores Biológicos , Técnicas de Cultivo de Célula , Fermentación/fisiología , Glicosilación , Semivida , Polisacáridos/metabolismoRESUMEN
Transient expression systems allow the rapid production of recombinant proteins in plants. Such systems can be scaled up to several hundred kilograms of biomass, making them suitable for the production of pharmaceutical proteins required at short notice, such as emergency vaccines. However, large-scale transient expression requires the production of recombinant Agrobacterium tumefaciens strains with the capacity for efficient gene transfer to plant cells. The complex media often used for the cultivation of this species typically include animal-derived ingredients that can contain human pathogens, thus conflicting with the requirements of good manufacturing practice (GMP). We replaced all the animal-derived components in yeast extract broth (YEB) cultivation medium with soybean peptone, and then used a design-of-experiments approach to optimize the medium composition, increasing the biomass yield while maintaining high levels of transient expression in subsequent infiltration experiments. The resulting plant peptone Agrobacterium medium (PAM) achieved a two-fold increase in OD600 compared to YEB medium during a 4-L batch fermentation lasting 18 h. Furthermore, the yields of the monoclonal antibody 2G12 and the fluorescent protein DsRed were maintained when the cells were cultivated in PAM rather than YEB. We have thus demonstrated a simple, efficient and scalable method for medium optimization that reduces process time and costs. The final optimized medium for the cultivation of A. tumefaciens completely lacks animal-derived components, thus facilitating the GMP-compliant large-scale transient expression of recombinant proteins in plants.
Asunto(s)
Agrobacterium tumefaciens/genética , Medio de Cultivo Libre de Suero/farmacología , Nicotiana/genética , Biosíntesis de Proteínas/genética , Técnicas de Cultivo de Célula , Regulación de la Expresión Génica de las Plantas/efectos de los fármacos , Humanos , Proteínas Luminiscentes/química , Plantas Modificadas Genéticamente , Proteínas Recombinantes/genética , Nicotiana/crecimiento & desarrolloRESUMEN
Pichia pastoris is a simple and powerful expression platform that has the ability to produce a wide variety of recombinant proteins, ranging from simple peptides to complex membrane proteins. A well-established fermentation strategy is available comprising three main phases: a batch phase, followed by a glycerol fed-batch phase that increases cell density, and finally an induction phase for product expression using methanol as the inducer. We previously used this three-phase strategy at the 15-L scale to express three different AMA1-DiCo-based malaria vaccine candidates to develop a vaccine cocktail. For two candidates, we switched to a two-phase strategy lacking the intermediate glycerol fed-batch phase. The new strategy not only provided a more convenient process flow but also achieved 1.5-fold and 2.5-fold higher space-time yields for the two candidates, respectively, and simultaneously reduced the final cell mass by a factor of 1.3, thus simplifying solid-liquid separation. This strategy also reduced the quantity of host cell proteins that remained to be separated from the two vaccine candidates (by 34% and 13%, respectively), thus reducing the effort required in the subsequent purification steps. Taken together, our new fermentation strategy increased the overall fermentation performance for the production of two different AMA1-DiCo-based vaccine candidates.
Asunto(s)
Antígenos de Protozoos/metabolismo , Biotecnología/métodos , Vacunas contra la Malaria/metabolismo , Proteínas de la Membrana/metabolismo , Pichia/metabolismo , Proteínas Protozoarias/metabolismo , Tecnología Farmacéutica/métodos , Antígenos de Protozoos/genética , Fermentación , Vacunas contra la Malaria/genética , Proteínas de la Membrana/genética , Pichia/genética , Proteínas Protozoarias/genética , Vacunas Sintéticas/genética , Vacunas Sintéticas/metabolismoRESUMEN
The production of biopharmaceutical proteins in plants requires efficient downstream processing steps that remove impurities such as host cell proteins (HCPs) and adventitious endotoxins produced by bacteria during transient expression. We therefore strived to develop effective routines for endotoxin removal from plant extracts and the subsequent use of the extracts to generate antibodies detecting a broad set of HCPs. At first, we depleted the superabundant protein ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) for which PEG precipitation achieved the best results, preventing a dominant immune reaction against this protein. We found that a mixture of sera from rabbits immunized with pre-depleted or post-depleted extracts detected more HCPs than the individual sera used alone. We also developed a powerful endotoxin removal procedure using Polymyxin B for extracts from wild type plants or a combination of fiber-flow filtration and EndoTrap Blue for tobacco plants infiltrated with Agrobacterium tumefaciens. The antibodies we generated will be useful for quality and performance assessment in future process development and the methods we present can easily be transferred to other expression systems rendering them useful in the field of plant molecular farming.
Asunto(s)
Anticuerpos Monoclonales/metabolismo , Nicotiana/genética , Extractos Vegetales/inmunología , Polimixina B/aislamiento & purificación , Ribulosa-Bifosfato Carboxilasa/deficiencia , Agrobacterium tumefaciens/metabolismo , Animales , Especificidad de Anticuerpos , Endotoxinas , Extractos Vegetales/química , Extractos Vegetales/aislamiento & purificación , Plantas Modificadas Genéticamente/enzimología , Plantas Modificadas Genéticamente/microbiología , Conejos , Nicotiana/inmunología , Nicotiana/microbiologíaRESUMEN
Plants provide multiple benefits for the production of biopharmaceuticals including low costs, scalability, and safety. Transient expression offers the additional advantage of short development and production times, but expression levels can vary significantly between batches thus giving rise to regulatory concerns in the context of good manufacturing practice. We used a design of experiments (DoE) approach to determine the impact of major factors such as regulatory elements in the expression construct, plant growth and development parameters, and the incubation conditions during expression, on the variability of expression between batches. We tested plants expressing a model anti-HIV monoclonal antibody (2G12) and a fluorescent marker protein (DsRed). We discuss the rationale for selecting certain properties of the model and identify its potential limitations. The general approach can easily be transferred to other problems because the principles of the model are broadly applicable: knowledge-based parameter selection, complexity reduction by splitting the initial problem into smaller modules, software-guided setup of optimal experiment combinations and step-wise design augmentation. Therefore, the methodology is not only useful for characterizing protein expression in plants but also for the investigation of other complex systems lacking a mechanistic description. The predictive equations describing the interconnectivity between parameters can be used to establish mechanistic models for other complex systems.
Asunto(s)
Biotecnología/métodos , Nicotiana/genética , Nicotiana/metabolismo , Elementos Reguladores de la Transcripción , Transgenes , Anticuerpos Monoclonales/biosíntesis , Anticuerpos Monoclonales/genética , Proyectos de InvestigaciónRESUMEN
All biological platforms for the manufacture of biopharmaceutical proteins produce an initially turbid extract that must be clarified to avoid fouling sensitive media such as chromatography resins. Clarification is more challenging if the feed stream contains large amounts of dispersed particles, because these rapidly clog the filter media typically used to remove suspended solids. Charged polymers (flocculants) can increase the apparent size of the dispersed particles by aggregation, facilitating the separation of solids and liquids, and thus reducing process costs. However, many different factors can affect the behavior of flocculants, including the pH and conductivity of the medium, the size and charge distribution of the particulates, and the charge density and molecular mass of the polymer. Importantly, these properties can also affect the recovery of the target protein and the overall safety profile of the process. We therefore used a design of experiments approach to establish reliable predictive models that characterize the impact of flocculants during the downstream processing of biopharmaceutical proteins. We highlight strategies for the selection of flocculants during process optimization. These strategies will contribute to the quality by design aspects of process development and facilitate the development of safe and efficient downstream processes for plant-derived pharmaceutical proteins.