RESUMEN
Borophene, a 2D material exhibiting unique crystallographic phases like the anisotropic atomic lattices of ß12 and X3 phases, has attracted considerable attention due to its intriguing Dirac nature and metallic attributes. Despite surpassing graphene in electronic mobility, borophene's potential in energy storage and catalysis remains untapped due to its inherent electrochemical and catalytic limitations. Elemental doping emerges as a promising strategy to introduce charge carriers, enabling localized electrochemical and catalytic functionalities. However, effective doping of borophene has been a complex and underexplored challenge. Here, an innovative, one-pot microwave-assisted doping method, tailored for the ß12 phase of borophene is introduced. By subjecting dispersed ß12 borophene in dimethylformamide to controlled microwave exposure with sulfur powder and FeCl3 as doping precursors, S- and Fe doping in borophene can be controlled. Employing advanced techniques including high-resolution transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy, confirm successful sulfur and iron dopant incorporation onto ß12 borophene is confirmed, achieving doping levels of up to 11 % and 13 %, respectively. Remarkably, S- and Fe-doped borophene exhibit exceptional supercapacitive behavior, with specific capacitances of 202 and 120 F g-1 , respectively, at a moderate current density of 0.25 A g-1 .
RESUMEN
Monoelemental atomic sheets (Xenes) and other 2D materials offer record electronic mobility, high thermal conductivity, excellent Young's moduli, optical transparency, and flexural capability, revolutionizing ultrasensitive devices and enhancing performance. The ideal synthesis of these quantum materials should be facile, fast, scalable, reproducible, and green. Microwave expansion followed by cryoquenching (MECQ) leverages thermal stress in graphite to produce high-purity graphene within minutes. MECQ synthesis of graphene is reported at 640 and 800 W for 10 min, followed by liquid nitrogen quenching for 5 and 90 min of sonication. Microscopic and spectroscopic analyses confirmed the chemical identity and phase purity of monolayers and few-layered graphene sheets (200-12 µm). Higher microwave power yields thinner layers with enhanced purity. Molecular dynamics simulations and DFT calculations support the exfoliation under these conditions. Electrostatic droplet switching is demonstrated using MECQ-synthesized graphene, observing electrorolling of a mercury droplet on a BN/graphene interface at voltages above 20 V. This technique can inspire the synthesis of other 2D materials with high purity and enable new applications.
RESUMEN
Borophene (B), with remarkably unique chemical binding in its crystallographic structural phases including anisotropic structures, theoretically has high Young's modulus and thermal conductivity. Moreover, it is metallic in nature, and has recently joined the family of two-dimensional (2D) materials and is poised to be employed in flexible hetero-layered devices and sensors in fast electronic gadgets and excitonic devices. Interfacial coupling helps individual atomic sheets synergistically work in tandem, and is very crucial in controllable functionality. Most of the microscopic and spectroscopic scans reveal surface information; however, information regarding interfacial coupling is difficult to obtain. Electronic signatures of dynamic inter-layer coupling in B/boron nitride (BN) and B/molybdenum disulfide (MoS2) have been detected in the form of distinct peaks in differential current signals obtained from scanning tunneling spectroscopy (STS) and conducting atomic force microscopy (CAFM). These unique sets of observed peaks represent interfacial coupling quantum states. The peaks in the electronic density of states (DOS) obtained via density functional theory (DFT) band structure calculations matched well with the electronic signatures of coupling quantum states. In our calculations, we found that the DOS peak evolves when the component layers are brought to compromised distances. While B/BN exhibits green sensitivity indicating mid-gap formation, B/MoS2 bestows red sensitivity indicating band-gap excitation of MoS2. Molecular detection of methylene blue (MB) based on surface-enhanced Raman spectroscopy (SERS) was carried out with borophene-based hetero-layered stacks as molecular anchoring platforms.
RESUMEN
Dirac materials are characterized by the emergence of massless quasiparticles in their low-energy excitation spectrum that obey the Dirac Hamiltonian. Known examples of Dirac materials are topological insulators, d-wave superconductors, graphene, and Weyl and Dirac semimetals, representing a striking range of fundamental properties with potential disruptive applications. However, none of the Dirac materials identified so far shows metallic character. Here, we present evidence for the formation of free-standing molybdenene, a two-dimensional material composed of only Mo atoms. Using MoS2 as a precursor, we induced electric-field-assisted molybdenene growth under microwave irradiation. We observe the formation of millimetre-long whiskers following screw-dislocation growth, consisting of weakly bonded molybdenene sheets, which, upon exfoliation, show metallic character, with an electrical conductivity of ~940 S m-1. Molybdenene when hybridized with two-dimensional h-BN or MoS2, fetch tunable optical and electronic properties. As a proof of principle, we also demonstrate applications of molybdenene as a surface-enhanced Raman spectroscopy platform for molecular sensing, as a substrate for electron imaging and as a scanning probe microscope cantilever.
RESUMEN
Solar-driven photothermal water evaporation is considered an elegant and sustainable technology for freshwater production. The existing systems, however, often suffer from poor stability and biofouling issues, which severely hamper their prospects in practical applications. Conventionally, photothermal materials are deposited on the membrane supports via vacuum-assisted filtration or dip-coating methods. Nevertheless, the weak inherent material-membrane interactions frequently lead to poor durability, and the photothermal material layer can be easily peeled off from the hosting substrates or partially dissolved when immersed in water. In the present article, the discovery of the incorporation of borophene into cellulose nanofibers (CNF), enabling excellent environmental stability with a high light-to-heat conversion efficiency of 91.5% and water evaporation rate of 1.45 kg m-2 h-1 under simulated sunlight is reported. It is also demonstrated that borophene papers can be employed as an excellent active photothermal material for eliminating almost 100% of both gram-positive and gram-negative bacteria within 20 min under three sun irradiations. The result opens a new direction for the design of borophene-based papers with unique photothermal properties which can be used for the effective treatment of a wide range of wastewaters.
Asunto(s)
Bacterias Gramnegativas , Agua , Antibacterianos , Bacterias Grampositivas , CelulosaRESUMEN
Xenes, i.e., monoelemental two-dimensional atomic sheets, are promising for sensitive and ultrafast sensor applications owing to exceptional carrier mobility; however, most of them oxidize below 500 °C and therefore cannot be employed for high-temperature applications. 2D gold, an oxidation-resistant plasmonic Xene, is extremely promising. 2D gold was experimentally realized by both atomic layer deposition and chemical synthesis using sodium citrate. However, it is imperative to develop a new facile single-step method to synthesize 2D gold. Here, liquid-phase synthesis of 2D gold is demonstrated by microwave exposure to auric chloride dispersed in dimethylformamide. Microscopies (AFM and high-resolution TEM), spectroscopies (Raman, UV-vis, and X-ray photoelectron), and X-ray diffraction establish the formation of a hexagonal crystallographic phase for 2D gold. 2D-2D hybrids of 2D gold have also been synthesized and investigated for electronic/optoelectronic behaviors and SERS-based molecular sensing. DFT band structure calculation for 2D gold and its hybrids corroborates the experimental findings.
RESUMEN
Rapid and reliable detection tools are essential for disease surveillance and outbreak management, and genomic data is essential to determining pathogen origin and monitoring of transmission pathways. Low virus copy number and poor RNA quality can present challenges for genomic sequencing of plant viruses, but this can be overcome by enrichment of target nucleic acid. A targeted whole genome sequencing (TWG-Seq) approach for the detection of cucumber green mottle mosaic virus (CGMMV) has been developed where overlapping amplicons generated using two multiplex RT-PCR assays are then sequenced using the Oxford Nanopore MinION. Near complete coding region sequences were assembled with ≥100× coverage for infected leaf tissue dilution samples with RT-qPCR cycle quantification (Cq) values from 11.8 to 38 and in seed dilution samples with Cq values 13.8 to 27. Consensus sequences assembled using this approach showed greater than 99% nucleotide similarity when compared to genomes produced using metagenomic sequencing. CGMMV could be confidently detected in historical seed isolates with degraded RNA. Whilst limited access to, and costs associated with second-generation sequencing platforms can influence diagnostic outputs, the portable Nanopore technology offers an affordable high throughput sequencing alternative when combined with TWG-Seq for low copy or degraded samples.
RESUMEN
Borophene, the lightest among all Xenes, possesses extreme electronic mobility along with high carrier density and high Young's modulus. To accomplish device-quality borophene, novel approaches of realization of monolayers need to be urgently explored. In this work, micromechanical exfoliation is discovered to result in mono- and few-layered borophene of device quality. Borophene sheets are successfully fabricated down to monolayer thickness. Distinct crystallographic phases of borophene viz. XRD study reveals crystallographic phase transition from rhombohedral to several other eigen phases of borophene. The role of the destination substrates is held crucial in determining the final phase of the transferred sheet. The exfoliation energy is calculated by density functional theory. Molecular dynamics simulations are used to simulate the exfoliation process. Heterolayers of borophene, with black phosphorene (BP) or with molybdenum disulfide (MoS2 ) atomic sheets, are found to result in photoexcited coupling quantum states. Gold-coated borophene bestows promising anchoring capability for surface-enhanced Raman spectroscopy (SERS). Successful demonstration of the electronic behavior of micromechanically exfoliated borophene and excitonic behavior of borophene-based heterolayers will guide future generation devices not only in electronics and excitonics, but also in thermal management, electronic packaging, hydrogen storage, hybrid energy storage, and clean energy solutions.