Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Más filtros

Tipo del documento
Asunto de la revista
País de afiliación
Intervalo de año de publicación
1.
Sci Rep ; 14(1): 5358, 2024 Mar 04.
Artículo en Inglés | MEDLINE | ID: mdl-38438457

RESUMEN

In this paper, the authors, for the first time, have shown the use of 2D conformal microwave absorbing material (MAM) in the design and fabrication of a portable Anechoic chamber (AC). The MAM is fabricated on the transparent and conductive metal oxide layer named indium-tin-oxide (ITO) with Polyethylene terephthalate as the substrate and the ground plane for zero transmission having overall thickness of 0.012 λ where λ is calculated at 0.7 GHz. The MAM is characterized for 0.7 to 18 GHz for both TE- and TM-polarisation and oblique incidence. High sheet resistance, dipole-like resonance structure patterned on the ITO, and the air-spacing between the layers is optimized to achieve broadband absorption. The MAM is used to line the six sides of the rectangular anechoic chamber having inner dimensions of: (L × W × H: 850 × 650 × 720 mm3). The return loss (RL), gain, and radiation pattern of three antenna working at 1.56, 2.43, and 4.93 GHz are analyzed inside the AC. The measurement results for all frequencies very well match with the simulation studies, thus validating and opening the door for the future use of ultra-thin and planar MAM in the AC.

2.
ImplantNews ; 5(5): 489-495, set.-out. 2008. ilus
Artículo en Portugués | LILACS, BBO - odontología (Brasil) | ID: lil-523873

RESUMEN

A utilização de implantes osseointegrados na reabilitação de áreas edêntulas vem evoluindo de forma considerável nas últimas décadas. Certamente o desenvolvimento de técnicas de enxertia óssea foi um dos grandes avanços, pois permitiu a reabilitação de áreas atróficas. Pacientes com ausências dentárias na região posterior da maxila freqüentemente apresentam pneumatização dos seios maxilares, dificultando a colocação de implantes dentários. Atualmente o material mais utilizado para o preenchimento de seio maxilar é o enxerto ósseo autógeno retirado de sítios intra ou extrabucais. Apesar desse procedimento ter sua eficácia comprovada clínica e histologicamente, nem sempre é bem tolerado pelos pacientes e por este motivo substitutos ósseos estão sendo cada vez mais estudados e desenvolvidos. O objetivo deste trabalho é apresentar uma revisão da literatura sobre os principais tópicos relacionados à cirurgia de elevação do assoalho do seio maxilar. Casos clínicos ilustrativos serão apresentados.


Asunto(s)
Trasplante Óseo , Implantes Dentales , Seno Maxilar/cirugía
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA