Performance Enhancement of Electrochemiluminescence with the Immunosensor Controlled Using Magnetized Masks for the Determination of Epithelial Cancer Biomarker EpCAM.

The performance of an electrochemiluminescence (ECL) immunosensor was improved with a particle gradient. SiO2-coated magnetic beads were adopted as nanocarriers for gradient manipulation and immobilized with the primary antibody. Cadmium telluride quantum dots were coated with a layer of protein G for conjugation and orientation of the secondary antibody as signal labels. ECL immunosensor gradients on the electrode were formed by magnetolithography (ML) with magnetized nickel masks of column and stripe arrays. The immunosensor generally aggregated as an island on the substrate, leading to a decrease of efficiency in the characteristic signals. Stripe arrays of magnetized nickel were designed to generate cylindrical magnetic flux on the substrate to improve the particle manipulation with the gradient. Various gradients of the sandwich-structured immunosensor substantially affected the electrochemical performance. Compared to the gradient-free immunosensor, the gradient of the immunosensor generated by ML using a 3 µm stripe array mask enhanced the ECL intensity ∼2.2 times. The results of quantification of epithelial cell adhesion molecules (EpCAM) with the gradient immunosensor showed a broad linear range (15-420 pg mL-1), a low limit of detection (5.5 pg mL-1), and high reliability for EpCAM-spiked serum samples, indicating that the immunosensor gradient substantially enhances the performance of the ECL assay.

LSPR Sensing of Epithelial Cell Adhesion Molecules through Sphere and Cavity Plasmons of a Composite Ring Array of Poly[2-(dimethylamino)ethyl methacrylate]/Gold Nanoparticles.

Self-organization facilitates the formation of specific structures as a result of constituent interactions. In this study, the bottom of a 600 nm hole array photoresist template, which was deposited with a hydrophobic atom transfer radical polymerization (ATRP) initiator, was wetted by treatment with oxygen plasma. After the removal of the photoresist template, ring patterns of the ATRP initiator were formed at the interface between the hydrophobic and wetting regions. Poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) was grafted from the ring array of the initiator to immobilize gold nanoparticles (AuNPs) as a uniform ring array on a silicon substrate via repeated swelling/shrinking cycles. The localized surface plasmon resonance (LSPR) peak of the PDMAEMA-AuNP hybrid ring (PAHR) red-shifted after 12 swelling/shrinking cycles. In comparison to gold nanoparticles, scalable gold nanorings can effectively develop a variety of nanostructures to design LSPR-based sensors and optimize the sensing accuracy and stability. To detect epithelial cell adhesion molecules (EpCAM) during the structural change from a ring to a disk, antiEpCAM was anchored onto the PAHR as a biosensor during swelling/shrinking. The coupling of antiEpCAM and EpCAM led to asymptotical convergence from rings to disks as well as blue shifts of the LSPR peaks. Linear correlation between the blue shift and EpCAM concentration showed a limit of detection of ∼27 pg mL-1 and a linear range of 25-200 pg mL-1 for the detection of EpCAM within 30 min. The simple method of combining lithography and plasma technology provides a versatile platform for developing the scalable ring structure of AuNPs for highly sensitive and selective biosensing.

Hydrogen Bond Strength-Mediated Self-Assembly of Supramolecular Nanogels for Selective and Effective Cancer Treatment.

This study provides a significant contribution to the development of multiple hydrogen-bonded supramolecular nanocarrier systems by demonstrating that controlling the hydrogen bond strength within supramolecular polymers represents a crucial factor to tailor the drug delivery performance and enhance the effectiveness of cancer therapy. Herein, we successfully developed two kinds of poly(ethylene glycol)-based telechelic polymers Cy-PEG and UrCy-PEG having self-constituted double and quadruple hydrogen-bonding cytosine (Cy) and ureido-cytosine (UrCy) end-capped groups, respectively, which directly assemble into spherical nanogels with a number of interesting physical characteristics in aqueous solutions. The UrCy-PEG nanogels containing quadruple hydrogen-bonded UrCy dimers exhibited excellent long-term structural stability in a serum-containing biological medium, whereas the double hydrogen-bonded Cy moieties could not maintain the structural integrity of the Cy-PEG nanogels. More importantly, after the drug encapsulation process, a series of in vitro experiments clearly confirmed that drug-loaded UrCy-PEG nanogels induced selective apoptotic cell death in cancer cells without causing significant cytotoxicity to healthy cells, while drug-loaded Cy-PEG nanogels exerted nonselective cytotoxicity toward both cancer and normal cells, indicating that increasing the strength of hydrogen bonds in nanogels plays a key role in enhancing the selective cellular uptake and cytotoxicity of drugs and the subsequent induction of apoptosis in cancer cells.

CO2-Responsive Water-Soluble Conjugated Polymers for In Vitro and In Vivo Biological Imaging.

Water-soluble conjugated polymers (WCPs) composed of a hydrophobic polythiophene main chain with hydrophilic tertiary amine side-chains can directly self-assemble into sphere-like nano-objects in an aqueous solution due to phase separation between the hydrophilic and hydrophobic segments of the polymeric structure. Due to the presence of gas-responsive tertiary amine moieties in the spherical structure, the resulting polymers rapidly and reversibly tune their structural features, surface charge, and fluorescence performance in response to alternating carbon dioxide (CO2) and nitrogen (N2) bubbling, which leads to significantly enhanced fluorescence and surface charge switching properties and a stable cycle of on and off switching response. In vitro studies confirmed that the CO2-treated polymers exhibited extremely low cytotoxicity and enhanced cellular uptake ability in normal and tumor cells, and thus possess significantly improved fluorescence stability, distribution, and endocytic uptake efficiency within cellular organisms compared to the pristine polymer. More importantly, in vivo assays demonstrated that the CO2-treated polymers displayed excellent biocompatibility and high fluorescence enhancement in living zebrafish, whereas the fluorescence intensity and stability of zebrafish incubated with the pristine polymer decreased linearly over time. Thus, these CO2 and N2-responsive WCPs could potentially be applied as multifunctional fluorescent probes for in vivo biological imaging.

Optical assay of trypsin using a one-dimensional plasmonic grating of gelatin-modified poly(methacrylic acid).

The geometry of resonant absorbers (RA) is varied by tryptic digestion to design a probe platform. The process includes fabrication of a line array of poly(methacrylic acid) (PMAA) brush as an RA, tailed by the immobilization of gelatin. The gelatin-modified PMAA RA is a kind of one-dimensional plasmonic grating, possessing an optical feature with a characteristic absorption peak. The growth of gelatin on PMAA RA resulted in a blue shift of the absorption peak from 465 to 263 nm. Trypsin catalyzes the hydrolysis of peptide bonds, breaking down gelatin into smaller peptides causing the change in geometry of RA. The gelatin of RA was digested in a wide linear range of activity of trypsin from 34 to 1088 U mL-1 resulting in a red shift of the absorption peak of RA from 263 to 474 nm within 10 min. The limit of detection achieved is 11 U mL-1 with ca. 1.9% standard deviation and 101.4% recovery of spiked serum samples. The chemical selectivity of the trypsin assay is evidenced by motoring the changes in a shift of the absorption peak of gelatin-modified PMAA RA using chymotrypsin and horseradish peroxidase. Graphical abstract Schematic representation of synthesis route of 1D gelatin grating on silicon surface for trypsin probing.

A Dynamic Hanging-Drop System for Mesenchymal Stem Cell Culture.

There have been many microfluid technologies combined with hanging-drop for cell culture gotten developed in the past decade. A common problem within these devices is that the cell suspension introduced at the central inlet could cause a number of cells in each microwell to not regularize. Also, the instability of droplets during the spheroid formation remains an unsolved ordeal. In this study, we designed a microfluidic-based hanging-drop culture system with the design of taper-tube that can increase the stability of droplets while enhancing the rate of liquid exchange. A ring is surrounding the taper-tube. The ring can hold the cells to enable us to seed an adequate amount of cells before perfusion. Moreover, during the period of cell culture, the mechanical force around the cell is relatively low to prevent stem cells from differentiate and maintain the phenotype. As a result of our hanging system design, cells are designed to accumulate at the bottom of the droplet. This method enhances convenience for observation activities and analysis of experiments. Thus, this microfluid chip can be used as an in vitro platform representing in vivo physiological conditions, and can be useful in regenerative therapy.

Self-Assembled pH-Responsive Polymeric Micelles for Highly Efficient, Noncytotoxic Delivery of Doxorubicin Chemotherapy To Inhibit Macrophage Activation: In Vitro Investigation.

Self-assembled pH-responsive polymeric micelles, a combination of hydrophilic poly(ethylene glycol) segments and hydrogen bonding interactions within a biocompatible polyurethane substrate, can spontaneously self-assemble into highly controlled, nanosized micelles in aqueous solution. These newly developed micelles exhibit excellent pH-responsive behavior and biocompatibility, highly controlled drug (doxorubicin; DOX) release behavior, and high drug encapsulation stability in different aqueous environments, making the micelles highly attractive potential candidates for safer, more effective drug delivery in applications such as cancer chemotherapy. In addition, in vitro cell studies revealed the drug-loaded micelles possessed excellent drug entrapment stability and low cytotoxicity toward macrophages under normal physiological conditions (pH 7.4, 37 °C). When the pH of the culture media was reduced to 6.0 to mimic the acidic tumor microenvironment, the drug-loaded micelles triggered rapid release of DOX within the cells, which induced potent antiproliferative and cytotoxic effects in vitro. Importantly, fluorescent imaging and flow cytometric analyses confirmed the DOX-loaded micelles were efficiently delivered into the cytoplasm of the cells via endocytosis and then subsequently gradually translocated into the nucleus. Therefore, these multifunctional micelles could serve as delivery vehicles for precise, effective, controlled drug release to prevent accumulation and activation of tumor-promoting tumor-associated macrophages in cancer tissues. Thus, this unique system may offer a potential route toward the practical realization of next-generation pH-responsive therapeutic delivery systems.

Binary-blend fibber-based capture assay of circulating tumor cells for clinical diagnosis of colorectal cancer.

BACKGROUND: In addition to conventional approaches, detecting and characterizing CTCs in patient blood allows for early diagnosis of cancer metastasis. METHODS: We blended poly(ethylene oxide) (PEO) into nylon-6 through electrospinning to generate a fibrous matbased circulating tumour cells (CTCs) assay. The contents of nylon-6 and PEO in the electrospun blend fibrous mats (EBFMs) were optimized to facilitate high cell-substrate affinity and low leukocyte adsorption. RESULTS: Compared with the IsoFlux System, a commercial instrument for CTC detection, the CTC assay of EBFMs exhibited lower false positive readings and high sensitivity and selectivity with preclinical specimens. Furthermore, we examined the clinical diagnosis accuracy of colorectal cancer, using the CTC assay and compared the results with those identified through pathological analyses of biopsies from colonoscopies. Our positive expressions of colorectal cancer through CTC detection completely matched those recognized through the pathological analyses for the individuals having stage II, III, and IV colorectal cancer. Nevertheless, two in four individuals having stage I colorectal cancer, recognized through pathological analysis of biopsies from colonoscopies, exhibited positive expression of CTCs. Ten individuals were identified through pathological analysis as having no colorectal tumours. Nevertheless, two of these ten individuals exhibited positive expression of CTCs. CONCLUSIONS: Thus, in this population, the low cost EBFMs exhibited considerable capture efficiency for the non-invasive diagnosis of colorectal cancer.

Fabrication of device with poly(N-isopropylacrylamide)-b-ssDNA copolymer brush for resistivity study.

In this study, we grafted bromo-terminated poly(N-isopropylacrylamide) (PNIPAAm) brushes onto thin gold films deposited on silicon, and then reacted with NaN3 to produce azido-terminated PNIPAAm brushes. A probe sequence of single-stranded DNA (ssDNA) with a 4-pentynoic acid succinimidyl ester unit was grafted onto the azido-terminated PNIPAAm brushes through a click reaction, resulting in the formation of block copolymer brushes. The PNIPAAm-b-ssDNA copolymer brushes formed supramolecular complexes stabilized by bio-multiple hydrogen bonds (BMHBs), which enhanced the proton transfer and thereby decreased the resistivity of the structures. In addition, the optimal operation window for DNA detection ranges from 0 to 0.2 M of NaCl concentration. Therefore, the specimens were prepared in the PBS solution at 150 mM NaCl concentration for target hybridization. The supramolecular complex state of the PNIPAAm-b-ssDNA copolymer brushes transformed into the phase-separated state after the hybridization with 0.5 ng/µL of its target DNA sequence owing to the competition between BMHBs and complementary hydrogen bonds. This phase transformation of the PNIPAAm and probe segments inhibited the proton transfer and significantly increased the resistivity at 25 °C. Moreover, there were no significant changes in the resistivity of the copolymer brushes after hybridization with the target sequence at 45 °C. These results indicated that the phase-separated state of the PNIPAAm-b-ssDNA copolymer brushes, which was generally occurred above the LCST, can be substantially generated after hybridization with its target DNA sequence. By performing the controlled experiments, in the same manner, using another sequence with lengths similar to that of the target sequence without complementarity. In addition, the sequences featuring various degrees of complementarity were exploited to verify the phase separation behavior inside the PNIPAAm-b-ssDNA copolymer thin film.

Supramolecular core-shell nanoparticles for photoconductive device applications.

We report a breakthrough discovery involving supramolecular-based strategies to construct novel core-shell heterojunction nanoparticles with hydrophilic adenine-functionalized polythiophene (PAT) as the core and hydrophobic phenyl-C61-butyric acid methyl ester (PCBM) as the shell, which enables the conception of new functional supramolecular assemblies for constructing functional nanomaterials for applications in optoelectronic devices. The generated nanoparticles exhibit uniform spherical shape, well-controlled tuning of particle size with narrow size distributions, and excellent electrochemical stability in solution and the solid state owing to highly efficient energy transfer from PAT to PCBM. When the PAT/PCBM nanoparticles were fabricated into a photoconducting layer in an electronic device, the resulting device showed excellent electric conduction characteristics, including an electrically-tunable voltage-controlled switch, and high short-circuit current and open-circuit voltage. These observations demonstrate how the self-assembly of PAT/PCBM into specific nanostructures may help to promote efficient charge generation and transport processes, suggesting potential for a wide variety of applications as a promising candidate material for bulk heterojunction polymer devices.

Hexagonal pillar structure of heteroepitaxial titania-vanadia nanocrystal films for high performance in thermochromic and photocatalytic properties.

In this study, we employed the mixture of titanium and vanadium sols with various ratios in WO3 and poly(vinylpyrrolidone) solution to generate the precursors of W-doped titania-vanadia composites. The heteroepitaxial W-doped titania-vanadia crystals (HWTVCs) with various structures were obtained after a calcination process at 700 °C for 3 h. The structure transformation of HWTVCs was highly relative to the ratio of titanium to vanadium sols. A hexagonal pillar structure was found at a ratio of 0.25 for titanium to vanadium sols. The scales of the hexagonal pillars could be apparently divided into two groups. The scale of one group ranged from 80 to 130 nm while the scale of the other ranged from 300 to 950 nm. The heteroepitaxial crystals with hexagonal pillar structure enhanced the visible transmittance, near-infrared switching efficiency and the ability to photocatalytically degrade the organic component under visible light irradiation. Such bifunctional (photocatalytic and thermochromic) nanomaterials might have applications in energy-saving smart windows.

Characterization of poly(N-isopropylacrylamide)-nucleobase supramolecular complexes featuring bio-multiple hydrogen bonds.

In this study we employed poly(N-isopropylacrylamide) (PNIPAAm) as a matrix that we hybridized with five different nucleobase units (adenine, thymine, uracil, guanine, cytosine) to generate PNIPAAm-nucleobase supramolecular complexes (PNSCs) stabilized through bio-multiple hydrogen bonds (BMHBs). These nucleobase units interacted with PNIPAAm through BMHBs of various strengths, leading to competition between the BMHBs and the intramolecular hydrogen bonds (HBs) of PNIPAAm. The changes in morphology, crystalline structure, and thermoresponsive behavior of PNIPAAm were related to the strength of its BMHBs with the nucleobases. The strengths of the BMHBs followed the order guanine > adenine > thymine > cytosine > uracil, as verified through analyses of Fourier transform infrared spectra, lower critical solution temperatures, and inter-association equilibrium constants. The PNSCs also exhibited remarkable improvements in conductivity upon the formation of BMHBs, which facilitated proton transport. The neat PNIPAAm film was an insulator, but it transformed into a semiconductor after hybridizing with the nucleobases. In particular, the resistivity of the PNIPAAm-guanine supramolecular complex decreased to 1.35 × 10(5) ohm cm. The resistivity of the PNIPAAm-cytosine supramolecular complex increased significantly from 5.83 × 10(6) to 3 × 10(8) ohm cm upon increasing the temperature from 40 to 50 °C, suggesting that this material might have applicability in thermo-sensing. The ability to significantly improve the conductivity of hydrogels through such a simple approach involving BMHBs might facilitate their use as novel materials in bioelectronics.

An Eco-Friendly Manner to Prepare Superwetting Melamine Sponges with Switchable Wettability for the Separation of Oil/Water Mixtures and Emulsions.

Oil/water separation processes have garnered significant global attention due to the quick growth in industrial development, recurring chemical leakages, and oil spills. Hence, there is a significant demand for the development of inexpensive superwetting materials in an eco-friendly manner to separate oil/water mixtures and emulsions. In this study, a superwetting melamine sponge (SMS) with switchable wettabilities was prepared by modifying melamine sponge (MS) with sodium dodecanoate. The as-prepared SMS exhibited superhydrophobicity, superoleophilicity, underwater superoleophobicity, and underoil superhydrophobicity. The SMS can be utilized in treating both light and heavy oil/water mixtures through the prewetting process. It demonstrated fast permeation fluxes (reaching 108,600 L m-2 h-1 for a light oil/water mixture and 147,700 L m-2 h-1 for a heavy oil/water mixture) and exhibited good separation efficiency (exceeding 99.56%). The compressed SMS was employed in separating surfactant-stabilized water-in-oil emulsions (SWOEs), as well as surfactant-stabilized oil-in-water emulsions (SOWEs), giving high permeation fluxes (reaching 7210 and 5054 L m-2 h-1, respectively). The oil purity for SWOEs' filtrates surpassed 99.98 wt% and the separation efficiencies of SOWEs exceeded 98.84%. Owing to their remarkable capability for separating oil/water mixtures and emulsions, eco-friendly fabrication method, and feasibility for large-scale production, our SMS has a promising potential for practical applications.

Hydrogen-bonded cytosine-endowed supramolecular polymeric nanogels: Highly efficient cancer cell targeting and enhanced therapeutic efficacy.

We demonstrate that cytosine moieties within physically cross-linked supramolecular polymers not only manipulate drug delivery and release, but also confer specific targeting of cancer cells to effectively enhance the safety and efficacy of chemotherapy-and thus hold significant potential as a new perspective for development of drug delivery systems. Herein, we successfully developed physically cross-linked supramolecular polymers (PECH-PEG-Cy) comprised of hydrogen-bonding cytosine pendant groups, hydrophilic poly(ethylene glycol) side chains, and a hydrophobic poly(epichlorohydrin) main chain. The polymers spontaneously self-assemble into a reversibly hydrogen-bonded network structure induced by cytosine and directly form spherical nanogels in aqueous solution. Nanogels with a high hydrogen-bond network density (i.e., a higher content of cytosine moieties) exhibit outstanding long-term structural stability in cell culture substrates containing serum, whereas nanogels with a relatively low hydrogen-bond network density cannot preserve their structural integrity. The nanogels also exhibit numerous unique physicochemical characteristics in aqueous solution, such as a desirable spherical size, high biocompatibility with normal and cancer cells, excellent drug encapsulation capacity, and controlled pH-responsive drug release properties. More importantly, in vitro experiments conclusively indicate the drug-loaded PECH-PEG-Cy nanogels can selectively induce cancer cell-specific apoptosis and cell death via cytosine receptor-mediated endocytosis, without significantly harming normal cells. In contrast, control drug-loaded PECH-PEG nanogels, which lack cytosine moieties in their structure, can only induce cell death in cancer cells through non-specific pathways, which significantly inhibits the induction of apoptosis. This work clearly demonstrates that the cytosine moieties in PECH-PEG-Cy nanogels confer selective affinity for the surface of cancer cells, which enhances their targeted cellular uptake, cytotoxicity, and subsequent induction of programmed cell death in cancer cells.

Bioinspired assembly of functional block-copolymer nanotemplates.

A new concept on bioinspired assembly of functional diblock copolymers, capable of forming different microstructures through nucleobase-induced supramolecular interactions, has been explored. In this paper, a new series of uracil-functionalized poly(ε-caprolactone)-b-(4-vinylbenzyl uracil)s (PCL-b-PVBU) have been prepared which exhibit a high self-complementary ability in solution and solid states owing to the formation of uracil­uracil pairs by induced hierarchical self-assembly. The ordered morphologies of PCL-b-PVBU diblock copolymers changed from a lamellar, hexagonally packed cylinder to a sphere with respect to the content of the hydrogen bond segment. Moreover, we further show that the PCL segment could be easily extracted by enzymatic degradation, leading to a cylinder porous structure of long-range order, which gives a facile method for the fabrication of uracil-functionalized nanotemplates. In addition, bio-complementary PCL-b-PVBU/9-hexadecyladenine (AC16) hierarchical supramolecular complexes formed through strong cooperative hydrogen bonding between the uracil group of PVBU and the adenine group of A-C16. When the mixing ratios of PCL-b-PVBU/AC16 differ from the stoichiometric ratio, these complexes self-assemble into well-ordered lamellar and hexagonal structures; the changing morphology at different AC16 loadings reveals that the molecular structures of the PCL-b-PVBU/AC16 complexes are readily tailored.

Fabrication of localized surface plasmon resonance sensors with scalable polyvinyltetrazole/copper cluster hybrid ring-array for Cu(II) detection.

The bottom of a hole-array photoresist template deposited with a hydrophobic atom-transfer radical polymerization (ATRP) initiator was wetted by treatment with oxygen plasma. After the removal of the photoresist template, ring patterns of the ATRP initiator were formed at the interface between the hydrophobic and wetting regions. Polyacrylonitrile (PAN) was grafted from the initiator ring array to covert to polyvinyltetrazole (PVT) rings via a cyano-to-tetrazole reaction, which could adsorb Cu(II) at various concentrations. The Cu(II) ions within the PVT rings were reduced to form a PVT-copper hybrid ring (VCHR), resulting in a blue-shift of the localized surface plasmon resonance (LSPR) peak as the Cu(II) was adsorbed by the PVT rings. The blue-shift and Cu(II) concentration were linearly correlated, with a detection limit of ∼25 pg mL-1 and a linear range of 25-400 pg mL-1 for Cu(II) detection. Although the PVT rings also chelated Pb(II) and Cr(III), these ions did not exhibit obvious LSPR peaks. The VCHR LSPR sensor exhibited excellent selectivity for Cu(II) detection. Combining lithography and plasma technology provides a versatile platform for developing the scalable ring structure of copper for highly sensitive and selective Cu(II) sensing.

Ultrafast absorption mechanism of oil-emulsified micelles onto ferrous absorbents with dielectrophoresis force in the presence of polarization.

Absorption and desorption rates were generally dependent on the concentration gradient from bulk to absorbents. A novel methodology based on a capacitor with an alternating electric field (AEF) is developed to accelerate the absorption and desorption rates with the frequency manipulation. Ferrous polystyrene microspheres (PISMs) are synthesized as absorbents, which could enhance the complex permittivities as well as dielectric properties. Theoretically, the attractive force and viscous force predominately determine the particle and micelles movement in the medium under an AEF. Oil-emulsified micelles (OEM) with various viscosities were selected as absorbates. Both the OEM and microspherical absorbents assembled through the external attractive force in the presence of the AEF. When the attractive force is equal to viscous force in the medium at the characteristic frequency, the optimal absorption rate could be obtained. The absorption rate constants of pseudo-first-order for OEMs under the polarization at 50 V and 120 kHz of frequency are ca. 10 times higher than that in absence of the polarization. The desorption rate as well as recycling efficiency could be also improved at 800 kHz. The ferrous PISMs with high complex permittivity prevented the damage from the AEF, which could be recycled 10 times of absorption and desorption with frequency manipulation under the AEF. Our methodology provides novel insights for ultrafast wastewater treatment.

Designable Poly(methacrylic Acid)/Silver Cluster Ring Arrays as Reflectance Spectroscopy-Based Biosensors for Label-Free Plague Diagnosis.

A hole array was fabricated via photolithography to wet the bottoms of holes using oxygen plasma. Amide-terminated silane, a water immiscible compound before hydrolysis, was evaporated for deposition on the plasma-treated hole template surface. The silane compound was hydrolyzed along the edges of circular sides of the hole bottom to form a ring of an initiator after halogenation. Poly(methacrylic acid) (PMAA) was grafted from the ring of the initiator to attract Ag clusters (AgCs) as AgC-PMAA hybrid ring (SPHR) arrays via alternate phase transition cycles. The SPHR arrays were modified with a Yersinia pestis antibody (abY) to detect the antigen of Yersinia pestis (agY) for plague diagnosis. The binding of the agY onto the abY-anchored SPHR array resulted in a geometrical change from a ring to a two-humped structure. The reflectance spectra could be used to analyze the AgC attachment and the agY binding onto the abY-anchored SPHR array. The linear range between the wavelength shift and agY concentration from 30 to 270 pg mL-1 was established to obtain the detection limit of ~12.3 pg mL-1. Our proposed method provides a novel pathway to efficiently fabricate a ring array with a scale of less than 100 nm, which demonstrates excellent performance in preclinical trials.

A CO2-Responsive Imidazole-Functionalized Fluorescent Material Mediates Cancer Chemotherapy.

We present a breakthrough in the synthesis and development of functional gas-responsive materials as highly potent anticancer agents suitable for applications in cancer treatment. Herein, we successfully synthesised a stimuli-responsive multifunctional material (I-R6G) consisting of a carbon dioxide (CO2)-sensitive imidazole moiety and spirolactam-containing conjugated rhodamine 6G (R6G) molecule. The resulting I-R6G is highly hydrophobic and non- or weakly fluorescent. Simple CO2 bubbling treatment induces hydrophobic I-R6G to completely dissolve in water and subsequently form self-assembled nanoparticles, which exhibit unique optical absorption and fluorescence behaviours in water and extremely low haemolytic ability against sheep red blood cells. Reversibility testing indicated that I-R6G undergoes reversible CO2/nitrogen (N2)-dependent stimulation in water, as its structural and physical properties can be reversibly and stably switched by alternating cycles of CO2 and N2 bubbling. Importantly, in vitro cellular assays clearly demonstrated that the CO2-protonated imidazole moiety promotes rapid internalisation of CO2-treated I-R6G into cancer cells, which subsequently induces massive levels of necrotic cell death. In contrast, CO2-treated I-R6G was not internalised and did not affect the viability of normal cells. Therefore, this newly created system may provide an innovative and efficient route to remarkably improve the selectivity, safety and efficacy of cancer treatment.

Inflammation-Responsive Nanovalves of Polymer-Conjugated Dextran on a Hole Array of Silicon Substrate for Controlled Antibiotic Release.

Poly(methacrylic acid) (PMAA) brushes were tethered on a silicon surface possessing a 500-nm hole array via atom transfer radical polymerization after the modification of the halogen group. Dextran-biotin (DB) was sequentially immobilized on the PMAA chains to obtain a P(MAA-DB) brush surrounding the hole edges on the silicon surface. After loading antibiotics inside the holes, biphenyl-4,4'-diboronic acid (BDA) was used to cross-link the P(MAA-DB) chains through the formation of boronate esters to cap the hole and block the release of the antibiotics. The boronate esters were disassociated with reactive oxygen species (ROS) to open the holes and release the antibiotics, thus indicating a reversible association. The total amount of drug inside the chip was approximately 52.4 µg cm-2, which could be released at a rate of approximately 1.6 µg h-1 cm-2 at a ROS concentration of 10 nM. The P(MAA-DB) brush-modified chip was biocompatible without significant toxicity toward L929 cells during the antibiotic release. The inflammation-triggered antibiotic release system based on a subcutaneous implant chip not only exhibits excellent efficacy against bacteria but also excellent biocompatibility, recyclability, and sensitivity, which can be easily extended to other drug delivery systems for numerous biomedical applications without phagocytosis- and metabolism-related issues.