RESUMEN
In wells that operate by electrical submersible pump (ESP), the use of automation tools becomes essential in the interpretation of data. However, the fact that the wells work with automated systems does not guarantee the early diagnosis of operating conditions. The analysis of amperimetric charts is one of the ways to identify fail conditions. Generally, the analysis of these histographics is performed by operators who are often overloaded, generating a decrease in the efficiency of observing the well operating conditions. Currently, technologies based on machine learning (ML) algorithms create solutions to early diagnose abnormalities in the well's operation. Thus, this work aims to provide a proposal for detecting the operating conditions of the ESP pump from electrical current data from 24 wells in the city of Mossoró, Rio Grande do Norte state, Brazil. The algorithms used were Decision Tree, Support Vector Machine, K-Nearest Neighbor and Neural Network. The algorithms were tested without and with hyperparameter tuning based on a training dataset. The results confirm that the application of the ML algorithm is feasible for classifying the operating conditions of the ESP pump, as all had an accuracy greater than 87%, with the best result being the application of the SVM model, which reached an accuracy of 93%.
Asunto(s)
Algoritmos , Aprendizaje Automático , Redes Neurales de la Computación , Máquina de Vectores de Soporte , Diagnóstico PrecozRESUMEN
Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO4], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO4] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.
Asunto(s)
Contaminantes Ambientales/química , Hierro/química , Naftalenos/química , Suelo , Brasil , Compuestos Ferrosos , Oxidación-Reducción , Sulfatos , AguaRESUMEN
The present work investigates the conjugation of flotation and photo-Fenton techniques on oil removal performance from oilfield produced water. The experiments were conducted in a column flotation and annular lamp reactor for induced air flotation and photodegradation steps, respectively. A nonionic surfactant was used as a flotation agent. The flotation experimental data were analyzed in terms of a first-order kinetic rate model. Two experimental designs were employed to evaluate the oil removal efficiency: fractional experimental design and central composite rotational design (CCRD). Overall oil removal of 99% was reached in the optimum experimental condition after 10 min of flotation followed by 45 min of photo-Fenton. The results of the conjugation of induced air flotation and photo-Fenton processes allowed meeting the wastewater limits established by the legislations for disposal.
Asunto(s)
Industria Procesadora y de Extracción/métodos , Agua Subterránea/química , Petróleo/análisis , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/aislamiento & purificación , Peróxido de Hidrógeno , Hierro , Cinética , Modelos Químicos , Fotólisis , Tensoactivos , Contaminantes Químicos del Agua/análisisRESUMEN
An artificial neural network (ANN) was implemented for modeling phenol mineralization in aqueous solution using the photo-Fenton process. The experiments were conducted in a photochemical multi-lamp reactor equipped with twelve fluorescent black light lamps (40 W each) irradiating UV light. A three-layer neural network was optimized in order to model the behavior of the process. The concentrations of ferrous ions and hydrogen peroxide, and the reaction time were introduced as inputs of the network and the efficiency of phenol mineralization was expressed in terms of dissolved organic carbon (DOC) as an output. Both concentrations of Fe(2+) and H2O2 were shown to be significant parameters on the phenol mineralization process. The ANN model provided the best result through the application of six neurons in the hidden layer, resulting in a high determination coefficient. The ANN model was shown to be efficient in the simulation of phenol mineralization through the photo-Fenton process using a multi-lamp reactor.
Asunto(s)
Reactores Biológicos , Luz , Modelos Teóricos , Redes Neurales de la Computación , Fenol/químicaRESUMEN
The photo-Fenton process was applied to degrade non-ionic surfactants with different numbers of ethoxy groups, seven (E7), ten (E10) and twenty-three (E23). The effects of H2O2 concentration, Fe(II) concentration and number of ethoxy groups on the mineralization of surfactants were investigated. The response surface methodology (RSM) was applied to determine optimal concentrations of Fenton's reagents for each surfactant. The efficiency of the photo-Fenton process reached 95% for all surfactants studied at 45 min in optimal conditions determined in this work. The analysis of results showed that the efficiency depends upon the number of ethoxy groups in the surfactant. The increase in ethoxy groups favoured the mineralization of surfactants. The analysis of variance (ANOVA) was applied, and according to the F-test the models for the mineralization of surfactants were considered significant and predictable. The photo-Fenton process has proven to be feasible for the degradation of ethoxylated surfactants in aqueous solution.
Asunto(s)
Éteres de Etila/química , Alcoholes Grasos/química , Fotólisis , Tensoactivos/química , Peróxido de Hidrógeno/química , Hierro/químicaRESUMEN
In this work, iron-bearing mining reject was employed as an alternative and potential low-cost catalyst to degrade phenol in water by photo-Fenton strategy. Various techniques, including SEM-EDS, BET, FTIR, and XRD, were applied to evaluate the material's properties. Process parameters such as hydrogen peroxide concentration, catalyst dosage, and pH were studied to determine the optimum reaction conditions ([catalyst] = 0.75 g L-1, [H2O2] = 7.5 mM, and pH = 3). Phenol degradation and mineralization efficiencies at 180 and 300 min were 96.5 and 78%, respectively. These satisfactory results can be associated with the iron amount present in the waste sample. Furthermore, the material showed high catalytic activity and negligible iron leaching even after the fourth reuse cycle. The degradation behavior of phenol in water was well represented by a kinetic model based on the Fermi function. The iron-bearing mining reject can be considered a potential photo-Fenton catalyst for phenol degradation in wastewater.
RESUMEN
CuO/ZnO coupled oxide films were electrodeposited onto an aluminum substrate and tested as photocatalysts in degradation of phenol molecules in aqueous solution under sunlight. The obtained films were characterized by X-ray diffraction, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The results showed that the photocatalytic activity of films was significant, especially to coupled oxide film with a CuO/ZnO ratio equal to 0.697, which presented about 70% degradation of the aromatic molecules and 42% of total organic carbon (TOC) removal at 300 min under solar irradiation. Therefore, this work highlights the potential application of CuO/ZnO coupled oxide films obtained by electrodeposition onto aluminum substrate in the field of photocatalysis.
Asunto(s)
Cobre/química , Galvanoplastia/métodos , Fenoles/química , Fotoquímica/métodos , Luz Solar , Óxido de Zinc/química , CatálisisRESUMEN
Hydrochlorothiazide (HCT) is a pharmaceutical micropollutant highly toxic to the environment, being absolutely necessary to oxidize it completely to CO2. Here, the variables stoichiometric H2O2 excess for (a) degradation and (b) mineralization are defined and used as metric to quantify the dosimetry of the H2O2. So that, dose of H2O2 qualifies being under- and over-dose respectively for values below and above such standards. In this work, these concepts have been elucidated across AOPs regarding the H2O2 degradation excess, whereas only UVC-Fenton was used regarding the H2O2 mineralization excess. At a H2O2 mineralization excess of 0.68 (equivalent to degradation excess of 36.74), oxidation via UVC-H2O2 enables absolute (100%) HCT degradation within 60 min; however, the mineralization of HCT demonstrated limited optimization for all AOPs employed in the beaker-like reactor of this work, being the underlying reasons investigated hereby. At best, 26.70% HCT mineralization was observed within 60 min of UVC photo-Fenton using an initial 2.00 H2O2 mineralization excess. Such mineralization of 26.7% is unexpectedly low considering that, in addition, the residual H2O2 concentration almost fully depletes within 30 min of UVC-Fenton oxidation. Taken all that together, the loss of H2O2 due its decomposition induced by the risen temperature from 28 to 70ºC very likely were the underlying reason preventing better mineralization performance. We successfully demonstrated 18% of mean efficiency of radical â¢OH consumption signals that the overheating is indeed a designer problem with the photo-reactor since a well-refrigerated photo-reactor shows a mean efficiency of 38% for the same H2O2 excess.
Asunto(s)
Peróxido de Hidrógeno , Contaminantes Químicos del Agua , Hierro , Oxidación-Reducción , Temperatura , Contaminantes Químicos del Agua/análisisRESUMEN
In this study, coal bottom ash from a thermoelectric plant was tested as an alternative Fenton catalyst for phenol degradation in water. The effect of operating parameters such as initial pH, catalyst dosage and H2O2 concentration were evaluated. The characterization results indicated that the material has a mesoporous structure, with active species (Fe) well distributed on its surface. Under the optimal reaction conditions (6 mM H2O2, 1 g L-1 of catalyst and pH = 3), 98.7% phenol degradation efficiency was achieved in 60 min, as well as 71.6% TOC removal after 150 min. Hydroxyl radical was identified as the main oxidizing agent involved on the cleavage of the phenol molecule. After four consecutive reuse cycles, phenol degradation efficiency was around 80%, indicating good reusability and stability of the catalyst. Therefore, the obtained results demonstrated that the bottom ash presents remarkable activity for application in the Fenton reaction towards phenol degradation.
Asunto(s)
Ceniza del Carbón , Fenol , Fenol/química , Peróxido de Hidrógeno/química , Oxidación-Reducción , Fenoles , Agua , CatálisisRESUMEN
In this work, CoFe2O4/TiO2 nanostructure was prepared through a facile and effective solvothermal route for efficient use in the degradation of the Erionyl Red A-3G model pollutant under ultraviolet irradiation. Characterization analysis indicated the successful heterojunction among the precursors. The composite presented band gap value of 2.75 eV, being smaller than that of the pristine TiO2, as well as mesoporous structure. The catalytic activity of nanostructure was investigated by employing a 22 factorial experimental design with 3 central points. The optimized reaction conditions were set as pH = 2 and catalyst dosage = 1.0 g L-1 for an initial pollutant concentration of 20 mg L-1. The prepared nanohybrid presented remarkable catalytic activity, reaching color removal efficiency of 95.39% after 15 min, as well as total organic carbon (TOC) removal of 69.4% after 120 min. The kinetic studies of TOC removal followed the pseudo-first order model, with a rate constant of 0.10 min-1. Moreover, the nanostructure presented magnetic behavior, being easily separated from the aqueous medium through the use of a simple external magnetic field.
Asunto(s)
Contaminantes Ambientales , Rayos Ultravioleta , Cinética , Titanio/química , CatálisisRESUMEN
A highly concentrated aqueous saline-containing solution of phenol, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4-dichlorophenol (2,4-DCP) was treated by the photo-Fenton process in a system composed of an annular reactor with a quartz immersion well and a medium-pressure mercury lamp (450 W). The study was conducted under special conditions to minimize the costs of acidification and neutralization, which are usual steps in this type of process. Photochemical reactions were carried out to investigate the influence of some process variables such as the initial concentration of Fe(2+) ([Fe(2+)](0)) from 1.0 up to 2.5 mM, the rate in mmol of H(2)O(2) fed into the system (FH(2)O(2);in) from 3.67 up to 7.33 mmol of H(2)O(2)/min during 120 min of reaction time, and the initial pH (pH(0)) from 3.0 up to 9.0 in the presence and absence of NaCl (60.0 g/L). Although the optimum pH for the photo-Fenton process is about 3.0, this particular system performed well in experimental conditions starting at alkaline and neutral pH. The results obtained here are promising for industrial applications, particularly in view of the high concentration of chloride, a known hydroxyl radical scavenger and the main oxidant present in photo-Fenton processes.
Asunto(s)
Ácido 2,4-Diclorofenoxiacético/química , Clorofenoles/química , Herbicidas/química , Peróxido de Hidrógeno/química , Hierro/química , Fenol/química , Eliminación de Residuos Líquidos/métodos , Catálisis , Compuestos Ferrosos/química , Concentración de Iones de Hidrógeno , Oxidación-Reducción , Cloruro de Sodio/química , Eliminación de Residuos Líquidos/economíaRESUMEN
Produced water, a mixture of inorganic and organic components, comprises the largest effluent stream from oil and gas activities. The removal of contaminants from this wastewater is receiving special attention of the researchers since most of them are persistent and difficult to remove with simple techniques. Several technologies from conventional to advanced oxidation processes have been employed to treat produced water. However, the achievement of greater efficiency may be conditioned to a combination of different wastewater treatment techniques. Hereupon, the present paper discusses three important aspects regarding produced water treatment: analytical methods used for characterization, relevant aspects regarding photochemical systems used for advanced oxidation processes, and combined techniques for treating oil field wastewaters. Analytical methods employed for the quantification of the main species contained in produced water are presented for a proper characterization. Photochemical aspects of the reaction systems such as operating conditions, types of irradiation sources, and technical details of reactors are also addressed. Finally, research papers concerning combined treatment techniques are discussed focusing on the essential contributions. Thus, this manuscript aims to assist in the development of novel techniques and the improvement of produced water treatment to obtain a high-quality treated effluent and reduce environmental impacts.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Yacimiento de Petróleo y Gas , Oxidación-Reducción , Eliminación de Residuos Líquidos , Aguas Residuales/análisis , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
The presence of toxic chlorinated compounds in drinking water, generated during the disinfection step in water treatment plants, is of great concern for public health. In the present study, the performance of the UVC/H2O2 process, preceded by zero-valent-copper reduction, was evaluated for degrading 2,4,6-trichlorophenol (TCP). With this aim, the oxidation performed alone or in combination with the pre-reductive step was evaluated regarding TCP concentration over time, removal rate, mineralization, and toxicity to Vibrio fischeri, as well as oxidant dosage and the effect of water matrix. The UV/H2O2 process achieved fast (kobs = 1.4 min-1) and complete TCP degradation, as well as important mineralization (40.4%), with best results obtained for initial H2O2 concentration of 0.056 mmol L-1. Coupling of reductive and oxidative processes intensified contaminant mineralization, due to the synergistic effect of copper ions leached in the reductive process, particularly Cu(I), providing an additional route of H2O2 activation for generating HO⢠radicals (photo-Fenton-like process). High toxicity removals and increased mineralization could be successfully accomplished by the combined processes even in tap water, which is a clear advantage for practical application.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Clorofenoles , Cobre , Peróxido de Hidrógeno , Oxidación-Reducción , Rayos Ultravioleta , AguaRESUMEN
Emerging pollutants have been the subject of worldwide study because their continuous entry into the environment presents a risk to ecosystems and human health. Advanced oxidation processes show promise for eliminating or reducing the concentrations of emerging pollutants in water. This study aimed to investigate the treatment of aqueous systems containing the synthetic hormone 17α-ethinylestradiol. An innovative method for persulfate activation catalysed by iron-modified diatomite (heterogeneous system) was compared to conventional homogeneous activation methods (iron activation, alkaline activation, and heat activation). Iron-modified diatomite was more efficient in activating persulfate than traditional processes, achieving 98% of pollutant removal. Experimental results indicated that the catalyst can be reused without loss of removal efficiency, with potential environmental and economic benefits.
Asunto(s)
Hierro , Contaminantes Químicos del Agua , Tierra de Diatomeas , Ecosistema , Etinilestradiol , Humanos , Oxidación-Reducción , Sulfatos , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
The application of the photo-Fenton process for the treatment of wastewaters contaminated with diesel oil was investigated. This particular process has been widely studied for the photochemical degradation of highly toxic organic pollutants. Experiments were performed according to a factorial experimental design at two levels and two variables: H(2)O(2) concentration (5-200 mM) and Fe(2+) concentration (0.01-1 mM). Experimental results demonstrated that the photo-Fenton process is technically feasible for the treatment of wastewaters containing diesel oil constituents, with total mineralization. A combination of factorial experimental design and gradient descent techniques was employed to optimize the amount of the Fenton reagents, resulting in Fe(2+) (0.1 mM) and H(2)O(2) (50 mM). These optimized levels did not exceed the limit for disposal of ferrous ions (0.27 mM) proposed at the local environmental legislation.
Asunto(s)
Gasolina/análisis , Peróxido de Hidrógeno/química , Hierro/química , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Fotoquímica , Purificación del Agua/instrumentaciónRESUMEN
A solvothermal method was used to prepare zinc ferrite spinel oxide (ZnFe2O4) using ethylene glycol and 1,4 butanediol as solvent diols, and the influence of diols on the physical properties of ZnFe2O4 particles was investigated. The produced particles were characterized by X-ray powder diffraction (XRD), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption isotherms, and the catalytic activity for the organic pollutant decomposition by heterogeneous photo-Fenton reaction was investigated. Both solvents produced particles with cubic spinel structure. Microporous and mesoporous structures were obtained when ethylene glycol and 1,4 butanediol were used as diols, respectively. A higher pore volume and surface area, as well as a higher catalytic activity for the pollutant degradation were found when 1,4 butanediol was used as solvent.
RESUMEN
Produced water in oil fields is one of the main sources of wastewater generated in the industry. It contains several organic compounds, such as benzene, toluene, ethyl benzene and xylene (BTEX), whose disposal is regulated by law. The aim of this study is to investigate a treatment of produced water integrating two processes, i.e., induced air flotation (IAF) and photo-Fenton. The experiments were conducted in a column flotation and annular lamp reactor for flotation and photodegradation steps, respectively. The first order kinetic constant of IAF for the wastewater studied was determined to be 0.1765 min(-1) for the surfactant EO 7. Degradation efficiencies of organic loading were assessed using factorial planning. Statistical data analysis shows that H(2)O(2) concentration is a determining factor in process efficiency. Degradations above 90% were reached in all cases after 90 min of reaction, attaining 100% mineralization in the optimized concentrations of Fenton reagents. Process integration was adequate with 100% organic load removal in 20 min. The results of the integration of the IAF with the photo-Fenton allowed to meet the effluent limits established by Brazilian legislation for disposal.
Asunto(s)
Peróxido de Hidrógeno/química , Hierro/química , Contaminantes Químicos del Agua/análisis , Xilenos/análisis , Aire , FotoquímicaRESUMEN
RESUMO: Nesse trabalho, objetivou-se recuperar o óleo presente na borra oleosa por processo de extração, a fim de reutilizá-lo como combustível. Foram aplicados dois planejamentos experimentais: fatorial fracionado e Doehlert. Através da caracterização da borra oleosa (análises físico-químicos, elementar CHN e S, orgânicas e inorgânicas), constatou-se que a borra oleosa utilizada é constituída de 36,2% de óleo, 16,8% de cinzas, 40% de água e 7% de compostos voláteis. A eficiência média do processo de extração foi 70%. Entretanto, a análise estatística mostrou que o modelo quadrático não se ajustou bem ao processo, devido à complexidade do material estudado. Por outro lado, aplicando-se a modelagem de RNA, o coeficiente de determinação foi de 87,5%, mostrando-se bastante satisfatório.
ABSTRACT: This work aimed to recover the oil present in oily sludge by extraction process in order to reuse it as fuel. Two experimental designs were applied: fractional factorial and Doehlert. Through characterization of the oily sludge (physico-chemical analysis, CHN and S elemental, inorganic and organic), it was found that the oily sludge used consists of 36.2% oil, 16.8% ash, 40% water and 7% volatile compounds. The efficiency obtained in the oil extraction process was 70%, in average. However, statistical analysis showed that the quadratic model did not satisfactorily the process due to the complexity of the studied material. By the other hand, applying ANN the coefficient of determination became 87.5% that is quite satisfactory.
RESUMEN
The application of the photo-Fenton process to the treatment of saline wastewater contaminated with hydrocarbons is investigated. Aqueous saline solutions containing raw gasoline were used as a model oil-field-produced water. The dependence on concentrations of the following reagents has been appropriately evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM), and sodium chloride (200-2000 ppm). The reactions were monitored by measurement of the absorption spectra and total organic carbon (TOC). Experimental results demonstrate that the photo-Fenton process is feasible for the treatment of wastewaters containing hydrocarbons, even in the presence of high concentrations of salt. The effect of the salt in this process is described through a series of reactions. A simple feedforward neural network model was found to correlate well the observed data for the degradation process.
Asunto(s)
Hidrocarburos/aislamiento & purificación , Peróxido de Hidrógeno/química , Hierro/química , Oxidantes/química , Eliminación de Residuos Líquidos/métodos , Contaminantes del Agua/aislamiento & purificación , Purificación del Agua/métodos , Hidrocarburos/química , Redes Neurales de la Computación , Fotoquímica , Cloruro de SodioRESUMEN
The photo-Fenton process utilizes ferrous ions (Fe2+), hydrogen peroxide (H2O2), and ultraviolet (UV) irradiation as a source of hydroxyl radicals for the oxidation of organic matter present in aqueous effluents. The cost associated with the use of artificial irradiation sources has hindered industrial application of this process. In this work, the applicability of solar radiation for the photodegradation of raw gasoline in water has been studied. The photo-Fenton process was also applied to a real effluent, i.e., oil-field-produced water, and the experimental results demonstrate the feasibility of employing solar irradiation to degrade this complex saturated-hydrocarbon-containing system.