RESUMEN
Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.
RESUMEN
The 48 human nuclear receptors (NRs) form a superfamily of transcription factors that regulate major physiological and pathological processes. Emerging evidence suggests that NR crosstalk can fundamentally change our understanding of NR biology, but detailed molecular mechanisms of crosstalk are lacking. Here, we report the molecular basis of crosstalk between the pregnane X receptor (PXR) and constitutive androstane receptor (CAR), where they form a novel heterodimer, resulting in their mutual inhibition. PXR and CAR regulate drug metabolism and energy metabolism. Although they have been broadly perceived as functionally redundant, a growing number of reports suggests a mutual inhibitory relation, but their precise mode of coordinated action remains unknown. Using methods including RNA sequencing, small-angle X-ray scattering and crosslinking mass spectrometry we demonstrate that the mutual inhibition altered gene expression globally and is attributed to the novel PXR-CAR heterodimerization via the same interface used by each receptor to heterodimerize with its functional partner, retinoid X receptor (RXR). These findings establish an unexpected functional relation between PXR, CAR and RXR, change the perceived functional relation between PXR and CAR, open new perspectives on elucidating their role and designing approaches to regulate them, and highlight the importance to comprehensively investigate nuclear receptor crosstalk.
Asunto(s)
Receptor de Androstano Constitutivo/metabolismo , Receptor X de Pregnano/metabolismo , Dimerización , Regulación de la Expresión Génica , Humanos , Receptores Citoplasmáticos y Nucleares/metabolismoRESUMEN
In situ X-ray scattering measurements of CsPbX3 (X = Cl, Br, I) nanocrystal formation and halide exchange at NSLS-II beamlines were performed in an automated flow reactor. Total scattering measurements were performed at the 28-ID-2 (XPD) beamline and small-angle X-ray scattering at the 16-ID (LiX) beamline. Nanocrystal structural parameters of interest, including size, size distribution and atomic structure, were extracted from modeling the total scattering data. The results highlight the potential of these beamlines and the measurement protocols described in this study for studying dynamic processes of colloidal nanocrystal synthesis in solution with timescales on the order of seconds.
RESUMEN
This work describes the instrumentation and software for microbeam scattering and structural mapping at the Life Science X-ray Scattering (LiX) beamline at NSLS-II. Using a two-stage focusing scheme, an adjustable beam size between a few micrometres and a fraction of a millimetre is produced at the sample position. Scattering data at small and wide angles are collected simultaneously on multiple Pilatus detectors. A recent addition of an in-vacuum Pilatus 900k detector, with the detector modules arranged in a C-shaped configuration, has improved the azimuthal angle coverage in the wide-angle data. As an option, fluorescence data can be collected simultaneously. Fly scans have been implemented to minimize the time interval between scattering patterns and to avoid unnecessary radiation damage to the sample. For weakly scattering samples, an in-vacuum sample environment has been developed here to minimize background scattering. Data processing for these measurements is highly sample-specific. To establish a generalized data process workflow, first the data are reduced to reciprocal coordinates at the time of data collection. The users can then quantify features of their choosing from these intermediate data and construct structural maps. As examples, results from in-vacuum mapping of onion epidermal cell walls and 2D tomographic sectioning of an intact poplar stem are presented.
Asunto(s)
Disciplinas de las Ciencias Biológicas , Sincrotrones , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Rayos XRESUMEN
During the COVID-19 pandemic, synchrotron beamlines were forced to limit user access. Performing routine measurements became a challenge. At the Life Science X-ray Scattering (LiX) beamline, new instrumentation and mail-in protocols have been developed to remove the access barrier to solution scattering measurements. Our efforts took advantage of existing instrumentation and coincided with the larger effort at NSLS-II to support remote measurements. Given the limited staff-user interaction for mail-in measurements, additional software tools have been developed to ensure data quality, to automate the adjustments in data processing, as users would otherwise rely on the experience of the beamline staff, and produce a summary of the initial assessments of the data. This report describes the details of these developments.
Asunto(s)
Dispersión del Ángulo Pequeño , Soluciones/efectos de la radiación , Sincrotrones/instrumentación , Difracción de Rayos X/instrumentación , Tampones (Química) , COVID-19 , Recolección de Datos , Conjuntos de Datos como Asunto , Procesamiento Automatizado de Datos , Pandemias , Robótica , SARS-CoV-2 , Programas Informáticos , Manejo de Especímenes , AguaRESUMEN
This work reports the instrumentation and software implementation at the Life Science X-ray Scattering (LiX) beamline at NSLS-II in support of biomolecular solution scattering. For automated static measurements, samples are stored in PCR tubes and grouped in 18-position sample holders. Unattended operations are enabled using a six-axis robot that exchanges sample holders between a storage box and a sample handler, transporting samples from the PCR tubes to the X-ray beam for scattering measurements. The storage box has a capacity of 20 sample holders. At full capacity, the measurements on all samples last for â¼9â h. For in-line size-exclusion chromatography, the beamline-control software coordinates with a commercial high-performance liquid chromatography (HPLC) system to measure multiple samples in batch mode. The beamline can switch between static and HPLC measurements instantaneously. In all measurements, the scattering data span a wide q-range of typically 0.006-3.2â Å-1. Functionalities in the Python package py4xs have been developed to support automated data processing, including azimuthal averaging, merging data from multiple detectors, buffer scattering subtraction, data storage in HDF5 format and exporting the final data in a three-column text format that is acceptable by most data analysis tools. These functionalities have been integrated into graphical user interfaces that run in Jupyter notebooks, with hooks for external data analysis software.
Asunto(s)
Cromatografía Líquida de Alta Presión , Sincrotrones/instrumentación , Cromatografía en Gel , Diseño de Equipo , Robótica , Dispersión del Ángulo Pequeño , Programas Informáticos , Manejo de Especímenes , Rayos XRESUMEN
Structural characterization of nucleic acid nanoparticles (NANPs) in solution is critical for validation of correct assembly and for quantifying the size, shape, and flexibility of the construct. Small-angle X-ray scattering (SAXS) is a well-established method to obtain structural information of particles in solution. Here, we present a procedure for the preparation of NANPs for SAXS. This procedure outlines the steps for a successful SAXS experiment and the use of SAXS-driven molecular dynamics to generate an ensemble of structures that best explain the data observed in solution. We use an RNA NANP as an example, so the reader can prepare the sample for data collection, analyze the results, and perform SAXS-driven MD on similar NANPs.
Asunto(s)
Nanopartículas , Ácidos Nucleicos , Difracción de Rayos X , Dispersión del Ángulo Pequeño , Simulación de Dinámica MolecularRESUMEN
The myristoylpalmitoylphosphatidylcholine (MPPC) bilayer membrane shows a complicated temperature-pressure phase diagram. The large portion of the lamellar gel (L(ß)'), ripple gel (P(ß)'), and pressure-induced gel (L(ß)I) phases exist as metastable phases due to the extremely stable subgel (L(c)) phase. The stable L(c) phase enables us to examine the properties of the L(c) phase. The phases of the MPPC bilayers under atmospheric and high pressures were studied by small-angle neutron scattering (SANS) and fluorescence spectroscopy using a polarity-sensitive fluorescent probe Prodan. The SANS measurements clearly demonstrated the existence of the metastable L(ß)I phase with the smallest lamellar repeat distance. From a second-derivative analysis of the fluorescence data, the line shape for the L(c) phase under high pressure was characterized by a broad peak with a minimum of ca. 460 nm. The line shapes and the minimum intensity wavelength (λâ³(min)) values changed with pressure, indicating that the L(c) phase has highly pressure-sensible structure. The λâ³(min) values of the L(c) phase spectra were split into ca. 430 and 500 nm in the L(ß)I phase region, which corresponds to the formation of a interdigitated subgel L(c) (L(c)I) phase. Moreover, the phase transitions related to the L(c) phase were reversible transitions under high pressure. Taking into account the fluorescence behavior of Prodan for the L(c) phase, we concluded that the structure of the L(c) phase is highly probably a staggered structure, which can transform into the L(c)I phase easily.
Asunto(s)
Membrana Celular/química , Fluorometría , Membrana Dobles de Lípidos/química , Fosfatidilcolinas/química , Presión , 2-Naftilamina/análogos & derivados , 2-Naftilamina/química , Presión Atmosférica , Geles , Difracción de Neutrones , Dispersión del Ángulo PequeñoRESUMEN
During the past decade, cellulose nanofibrils (CNFs) have shown tremendous potential as a building block to fabricate new advanced materials that are both biocompatible and biodegradable. The excellent mechanical properties of the individual CNF can be transferred to macroscale fibers through careful control in hydrodynamic alignment and assembly processes. The optimization of such processes relies on the understanding of nanofibril dynamics during the process, which in turn requires in situ characterization. Here, we use a shear-free mixing experiment combined with scanning small-angle X-ray scattering (scanning-SAXS) to provide time-resolved nanoscale kinetics during the in situ assembly of dispersed cellulose nanofibrils (CNFs) upon mixing with a sodium chloride solution. The addition of monovalent ions led to the transition to a volume-spanning arrested (gel) state. The transition of CNFs is associated with segmental aggregation of the particles, leading to a connected network and reduced Brownian motion, whereby an aligned structure can be preserved. Furthermore, we find that the extensional flow seems to enhance the formation of these segmental aggregates, which in turn provides a comprehensible explanation for the superior material properties obtained in shear-free processes used for spinning filaments from CNFs. This observation clearly highlights the need for different assembly strategies depending on morphology and interactions of the dispersed nanoparticles, where this work can be used as a guide for improved nanomaterial processes.
RESUMEN
Time-resolved in situ characterization of well-defined mixing processes using small-angle X-ray scattering (SAXS) is usually challenging, especially if the process involves changes of material viscoelasticity. In specific, it can be difficult to create a continuous mixing experiment without shearing the material of interest; a desirable situation since shear flow both affects nanoscale structures and flow stability as well as resulting in unreliable time-resolved data. Here, we demonstrate a flow-focusing mixing device for in situ nanostructural characterization using scanning-SAXS. Given the interfacial tension and viscosity ratio between core and sheath fluids, the core material confined by sheath flows is completely detached from the walls and forms a zero-shear plug flow at the channel center, allowing for a trivial conversion of spatial coordinates to mixing times. With this technique, the time-resolved gel formation of dispersed cellulose nanocrystals (CNCs) was studied by mixing with a sodium chloride solution. It is observed how locally ordered regions, so called tactoids, are disrupted when the added monovalent ions affect the electrostatic interactions, which in turn leads to a loss of CNC alignment through enhanced rotary diffusion. The demonstrated flow-focusing scanning-SAXS technique can be used to unveil important kinetics during structural formation of nanocellulosic materials. However, the same technique is also applicable in many soft matter systems to provide new insights into the nanoscale dynamics during mixing.
Asunto(s)
Celulosa , Nanopartículas , Iones , Cinética , Dispersión del Ángulo Pequeño , Difracción de Rayos XRESUMEN
Myelin insulates neuronal axons and enables fast signal transmission, constituting a key component of brain development, aging and disease. Yet, myelin-specific imaging of macroscopic samples remains a challenge. Here, we exploit myelin's nanostructural periodicity, and use small-angle X-ray scattering tensor tomography (SAXS-TT) to simultaneously quantify myelin levels, nanostructural integrity and axon orientations in nervous tissue. Proof-of-principle is demonstrated in whole mouse brain, mouse spinal cord and human white and gray matter samples. Outcomes are validated by 2D/3D histology and compared to MRI measurements sensitive to myelin and axon orientations. Specificity to nanostructure is exemplified by concomitantly imaging different myelin types with distinct periodicities. Finally, we illustrate the method's sensitivity towards myelin-related diseases by quantifying myelin alterations in dysmyelinated mouse brain. This non-destructive, stain-free molecular imaging approach enables quantitative studies of myelination within and across samples during development, aging, disease and treatment, and is applicable to other ordered biomolecules or nanostructures.
Asunto(s)
Sistema Nervioso Central/metabolismo , Sistema Nervioso Central/ultraestructura , Vaina de Mielina/metabolismo , Vaina de Mielina/ultraestructura , Tomografía Computarizada por Rayos X/métodos , Animales , Axones/metabolismo , Axones/ultraestructura , Encéfalo/metabolismo , Encéfalo/ultraestructura , Sistema Nervioso Central/diagnóstico por imagen , Preescolar , Femenino , Humanos , Imagen por Resonancia Magnética/métodos , Masculino , Ratones , Ratones Endogámicos C57BL , Ratones Noqueados , Proteínas de la Mielina/metabolismo , Nanoestructuras/química , Nanoestructuras/ultraestructura , Neuroimagen/métodos , Prueba de Estudio Conceptual , Dispersión del Ángulo Pequeño , Médula Espinal/metabolismo , Médula Espinal/ultraestructuraRESUMEN
Nanostructured materials made through flow-assisted assembly of proteinaceous or polymeric nanosized fibrillar building blocks are promising contenders for a family of high-performance biocompatible materials in a wide variety of applications. Optimization of these processes relies on improving our knowledge of the physical mechanisms from nano- to macroscale and especially understanding the alignment of elongated nanoparticles in flows. Here, we study the full projected orientation distributions of cellulose nanocrystals (CNCs) and nanofibrils (CNFs) in confined flow using scanning microbeam SAXS. For CNCs, we further compare with a simulated system of dilute Brownian ellipsoids, which agrees well at dilute concentrations. However, increasing CNC concentration to a semidilute regime results in locally arranged domains called tactoids, which aid in aligning the CNC at low shear rates, but limit alignment at higher rates. Similarly, shear alignment of CNF at semidilute conditions is also limited owing to probable bundle or flock formation of the highly entangled nanofibrils. This work provides a quantitative comparison of full projected orientation distributions of elongated nanoparticles in confined flow and provides an important stepping stone towards predicting and controlling processes to create nanostructured materials on an industrial scale.
RESUMEN
Bio-based nanocellulose has been shown to possess impressive mechanical properties and simplicity for chemical modifications. The chemical properties are largely influenced by the surface area and functionality of the nanoscale materials. However, finding the typical cross-sections of nanocellulose, such as cellulose nanofibers (CNFs), has been a long-standing puzzle, where subtle changes in extraction methods seem to yield different shapes and dimensions. Here, we extracted CNFs from wood with two different oxidation methods and variations in degree of oxidation and high-pressure homogenization. The cross-sections of CNFs were characterized by small-angle X-ray scattering and wide-angle X-ray diffraction in dispersed and freeze-dried states, respectively, where the results were analyzed by assuming that the cross-sectional distribution was quantized with an 18-chain elementary microfibril, the building block of the cell wall. We find that the results agree well with a pseudosquare unit having a size of about 2.4 nm regardless of sample, while the aggregate level strongly depends on the extraction conditions. Furthermore, we find that aggregates have a preferred cohesion of phase boundaries parallel to the (110)-plane of the cellulose fibril, leading to a ribbon shape on average.
Asunto(s)
Microfibrillas , Madera , Celulosa/química , Estudios Transversales , Difracción de Rayos XRESUMEN
The phase transitions of dibehenoylphosphatidylcholine (C22PC) bilayer membrane were observed by differential scanning calorimetry under atmospheric pressure and light-transmittance measurements under high pressure. The constructed temperature-pressure phase diagram suggests that the gel phase at low temperatures is the interdigitated gel phase. To confirm the phase state, we performed small-angle neutron scattering and fluorescence measurements using a polarity-sensitive probe Prodan for the C22PC bilayer membrane under atmospheric pressure. The peaks obtained in both measurements clearly showed the characteristic patterns of the fully interdigitated gel phase. Taking into account of previous studies on the gel phase for long-chain PC bilayers under atmospheric pressure and our studies on the pressure-induced bilayer interdigitaion of diacyl-PCs, it turned out that the interdigitation of diacyl-PC bilayer membranes occurs when the carbon number of acyl chain reaches at least 22. The present study revealed that the interdigitation of PC bilayer membranes occurs not only by weakening the attractive force of polar head groups but also by strengthening the cohesive force of acyl chains. When dominating the force of acyl chains, the interdigitation can be induced even in a diacyl-PC bilayer membrane by only hydration under atmospheric pressure.
Asunto(s)
Membrana Dobles de Lípidos/química , Modelos Biológicos , Fosfatidilcolinas/química , Presión AtmosféricaRESUMEN
The interaction of the cationic surfactant cetyltrimethylammonium bromide (CTAB) with bovine serum albumin (BSA), a globular protein, has been studied by small-angle neutron scattering (SANS), fluorescence and circular dichroism (CD). SANS measurements show that at low [CTAB] the protein shows a native-like behavior. On the other hand, at high [CTAB], surfactant molecules result in the formation of a fractal structure representing a 'necklace model' of micelle-like clusters randomly distributed along the polypeptide chain. The overall size of the complex increases and the fractal dimension decreases on increasing the surfactant concentration. The size of the micelle-like clusters does not show any considerable change while the number of such clusters and their aggregation number increases with increasing [CTAB]. Some extrapolatory experiments were performed with tetradecyltrimethylammonium bromide (TTAB) and the surfactant was found to behave similarly leading to an increase in the size of protein along the semi-major axis at low concentrations and formation of a fractal structure at high concentrations. The fluorescence studies undertaken were found to be consistent with the SANS measurements. Native-like behavior of the protein mixed with low concentration of the surfactant was also concluded from the circular dichroism (CD) spectra where the spectra in presence of high [CTAB] could not be monitored because of high dynode voltage.