Successful kinetic impact into an asteroid for planetary defence.

Although no known asteroid poses a threat to Earth for at least the next century, the catalogue of near-Earth asteroids is incomplete for objects whose impacts would produce regional devastation1,2. Several approaches have been proposed to potentially prevent an asteroid impact with Earth by deflecting or disrupting an asteroid1-3. A test of kinetic impact technology was identified as the highest-priority space mission related to asteroid mitigation1. NASA's Double Asteroid Redirection Test (DART) mission is a full-scale test of kinetic impact technology. The mission's target asteroid was Dimorphos, the secondary member of the S-type binary near-Earth asteroid (65803) Didymos. This binary asteroid system was chosen to enable ground-based telescopes to quantify the asteroid deflection caused by the impact of the DART spacecraft4. Although past missions have utilized impactors to investigate the properties of small bodies5,6, those earlier missions were not intended to deflect their targets and did not achieve measurable deflections. Here we report the DART spacecraft's autonomous kinetic impact into Dimorphos and reconstruct the impact event, including the timeline leading to impact, the location and nature of the DART impact site, and the size and shape of Dimorphos. The successful impact of the DART spacecraft with Dimorphos and the resulting change in the orbit of Dimorphos7 demonstrates that kinetic impactor technology is a viable technique to potentially defend Earth if necessary.

One-year clinical outcomes of MR-guided stereotactic body radiation therapy with rectal spacer for patients with localized prostate cancer.

BACKGROUND AND PURPOSE: This prospective study aimed to investigate adaptive magnetic resonance (MR)-guided stereotactic body radiation therapy (MRgSBRT) with rectal spacer for localized prostate cancer (PC) and report 1-year clinical outcomes. MATERIALS AND METHODS: Thirty-four consecutive patients with low- to high-risk localized PC that underwent 5-fraction adaptive MRgSBRT with rectal spacer were enrolled. The dosimetric comparison was performed on a risk- and age-matched cohort treated with MRgSBRT but without a spacer at a similar timepoint. Clinician-reported outcomes were based on Common Terminology Criteria for Adverse Events. Patient-reported outcomes were based on the Expanded Prostate Cancer Index Composite (EPIC) questionnaire at baseline, acute (1-3 months), subacute (4-12 months), and late (> 12 months) phases. RESULTS: The median follow-up was 390 days (range 28-823) and the median age was 70 years (range 58-82). One patient experienced rectal bleeding soon after spacer insertion that subsided before MRgSBRT. The median distance between the midline of the prostate midgland and the rectum after spacer insertion measured 7.8 mm (range 2.6-15.3), and the median length of the spacer was 45.9 mm (range 16.8-62.9) based on T2-weighted MR imaging. The use of spacer resulted in significant improvements in target coverage (V100% > 95% = 98.6% [range 93.4-99.8] for spacer vs. 97.8% [range 69.6-99.7] for non-spacer) and rectal sparing (V95% < 3 cc = 0.7 cc [range 0-4.6] for spacer vs. 4.9 cc [range 0-12.5] for non-spacer). Nine patients (26.5%) experienced grade 1 gastrointestinal toxicities, and no grade ≥ 2 toxicities were observed. During the 1-year follow-up period, EPIC scores for the bowel domain remained stable and were the highest among all other domains. CONCLUSIONS: MRgSBRT with rectal spacer for localized PC showed exceptional tolerability with minimal gastrointestinal toxicities and satisfactory patient-reported outcomes. Improvements in dosimetry, rectal sparing, and target coverage were achieved with a rectal spacer. Randomized trials are warranted for further validation.

Application of a dual-modality colorimetric analysis method to inkjet printing lateral flow detection of Salmonella typhimurium.

Lateral flow assay (LFA) color signal quantification methods were developed by utilizing both International Commission on Illumination (CIE) LAB (CIELAB) color space and grayscale intensity differences. The CIELAB image processing procedure included calibration, test, control band detection, and color difference calculation, which can minimize the noise from the background. The LFA platform showcases its ability to accurately discern relevant colorimetric signals. The rising occurrence of infectious outbreaks from foodborne pathogens like Salmonella typhimurium presents significant economic, healthcare, and public health risks. The study introduces an aptamer-based lateral flow (ABLF) platform by using inkjet printing for specially detecting S. typhimurium. The ABLF utilized gold-decorated polystyrene microparticles, functionalized with specific S. typhimurium aptamers (Ps-AuNPs-ssDNA). The platform demonstrates a detection limit of 102 CFU mL-1 in buffer solutions and 103 CFU mL-1 in romaine lettuce tests. Furthermore, it sustained performance for over 8 weeks at room temperature. The ABLF platform and analysis methods are expected to effectively resolve the low-sensitivity problems of the former LFA systems and to bridge the gap between lab-scale platforms to market-ready solutions by offering a simple, cost-effective, and consistent approach to detecting foodborne pathogens in real samples.

A scaling law of particle transport in inkjet-printed particle-laden polymeric drops.

Hydrogels with embedded functional particulates are widely used to create soft materials with innovative functionalities. In order to advance these soft materials to functional devices and machines, critical technical challenges are the precise positioning of particulates within the hydrogels and the construction of the hydrogels into a complex geometry. Inkjet printing is a promising method for addressing these challenges and ultimately achieving hydrogels with voxelized functionalities, so-called digital hydrogels. However, the development of the inkjet printing process primarily relies on empirical optimization of its printing and curing protocol. In this study, a general scaling law is proposed to predict the transport of particulates within the hydrogel during inkjet printing. This scaling law is based on a hypothesis that water-matrix interaction during the curing of inkjet-printed particle-laden polymeric drops determines the intra-drop particle distribution. Based on the hypothesis, a dimensionless similarity parameter of the water-matrix interaction is proposed, determined by the hydrogel's water evaporation coefficient, particle size, and mechanical properties. The hypothesis was tested by correlating the intra-drop particle distribution to the similarity parameter. The results confirmed the scaling law capable of guiding ink formulation and printing and curing protocol.

Inkjet Printed Nanopatterned Aptamer-Based Sensors for Improved Optical Detection of Foodborne Pathogens.

The increasing incidence of infectious outbreaks from contaminated food and water supply continues imposing a global burden for food safety, creating a market demand for on-site, disposable, easy-to-use, and cost-efficient devices. Despite of the rapid growth of biosensors field and the generation of breakthrough technologies, more than 80% of the platforms developed at lab-scale never will get to meet the market. This work aims to provide a cost-efficient, reliable, and repeatable approach for the detection of foodborne pathogens in real samples. For the first time an optimized inkjet printing platform is proposed taking advantage of a carefully controlled nanopatterning of novel carboxyl-functionalized aptameric ink on a nitrocellulose substrate for the highly efficient detection of E. coli O157:H7 (25 colony forming units (CFU) mL-1 in pure culture and 233 CFU mL-1 in ground beef) demonstrating the ability to control the variation within ±1 SD for at least 75% of the data collected even at very low concentrations. From the best of the knowledge this work reports the lowest limit of detection of the state of the art for paper-based optical detection of E. coli O157:H7, with enough evidence (p > 0.05) to prove its high specificity at genus, species, strain, and serotype level.

High-speed and high-accuracy 3D surface measurement using a mechanical projector.

This paper presents a method to achieve high-speed and high-accuracy 3D surface measurement using a custom-designed mechanical projector and two high-speed cameras. We developed a computational framework that can achieve absolute shape measurement in sub-pixel accuracy through: 1) capturing precisely phase-shifted fringe patterns by synchronizing the cameras with the projector; 2) generating a rough disparity map between two cameras by employing a standard stereo-vision method using texture images with encoded statistical patterns; and 3) utilizing the wrapped phase as a constraint to refine the disparity map. The projector can project binary patterns at a speed of up to 10,000 Hz, and the camera can capture the required number of phase-shifted fringe patterns with 1/10,000 second, and thus 3D shape measurement can be realized as high as 10,000 Hz regardless the number of phase-shifted fringe patterns required for one 3D reconstruction. Experimental results demonstrated the success of our proposed method.

Flight mechanics and control of escape manoeuvres in hummingbirds. II. Aerodynamic force production, flight control and performance limitations.

The superior manoeuvrability of hummingbirds emerges from complex interactions of specialized neural and physiological processes with the unique flight dynamics of flapping wings. Escape manoeuvring is an ecologically relevant, natural behaviour of hummingbirds, from which we can gain understanding into the functional limits of vertebrate locomotor capacity. Here, we extend our kinematic analysis of escape manoeuvres from a companion paper to assess two potential limiting factors of the manoeuvring performance of hummingbirds: (1) muscle mechanical power output and (2) delays in the neural sensing and control system. We focused on the magnificent hummingbird (Eugenes fulgens, 7.8 g) and the black-chinned hummingbird (Archilochus alexandri, 3.1 g), which represent large and small species, respectively. We first estimated the aerodynamic forces, moments and the mechanical power of escape manoeuvres using measured wing kinematics. Comparing active-manoeuvring and passive-damping aerodynamic moments, we found that pitch dynamics were lightly damped and dominated by the effect of inertia, while roll dynamics were highly damped. To achieve observed closed-loop performance, pitch manoeuvres required faster sensorimotor transduction, as hummingbirds can only tolerate half the delay allowed in roll manoeuvres. Accordingly, our results suggested that pitch control may require a more sophisticated control strategy, such as those based on prediction. For the magnificent hummingbird, we estimated that escape manoeuvres required muscle mass-specific power 4.5 times that during hovering. Therefore, in addition to the limitation imposed by sensorimotor delays, muscle power could also limit the performance of escape manoeuvres.

Flight mechanics and control of escape manoeuvres in hummingbirds. I. Flight kinematics.

Hummingbirds are nature's masters of aerobatic manoeuvres. Previous research shows that hummingbirds and insects converged evolutionarily upon similar aerodynamic mechanisms and kinematics in hovering. Herein, we use three-dimensional kinematic data to begin to test for similar convergence of kinematics used for escape flight and to explore the effects of body size upon manoeuvring. We studied four hummingbird species in North America including two large species (magnificent hummingbird, Eugenes fulgens, 7.8 g, and blue-throated hummingbird, Lampornis clemenciae, 8.0 g) and two smaller species (broad-billed hummingbird, Cynanthus latirostris, 3.4 g, and black-chinned hummingbirds Archilochus alexandri, 3.1 g). Starting from a steady hover, hummingbirds consistently manoeuvred away from perceived threats using a drastic escape response that featured body pitch and roll rotations coupled with a large linear acceleration. Hummingbirds changed their flapping frequency and wing trajectory in all three degrees of freedom on a stroke-by-stroke basis, likely causing rapid and significant alteration of the magnitude and direction of aerodynamic forces. Thus it appears that the flight control of hummingbirds does not obey the 'helicopter model' that is valid for similar escape manoeuvres in fruit flies. Except for broad-billed hummingbirds, the hummingbirds had faster reaction times than those reported for visual feedback control in insects. The two larger hummingbird species performed pitch rotations and global-yaw turns with considerably larger magnitude than the smaller species, but roll rates and cumulative roll angles were similar among the four species.

Engineering biomaterials by inkjet printing of hydrogels with functional particulates.

Hydrogels with particulates, including proteins, drugs, nanoparticles, and cells, enable the development of new and innovative biomaterials. Precise control of the spatial distribution of these particulates is crucial to produce advanced biomaterials. Thus, there is a high demand for manufacturing methods for particle-laden hydrogels. In this context, 3D printing of hydrogels is emerging as a promising method to create numerous innovative biomaterials. Among the 3D printing methods, inkjet printing, so-called drop-on-demand (DOD) printing, stands out for its ability to construct biomaterials with superior spatial resolutions. However, its printing processes are still designed by trial and error due to a limited understanding of the ink behavior during the printing processes. This review discusses the current understanding of transport processes and hydrogel behaviors during inkjet printing for particulate-laden hydrogels. Specifically, we review the transport processes of water and particulates within hydrogel during ink formulation, jetting, and curing. Additionally, we examine current inkjet printing applications in fabricating engineered tissues, drug delivery devices, and advanced bioelectronics components. Finally, the challenges and opportunities for next-generation inkjet printing are also discussed.

Prostate diffusion-weighted imaging (DWI) in MR-guided radiotherapy: Reproducibility assessment on 1.5 T MR-Linac and 1.5 T MR-simulator.

PURPOSE: Diffusion-weighted imaging (DWI) holds promise for image-guided radiotherapy (MRgRT) in prostate cancer. However, challenges persist due to image distortion, artifacts, and apparent diffusion coefficient (ADC) reproducibility issues. This study aimed to assess DWI image quality and ADC reproducibility on both a 1.5 T MR-simulator and a 1.5 T MR-Linac, employing measurements from both an ACR MRI phantom and prostate cancer patients undergoing MRgRT. METHODS: DW-MRI scans were conducted on 19 patients (mean age = 69 ± 8 years, with 23 MR-visible intra-prostatic lesions) and an ACR MRI phantom using a 1.5 T MR-simulator (b-values = 0, 800, 1400s/mm2) and a 1.5 T MR-Linac (b-values = 50, 500, 800 s/mm2). ADC homogeneity in the phantom was evaluated via 1D profile flatness (FL) in three directions. Image quality was assessed through qualitative 5-point Likert scale ratings and quantitative ADC and signal-to-noise ratio (SNR) measurements. Intra-observer reproducibility of image quality scores was evaluated using ICC(1, 2). Geometric distortion was measured by comparing landmark sizes on the ACR phantom against the ground truth. Mean ADC and reproducibility were assessed using Bland-Altman plots. RESULTS: Both MR-simulator and MR-Linac demonstrated high ADC homogeneity (FL > 87.5% - MR-simulator: 97.23 ± 0.62%, MR-Linac: 94.75 ± 0.62%, p < 0.05) in the phantom. Image quality scores revealed acceptable ratings (≥3) for capsule demarcation, image artifacts, and geometric distortion in patients. However, intra-prostatic lesions were barely discernible in b800 images for both MR-simulator (average score = 2.37 ± 1.33) and MR-Linac (average score = 2.16 ± 1.28). While MR-Linac DWI scans exhibited significantly more severe geometric distortion than MR-simulator scans (p < 0.01), most phantom measurements fell within the image in-plane resolution of 3 mm. Significant differences were noted in MR-simulator ADC (CTV: 1.20 ± 0.14 × 10-3 mm2/s (MR-simulator) vs 1.06 ± 0.10 × 10-3 mm2/s (MR-Linac); GTV: 1.05 ± 0.21 × 10-3 mm2/s vs 0.91 ± 0.16 × 10 mm2/s, all p < 0.05), with a small non-zero bias observed in the Bland-Altman analysis (CTV: 12.3%; GTV: 14.5%). CONCLUSION: The significantly larger MR-simulator ADC and the small non-zero bias hint at potential systematic differences in ADC values acquired from an MR-simulator and an MR-Linac, both at 1.5 T. Although acceptable ADC homogeneity was noted, caution is warranted in interpreting MR-Linac DWI images due to occasional severe artifacts. Further studies are essential to validate DWI and ADC as reliable imaging markers in prostate cancer MRgRT.

An analysis of the impact of different levels of inspiratory volume using active breathing control on the intrafraction motion and dose coverage of target volumes in patients undergoing thoracic radiotherapy.

PURPOSE: To determine whether the level of inspiratory volume affect the extent to which active breathing control (ABC) reduces intrafraction motion and the dose coverage of target volumes in patients receiving external beam radiation therapy (EBRT) to the thoracic region MATERIALS/METHODS: 20 patients undergoing thoracic radiotherapy enrolled in a prospective study using ABC for respiratory motion management and volumetric-modulated arc therapy (VMAT) as the treatment technique. They were randomized to one of two groups, the control group of 80% inspiratory volume and the other test group of 70%. At least one set of repeated CBCTs was done weekly. All images including CBCTs and Planning CTs were sent to MIM softwareTM for analysis of intrafraction motion using Dice Similarity Coefficient (DSC). The target dose conformality was assessed using conformation number (CN). Intention-to-treat analysis was employed for statistical purpose. RESULTS: The DSC for the 70% and 80% inspiratory volume group were 0.93 and 0.92, respectively. For the 70% group, there was a significant negative correlation (p < 0.05) between DSC and time between two CBCTs, but not for the 80% group. The average percentage change in CN for the 70% and 80% group was 10.91% and 8.14%, respectively, and their difference was significant (p < 0.05). Furthermore, the actual change in volume had a significant positive correlation (p < 0.05) with the percentage change in CN for the 70% inspiratory volume group but not the 80% group. CONCLUSION: More evidence suggests that the target volumes from the 80% inspiratory volume group have less intrafraction motion compared to the 70% group. The findings from the percentage change in CN suggest that there could potentially be less tumor motion for higher levels of inspiratory volume and this could possibly contribute to why intrafraction motion is less for the 80% inspiratory volume group.

Analysis of online plan adaptation for 1.5T magnetic resonance-guided stereotactic body radiotherapy (MRgSBRT) of prostate cancer.

PURPOSE: To analyze and characterize the online plan adaptation of 1.5T magnetic resonance-guided stereotactic body radiotherapy (MRgSBRT) of prostate cancer (PC). METHODS: PC patients (n = 107) who received adaptive 1.5 Tesla MRgSBRT were included. Online plan adaptation was implemented by either the adapt-to-position (ATP) or adapt-to-shape (ATS) methods. Patients were assigned to the ATS group if they underwent ≥ 1 ATS fraction (n = 51); the remainder were assigned to the ATP group (n = 56). The online plan adaptation records of 535 (107 × 5) fractions were retrospectively reviewed. Rationales for ATS decision-making were determined and analyzed using predefined criteria. Statistics of ATS fractions were summarized. Associations of patient characteristics and clinical factors with ATS utilization were investigated. RESULTS: There were 87 (16.3%) ATS fractions and 448 ATP fractions (83.7%). The numbers of ATS adoptions in fractions 1-5 were 29 (29/107, 27.1%), 18 (16.8%), 15 (14.0%), 16 (15.0%), and 9 (8.4%), respectively, with significant differences in adoption frequency between fractions (p = 0.007). Other baseline patient characteristics and clinical factors were not significantly associated with ATS classification (all p > 0.05). Underlying criteria for the determination of ATS implementation comprised anatomical changes (77 fractions in 50 patients) and discrete multiple targets (15 fractions in 3 patients). No ATS utilization was determined using dosimetric or online quality assurance criteria. CONCLUSIONS: This study contributes to facilitating the establishment of a standardized protocol for online MR-guided adaptive radiotherapy in PC.

Inkjet-printed morphogenesis of tumor-stroma interface using bi-cellular bioinks of collagen-poly(N-isopropyl acrylamide-co-methyl methacrylate) mixture.

Recent advances in biomaterials and 3D printing/culture methods enable various tissue-engineered tumor models. However, it is still challenging to achieve native tumor-like characteristics due to lower cell density than native tissues and prolonged culture duration for maturation. Here, we report a new method to create tumoroids with a mechanically active tumor-stroma interface at extremely high cell density. This method, named "inkjet-printed morphogenesis" (iPM) of the tumor-stroma interface, is based on a hypothesis that cellular contractile force can significantly remodel the cell-laden polymer matrix to form densely-packed tissue-like constructs. Thus, differential cell-derived compaction of tumor cells and cancer-associated fibroblasts (CAFs) can be used to build a mechanically active tumor-stroma interface. In this methods, two kinds of bioinks are prepared, in which tumor cells and CAFs are suspended respectively in the mixture of collagen and poly (N-isopropyl acrylamide-co-methyl methacrylate) solution. These two cellular inks are inkjet-printed in multi-line or multi-layer patterns. As a result of cell-derived compaction, the resulting structure forms tumoroids with mechanically active tumor-stroma interface at extremely high cell density. We further test our working hypothesis that the morphogenesis can be controlled by manipulating the force balance between cellular contractile force and matrix stiffness. Furthermore, this new concept of "morphogenetic printing" is demonstrated to create more complex structures beyond current 3D bioprinting techniques.

Invited review: integration of technologies and systems for precision animal agriculture-a case study on precision dairy farming.

Precision livestock farming (PLF) offers a strategic solution to enhance the management capacity of large animal groups, while simultaneously improving profitability, efficiency, and minimizing environmental impacts associated with livestock production systems. Additionally, PLF contributes to optimizing the ability to manage and monitor animal welfare while providing solutions to global grand challenges posed by the growing demand for animal products and ensuring global food security. By enabling a return to the "per animal" approach by harnessing technological advancements, PLF enables cost-effective, individualized care for animals through enhanced monitoring and control capabilities within complex farming systems. Meeting the nutritional requirements of a global population exponentially approaching ten billion people will likely require the density of animal proteins for decades to come. The development and application of digital technologies are critical to facilitate the responsible and sustainable intensification of livestock production over the next several decades to maximize the potential benefits of PLF. Real-time continuous monitoring of each animal is expected to enable more precise and accurate tracking and management of health and well-being. Importantly, the digitalization of agriculture is expected to provide collateral benefits of ensuring auditability in value chains while assuaging concerns associated with labor shortages. Despite notable advances in PLF technology adoption, a number of critical concerns currently limit the viability of these state-of-the-art technologies. The potential benefits of PLF for livestock management systems which are enabled by autonomous continuous monitoring and environmental control can be rapidly enhanced through an Internet of Things approach to monitoring and (where appropriate) closed-loop management. In this paper, we analyze the multilayered network of sensors, actuators, communication, networking, and analytics currently used in PLF, focusing on dairy farming as an illustrative example. We explore the current state-of-the-art, identify key shortcomings, and propose potential solutions to bridge the gap between technology and animal agriculture. Additionally, we examine the potential implications of advancements in communication, robotics, and artificial intelligence on the health, security, and welfare of animals.

Precision technologies are revolutionizing animal agriculture by enhancing the management of animal welfare and productivity. To fully realize the potential benefits of precision livestock farming (PLF), the development and application of digital technologies are needed to facilitate the responsible and sustainable intensification of livestock production over the next several decades. Importantly, the digitalization of agriculture is expected to provide collateral benefits of ensuring audibility in value chains while assuaging concerns associated with labor shortages. In this paper, we analyze the multilayered network of sensors, actuators, communication, and analytics currently in use in PLF. We analyze the various aspects of sensing, communication, networking, and intelligence on the farm leveraging dairy farms as an example system. We also discuss the potential implications of advancements in communication, robotics, and artificial intelligence on the security and welfare of animals.

Clinical implementation of kVCT-guided tomotherapy with ClearRT.

A helical fan-beam kilovoltage computed tomography (kVCT) was recently introduced into Tomotherapy units. This study aims to share the initial experience of kVCT in clinical workflow, compare its performance with that of the existing megavoltage computed tomography (MVCT), and explore its potential in adaptive planning. We retrospectively enrolled 23 patients who underwent both MVCT and kVCT scans. The clinical performance data regarding image acquisition time, nominal dose length product (DLP), registration time and registration corrections were extracted and compared. Image quality was scored by six experienced radiation therapists and quantified based on phantom measurements. CT number stability and the implementation of adaptive radiotherapy were dosimetrically evaluated by performing the dose recalculation on kVCT. Compared to MVCT, kVCT significantly reduced DLP (except the highest kVp protocol), image acquisition and registration time. KVCT obtained higher scores than MVCT on all criteria except artifacts. Phantom measurements also revealed a better image performance characterization of kVCT except for image uniformity. The CT number variation could lead to a dose difference of 0.5% for D95% of target and Dmean of organ-at-risk. For the treatment planning with kVCT, a systematic dose difference (> 1%) in PTV dose metrics was observed at regions with large longitudinal density discontinuities compared to the reference plans. The new kVCT imaging provides enhanced soft-tissue visualization. The improved efficiency with kVCT-guided treatment will allow more patients to be treated each day. In most cases, the dose calculation accuracy of kVCT images is acceptable except for regions with severe artifacts.

A Prospective Study of Stereotactic Body Radiotherapy (SBRT) with Concomitant Whole-Pelvic Radiotherapy (WPRT) for High-Risk Localized Prostate Cancer Patients Using 1.5 Tesla Magnetic Resonance Guidance: The Preliminary Clinical Outcome.

Background: Conventionally fractionated whole-pelvic nodal radiotherapy (WPRT) improves clinical outcome compared to prostate-only RT in high-risk prostate cancer (HR-PC). MR-guided stereotactic body radiotherapy (MRgSBRT) with concomitant WPRT represents a novel radiotherapy (RT) paradigm for HR-PC, potentially improving online image guidance and clinical outcomes. This study aims to report the preliminary clinical experiences and treatment outcome of 1.5 Tesla adaptive MRgSBRT with concomitant WPRT in HR-PC patients. Materials and methods: Forty-two consecutive HR-PC patients (72.5 ± 6.8 years) were prospectively enrolled, treated by online adaptive MRgSBRT (8 Gy(prostate)/5 Gy(WPRT) × 5 fractions) combined with androgen deprivation therapy (ADT) and followed up (median: 251 days, range: 20−609 days). Clinical outcomes were measured by gastrointestinal (GI) and genitourinary (GU) toxicities according to the Common Terminology Criteria for Adverse Events (CTCAE) Scale v. 5.0, patient-reported quality of life (QoL) with EPIC (Expanded Prostate Cancer Index Composite) questionnaire, and prostate-specific antigen (PSA) responses. Results: All MRgSBRT fractions achieved planning objectives and dose specifications of the targets and organs at risk, and they were successfully delivered. The maximum cumulative acute GI/GU grade 1 and 2 toxicity rates were 19.0%/81.0% and 2.4%/7.1%, respectively. The subacute (>30 days) GI/GU grade 1 and 2 toxicity rates were 21.4%/64.3% and 2.4%/2.4%, respectively. No grade 3 toxicities were reported. QoL showed insignificant changes in urinary, bowel, sexual, and hormonal domain scores during the follow-up period. All patients had early post-MRgSBRT biochemical responses, while biochemical recurrence (PSA nadir + 2 ng/mL) occurred in one patient at month 18. Conclusions: To our knowledge, this is the first prospective study that showed the clinical outcomes of MRgSBRT with concomitant WPRT in HR-PC patients. The early results suggested favorable treatment-related toxicities and encouraging patient-reported QoLs, but long-term follow-up is needed to confirm our early results.

Evaluation of anhydrous processing and storage methods of the temperate bacteriophage ɸV10 for integration into foodborne pathogen detection methodologies.

Due to the nascency of bacteriophage-based pathogen detection technologies, several practical hurdles stand in the way between providing promising proof-of-concept data and development of robust detection platforms. One such hurdle, and the focus of this work, is the development of methods for transitioning laboratory stocks of bacteriophage into functional, consistent, and shelf-stable delivery methods in commercial detection kits. Research described here was undertaken to evaluate two methods for their ability to store the bacteriophage ɸV10 at ambient temperature without aqueous storage solutions while limiting loss of viability. ɸV10 is a temperate bacteriophage which solely infects the zero-tolerance food adulterant Escherichia coli O157:H7 and has been genetically modified to generate a detectable phenotype in host cells. In order to integrate this reporter bacteriophage into food-borne pathogen detection methodologies, two methods of processing phage suspensions for long-term, ambient storage were evaluated: printing solutions onto pieces of dissolvable paper and lyophilizing suspensions with sucrose. Applying phage to dissolvable paper yielded key attributes to consider when addressing phage viability, however, optimized methodology still resulted in an approximate five-log reduction in titer of viable phage. Lyophilization of ɸV10 with various concentrations of the cryoprotectant molecule, sucrose, yielded losses of approximately 0.3-log after 120 days of storage at 23°C. Liquid storage buffer samples with and without sucrose saw a reduction of viable phage of at least 3.9-log in the same period. Additionally, the ability for ɸV10 to form lysogens in an E. coli O157:H7 host was not negatively affected by lyophilization. Drying ɸV10 at ambient temperature drastically reduces the viability of the phage. However, lyophilizing ɸV10 in the presence of sucrose is an effective method for dehydration and storage of the phage in ambient environmental conditions for an extended time lending to commercial application and integration into foodborne pathogen detection methodologies.

1.5T Magnetic Resonance-Guided Stereotactic Body Radiotherapy for Localized Prostate Cancer: Preliminary Clinical Results of Clinician- and Patient-Reported Outcomes.

BACKGROUND: Magnetic resonance-guided stereotactic body radiotherapy (MRgSBRT) offers the potential for achieving better prostate cancer (PC) treatment outcomes. This study reports the preliminary clinical results of 1.5T MRgSBRT in localized PC, based on both clinician-reported outcome measurement (CROM) and patient-reported outcome measurement (PROM). METHODS: Fifty-one consecutive localized PC patients were prospectively enrolled with a median follow-up of 199 days. MRgSBRT was delivered in five fractions of 7.25-8 Gy with daily online adaptation. Clinician-reported gastrointestinal (GI) and genitourinary (GU) adverse events based on the Common Terminology Criteria for Adverse Events (CTCAE) Scale v. 5.0 were assessed. The Expanded Prostate Cancer Index Composite Questionnaire was collected at baseline, 1 month, and every 3 months thereafter. Serial prostate-specific antigen measurements were longitudinally recorded. RESULTS: The maximum cumulative clinician-reported grade ≥ 2 acute GU and GI toxicities were 11.8% (6/51) and 2.0% (1/51), respectively, while grade ≥ 2 subacute GU and GI toxicities were 2.3% (1/43) each. Patient-reported urinary, bowel, and hormonal domain summary scores were reduced at 1 month, then gradually returned to baseline levels, with the exception of the sexual domain. Domain-specific subscale scores showed similar longitudinal changes. All patients had early post-MRgSBRT biochemical responses. CONCLUSIONS: The finding of low toxicity supports the accumulation of clinical evidence for 1.5T MRgSBRT in localized PC.

Manipulating polymer composition to create low-cost, high-fidelity sensors for indoor CO2 monitoring.

Carbon dioxide (CO2) has been linked to many deleterious health effects, and it has also been used as a proxy for building occupancy measurements. These applications have created a need for low-cost and low-power CO2 sensors that can be seamlessly incorporated into existing buildings. We report a resonant mass sensor coated with a solution-processable polymer blend of poly(ethylene oxide) (PEO) and poly(ethyleneimine) (PEI) for the detection of CO2 across multiple use conditions. Controlling the polymer blend composition and nanostructure enabled better transport of the analyte gas into the sensing layer, which allowed for significantly enhanced CO2 sensing relative to the state of the art. Moreover, the hydrophilic nature of PEO resulted in water uptake, which provided for higher sensing sensitivity at elevated humidity conditions. Therefore, this key integration of materials and resonant sensor platform could be a potential solution in the future for CO2 monitoring in smart infrastructure.

A comparison of dose and set-up accuracy between flexed and extended neck positions in Helical Tomotherapy of nasopharyngeal carcinoma.

Nasopharyngeal carcinoma (NPC) patients treated with Helical Tomotherapy (HT) are commonly set up in an extended neck (EN) or a flexed neck (FN) position. This study investigated the dosimetric and set-up accuracy differences between these 2 set-up positions. Twenty NPC patients treated with HT from each set-up position were retrospectively recruited. HT plans were computed using the same target prescription and organs at risks (OARs) constraints for both set-up positions. The doses parameters of the target volumes and OARs were assessed. Daily megavoltage CT images were retrieved to obtain the set-up errors at 4th (C4) and 7th (C7) cervical levels. The mean values of these parameters were compared between the 2 set-up positions. The dose to NP target in FN group was more conformal than EN group, while the conformity of the neck targets in FN group were significantly lower. For the OARs, the temporal lobe, cerebellum, and hippocampus in FN group received significantly lower doses than the EN. However, the optic structures, brain stem, spinal cord, and parotid glands received higher doses in FN group. The systematic errors at C4 and C7 levels in FN group were larger in all translational directions except the ML direction at C7 level. With regard to radiotherapy of NPC patient using helical tomotherapy, FN position reduced doses to intracranial structures but increased doses to optic structures and other structures when compared with the EN position. In terms of set-up accuracy at the neck region, EN position was relatively better.