RESUMEN
The coordination chemistry of various fission and decay products, such as actinides and lanthanides, are crucial to the commercial deployment of molten salt reactors as they can affect the thermophysical properties. Here, we examined the structure, coordination environment, and physical properties such as the density and the vibrational density of states for three lanthanide species, namely Ce, Eu, and Sm in the LiCl-KCl eutectic system using a combination of quantum mechanics simulations and spectroscopic experiments. Quantum mechanics molecular dynamics (QM-MD) modelling was employed to determine the physical properties of each system resulting in accurate local coordination of each species. Then, the vibrational density of states (DOS) was determined using a two-phase thermodynamic modelling which was then compared to the experimentally obtained Raman spectra of the species in molten LiCl-KCl having the eutectic composition. We find that Ce3+, Eu3+ and Sm3+ all adopt octahedral local coordination environments in the eutectic salt composition in good agreement with experimental results. Ce3+ is found to fluctuate between an octahedral six-coordinated and a seven-coordinated structure due to the increased local proximity of Cl in the eutectic salt, resulting in a lower fluidicity/diffusivity than the other trivalent lanthanides studied. The thermophysical properties of the eutectic composition with trivalent lanthanides were not significantly different from the pure eutectic salt composition, but several changes were noted.
RESUMEN
This study demonstrates solar driven oxidation of hydrazine hydrate and the simultaneous production of hydrogen and electricity in photoelectrochemical cells and photofuel cells, respectively, using a visible light active molybdenum doped BiVO4 photoelectrode. The developed photoelectrodes exhibited tremendous efficiency towards anodic oxidation of hydrous hydrazine with continuous and stable hydrogen evolution at the Pt cathode under benign pH and zero bias conditions. Significantly, the photofuel cell containing hydrazine hydrate fuel has generated electricity with a high open circuit potential of 0.8 V. The presence of bicarbonate ions in the electrolyte has played a significant role in enhancing the kinetics of photoelectrochemical oxidation of hydrazine and improved the hydrogen and electricity generation efficiency thus avoiding the integration of an oxidation electrocatalyst. In addition, molybdenum doped BiVO4 as a possible photoelectrochemical hydrazine sensor has been investigated and the electrode photocurrent was found to be linearly dependent on the concentration of the hydrazine hydrate in the range of 20-90 mM with a correlation coefficient of 0.9936.
Asunto(s)
Bismuto/química , Suministros de Energía Eléctrica , Hidrazinas/química , Hidrógeno/química , Molibdeno/química , Vanadatos/química , Electricidad , Técnicas Electroquímicas/instrumentación , Electrodos , Diseño de Equipo , Luz , Oxidación-Reducción , Procesos Fotoquímicos , Platino (Metal)/químicaRESUMEN
Currently, there is a lack of reliable measurement techniques for understanding the basicity of molten chloride salts. Optical basicity, an ultraviolet-visible (UV-vis) spectroscopic method for measuring Lewis basicity, is explored for its applicability to molten chloride salts. Shifts in probe ion (Pb2+ and Bi3+) electronic transitions are observed that show that cations in chloride salts follow the same basicity series as in oxide melts, and an increase in basicity is observed with increasing temperature. Pb2+ and Bi3+ are validated as effective probe ions in alkali, alkaline earth, and aluminum-sodium chloride molten salts. However, the utility of Bi3+ is limited by the volatility of BiCl3 at high temperatures, posing a challenge for use in high-temperature molten salt applications. Since optical basicity measures the extent of electron donation, it may be a useful metric for electrochemical corrosion.
RESUMEN
The capture of long-lived radioactive iodine (129I) from oxidizing off-gasses produced from reprocessing used nuclear fuel is paramount to human health and environmental safety. Bismuth has been investigated as a viable iodine getter but the phase stability of bismuth-based sorbents in an oxidizing environment have not yet been researched. In the current work, bismuth nanoparticle-based sorbents, as free particles (Bi-NPs) and embedded within silica xerogel monoliths made with a porogen (TEO-5), were exposed to I2(g) before and after aging in 1 v/v% NO2 at 150 °C. For unaged sorbents, BiI3 was the dominant phase after iodine capture with 8-30 mass% BiOI present due to native Bi2O3 on the surface of the unaged nanoparticles. After 3 h of aging, 82 mass% of the Bi-NPs was converted to Bi2O3 with only a small amount of iodine captured as BiOI (18 mass%). After aging TEO-5 for 3 h, iodine was captured as both BiI3 (26 %) and BiOI (74 %) and no Bi2O3 was detected.". Additionally, bismuth lining the micrometer-scale pores in the TEO-5 led to enhanced iodine capture. In a subsequent exposure of the sorbents to NO2 (secondary aging), all BiI3 converted to BiOI. Thus, direct capture of iodine as BiOI is desired (over BiI3) to minimize loss of iodine after capture.
Asunto(s)
Yodo , Nanopartículas , Neoplasias de la Tiroides , Humanos , Bismuto , Dióxido de Nitrógeno , Dióxido de Silicio , Radioisótopos de Yodo , EnvejecimientoRESUMEN
Although microbes have been used in industrial and niche applications for several decades, successful immobilization of microbes while maintaining their usefulness for any desired application has been elusive. Such a functionally bioactive system has distinct advantages over conventional batch and continuous-flow microbial reactor systems that are used in various biotechnological processes. This article describes the use of polyethylene oxide(99)-polypropylene oxide(67)-polyethylene oxide(99) triblock polymer fibers, created via electrospinning, to encapsulate microbes of 3 industrially relevant genera, namely, Pseudomonas, Zymomonas, and Escherichia. The presence of bacteria inside the fibers was confirmed by fluorescence microscopy and SEM. Although the electrospinning process typically uses harsh organic solvents and extreme conditions that generally are harmful to bacteria, we describe techniques that overcome these limitations. The encapsulated microbes were viable for several months, and their metabolic activity was not affected by immobilization; thus they could be used in various applications. Furthermore, we have engineered a microbe-encapsulated cross-linked fibrous polymeric material that is insoluble. Also, the microbe-encapsulated active matrix permits efficient exchange of nutrients and metabolic products between the microorganism and the environment. The present results demonstrate the potential of the electrospinning technique for the encapsulation and immobilization of bacteria in the form of a synthetic biofilm, while retaining their metabolic activity. This study has wide-ranging implications in the engineering and use of novel bio-hybrid materials or biological thin-film catalysts.
Asunto(s)
Electroquímica/métodos , Escherichia coli/citología , Polietilenglicoles/química , Pseudomonas fluorescens/citología , Zymomonas/citología , Biopelículas , Células Inmovilizadas , Escherichia coli/fisiología , Escherichia coli/ultraestructura , Microbiología Industrial/métodos , Viabilidad Microbiana , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Pseudomonas fluorescens/fisiología , Pseudomonas fluorescens/ultraestructura , Factores de Tiempo , Zymomonas/fisiología , Zymomonas/ultraestructuraRESUMEN
The catalytic properties of various metal nanoparticles have led to their use in environmental remediation. Our aim is to develop and apply an efficient bioremediation method based on in situ biosynthesis of bio-Pd nanoparticles and hydrogen. C. pasteurianum BC1 was used to reduce Pd(II) ions to form Pd nanoparticles (bio-Pd) that primarily precipitated on the cell wall and in the cytoplasm. C. pasteurianum BC1 cells, loaded with bio-Pd nanoparticle in the presence of glucose, were subsequently used to fermentatively produce hydrogen and to effectively catalyze the removal of soluble Cr(VI) via reductive transformation to insoluble Cr(III) species. Batch and aquifer microcosm experiments using C. pasteurianum BC1 cells loaded with bio-Pd showed efficient reductive Cr(VI) removal, while in control experiments with killed or viable but Pd-free bacterial cultures no reductive Cr(VI) removal was observed. Our results suggest a novel process where the in situ microbial production of hydrogen is directly coupled to the catalytic bio-Pd mediated reduction of chromate. This process offers significant advantages over the current groundwater treatment technologies that rely on introducing preformed catalytic nanoparticles into groundwater treatment zones and the costly addition of molecular hydrogen to above ground pump and treat systems.
Asunto(s)
Cromatos/metabolismo , Clostridium/metabolismo , Hidrógeno/metabolismo , Nanopartículas del Metal , Paladio/química , Biocatálisis , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Oxidación-ReducciónRESUMEN
The rare earth element cerium has been known to exert antifungal and antibacterial properties in the oxidation states +III and +IV. This study reports on an innovative strategy for virus removal in drinking water by the combination of Ce(III) on a bacterial carrier matrix. The biogenic cerium (bio-Ce) was produced by addition of aqueous Ce(III) to actively growing cultures of either freshwater manganese-oxidizing bacteria (MOB) Leptothrix discophora or Pseudomonas putida MnB29. X-ray absorption spectroscopy results indicated that Ce remained in its trivalent state on the bacterial surface. The spectra were consistent with Ce(III) ions associated with the phosphoryl groups of the bacterial cell wall. In disinfection assays using a bacteriophage as model, it was demonstrated that bio-Ce exhibited antiviral properties. A 4.4 log decrease of the phage was observed after 2 h of contact with 50 mg L(-1) bio-Ce. Given the fact that virus removal with 50 mg L(-1) Ce(III) as CeNO(3) was lower, the presence of the bacterial carrier matrix in bio-Ce significantly enhanced virus removal.
Asunto(s)
Bacteriófagos/aislamiento & purificación , Cerio/metabolismo , Leptothrix/metabolismo , Pseudomonas putida/metabolismo , Biodegradación Ambiental , Biomasa , Manganeso/metabolismo , Oxidación-Reducción , Pseudomonas putida/ultraestructura , Solubilidad , Factores de Tiempo , Inactivación de Virus , Espectroscopía de Absorción de Rayos XRESUMEN
Saccharomyces cerevisiae immobilized in electrospun Pluronic F127 dimethacrylate (FDMA) was successfully employed for the production of ethanol in an immobilized cell reactor. Yeast cells were immobilized into fibers formed through the process of electrospinning and cross-linking. The threads had an average diameter of 0.88 µm and were used in continuous-flow immobilized cell reactors. The immobilized cell reactors were able to maintain a high ethanol yield of >90% from day 4 through to the end of the time course at day 14. The reactor was able to achieve a maximum ethanol yield of 94.3%. This study shows that the use of electrospinning is a promising method for continuous ethanol production through immobilized cell-based continuous flow reactors.
Asunto(s)
Reactores Biológicos , Células Inmovilizadas/metabolismo , Etanol/metabolismo , Metacrilatos/metabolismo , Poloxámero/metabolismo , Saccharomyces cerevisiae/metabolismo , Etanol/química , Fermentación , Metacrilatos/química , Tamaño de la Partícula , Poloxámero/química , Propiedades de SuperficieRESUMEN
The production of nanoparticles through biosynthesis is a reliable, non-toxic, and sustainable alternative to conventional chemical and physical methods of production. While noble metals, such as palladium, gold, and silver, have been formed via bioreduction, biologically-induced reduction of electroactive elements to a metallic state has not been reported previously. Herein, we report the reduction of an electroactive element, molybdenum, via microbial reduction using Clostridium pasteurianum. C. pasteurianum was able to reduce 88% of the added Mo6+ ions. The bioreduced molybdenum was shown to be metallically bonded in a prototypical crystal structure with an average particle size of 15â¯nm. C. pasteurianum was previously shown to degrade azo dyes using in situ formed Pd nanoparticles, but this study shows that in situ formed Mo particles also act as catalysts for degradation of azo dyes. C. pasteurianum cultures with the bioformed Mo nanoparticles were able completely degrade 155⯵M methyl orange within 6â¯min, while controls with no Mo took 36â¯min. This research demonstrates, for the first time, that the bioreduction of active elements and formation of catalytic particles is achievable.
Asunto(s)
Compuestos Azo/metabolismo , Clostridium/fisiología , Molibdeno/metabolismo , Compuestos Azo/química , Biocatálisis , Nanopartículas del Metal/química , Molibdeno/químicaRESUMEN
Zymomonas mobilis immobilized in doped calcium alginate (Ca-alginate) was successfully employed for the production of ethanol in an immobilized cell reactor. Polyethylene oxide and F127 dimethacrylate were evaluated as potential dopants for Ca-alginate beads to decrease lag time and increase initial ethanol yield. The influence of the type and concentration of the dopant on the effectiveness of the microbe immobilized in Ca-alginate beads to produce ethanol was studied, and results were compared to the widely used 2 % Ca-alginate with no dopants, which acted as control. Immobilized cell reactors that were operated using beads doped with 0.25 % polyethylene oxide (PEO) reached an ethanol yield of â¼70 % in 24 h, which was significantly higher than an ethanol yield of 25 % obtained for the control reactor operated using undoped Ca-alginate beads. This study shows that the use of water-soluble dopants can potentially reduce the lag phase and thus improve the initial production yield of immobilized cell reactors, likely due to an increase in porosity and diffusion rate of the doped beads.
Asunto(s)
Reactores Biológicos , Células Inmovilizadas/química , Etanol/síntesis química , Zymomonas/química , Alginatos/química , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Polietilenglicoles/química , Agua/químicaRESUMEN
Molten mixtures of lithium chloride and metallic lithium are of significant interest in various metal oxide reduction processes. These solutions have been reported to exhibit seemingly anomalous physical characteristics that lack a comprehensive explanation. In the current work, the physical chemistry of molten solutions of lithium chloride and metallic lithium, with and without lithium oxide, was investigated using in situ Raman spectroscopy. The Raman spectra obtained from these solutions were in agreement with the previously reported spectrum of the lithium cluster, Li8. This observation is indicative of a nanofluid type colloidal suspension of Li8 in a molten salt matrix. It is suggested that the formation and suspension of lithium clusters in lithium chloride is the cause of various phenomena exhibited by these solutions that were previously unexplainable.