A Green Approach to Natural Dyes in Dye-Sensitized Solar Cells.

Solar cells are pivotal in harnessing renewable energy for a greener and more sustainable energy landscape. Nonetheless, eco-friendly materials for solar cells have not been as extensive as conventional counterparts, highlighting a significant area for further investigation in advancing sustainable energy technologies. This study investigated natural dyes from cost-effective and environmentally friendly blueberries and mulberries. These dyes were utilized as alternative sensitizers for dye-sensitized solar cells (DSSCs). Alongside the natural dyes, a green approach was adopted for the DSSC design, encompassing TiO2 photoanodes, eco-friendly electrolytes, and green counter-electrodes created from graphite pencils and candle soot. Consequently, the best-optimized dye sensitizer was mulberry, with an output power of 13.79 µW and 0.122 µW for outdoor and indoor environments, respectively. This study underscored the feasibility of integrating DSSCs with sensitizers derived from readily available food ingredients, potentially expanding their applications in educational kits and technology development initiatives.

Sol-Gel Derived Al-Ga Co-Doped ZnO Thin Films Embedded with Microrods.

Aluminium­gallium (Al­Ga) co-doped ZnO (AGZO) thin films with different Al­Ga at.% were spin coated on glass substrates using sol­gel spin coating technique. Morphological images by atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) reveal that the granular structures of co-doped films are embedded with microrods, which has never been reported before. The density of the microrods increases with higher co-doping at.%. The Hall Transport measurements reveal that the electrical properties of the co-doped films are comparable with single Ga doped ZnO films, which implies that the co-doping method can be a way forward to reduce the fabrication cost of the doped ZnO films involving expensive raw material. Also, the unique features of the AGZO films embedded with microrods may create new opportunity for these films to be implemented in emerging optoelectronic devices such as solar cells and organic light emitting diodes.

A Review on the Progress, Challenges, and Performances of Tin-Based Perovskite Solar Cells.

In this twenty-first century, energy shortages have become a global issue as energy demand is growing at an astounding rate while the energy supply from fossil fuels is depleting. Thus, the urge to develop sustainable renewable energy to replace fossil fuels is significant to prevent energy shortages. Solar energy is the most promising, accessible, renewable, clean, and sustainable substitute for fossil fuels. Third-generation (3G) emerging solar cell technologies have been popular in the research field as there are many possibilities to be explored. Among the 3G solar cell technologies, perovskite solar cells (PSCs) are the most rapidly developing technology, making them suitable for generating electricity efficiently with low production costs. However, the toxicity of Pb in organic-inorganic metal halide PSCs has inherent shortcomings, which will lead to environmental contamination and public health problems. Therefore, developing a lead-free perovskite solar cell is necessary to ensure human health and a pollution-free environment. This review paper summarized numerous types of Sn-based perovskites with important achievements in experimental-based studies to date.

The Role of Polymers in Halide Perovskite Resistive Switching Devices.

Currently, halide perovskites (HPs) are gaining traction in multiple applications, such as photovoltaics and resistive switching (RS) devices. In RS devices, the high electrical conductivity, tunable bandgap, good stability, and low-cost synthesis and processing make HPs promising as active layers. Additionally, the use of polymers in improving the RS properties of lead (Pb) and Pb-free HP devices was described in several recent reports. Thus, this review explored the in-depth role of polymers in optimizing HP RS devices. In this review, the effect of polymers on the ON/OFF ratio, retention, and endurance properties was successfully investigated. The polymers were discovered to be commonly utilized as passivation layers, charge transfer enhancement, and composite materials. Hence, further HP RS improvement integrated with polymers revealed promising approaches to delivering efficient memory devices. Based on the review, detailed insights into the significance of polymers in producing high-performance RS device technology were effectively understood.

Polymer-enhanced perovskite oxide-based photocatalysts: a review.

Oxide perovskites (OPs) have emerged as promising photocatalysts for numerous applications, such as energy conversion, renewable fuels, and environmental remediation. Although OPs are gaining traction, their efficacies are still hindered by low charge carrier mobility and poor stability. This study investigated the function of polymers actively participating in OP structures to improve the overall characteristics. An overview of the polymer-enhanced perovskite oxide photocatalyst (PEPOP) field was effectively reviewed. These PEPOPs were demonstrated in photovoltaics, pollutant degradation, and gas conversion and reduction. Nonetheless, additional research is needed to explore the potential of PEPOPs to establish their efficacy in photocatalytic applications. The technological improvements of PEPOPs were hindered by significant challenges related to stability and sensitivity. The urgency of this review was apparent due to the fast-paced nature of research in the field of photocatalysis. Recent breakthroughs and emerging applications highlight the need for a comprehensive overview of PEPOPs and their enhanced catalytic capabilities. Consequently, a broad outlook was provided for the current state of PEPOP-related studies, highlighting the potential of these materials for future applications.

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes.

Over the past few decades, electrochromism has been a prominent topic in energy-saving applications, which is based on the mechanism of altering the optical transmittance of EC materials under the effect of a small applied voltage. Thus, tungsten oxide (WO3) is a significant chemical compound typically applied in electrochromic devices (ECDs) as it is responsible for the optical transmittance variation. In this work, the WO3 films were produced through a sol-gel spin-coating method. The effect of various transparent conducting oxides (TCOs, which are indium-doped tin oxide (ITO), fluorine-doped tin oxide (FTO) glass substrates, and aluminum-doped zinc oxide (AZO)) was investigated in the construction of ECDs. Based on a conducting polymer polypyrene carbonate electrolyte, ITO and aluminum-doped zinc oxide (AZO)-coated glasses were also examined as counter electrodes. The electrode combination employing FTO and ITO as the TCO and counter electrode, respectively, exhibited the most significant coloration efficiency of 72.53 cm2/C. It had coloring and bleaching transmittance of 14% and 56%, respectively, with a large optical modulation of 42%. In addition to that, ECDs with the AZO counter electrode have the advantage of lower intercalation charges compared to ITO and FTO. Hence, this research offers a new avenue for understanding the role of common TCO and counter electrodes in the development of WO3-based ECDs with conducting polymer electrolytes.

Performances of Polymer-Dispersed Liquid Crystal Films for Smart Glass Applications.

Polymer-dispersed liquid crystal (PDLC) film is an active smart film penetrating the market due to its unique functionalities. These functional characteristics include switchable tint capabilities, which shield building residents from the sun's harmful ultraviolet (UV) rays, improve energy-saving features, and produce higher cost-efficiency. Although PDLC films are promising in several applications, there is still ambiguity on the performance of PDLC films. Particularly, the sizing effects' (such as film thickness and area) correlation with visible light transmission (VLT), ultraviolet rejection (UVR), infrared rejection (IRR), light intensity, current consumption, and apparent power consumption is not well understood. Therefore, this study investigated the sizing effects of PDLC films, including the thickness effect on VLT, UVR, IRR, light intensity, and area influence on current and apparent power consumptions. The varying applied voltage effect on the light transmittance of the PDLC film was also effectively demonstrated. A 0.1 mm PDLC film was successfully presented as a cost-efficient film with optimal parameters. Consequently, this study paves the way for a clearer understanding of PDLC films (behavior and sizing effects) in implementing economic PDLC films for large-scale adoption in commercial and residential premises.

Towards an All-Solid-State Electrochromic Device: A Review of Solid-State Electrolytes and the Way Forward.

In order to curb high electricity usage, especially in commercial buildings, smart windows, also known as "switchable" or "smart" glasses, have attracted a significant amount of attention in an effort to achieve energy savings in eco-friendly buildings and transportation systems. Smart windows save energy by regulating the input of solar heat and light and hence cutting down air-conditioning expenses, while maintaining indoor comfort. This is achieved by electrochromism, which is defined as the reversible colour change in electrochromic (EC) materials from transparent to dark blue and vice versa under a small applied voltage. Recent state-of-the-art electrochromic devices (ECD) adopt liquid-based electrolytes as the main source of energy for basic operations. While this has resulted in much success in ECDs as reported in past studies, there remain several drawbacks to this aspect, such as liquid electrolyte leakage and evaporation, not to mention safety concerns related to the harmful nature of electrolyte materials. This paper aims to review the recent advances in various solid electrolytes that are potential solutions to the mentioned problems.

Realisation of Solid-State Electrochromic Devices Based on Gel Electrolyte.

Background: In the last decade, there has been much interest in the area of solid polymer electrolyte (SPE) to address the issues of electrolyte leakage and evaporation in electrochromic devices (ECD). ECD is a state-of-the-art technology having the ability to change from transparent state to opaque state under the influence of a small applied voltage for energy saving applications. Methods: In this work, tungsten oxide (WO 3) films were fabricated via the sol-gel spin-coating method. Subsequently, ECDs were assembled based on SPE and liquid polymer electrolyte (LPE), respectively using indium doped tin oxide (ITO) coated glass as conducting electrodes and WO 3 films as working electrode. Results: Cyclic voltammetry (CV) results revealed reduced ionic conductivity of conducting ions in SPE based ECD (SECD) owing to increased viscosity by addition of PMMA. However, lesser time was required for the colouration process. LPE based ECD (LECD) showed higher colouration efficiency (CE) compared to its SECD counterpart. This is attributed to its larger optical modulation. Conclusions: This work presents a comparison between the performance of LECD and SECD in terms of electrochromic (EC) and optical properties. They were analysed through CV, chronoamperometry (CA) and ultraviolet-visible (UV-Vis) spectrophotometer. Furthermore, this work provides an insight on the employment of solid-state electrolytes in ECDs in view of the persistent leakage and evaporation problems in ECD implementation.

Recent Advances in Halide Perovskite Resistive Switching Memory Devices: A Transformation from Lead-Based to Lead-Free Perovskites.

Due to their remarkable electrical and light absorption characteristics, hybrid organic-inorganic perovskites have recently gained popularity in several applications such as optoelectronics, lasers, and light-emitting diodes. Through this, there has recently been an increase in the use of halide perovskites (HPs) in resistive switching (RS) devices. However, lead-based (Pb-based) perovskites are notorious for being unstable and harmful to the environment. As a result, lead-free (Pb-free) perovskite alternatives are being investigated in achieving the long-term and sustainable use of RS devices. This work describes the characteristics of Pb-based and Pb-free perovskite RS devices. It also presents the recent advancements of HP RS devices, including the selection strategies of perovskite structures. In terms of resistive qualities, the directions of both HPs appear to be identical. Following that, the possible impact of switching from Pb-based to Pb-free HPs is examined to determine the requirement in RS devices. Finally, this work discusses the opportunities and challenges of HP RS devices in creating a stable, efficient, and sustainable memory storage technology.

ZnO microstructures and nanostructures prepared by sol-gel hydrothermal technique.

Zinc oxide (ZnO) is an emerging material in large area electronic applications such as thin-film solar cells and transistors. We report on the fabrication and characterization of ZnO microstructures and nanostructures. The ZnO microstructures and nanostructures have been synthesized using sol-gel immerse technique on oxidized silicon substrates. Different precursor's concentrations ranging from 0.0001 M to 0.01 M (M=molarity) using zinc nitrate hexahydrate [Zn(NO3)2. 6H2O] and hexamethylenetetramine [C6H12N4] were employed in the synthesis of the ZnO structures. The surface morphologies were examined using scanning electron microscope (SEM) and atomic force microscope (AFM). In order to investigate the structural properties, the ZnO microstructures and nanostructures were measured using X-ray diffractometer (XRD). The optical properties of the ZnO structures were measured using photoluminescence (PL) and ultraviolet-visible (UV-Vis) spectroscopies.

Influence of post-annealing temperature on the material properties of zinc oxide nanorods.

Zinc oxide (ZnO) is an emerging optoelectronic material in large area electronic applications due to its various functional behaviors. We present the fabrication and the characterization of ZnO nanorods. The ZnO nanorods were synthesized using sol-gel hydrothermal technique on oxidized silicon substrates. Different post-annealing temperatures were explored in the sol-gel hydrothermal synthesis of the ZnO nanorods. The surface morphology of the ZnO nanorods were examined using scanning electron microscope (SEM). In order to investigate the structural properties, the ZnO nanorods were measured using X-ray diffractometer (XRD). The optical properties were measured using ultraviolet-visible (UV-Vis) spectroscopy. The influence of the post-annealing temperature on the realized ZnO nanorods will be revealed and discussed in this paper.