RESUMEN
Coupling Weyl quasiparticles and charge density waves (CDWs) can lead to fascinating band renormalization and many-body effects beyond band folding and Peierls gaps. For the quasi-one-dimensional chiral compound (TaSe4)2I with an incommensurate CDW transition at TC = 263 K, photoemission mappings thus far are intriguing due to suppressed emission near the Fermi level. Models for this unconventional behavior include axion insulator phases, correlation pseudogaps, polaron subbands, bipolaron bound states, etc. Our photoemission measurements show sharp quasiparticle bands crossing the Fermi level at T > TC, but for T < TC, these bands retain their dispersions with no Peierls or axion gaps at the Weyl points. Instead, occupied band edges recede from the Fermi level, opening a spectral gap. Our results confirm localization of quasiparticles (holes created by photoemission) is the key physics, which suppresses spectral weights over an energy window governed by incommensurate modulation and inherent phase defects of CDW.
RESUMEN
Two-dimensional transition metal nitrides offer intriguing possibilities for achieving novel electronic and mechanical functionality owing to their distinctive and tunable bonding characteristics compared to other 2D materials. We demonstrate here the enabling effects of strong bonding on the morphology and functionality of 2D tungsten nitrides. The employed bottom-up synthesis experienced a unique substrate stabilization effect beyond van-der-Waals epitaxy that favored W5N6 over lower metal nitrides. Comprehensive structural and electronic characterization reveals that monolayer W5N6 can be synthesized at large scale and shows semimetallic behavior with an intriguing indirect band structure. Moreover, the material exhibits exceptional resilience against mechanical damage and chemical reactions. Leveraging these electronic properties and robustness, we demonstrate the application of W5N6 as atomic-scale dry etch stops that allow the integration of high-performance 2D materials contacts. These findings highlight the potential of 2D transition metal nitrides for realizing advanced electronic devices and functional interfaces.
RESUMEN
Glide-mirror symmetry in nonsymmorphic crystals can foster the emergence of novel hourglass nodal loop states. Here, we present spectroscopic signatures from angle-resolved photoemission of a predicted topological hourglass semimetal phase in Nb3SiTe6. Linear band crossings are observed at the zone boundary of Nb3SiTe6, which could be the origin of the nontrivial Berry phase and are consistent with a predicted glide quantum spin Hall effect; such linear band crossings connect to form a nodal loop. Furthermore, the saddle-like Fermi surface of Nb3SiTe6 observed in our results helps unveil linear band crossings that could be missed. In situ alkali-metal doping of Nb3SiTe6 also facilitated the observation of other band crossings and parabolic bands at the zone center correlated with accidental nodal loop states. Overall, our results complete the system's band structure, help explain prior Hall measurements, and suggest the existence of a nodal loop at the zone center of Nb3SiTe6.
RESUMEN
Molybdenum disulfide (MoS2) is one of the two-dimensional layered semiconductor transition metal dichalcogenides (TMDCs) with great potential in electronics, optoelectronics, and spintronic devices. Sulfur vacancies in MoS2 are the most prevalent defects. However, the effect of sulfur vacancies on the electronic structure of MoS2 is still in dispute. Here we experimentally and theoretically investigated the effect of sulfur vacancies in MoS2. The vacancies were intentionally introduced by thermal annealing of MoS2 crystals in a vacuum environment. Angle-resolved photoemission spectroscopy (ARPES) was used directly to observe the electronic structure of the MoS2 single crystals. The experimental result distinctly revealed the appearance of an occupied defect state just above the valence band maximum (VBM) and an upward shift of the VBM after creating sulfur vacancies. In addition, density functional theory (DFT) calculations also confirmed the existence of the occupied defect state close to the VBM as well as two deep unoccupied states induced by the sulfur vacancies. Our results provide evidence to contradict that sulfur vacancies indicate the origin of n-type behaviour in MoS2. This work provides a rational strategy for tuning the electronic structures of MoS2.
RESUMEN
Two-dimensional topological insulators (2D TIs) have distinct electronic properties that make them attractive for various applications, especially in spintronics. The conductive edge states in 2D TIs are protected from disorder and perturbations and are spin-polarized, which restrict current flow to a single spin orientation. In contrast, topological nodal line semimetals (TNLSM) are distinct from TIs because of the presence of a 1D ring of degeneracy formed from two bands that cross each other along a line in the Brillouin zone. These nodal lines are protected by topology and can be destroyed only by breaking certain symmetry conditions, making them highly resilient to disorder and defects. However, 2D TNLSMs do not possess protected boundary modes, which makes their investigation challenging. There have been several theoretical predictions of 2D TNLSMs, however, experimental realizations are rare. ß-Sn, a metallic allotrope of tin with a superconducting temperature of 3.72 K, may be a candidate for a topological superconductor that can host Majorana Fermions for quantum computing. In this work, single layers of α-Sn and ß-Sn on a Cu(111) substrate are successfully prepared and studied using scanning tunneling microscopy, angle-resolved photoemission spectroscopy, and density functional theory calculations. The lattice and electronic structure undergo a topological transition from 2D topological insulator α-Sn to 2D TNLSM ß-Sn, with two types of nodal lines coexisting in monolayer ß-Sn. Such a realization of two types of nodal lines in one 2D material has not been reported to date. Moreover, we also observed an unexpected phenomenon of freestanding-like electronic structures of ß-Sn/Cu(111), highlighting the potential of ultrathin ß-Sn films as a platform for exploring the electronic properties of 2D TNLSM and topological superconductors, such as few-layer superconducting ß-Sn in lateral contact with topological nodal line single-layer ß-Sn.
RESUMEN
Spin-to-charge conversion at the interface between magnetic materials and transition metal dichalcogenides has drawn great interest in the research efforts to develop fast and ultralow power consumption devices for spintronic applications. Here, we report room temperature observations of spin-to-charge conversion arising from the interface of Ni80Fe20 (Py) and molybdenum disulfide (MoS2). This phenomenon can be characterized by the inverse Edelstein effect length (λIEE), which is enhanced with decreasing MoS2 thicknesses, demonstrating the dominant role of spin-orbital coupling (SOC) in MoS2. The spin-to-charge conversion can be significantly improved by inserting a Cu interlayer between Py and MoS2, suggesting that the Cu interlayer can prevent magnetic proximity effect from the Py layer and protect the SOC on the MoS2 surface from exchange interactions with Py. Furthermore, the Cu-MoS2 interface can enhance the spin current and improve electronic transport. Our results suggest that tailoring the interface of magnetic heterostructures provides an alternative strategy for the development of spintronic devices to achieve higher spin-to-charge conversion efficiencies.
RESUMEN
Charge density waves (CDWs) involved with electronic and phononic subsystems simultaneously are a common quantum state in solid-state physics, especially in low-dimensional materials. However, CDW phase dynamics in various dimensions are yet to be studied, and their phase transition mechanism is currently moot. Here we show that using the distinct temperature evolution of orientation-dependent ultrafast electron and phonon dynamics, different dimensional CDW phases are verified in CuTe. When the temperature decreases, the shrinking of c-axis length accompanied with the appearance of interchain and interlayer interactions causes the quantum fluctuations (QF) of the CDW phase until 220 K. At T < 220 K, the CDWs on the different ab-planes are finally locked with each other in anti-phase to form a CDW phase along the c-axis. This study shows the dimension evolution of CDW phases in one CDW system and their stabilized mechanisms in different temperature regimes.
RESUMEN
Time-resolved angle-resolved photoemission spectroscopy (Tr-APRES) gives direct insight into electron dynamics by providing temporal-, energy-, and momentum-resolved information in one experiment. A major obstacle to using high harmonic generation (HHG) probe pulses for photoemission spectroscopy is the low conversion efficiency, that is, the low flux of probe photons. We use a Yb-KGW based duo-laser source with an oscillator to pump two separate amplifiers and generate two synchronized pulsed laser sources with average energies of 7.5 and 6 W. By using the multiplate continuum method and chirped mirrors, the resulting flux of HHG photons at 33-70 eV can be increased 50-fold (up to 1011 photons/s) by using post-compressed 30 fs pulses compared with the photon flux generated by the fundamental 190 fs pulses. Moreover, pulses from the 6 W amplifier are used to pump an optical parametric amplifier that can vary the wavelengths for photoexcitation. The system performance is demonstrated by applying Tr-ARPES to single-crystal graphite. The front tilt broadening is significantly suppressed by the off-plane mounted conical grating, leading to a 184 fs temporal resolution that is mainly limited by the pump pulse. The energy resolution is 176 meV.
RESUMEN
Using low-energy electron diffraction and angle-resolved photoemission spectroscopy, we investigated the lattice and electronic structures of the Pb(111) surface upon the adsorption of Au atoms at the low temperature T = 40 K. Unlike earlier results showing the formation of PbAu-alloy layers at room temperature, we found that Au atoms form a ultra-thin superstructure, Au/Pb(111)-3 × 3, on top of the Pb(111) surface. Moreover, three surface-state bands, S1, S2, and S3, are induced within and immediately adjacent to the Pb bulk projected band gap centered at the surface zone boundary [Formula: see text] at the energies of - 0.02, - 1.05, and - 2.56 eV, respectively. First-principles calculation based on Au/Pb(111)-3 × 3 confirms the measured surface-state bands among which the most interesting are the S1 and S3 surface states. They are derived from surface resonances in Pb(111). Moreover, S1, which disperses across Fermi level, exhibits a large anisotropic Rashba splitting with α of 1.0 and 3.54 eVÅ in the two symmetry directions centered at [Formula: see text]. The corresponding Rashba splitting of S1 band in Cu/Pb(111)-3 × 3 and Ag/Pb(111)-3 × 3 were calculated for comparison.
RESUMEN
Two interesting electronic transport properties including in-plane anisotropy and nonhomogeneous carrier distribution were observed in ReS2 nanoflakes. The electrical conductivity defined by the current parallel to the b-axis (âb) is 32 times higher than that perpendicular to the b-axis (â¥b). Similar anisotropy was also observed in optoelectronic properties in which the ratio of responsivity âb to â¥b reaches 20. In addition, conductivity and thermal activation energy with substantial thickness dependence were observed, which indicates a surface-dominant 2D transport in ReS2 nanoflakes. The presence of surface electron accumulation (SEA) in ReS2 has been confirmed by angle-resolved photoemission spectroscopy and scanning tunneling spectroscopy. The electron concentration (â¼1019 cm-3) at the surface is over three orders of magnitude higher than that of the bulks. Sulfur vacancies which are sensitive to air molecules are suggested to be the major factor resulting in SEA and high conductivity in ReS2 nanostructures.
RESUMEN
Finding d-electron heavy fermion states has been an important topic as the diversity in d-electron materials can lead to many exotic Kondo effect-related phenomena or new states of matter such as correlation-driven topological Kondo insulator. Yet, obtaining direct spectroscopic evidence for a d-electron heavy fermion system has been elusive to date. Here, we report the observation of Kondo lattice behavior in an antiferromagnetic metal, FeTe, via angle-resolved photoemission spectroscopy, scanning tunneling spectroscopy and transport property measurements. The Kondo lattice behavior is represented by the emergence of a sharp quasiparticle and Fano-type tunneling spectra at low temperatures. The transport property measurements confirm the low-temperature Fermi liquid behavior and reveal successive coherent-incoherent crossover upon increasing temperature. We interpret the Kondo lattice behavior as a result of hybridization between localized Fe 3dxy and itinerant Te 5pz orbitals. Our observations strongly suggest unusual cooperation between Kondo lattice behavior and long-range magnetic order.
RESUMEN
The magnetization measurement was performed in the Bi0.3Sb1.7Te3 single crystal. The magnetic susceptibility revealed a paramagnetic peak independent of the experimental temperature variation. It is speculated to be originated from the free-aligned spin texture at the Dirac point. The ARPES reveals that the Fermi level lies below the Dirac point. The Fermi wavevector extracted from the de Haas-van Alphen oscillation is consistent with the energy dispersion in the ARPES. Our experimental results support that the observed paramagnetic peak in the susceptibility curve does not originate from the free-aligned spin texture at the Dirac point.
RESUMEN
Lattice match is important for epitaxial growth. We show that a competing mechanism, electronic match, can dominate at small film thicknesses for metal-semiconductor systems, where quantum confinement and symmetry requirements may favor a different growth pattern. For Pb(111) on Ge(111), an accidental lattice match leads to a â3 × â3 configuration involving a 30° in-plane rotation at large film thicknesses, but it gives way to an incommensurate (1 × 1) configuration at small film thickness. The transformation follows an approximately inverse-film-thickness dependence with superimposed bilayer oscillations.
RESUMEN
Combination of low-dimensionality and electron correlation is vital for exotic quantum phenomena such as the Mott-insulating phase and high-temperature superconductivity. Transition-metal dichalcogenide (TMD) 1T-TaS2 has evoked great interest owing to its unique nonmagnetic Mott-insulator nature coupled with a charge-density-wave (CDW). To functionalize such a complex phase, it is essential to enhance the CDW-Mott transition temperature TCDW-Mott, whereas this was difficult for bulk TMDs with TCDW-Mott < 200 K. Here we report a strong-coupling 2D CDW-Mott phase with a transition temperature onset of ~530 K in monolayer 1T-TaSe2. Furthermore, the electron correlation derived lower Hubbard band survives under external perturbations such as carrier doping and photoexcitation, in contrast to the bulk counterpart. The enhanced Mott-Hubbard and CDW gaps for monolayer TaSe2 compared to NbSe2, originating in the lattice distortion assisted by strengthened correlations and disappearance of interlayer hopping, suggest stabilization of a likely nonmagnetic CDW-Mott insulator phase well above the room temperature. The present result lays the foundation for realizing monolayer CDW-Mott insulator based devices operating at room temperature.
RESUMEN
The intrinsic magnetic topological insulator MnBi2Te4 has attracted much attention due to its special magnetic and topological properties. To date, most reports have focused on bulk or flake samples. For material integration and device applications, the epitaxial growth of MnBi2Te4 film in nanoscale is more important but challenging. Here, we report the growth of self-regulated MnBi2Te4 films by the molecular beam epitaxy. By tuning the substrate temperature to the optimal temperature for the growth surface, the stoichiometry of MnBi2Te4 becomes sensitive to the Mn/Bi flux ratio. Excessive and deficient Mn resulted in the formation of a MnTe and Bi2Te3 phase, respectively. The magnetic measurement of the 7 SL MnBi2Te4 film probed by the superconducting quantum interference device (SQUID) shows that the antiferromagnetic order occurring at the Néel temperature 22 K is accompanied by an anomalous magnetic hysteresis loop along the c-axis. The band structure measured by angle-resolved photoemission spectroscopy (ARPES) at 80 K reveals a Dirac-like surface state, which indicates that MnBi2Te4 has topological insulator properties in the paramagnetic phase. Our work demonstrates the key growth parameters for the design and optimization of the synthesis of nanoscale MnBi2Te4 films, which are of great significance for fundamental research and device applications involving antiferromagnetic topological insulators.
RESUMEN
Understanding characteristic energy scales is a fundamentally important issue in the study of strongly correlated systems. In multiband systems, an energy scale is affected not only by the effective Coulomb interaction but also by the Hund's coupling. Direct observation of such energy scale has been elusive so far in spite of extensive studies. Here, we report the observation of a kink structure in the low energy dispersion of NiS2-xSex and its characteristic evolution with x, by using angle resolved photoemission spectroscopy. Dynamical mean field theory calculation combined with density functional theory confirms that this kink originates from Hund's coupling. We find that the abrupt deviation from the Fermi liquid behavior in the electron self-energy results in the kink feature at low energy scale and that the kink is directly related to the coherence-incoherence crossover temperature scale. Our results mark the direct observation of the evolution of the characteristic temperature scale via kink features in the spectral function, which is the hallmark of Hund's physics in the multiorbital system.
RESUMEN
Antimonene is a promising two-dimensional (2D) material that is calculated to have a significant fundamental bandgap usable for advanced applications such as field-effect transistors, photoelectric devices, and the quantum-spin Hall (QSH) state. Herein, we demonstrate a phenomenon termed topological proximity effect, which occurs between a 2D material and a three-dimensional (3D) topological insulator (TI). We provide strong evidence derived from hydrogen etching on Sb2Te3 that large-area and well-ordered antimonene presents a 2D topological state. Delicate analysis with a scanning tunneling microscope of the evolutionary intermediates reveals that hydrogen etching on Sb2Te3 resulted in the formation of a large area of antimonene with a buckled structure. A topological state formed in the antimonene/Sb2Te3 heterostructure was confirmed with angle-resolved photoemission spectra and density-functional theory calculations; in particular, the Dirac point was located almost at the Fermi level. The results reveal that Dirac fermions are indeed realized at the interface of a 2D normal insulator (NI) and a 3D TI as a result of strong hybridization between antimonene and Sb2Te3. Our work demonstrates that the position of the Dirac point and the shape of the Dirac surface state can be tuned by varying the energy position of the NI valence band, which modifies the direction of the spin texture of Sb-BL/Sb2Te3 via varying the Fermi level. This topological phase in 2D-material engineering has generated a paradigm in that the topological proximity effect at the NI/TI interface has been realized, which demonstrates a way to create QSH systems in 2D-material TI heterostructures.
RESUMEN
Mid-infrared (MIR) light sources have much potential in the study of Dirac-fermions (DFs) in graphene and topological insulators (TIs) because they have a low photon energy. However, the topological surface state transitions (SSTs) in Dirac cones are veiled by the free carrier absorption (FCA) with same spectral line shape that is always seen in static MIR spectra. Therefore, it is difficult to distinguish the SST from the FCA, especially in TIs. Here, we disclose the abnormal MIR spectrum feature of transient reflectivity changes (ΔR/R) for the non-equilibrium states in TIs, and further distinguish FCA and spin-momentum locked SST using time-resolved and linearly polarized ultra-broadband MIR spectroscopy with no environmental perturbation. Although both effects produce similar features in the reflection spectra, they produce completely different variations in the ΔR/R to show their intrinsic ultrafast dynamics.
RESUMEN
Two-dimensional (2D) topological insulators (TIs) have attracted a lot of attention owing to their striking optical nonlinearity. However, the ultra-low saturable intensity (SI) of TIs resulting from the bulk conduction band limits their applications, such as in mode-locking solid-state lasers. In this work, through fabricating a graphene/Bi2Te3 heterojunction which combines monolayer graphene and a Bi2Te3 nanoplate, the optical nonlinearities are analyzed. Moreover, the thickness-dependent characteristics are also investigated by varying the thickness of the Bi2Te3 when synthesizing the heterojunctions. Furthermore, with the aid of the estimated junction electron escape time, a model of the photo-excited carrier-transfer mechanism is proposed and used to describe the phenomena of depression of ultra-low saturable absorption (SA) from the Bi2Te3 bulk band. The increased modulation depth of the graphene/Bi2Te3 heterojunction can accordingly be realized in more detail. In addition, a Q-switched solid-state laser operating at 1064 nm with heterojunction saturable absorbers is built up and characterized for validating the proposed model. The laser performance with varied Bi2Te3 thickness, such as pulse duration and repetition rate, agrees quite well with our proposed model. Our work demonstrates the functionality of optical nonlinear engineering by tuning the thickness of the graphene/Bi2Te3 heterojunction and demonstrates its potential for applications.