Application of Additive Layer Manufacturing Technique on the Development of High Sensitive Fiber Bragg Grating Temperature Sensors.

This paper presents the development of temperature sensors based on fiber Bragg gratings (FBGs) embedded in 3D-printed structures made of different materials, namely polylatic acid (PLA) and thermoplastic polyurethane (TPU). A numerical analysis of the material behavior and its interaction with the FBG sensor was performed through the finite element method. A simple, fast and prone to automation process is presented for the FBG embedment in both PLA and TPU structures. The temperature tests were made using both PLA- and TPU-embedded FBGs as well as an unembedded FBG as reference. Results show an outstanding temperature sensitivity of 139 pm/°C for the FBG-embedded PLA structure, which is one of the highest temperature sensitivities reported for FBG-based temperature sensors in silica fibers. The sensor also shows almost negligible hysteresis (highest hysteresis below 0.5%). In addition, both PLA- and TPU-embedded structures present high linearity and response time below 2 s. The results presented in this work not only demonstrate the feasibility of developing fully embedded temperature sensors with high resolution and in compliance with soft robot application requirements, but also show that the FBG embedment in such structures is capable of enhancing the sensor performance.

Personalised socially assistive robot for cardiac rehabilitation: Critical reflections on long-term interactions in the real world.

Lack of motivation and low adherence rates are critical concerns of long-term rehabilitation programmes, such as cardiac rehabilitation. Socially assistive robots are known to be effective in improving motivation in therapy. However, over longer durations, generic and repetitive behaviours by the robot often result in a decrease in motivation and engagement, which can be overcome by personalising the interaction, such as recognising users, addressing them with their name, and providing feedback on their progress and adherence. We carried out a real-world clinical study, lasting 2.5 years with 43 patients to evaluate the effects of using a robot and personalisation in cardiac rehabilitation. Due to dropouts and other factors, 26 patients completed the programme. The results derived from these patients suggest that robots facilitate motivation and adherence, enable prompt detection of critical conditions by clinicians, and improve the cardiovascular functioning of the patients. Personalisation is further beneficial when providing high-intensity training, eliciting and maintaining engagement (as measured through gaze and social interactions) and motivation throughout the programme. However, relying on full autonomy for personalisation in a real-world environment resulted in sensor and user recognition failures, which caused negative user perceptions and lowered the perceived utility of the robot. Nonetheless, personalisation was positively perceived, suggesting that potential drawbacks need to be weighed against various benefits of the personalised interaction.

Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking.

Restoring and improving the ability to walk is a top priority for individuals with movement impairments due to neurological injuries. Powered exoskeletons coupled with functional electrical stimulation (FES), called hybrid exoskeletons, exploit the benefits of activating muscles and robotic assistance for locomotion. In this paper, a cable-driven lower-limb exoskeleton is integrated with FES for treadmill walking at a constant speed. A nonlinear robust controller is used to activate the quadriceps and hamstrings muscle groups via FES to achieve kinematic tracking about the knee joint. Moreover, electric motors adjust the knee joint stiffness throughout the gait cycle using an integral torque feedback controller. For the hip joint, a robust sliding-mode controller is developed to achieve kinematic tracking using electric motors. The human-exoskeleton dynamic model is derived using Lagrangian dynamics and incorporates phase-dependent switching to capture the effects of transitioning from the stance to the swing phase, and vice versa. Moreover, low-level control input switching is used to activate individual muscles and motors to achieve flexion and extension about the hip and knee joints. A Lyapunov-based stability analysis is developed to ensure exponential tracking of the kinematic and torque closed-loop error systems, while guaranteeing that the control input signals remain bounded. The developed controllers were tested in real-time walking experiments on a treadmill in three able-bodied individuals at two gait speeds. The experimental results demonstrate the feasibility of coupling a cable-driven exoskeleton with FES for treadmill walking using a switching-based control strategy and exploiting both kinematic and force feedback.

Feasibility study: Towards Estimation of Fatigue Level in Robot-Assisted Exercise for Cardiac Rehabilitation.

Socially Assistive Robotics (SAR) has shown to be an important tool to assist patients in physical rehabilitation. SAR is used to provide feedback about patient's state and performance to users and health professionals, therefore, patients are monitored by means of sensor interfaces. In this context, aiming to avoid over-training conditions, one of the most important parameter to monitor is the fatigue level. However, it is usually measured by subjective scales such as Borg scale, thus, there is a need to develop systems that are able to estimate fatigue with greater accuracy. It has been demonstrated that fatigue can be associated to the decreasing performance of the exercise. Hence, this work carried out a study to determinate which temporal and kinematic features are related to the fatigue level during a sit-to-stand test. The procedure consisted of sitting down and standing up from a chair while kinematic data were measured by a Kinect sensor, in order to relate kinematic data and fatigue. Results show that temporal features (time stand-to-stand and time sit-to-stand) and 3 kinematic features (max vertical-velocity of the spin base, max knee-flexo-extension velocity, and max hip-flexo-extension velocity), have a significant correlation with the fatigue level $(p \lt 0.05)$.

Large-Range Polymer Optical-Fiber Strain-Gauge Sensor for Elastic Tendons in Wearable Assistive Robots.

This paper presents the development and validation of a polymer optical-fiber strain-gauge sensor based on the light-coupling principle to measure axial deformation of elastic tendons incorporated in soft actuators for wearable assistive robots. An analytical model was proposed and further validated with experiment tests, showing correlation with a coefficient of R = 0.998 between experiment and theoretical data, and reaching a maximum axial displacement range of 15 mm and no significant hysteresis. Furthermore, experiment tests were carried out attaching the validated sensor to the elastic tendon. Results of three experiment tests show the sensor's capability to measure the tendon's response under tensile axial stress, finding 20.45% of hysteresis in the material's response between the stretching and recovery phase. Based on these results, there is evidence of the potential that the fiber-optical strain sensor presents for future applications in the characterization of such tendons and identification of dynamic models that allow the understanding of the material's response to the development of more efficient interaction-control strategies.

Human-robot sensor interface for cardiac rehabilitation.

Cardiovascular disease is the leading cause of death in the world. A program of cardiac rehabilitation (CR) is related to physical activities or exercises to regain the optimal quality of life. CR relies on the necessity to evaluate, control and supervise a patient's status and progress. This work has two objectives: on the one hand, provide a tool for clinicians to assess the patient's status during CR. On the other hand, there is evidence that robots can motivate patients during therapeutic procedures. Our sensor interface explores the possibility to integrate a robotic agent into cardiac therapy. This work presents an exploratory experiment for on-line assessment of typical CR routines.