Metal-Sulfur Interfaces as the Primary Active Sites for Catalytic Hydrogenations.

The determination of catalytically active sites is crucial for understanding the catalytic mechanism and providing guidelines for the design of more efficient catalysts. However, the complex structure of supported metal nanocatalysts (e.g., support, metal surface, and metal-support interface) still presents a big challenge. In particular, many studies have demonstrated that metal-support interfaces could also act as the primary active sites in catalytic reactions, which is well elucidated in oxide-supported metal nanocatalysts but is rarely reported in carbon-supported metal nanocatalysts. Here, we fill the above gap and demonstrate that metal-sulfur interfaces in sulfur-doped carbon-supported metal nanocatalysts are the primary active sites for several catalytic hydrogenation reactions. A series of metal nanocatalysts with similar sizes but different amounts of metal-sulfur interfaces were first constructed and characterized. Taking Ir for quinoline hydrogenation as an example, it was found that their catalytic activities were proportional to the amount of the Ir-S interface. Further experiments and density functional theory (DFT) calculations suggested that the adsorption and activation of quinoline occurred on the Ir atoms at the Ir-S interface. Similar phenomena were found in p-chloronitrobenzene hydrogenation over the Pt-S interface and benzoic acid hydrogenation over the Ru-S interface. All of these findings verify the predominant activity of metal-sulfur interfaces for catalytic hydrogenation reactions and contribute to the comprehensive understanding of metal-support interfaces in supported nanocatalysts.

Electronic Oxide-Support Strong Interactions in the Graphdiyne-Supported Cuprous Oxide Nanocluster Catalyst.

The interfacial interaction in supported catalysts is of great significance for heterogeneous catalysis because it can induce charge transfer, regulate electronic structure of active sites, influence reactant adsorption behavior, and eventually affect the catalytic performance. It has been theoretically and experimentally elucidated well in metal/oxide catalysts and oxide/metal inverse catalysts, but is rarely reported in carbon-supported catalysts due to the inertness of traditional carbon materials. Using an example of a graphdiyne-supported cuprous oxide nanocluster catalyst (Cu2O NCs/GDY), we herein demonstrate the strong electronic interaction between them and put forward a new type of electronic oxide-graphdiyne strong interaction, analogous to the concept of electronic oxide/metal strong interactions in oxide/metal inverse catalysts. Such electronic oxide-graphdiyne strong interaction can not only stabilize Cu2O NCs in a low-oxidation state without aggregation and oxidation under ambient conditions but also change their electronic structure, resulting in the optimized adsorption energy for reactants/intermediates and thus leading to improved catalytic activity in the Cu(I)-catalyzed azide-alkyne cycloaddition reaction. Our study will contribute to the comprehensive understanding of interfacial interactions in supported catalysts.

Sabatier Phenomenon in Hydrogenation Reactions Induced by Single-Atom Density.

The Sabatier principle is a fundamental concept in heterogeneous catalysis that provides guidance for designing optimal catalysts with the highest activities. For the first time, we here report a new Sabatier phenomenon in hydrogenation reactions induced by single-atom density at the atomic scale. We produce a series of Ir single-atom catalysts (SACs) with a predominantly Ir1-P4 coordination structure with densities ranging from 0.1 to 1.7 atoms/nm2 through a P-coordination strategy. When used as the catalysts for hydrogenation, a volcano-type relationship between Ir single-atom density and hydrogenation activity emerges, with a summit at a moderate density of 0.7 atoms/nm2. Mechanistic studies show that the balance between adsorption and desorption strength of the activated H* on Ir single atoms is found to be a key factor for the Sabatier phenomenon. The transferred Bader charge on these Ir SACs is proposed as a descriptor to interpret the structure-activity relationship. In addition, the maximum activity and selectivity can be simultaneously achieved in chemoselective hydrogenation reactions with the optimized catalyst due to the uniform geometric and electronic structures of single sites in SACs. The present study reveals the Sabatier principle as an insightful guidance for the rational design of more efficient and practicable SACs for hydrogenation reactions.

Boosting Chemoselective Hydrogenation of Nitroaromatic via Synergy of Hydrogen Spillover and Preferential Adsorption on Magnetically Recoverable Pt@Fe2 O3.

It is highly desired but challenging to design high performance catalyst for selective hydrogenation of nitro compounds into amino compounds. Herein, a boosting chemoselective hydrogenation strategy on Pt@Fe2 O3 is proposed with gradient oxygen vacancy by synergy of hydrogen spillover and preferential adsorption. Experimental and theoretical investigations reveal that the nitro is preferentially adsorbed onto oxygen vacancy of Pt@Fe2 O3 , meanwhile, the H2 dissociated on Pt nanoparticles and then spillover to approach the nitro for selective hydrogenation (>99% conversion of 4-nitrostyrene, > 99% selectivity of 4-aminostyrene, TOF of 2351 h-1 ). Moreover, the iron oxide support endows the catalyst magnetic retrievability. This high activity, selectivity, and easy recovery strategy provide a promising avenue for selective hydrogenation catalysis of various nitroaromatic.

High-Performance Heterogeneous Thermocatalysis Caused by Catalyst Wettability Regulation.

Catalyst wettability regulation has emerged as an attractive approach for high catalytic performance for the past few years. By introducing appropriate wettability, the molecule diffusion of reactants and products can be enhanced, leading to high activity. Besides this, undesired molecules are isolated for high selectivity of target products and long-term stability of catalyst. Herein, we summarize wettability-induced high-performance heterogeneous thermocatalysis in recent years, including hydrophilicity, hydrophobicity, hybrid hydrophilicity-hydrophobicity, amphiphilicity, and superaerophilicity. Relevant reactions are further classified and described according to the reason for the performance improvement. It should be pointed out that studies of utilizing superaerophilicity to improve heterogeneous thermocatalytic performance have been included for the first time, so this is a comparatively comprehensive review in this field as yet.

Graphdiyne Nanospheres as a Wettability and Electron Modifier for Enhanced Hydrogenation Catalysis.

Owing to unique alkyne-rich structure, graphdiyne (GDY) has been proven to be a superb support for anchoring metal catalysts. Herein we demonstrate a new role of GDY as the wettability modifier for enhanced hydrogenation catalysis. After loading a certain amount GDY nanospheres, the silica mesoporous channels become superaerophilic, which allows gaseous H2 to be directly stored inside, thus significantly increasing the H2 concentration around the palladium nanoparticles (NPs). At the same time, GDY nanospheres also alter the electronic structure of the Pd NPs via a strong d-π interaction. Combining these two roles of GDY, allows the hydrogenation of benzaldehyde to proceed under ambient H2 pressure in water, with an impressive 4.3-fold enhancement compared to the unmodified Pd/mSiO2 catalyst. This study demonstrates a new role of GDY in constructing wettability matched catalysts for gas-liquid-solid tri-phase reactions.

Direct Observation of Metal Oxide Nanoparticles Being Transformed into Metal Single Atoms with Oxygen-Coordinated Structure and High-Loadings.

Direct conversion of bulk metal or nanoparticles into metal single atoms under thermal pyrolysis conditions is a highly efficient and promising strategy to fabricate single-atom catalysts (SACs). Usually, nitrogen-doped carbon is used as the anchoring substrate to capture the migrating metal ion species at high temperatures, and stable isolated SACs with nitrogen coordination are formed during the process. Herein, we report unexpected oxygen-coordinated metal single-atom catalysts (Fe-, Co-, Ni-, Mn-SACs) with high loadings (above 10 wt %) through direct transformation of metal oxide nanoparticles (Fe-, Co-, Ni-, Mn-NPs) in an inert atmosphere at 750 °C for 2 h. The atomic dispersion of metal single atoms and their coordinated structures were confirmed by aberration-corrected scanning transmission electron microscopy and X-ray absorption fine structures. In addition, the dynamic process of nanoparticles to atoms was directly observed by in situ transmission electron microscopy. The as-prepared Fe SAC exhibited high activity and superior selectivity for catalytic oxidation of benzene to phenol with hydrogen peroxide.

Single Chromium Atoms Supported on Titanium Dioxide Nanoparticles for Synergic Catalytic Methane Conversion under Mild Conditions.

Direct conversion of methane to value-added chemicals with high selectivity under mild conditions remains a great challenge in catalysis. Now, single chromium atoms supported on titanium dioxide nanoparticles are reported as an efficient heterogeneous catalyst for direct methane oxidation to C1 oxygenated products with H2 O2 as oxidant under mild conditions. The highest yield for C1 oxygenated products can be reached as 57.9 mol molCr -1 with selectivity of around 93 % at 50 °C for 20 h, which is significantly higher than those of most reported catalysts. The superior catalytic performance can be attributed to the synergistic effect between single Cr atoms and TiO2 support. Combining catalytic kinetics, electron paramagnetic resonance, and control experiment results, the methane conversion mechanism was proposed as a methyl radical pathway to form CH3 OH and CH3 OOH first, and then the generated CH3 OH is further oxidized to HOCH2 OOH and HCOOH.

Preparation of Ga2O3 Doped Sulfonated Tin Oxides as a Highly Active and Recyclable Heterogeneous Solid Acid Catalyst for Aldol Reactions.

Ga2O3 doped sulfonated tin oxide catalysts were prepared via co-condensation method in ethanol solvent, followed by sulfonation and calcination. The samples were characterized by isothermal nitrogen adsorption/desorption, powder X-ray diffraction (XRD), thermal gravimetric analysis (TG), Raman spectra and DRIFT spectra. The number of acid sites on the catalysts was measured with the potentiometric titration of butyl amine. The results showed that the addition of small amounts of Ga2O3 to sulfonated tin oxide resulted in an enhanced acid site density, which makes Ga2O3 doped sulfonated tin oxide catalysts highly active for aldol reactions. The catalyst containing 1.5% Ga2O3 exhibited much higher activity than those of SO4²-/SnO2, SO4²-/ZrO2 and H3PO4 in aldol condensation of prenal and prenol for citral precursor, which is a important in fragrance industry. Besides the high activity, the catalyst also exhibited good recyclability, making 1.5% GST an efficient and promising solid catalyst for aldol reactions.

Application of flowerlike MgO for highly sensitive determination of lead via matrix-assisted laser desorption/ionization mass spectrometry.

RATIONALE: Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) is a high-throughput method to achieve fast and accurate identification of lead (Pb) exposure, but is seldom used because of low ionization efficiency and insufficient sensitivity. Nanomaterials applied in MS are a promising technique to overcome the obstacles of MALDI. METHODS: Flowerlike MgO nanostructures are applied for highly sensitive lead profiling in real samples. They can be used in two ways: (a) MgO is mixed with N-naphthylethylenediamine dihydrochloride (NEDC) as a novel matrix MgO/NEDC; (b) MgO is applied as an absorbent to enrich Pb ions in very dilute solution. RESULTS: The signal intensities of lead by MgO/NEDC were ten times higher than the NEDC matrix. It also shows superior anti-interference ability when analyzing 10 µmol/L Pb ions in the presence of organic substances or interfering metal ions. By applying MgO as adsorbent, the LOD of lead before enrichment is 1 nmol/L. Blood lead test can be achieved using this enrichment process. Besides, MgO can play the role of internal standard to achieve quantitative analysis. CONCLUSIONS: Flowerlike MgO nanostructures were applied for highly sensitive lead profiling in real samples. The method is helpful to prevent Pb contamination in a wide range. Further, the combination of MgO with MALDI MS could inspire more nanomaterials being applied in highly sensitive profiling of pollutants. Copyright © 2016 John Wiley & Sons, Ltd.

Nitrogen, Phosphorus, and Sulfur Co-Doped Hollow Carbon Shell as Superior Metal-Free Catalyst for Selective Oxidation of Aromatic Alkanes.

Metal-free heteroatom-doped carbocatalysts with a high surface area are desirable for catalytic reactions. In this study, we found an efficient strategy to prepare nitrogen, phosphorus, and sulfur co-doped hollow carbon shells (denote as NPS-HCS) with a surface area of 1020 m(2) g(-1). Using a poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol) (PZS) shell as carbon source and N, P, S-doping source, and the ZIF-67 core as structural template as well as extra N-doping source, NPS-HCS were obtained with a high surface area and superhydrophilicity. All these features render the prepared NPS-HCS a superior metal-free carbocatalyst for the selective oxidation of aromatic alkanes in aqueous solution. This study provides a reliable and facile route to prepare doped carbocatalysts with enhanced catalytic properties.

Nanoscale magnetic stirring bars for heterogeneous catalysis in microscopic systems.

Nanometer-sized magnetic stirring bars containing Pd nanoparticles (denoted as Fe3 O4 -NC-PZS-Pd) for heterogeneous catalysis in microscopic system were prepared through a facile two-step process. In the hydrogenation of styrene, Fe3 O4 -NC-PZS-Pd showed an activity similar to that of the commercial Pd/C catalyst, but much better stability. In microscopic catalytic systems, Fe3 O4 -NC-PZS-Pd can effectively stir the reaction solution within microdrops to accelerate mass transfer, and displays far better catalytic activity than the commercial Pd/C for the hydrogenation of methylene blue in an array of microdroplets. These results suggested that the Fe3 O4 -NC-PZS-Pd could be used as nanoscale stirring bars in nanoreactors.

Tunable synthesis of hexagram-shaped hematite iron oxide microcrystals with shape-dependent magnetic properties.

Uniform hexagram-shaped alpha-Fe2O3 microcrystals with tunable morphologies were fabricated by a facile hydrothermal method followed by annealing in air. The highly anisotropic hexagram-shaped alpha-Fe2O3 particles with the higher coercivity forces and remannent magnetizations showed weak ferromagnetic behaviors at room temperature and displayed the typical shape-dependent magnetic behaviors.

Confinement-Induced Biocatalytic Activity Enhancement of Light- and Thermoresponsive Polymer@Enzyme@MOF Composites.

Metal-organic frameworks (MOFs) are favorable hosting materials for fixing enzymes to construct enzyme@MOF composites and to expand the applications of biocatalysts. However, the rigid structure of MOFs without tunable hollow voids and a confinement effect often limits their catalytic activities. Taking advantage of the smart soft polymers to overcome the limitation, herein, a protection protocol to encapsulate the enzyme in zeolitic imidazolate framework-8 (ZIF-8) was developed using a glutathione-sensitive liposome (L) as a soft template. Glucose oxidase (GOx) and horseradish peroxidase (HRP) were first anchored on a light- and thermoresponsive porous poly(styrene-maleic anhydride-N,N-dimethylaminoethyl methacrylate-spiropyran) membrane (PSMDSP) to produce PSMDSP@GOx-HRP, which could provide a confinement effect by switching the UV irradiation or varying the temperature. Afterward, embedding PSMDSP@GOx-HRP in L and encapsulating PSMDSP@GOx-HRP@L into hollow ZIF-8 (HZIF-8) to form PSMDSP@GOx-HRP@HZIF-8 composites were performed, which proceeded during the crystallization of the framework following the removal of L by adding glutathione. Impressively, the biocatalytic activity of the composites was 4.45-fold higher than that of the free enzyme under UV irradiation at 47 °C, which could benefit from the confinement effect of PSMDSP and the conformational freedom of the enzyme in HZIF-8. The proposed composites contributed to the protection of the enzyme against harsh conditions and exhibited superior stability. Furthermore, a colorimetric assay based on the composites for the detection of serum glucose was established with a linearity range of 0.05-5.0 mM, and the calculated LOD value was 0.001 mM in a cascade reaction system. This work provides a universal design idea and a versatile technique to immobilize enzymes on soft polymer membranes that can be encapsulated in porous rigid MOF-hosts. It also holds potential for the development of smart polymer@enzyme@HMOFs biocatalysts with a tunable confinement effect and high catalytic performance.

α-Fe2 O3 nanodisks: layered structure, growth mechanism, and enhanced photocatalytic property.

Layered structure: α-Fe2 O3 nanodisks with a layered structure assembled from nanoplates were produced by a hydrothermal method. The simple, low-cost method used silicate anions as capping ligands, which selectively adsorbed onto the {0001} facet of α-Fe2 O3 and terminated the growth along the [0001] direction, leading to platelike building units. The layered structure led to significantly enhanced absorption of visible light, compared with single-layer α-Fe2 O3 , and excellent photocatalytic abilities.

Adsorption of heavy metal ions from aqueous solution by carboxylated cellulose nanocrystals.

A novel nanoadsorbent for the removal of heavy metal ions is reported. Cotton was first hydrolyzed to obtain cellulose nanocrystals (CNCs). CNCs were then chemically modified with succinic anhydride to obtain SCNCs. The sodic nanoadsorbent (NaSCNCs) was further prepared by treatment of SCNCs with saturated NaHCO3 aqueous solution. Batch experiments were carried out with SCNCs and NaSCNCs for the removal of Pb2+ and Cd2+. The effects of contact time, pH, initial adsorption concentration, coexisting ions and the regeneration performance were investigated. Kinetic studies showed that the adsorption equilibrium time of Pb2+ and Cd2+ was reached within 150 min on SCNCs and 5 min on NaSCNCs. The adsorption capacities of Pb2+ and Cd2+ on SCNCs and NaSCNCs increased with increasing pH. The adsorption isotherm was well fitted by the Langmuir model. The maximum adsorption capacities of SCNCs and NaSCNCs for Pb2+ and Cd2+ were 367.6 mg/g, 259.7 mg/g and 465.1 mg/g, 344.8 mg/g, respectively. SCNCs and NaSCNCs showed high selectivity and interference resistance from coexisting ions for the adsorption of Pb2+. NaSCNCs could be efficiently regenerated with a mild saturated NaCl solution with no loss of capacity after two recycles. The adsorption mechanisms of SCNCs and NaSCNCs were discussed.

Regulating the electronic structure through charge redistribution in dense single-atom catalysts for enhanced alkene epoxidation.

Inter-site interaction in densely populated single-atom catalysts has been demonstrated to have a crucial role in regulating the electronic structure of metal atoms, and consequently their catalytic performances. We herein report a general and facile strategy for the synthesis of several densely populated single-atom catalysts. Taking cobalt as an example, we further produce a series of Co single-atom catalysts with varying loadings to investigate the influence of density on regulating the electronic structure and catalytic performance in alkene epoxidation with O2. Interestingly, the turnover frequency and mass-specific activity are significantly enhanced by 10 times and 30 times with increasing Co loading from 5.4 wt% to 21.2 wt% in trans-stilbene epoxidation, respectively. Further theoretical studies reveal that the electronic structure of densely populated Co atoms is altered through charge redistribution, resulting in less Bader charger and higher d-band center, which are demonstrated to be more beneficial for the activation of O2 and trans-stilbene. The present study demonstrates a new finding about the site interaction in densely populated single-atom catalysts, shedding insight on how density affects the electronic structure and catalytic performance for alkene epoxidation.

Temperature-responsive smart nanoreactors: poly(N-isopropylacrylamide)-coated Au@mesoporous-SiO2 hollow nanospheres.

A nanoreactor with temperature-responsive poly(N-isopopylacrylamide) (PNIPAM) coated on the external pore mouth of mesoporous silica hollow spheres and Au nanoparticles at the internal pore mouth were fabricated. Such spatial separation allows both Au nanoparticles and PNIPAM to function without interfering with each other. Transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectra, and temperature-dependent optical transmittance curves demonstrate successful grafting of PNIPAM. This nanoreactor shows repeated on/off catalytic activity switched by temperature control. It shows excellent catalytic activity toward 4-nitrophenol (4-NP) reduction at 30 °C [below lower critical solution temperature (LCST) of PNIPAM] with a turnover frequency (TOF) of 14.8 h(-1). However, when the temperature was 50 °C (above LCST), the TOF dropped to 2.4 h(-1). Kinetic studies indicated that diffusion into the mesopores of the catalyst was the key factor, and the temperature-responsive behavior of PNIPAM was able to control this diffusion.

Low-cost synthesis of flowerlike α-Fe2O3 nanostructures for heavy metal ion removal: adsorption property and mechanism.

Flowerlike α-Fe(2)O(3) nanostructures were synthesized via a template-free microwave-assisted solvothermal method. All chemicals used were low-cost compounds and environmentally benign. These flowerlike α-Fe(2)O(3) nanostructures had high surface area and abundant hydroxyl on their surface. When tested as an adsorbent for arsenic and chromium removal, the flowerlike α-Fe(2)O(3) nanostructures showed excellent adsorption properties. The adsorption mechanism for As(V) and Cr(VI) onto flowerlike α-Fe(2)O(3) nanostructures was elucidated by X-ray photoelectron spectroscopy and synchrotron-based X-ray absorption near edge structure analysis. The results suggested that ion exchange between surface hydroxyl groups and As(V) or Cr(VI) species was accounted for by the adsorption. With maximum capacities of 51 and 30 mg g(-1) for As(V) and Cr(VI), respectively, these low-cost flowerlike α-Fe(2)O(3) nanostructures are an attractive adsorbent for the removal of As(V) and Cr(VI) from water.

Unprecedentedly high activity and selectivity for hydrogenation of nitroarenes with single atomic Co1-N3P1 sites.

Transition metal single atom catalysts (SACs) with M1-Nx coordination configuration have shown outstanding activity and selectivity for hydrogenation of nitroarenes. Modulating the atomic coordination structure has emerged as a promising strategy to further improve the catalytic performance. Herein, we report an atomic Co1/NPC catalyst with unsymmetrical single Co1-N3P1 sites that displays unprecedentedly high activity and chemoselectivity for hydrogenation of functionalized nitroarenes. Compared to the most popular Co1-N4 coordination, the electron density of Co atom in Co1-N3P1 is increased, which is more favorable for H2 dissociation as verified by kinetic isotope effect and density functional theory calculation results. In nitrobenzene hydrogenation reaction, the as-synthesized Co1-N3P1 SAC exhibits a turnover frequency of 6560 h-1, which is 60-fold higher than that of Co1-N4 SAC and one order of magnitude higher than the state-of-the-art M1-Nx-C SACs in literatures. Furthermore, Co1-N3P1 SAC shows superior selectivity (>99%) toward many substituted nitroarenes with co-existence of other sensitive reducible groups. This work is an excellent example of relationship between catalytic performance and the coordination environment of SACs, and offers a potential practical catalyst for aromatic amine synthesis by hydrogenation of nitroarenes.