Stability of adsorption of Mg and Na on sulfur-functionalized MXenes.

Two-dimensional materials composed of transition metal carbides and nitrides (MXenes) are poised to revolutionize energy conversion and storage. In this work, we used density functional theory (DFT) to investigate the adsorption of Mg and Na adatoms on five M2CS2 monolayers (where M = Mo, Nb, Ti, V, and Zr) for battery applications. We assessed the stability of the adatom (i.e. Na and Mg)-monolayer systems by calculating adsorption and formation energies, as well as voltages as a function of surface coverage. For instance, we found that Mo2CS2 cannot support a full layer of Na nor even a single Mg atom. Na and Mg exhibit the strongest binding on Zr2CS2, followed by Ti2CS2, Nb2CS2 and V2CS2. Using the nudged elastic band method (NEB), we computed promising diffusion barriers for both dilute and nearly full ion surface coverage cases. In the dilute ion adsorption case, a single Mg and Na atom on Ti2CS2 experience ∼0.47 eV and ∼0.10 eV diffusion barriers between the lowest energy sites, respectively. For a nearly full surface coverage, a Na ion moving on Ti2CS2 experiences a ∼0.33 eV energy barrier, implying a concentration-dependent diffusion barrier. Our molecular dynamics results indicate that the three (one) layers (layer) of the Mg (Na) ion on both surfaces of Ti2CS2 remain stable at T = 300 K. While, according to voltage calculations, Zr2CS2 can store Na up to three atomic layers, our MD simulations predict that the outermost layers detach from the Zr2CS2 monolayer due to the weak interaction between Na ions and the monolayer. This suggests that MD simulations are essential to confirm the stability of an ion-electrode system - an insight that is mostly absent in previous studies.

Histopathology of ipsilateral and contralateral ovaries and plasma interleukin 6 levels after unilateral ovarian torsion.

OBJECTIVE: The aim of the present study was to evaluate the time-dependent histopathologic changes in both ovaries and to determine the time-dependent levels of plasma interleukin 6 (IL-6) after unilateral ovarian torsion. MATERIALS AND METHODS: An experimental animal study included 48 female Sprague-Dawley rats which were distributed to six groups: control group (Group 1), sham-operated control group (Group 2), and four unilateral ovarian torsion groups with torsion duration of three, six, 12, and 24 hours (Group 3, 4, 5, and 6, respectively). Histopathologic criteria (follicular degeneration, vascular congestion, hemorrhage, inflammatory cell infiltration, and total tissue damage score) were evaluated in both ovaries, and plasma IL-6 levels were measured. RESULTS: At 24 hours after torsion began, mean total tissue damage score was similar between ovaries that had torsion and contralateral ovaries. Mean plasma IL-6 level did not change during the 24 hours after torsion began (p = 0.584). CONCLUSIONS: In addition to ovaries that had torsion, histopathologic abnormalities also occurred in contralateral ovaries. These results suggest that contralateral ovaries are not quiescent after unilateral ovarian torsion. Plasma IL-6 levels did not change significantly during the 24 hours after ovarian torsion began, resulting in a limitation of its diagnostic use in the early course of the disease.

The effect of maternal polycystic ovary morphology on first-trimester maternal serum biochemical markers of aneuploidy and fetal nuchal translucency thickness.

OBJECTIVE: To evaluate the effect of maternal polycystic ovary (PCO) morphology on maternal serum free beta-human chorionic gonadotropin (ß-hCG), pregnancy associated plasma protein A (PAPP-A), and nuchal translucency (NT) thickness in the first-trimester. MATERIAL AND METHODS: A total of 92 pregnant women in the first-trimester were included in the study. Of them, 57 had PCO morphology, and 35 women constituted the control group, with apparently normal ovaries. Maternal serum free ß-hCG, PAPP-A, and NT thickness were measured and compared in all patients. RESULTS: The multiples of median (MoM) levels of serum free ß-hCG were significantly higher in the PCO morphology group compared to the normal ovary group (p = 0.024). However, the MoM levels of PAPP-A were similar in both groups (p = 0.947). No difference was found between the groups in terms of fasting glucose levels and NT measurements (p = 0.976 and 0.565, respectively). CONCLUSION: In pregnancies with maternal PCO morphology, the presence of higher maternal serum free ß-hCG levels may require correction in the calculation of risks related to first-trimester screening for chromosomal abnormalities. Larger studies are needed to confirm our preliminary data.

Effect of light activation on resin-modified glass ionomer shear bond strength.

OBJECTIVE: Recent studies confirmed that resin-modified glass ionomers (RMGIs) set on the basis of two competing mechanisms, an acid-base reaction and a light-activated resin polymerization. This study evaluated the effect of the setting mechanism on bond strength by measuring the shear bond strength of three RMGIs to dentin with and without light activation. METHODS: Sixty human molars were ground to midcoronal dentin and randomly divided into six even groups: 1) Ketac Nano (KN), 2) KN without light cure (woLC), 3) Fuji Filling LC (FF), 4) FF woLC, 5) Fuji II LC (FII), and 6) FII woLC. The dentin surfaces of the specimens were conditioned/primed according to the manufacturers' instructions. A 1.54-mm diameter plastic tube was filled with RMGI material and affixed to the dentin surface. Groups 1, 3, and 5 were light cured for 20 seconds, and groups 2, 4, and 6 were immediately placed in a damp dark box with no light curing at 37°C for 24 hours. Shear bond strength testing was performed in an Instron device at 1 mm/min. Data were analyzed with a one-way analysis of variance (ANOVA) and Tukey/Kramer test (α=0.05). RESULTS: Mean ± standard deviation shear bond strength values (MPa) are: 7.1 ± 4.2 (KN), 11.7 ± 3.9 (FF), 10.2 ± 3.2 (FF woLC), 12.5 ± 5.1 (FII), and 0.3 ± 0.4 (FII woLC). Two KN, all KN woLC, and seven FII woLC specimens debonded before testing. Tukey/Kramer analysis revealed no significant differences in bond strength between the three light-cured RMGIs. KN and FII showed significantly lower bond strength without light cure, but no significant difference was observed between FF and FF woLC. CONCLUSIONS: The results of this study strongly suggest that light activation is necessary to obtain optimal bond strength between RMGI and dentin. FF may contain components that chemically activate resin polymerization. Clinically, KN and FII need to be light cured after placement of these RMGIs.

Comprehensive Study of Lithium Adsorption and Diffusion on Janus Mo/WXY (X, Y = S, Se, Te) Using First-Principles and Machine Learning Approaches.

The structural asymmetry of two-dimensional (2D) Janus transition-metal dichalcogenides (TMDs) produces internal dipole moments that result in interesting electronic properties. These properties differ from the regular (symmetric) TMD structures that the Janus structures are derived from. In this study, we, first, examine adsorption and diffusion of a single Li atom on regular MX2 and Janus MXY (M = Mo, W; XY = S, Se, Te) TMD structures at various concentrations using first-principles calculations within density functional theory. Lithium adsorption energy and mobility differ on the top and bottom sides of each Janus material. The correlation between Li adsorption energy, charge transfer, and bond lengths at different coverage densities is carefully examined. To gain more physical insight and prepare for future investigations into regular TMD and Janus materials, we applied a supervised machine learning (ML) model that uses clusterwise linear regression to predict the adsorption energies of Li on top of 2D TMDs. We developed a universal representation with a few descriptors that take into account the intrinsic dipole moment and the electronic structure of regular and Janus 2D layers, the side where the adsorption takes place, and the concentration dependence of adatom doping. This representation can easily be generalized to be used for other impurities and 2D layer combinations, including alloys as well. At last, we focus on analyzing these structures as possible anodes in battery applications. We conducted Li diffusion, open-circuit voltage, and storage capacity simulations. We report that lithium atoms are found to easily migrate between transition-metal (Mo, W) top sites for each considered case, and in these respects, many of the examined Janus materials are comparable or superior to graphene and regular TMDs. In addition, we report that the side with higher electronegative chalcogen atoms is suitable for Li adsorption and only MoSSe and MoSeTe can be suitable for full coverage of Li atoms on the surface. Bilayer Li adsorption was hindered due to negative open-circuit voltage. Bilayer Janus structures are better suited for battery applications due to less volumetric expansion/contraction during the discharge/charge process and having higher storage capacity. Janus monolayers undergo a transition from semiconducting to metallic upon adsorption of a single Li ion, which would improve anode conductivity. The results imply that the examined Janus structures should perform well as electrodes in Li-ion batteries.

Subclinical neurological abnormalities in children with celiac disease receiving a gluten-free diet.

OBJECTIVES: Because clinically evident manifestations are frequent in adults with celiac disease (CD), we aimed to investigate whether early neurological abnormalities may be detected in children with CD. METHODS: Electroencephalography, electromyography, and somatosensory evoked potentials were performed in children with CD receiving a gluten-free diet. RESULTS: The neurophysiological tests revealed subclinical neurological abnormalities associated with CD in 3 (11%) of 27 children: 2 had peripheral polyneuropathy documented with electromyography, and 1 had prolonged latencies in somatosensory evoked potential. Magnetic resonance imaging showed abnormalities in 2 (7.4%) of children: pontine demyelinization in 1 and cortical atrophy in the other. CONCLUSIONS: Because the rate of neurological problems is increased in children with CD, neurological abnormalities should be carefully investigated early after the diagnosis of CD is made.

Simultaneous purification and characterization of cytochrome b5 reductase and cytochrome b5 from sheep liver.

Cytochrome b5 was purified from detergent solubilized sheep liver microsomes by using three successive DEAE-cellulose, and Sephadex G-100 column chromatographies. It was purified 54-fold and the yield was 23.5% with respect to microsomes. The apparent Mr of cytochrome b5 was estimated to be 16,200 +/- 500 by SDS-PAGE. Absolute absorption spectrum of the purified cytochrome b5 showed maximal absorption at 412 nm and dithionite-reduced cytochrome b5 gave peaks at 557, 526.5 and 423 nm. The ability of the purified sheep liver cytochrome b5 to transfer electrons from NADH-cytochrome b5 reductase to cytochrome c was investigated. The K(m) and Vmax values were calculated to be 0.088 microM cytochrome b5 and 315.8 microM cytochrome c reduced/min/mg enzyme, respectively. Also the reduction of cytochrome b5 by reductase was studied and K(m) and Vmax values were determined to be 5 microM cytochrome b5 and 5200 nmol cytochrome b5 reduced/min/mg enzyme, respectively. The K(m) and Vmax values for the cofactor NADH in the presence of saturating concentration of cytochrome b5 were found to be 0.0017 mM NADH and 6944 nmol cytochrome b5 reduced/min/mg enzyme, respectively. NADH-cytochrome b5 reductase was also partially purified from the same source, detergent solubilized sheep liver microsomes, by using two successive DEAE-cellulose, and 5'-ADP-agarose affinity column chromatographies. It was purified 144-fold and the yield was 7% with respect to microsomes. The apparent monomer Mr of reductase was estimated to be 34,000 by SDS-PAGE. When ferricyanide was used as an electron acceptor, reductase showed maximum activity between 6.8 and 7.5. The K(m) and Vmax values of the enzyme for ferricyanide were calculated as 0.024 mM ferricyanide and 673 mumol ferricyanide reduced/min/mg enzyme, respectively. The K(m) and Vmax values for the cofactor NADH in the presence of saturating amounts of ferricyanide were found to be 0.020 mM NADH and 699 mumol ferricyanide reduced/min/mg enzyme, respectively.

Enamel wear opposing polished and aged zirconia.

Aging of dental zirconia roughens its surface through low temperature degradation. We hypothesized that age-related roughening of zirconia crowns may cause detrimental wear to the enamel of an opposing tooth. To test our hypothesis, we subjected artificially aged zirconia and reference specimens to simulated mastication in a wear device and measured the wear of an opposing enamel cusp. Additionally, the roughness of the pretest surfaces was measured. The zirconia specimens, artificially aged by autoclave, showed no significant increase in roughness compared to the nonaged specimens. Furthermore, no significant difference in material or opposing enamel wear between the aged and nonaged zirconia was seen. All zirconia specimens showed less material and opposing enamel wear than the enamel to enamel control or veneering porcelain specimens. Scanning electron micrographs showed relatively smooth surfaces of aged and nonaged zirconia following wear testing. The micrographs of the veneering ceramic showed sharp fractured edges and fragments of wear debris. Zirconia may be considered a wear-friendly material for restorations opposing enamel, even after simulated aging.

Clinical evaluation of self-etch and total-etch adhesive systems in noncarious cervical lesions: a two-year report.

OBJECTIVE: The purpose of this study was to compare the clinical performance of two self-etch dental adhesives with Single Bond Plus, a traditional one-bottle total-etch dental adhesive, for the restoration of noncarious cervical lesions. MATERIALS AND METHODS: A total of 156 restorations were placed in noncarious cervical lesions with a minimum depth of 1.5 mm. Patients had no chronic periodontal disease and had normal salivary function. Each patient received restorations on three teeth, each bonded with either Adper Single Bond Plus, Adper Easy Bond, or Adper Scotchbond SE dental adhesive. All lesions were restored with Filtek Supreme Plus composite resin. All teeth were isolated with a rubber dam, received a short enamel bevel, and were cleaned with flour of pumice. The adhesives and resin composite were applied following the manufacturers' instructions. Restorations were clinically evaluated at baseline, six months, one year, and two years using modified US Public Health Service criteria. RESULTS: Two-year retention was recorded as 97.3%, 90.5%, and 95.2%, for Single Bond Plus, Scotchbond SE, and Easy Bond, respectively. Statistical analysis did not show a significant difference (p>0.05) in clinical performance between any of the three adhesives after a period of two years.

Ab initio study of neutral (TiO2)n clusters and their interactions with water and transition metal atoms.

We have systematically investigated the growth behavior and stability of small stoichiometric (TiO(2))(n) (n = 1-10) clusters as well as their structural, electronic and magnetic properties by using the first-principles plane wave pseudopotential method within density functional theory. In order to find out the ground state geometries, a large number of initial cluster structures for each n has been searched via total energy calculations. Generally, the ground state structures for the case of n = 1-9 clusters have at least one monovalent O atom, which only binds to a single Ti atom. However, the most stable structure of the n = 10 cluster does not have any monovalent O atom. On the other hand, Ti atoms are at least fourfold coordinated for the ground state structures for n ≥ 4 clusters. Our calculations have revealed that clusters prefer to form three-dimensional structures. Furthermore, all these stoichiometric clusters have nonmagnetic ground state. The formation energy and the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gap for the most stable structure of (TiO(2))(n) clusters for each n have also been calculated. The formation energy and hence the stability increases as the cluster size grows. In addition, the interactions between the ground state structure of the (TiO(2))(n) cluster and a single water molecule have been studied. The binding energy (E(b)) of the H(2)O molecule exhibits an oscillatory behavior with the size of the clusters. A single water molecule preferably binds to the cluster Ti atom through its oxygen atom, resulting an average binding energy of 1.1 eV. We have also reported the interaction of the selected clusters (n = 3, 4, 10) with multiple water molecules. We have found that additional water molecules lead to a decrease in the binding energy of these molecules to the (TiO(2))(n) clusters. Finally, the adsorption of transition metal (TM) atoms (V, Co and Pt) on the n = 10 cluster has been investigated for possible functionalization. All these elements interact strongly with this cluster, and a permanent magnetic moment is induced upon adsorption of Co and V atoms. We have observed gap localized TM states leading to significant HOMO-LUMO gap narrowing, which is essential to achieve visible light response for the efficient use of TiO(2) based materials. In this way, electronic and optical as well as magnetic properties of TiO(2) materials can be modulated by using the appropriate adsorbate atoms.

Evaluation of outgassing, tear strength, and detail reproduction in alginate substitute materials.

OBJECTIVE: To compare three alginate substitute materials to an alginate impression material for cast surface porosity (outgassing), tear strength, and detail reproduction. MATERIALS AND METHODS: Detail reproduction tests were performed following American National Standards Institute/American Dental Association (ANSI/ADA) Specification No. 19. To measure tear strength, 12 samples of each material were made using a split mold, placed in a water bath until testing, and loaded in tension until failure at a rate of 500 mm/min using a universal testing machine. For cast surface porosity testing, five impressions of a Teflon mold with each material were placed in a water bath (37.8°C) for the in-mouth setting time and poured with vacuum-mixed Silky Rock die stone at 5, 10, 30, and 60 minutes from the start of mixing. The gypsum samples were analyzed with a digital microscope for surface porosity indicative of hydrogen gas release by comparing the surface obtained at each interval with four casts representing no, little, some, and significant porosity. Data analysis was performed using parametric and Kruskal-Wallis analysis of variance (ANOVA), Tukey/Kramer post-hoc tests (α=0.05), and individual Mann-Whitney U tests (α=0.0167). RESULTS: All alginate substitute materials passed the detail reproduction test. Tear strength of the alginate substitute materials was significantly better than alginate and formed three statistically different groups: AlgiNot had the lowest tear strength, Algin-X Ultra had the highest tear strength, and Position Penta Quick had intermediate tear strength. Significant variation in outgassing existed between materials and pouring times (p<0.05). All alginate substitute materials exhibited the least outgassing and cast porosity 60 minutes after mixing. CONCLUSIONS: Detail reproduction and tear strength of alginate substitute materials were superior to traditional alginate. The outgassing effect was minimal for most materials tested. Alginate substitute materials are superior replacements for irreversible hydrocolloid.

Half-metallic silicon nanowires: first-principles calculations.

From first-principles calculations, we predict that specific transition metal (TM) atom-adsorbed silicon nanowires have a half-metallic ground state. They are insulators for one spin direction, but show metallic properties for the opposite spin direction. At high coverage of TM atoms, ferromagnetic silicon nanowires become metallic for both spin directions with high magnetic moment and may have also significant spin polarization at the Fermi level. The spin-dependent electronic properties can be engineered by changing the type of adsorbed TM atoms, as well as the diameter of the nanowire. Present results are not only of scientific interest, but also can initiate new research on spintronic applications of silicon nanowires.

Effects of seasonal and physiological variations on the serum chemistry, vitamins and thyroid hormone concentrations in sheep.

The aim of this study was to investigate the possible effects of the reproductive status and seasonal variations on the serum chemistry and vitamin status and their relationships with the thyroid hormones in Sakiz-Awassi crossbreed sheep. The sheep (n = 34) were divided into two groups. The first group (n = 22) was mated; the second group (n = 12) was not mated. Their serum samples were collected four times a year at the each season and under reproductive status. The periods are 1, early pregnancy (October); 2, late pregnancy (January); 3, lactation (April); and 4, dry season (July). The results of this study indicated that (1) total protein (TP), globulin, cholesterol, creatinine, uric acid and T4/T3 vary with reproductive status but not seasonal variations; (2) alanine aminotransferase, T4, fT4 concentrations in serum vary only with reproductive status; (3) the urea, creatine kinase, lactate dehydrogenase, alkaline phosphatase, aspartate aminotransferase, amylase, albumin, triglyceride, VLDL, Vit A-E, T3 and fT3 concentration could vary with both reproductive status and seasonal variations; (4) the glucose, gamma-glutamyl transpeptidase, folate concentrations were altered neither season of the year nor the reproductive status; (5) a single reference interval for folate, gamma-glutamyl transpeptidase (GGT), glucose, TP, globulin, cholesterol, creatinine, uric acid and T4/T3 can be used for both mated and non-mated sheep because of no differences were found due to the reproductive status. Taking the results together suggests that reproductive status and seasonal variations have to be taken into consideration for a correct interpretation of the serum chemistry values of sheep. Nutritional supplements are required for sheep during certain periods to avoid a decline of their performance, which would then represent consequent economic, loses.

Clinicopathologic correlations of Henoch-Schönlein nephritis in Turkish children.

BACKGROUND: In this study, 66 patients with Henoch-Schönlein nephritis (HSN) were investigated clinicopathologically. METHODS: The patients were classified according to their initial presentation, histologic findings, recurrences of purpura, type of treatment and clinical outcome. Logistic regression analysis was performed. RESULTS: Sixty-eight percent of patients were hospitalized with mild renal disease. Most patients were evaluated as class I and II according to light microscopy. In addition to IgA deposition alone, 33% of patients showed IgA + C3 and 27% had IgA + IgG + C3 depositions. After the follow-up period of 3.3 years, 15 patients had minor urinary findings, 4 had active renal disease and 1 had renal insufficiency. Recurrences occurred in 37.9% of patients and 37.1% of patients with recurrences had persistent pathologic findings. Symptomatic treatment was given to 51.5% of patients, while 27.2% were given corticotherapy. CONCLUSIONS: Clinical presentation was found to be correlated with outcome. Recurrence of the disease and the type of the treatment also affected the outcome. It was also thought that mesangial IgG and C3 depositions may have a role in the pathogenesis of renal damage in HSN.