On the atomistic origin of the polymorphism and the dielectric physical properties of beryllium oxide.

Polymorphic beryllium oxide has been theoretically investigated from first principles as regards orbital occupancies, chemical bonding, polarization, as well as dielectric properties. By means of Crystal-Orbital Bond Index (COBI) analysis, the important role of the 2p orbitals on beryllium has been elucidated, in particular in terms of the correlation between polarization and beryllium-atom displacement, including the impact of the latter on the covalency of the BeO bond. In addition, several structural possibilities for a Bex Mg1-x O solid solution have been investigated for a Be content between 6% and 22%; for those, dynamically stable structures have been found, displaying large polarization values, more covalent BeO bonds, and a tendency for tetrahedral Be coordination. The dynamically unstable structures, however, resemble rock-salt BeO in their local structural properties around the Be atom. High dielectric constants and band gaps indicating insulating behavior have been found for those.

Controlling Gas Generation of Li-Ion Battery through Divinyl Sulfone Electrolyte Additive.

The focus of mainstream lithium-ion battery (LIB) research is on increasing the battery's capacity and performance; however, more effort should be invested in LIB safety for widespread use. One aspect of major concern for LIB cells is the gas generation phenomenon. Following conventional battery engineering practices with electrolyte additives, we examined the potential usage of electrolyte additives to address this specific issue and found a feasible candidate in divinyl sulfone (DVSF). We manufactured four identical battery cells and employed an electrolyte mixture with four different DVSF concentrations (0%, 0.5%, 1.0%, and 2.0%). By measuring the generated gas volume from each battery cell, we demonstrated the potential of DVSF additives as an effective approach for reducing the gas generation in LIB cells. We found that a DVSF concentration of only 1% was necessary to reduce the gas generation by approximately 50% while simultaneously experiencing a negligible impact on the cycle life. To better understand this effect on a molecular level, we examined possible electrochemical reactions through ab initio molecular dynamics (AIMD) based on the density functional theory (DFT). From the electrolyte mixture's exposure to either an electrochemically reductive or an oxidative environment, we determined the reaction pathways for the generation of CO2 gas and the mechanism by which DVSF additives effectively blocked the gas's generation. The key reaction was merging DVSF with cyclic carbonates, such as FEC. Therefore, we concluded that DVSF additives could offer a relatively simplistic and effective approach for controlling the gas generation in lithium-ion batteries.

Additional Lithium Storage on Dynamic Electrode Surface by Charge Redistribution in Inactive Ru Metal.

Beyond a traditional view that metal nanoparticles formed upon electrochemical reaction are inactive against lithium, recently their electrochemical participations are manifested and elucidated as catalytic and interfacial effects. Here, ruthenium metal composed of ≈5 nm nanoparticles is prepared and the pure ruthenium as a lithium-ion battery anode for complete understanding on anomalous lithium storage reaction mechanism is designed. In particular, the pure metal electrode is intended for eliminating the electrochemical reaction-derived Li2 O phase accompanied by catalytic Li2 O decomposition and the interfacial lithium storage at Ru/Li2 O phase boundary, and thereby focusing on the ruthenium itself in exploring its electrochemical reactivity. Intriguingly, unusual lithium storage not involving redox reactions with electron transfer but leading to lattice expansion is identified in the ruthenium electrode. Size-dependent charge redistribution at surface enables additional lithium adsorption to occur on the inactive but more environmentally sensitive nanoparticles, providing innovative insight into dynamic electrode environments in rechargeable lithium chemistry.

l-Tryptophan: Antioxidant as a Film-Forming Additive for a High-Voltage Cathode.

l-tryptophan (TrP) was investigated as a functional film-forming additive on a lithium-rich layered oxide cathode because it has a much lower oxidation potential than other common carbonate-based electrolytes. Owing to its prior oxidation to a base electrolyte, an artificial cathode-electrolyte interphase (CEI) was formed on the cathode surface, which could be confirmed via X-ray photoelectron spectroscopy and scanning electron microscopy and verified through density functional theory calculations. The functional film formed on the cathode surface suppressed the side reactions between the cathode and electrolyte during cell cycling. As a result, the film prevented CEI thickening and performance deterioration. The optimum weight of TrP was determined to be 0.4 wt % for obtaining the best performance.

Reductive reactions via excess Li in mixture electrolytes of Li ion batteries: an ab initio molecular dynamics study.

The electro-reduction of battery electrolytes plays a critical role in the formation of solid-electrolyte interphase (SEI) layers on the surfaces of negative electrodes. These layers have a significant influence on the performance of rechargeable battery cells. Using ab initio molecular dynamics, we demonstrate the electro-reduction of mixture electrolytes computationally by adding a certain number of excess Li+ first to form the solvation structure and the same number of electrons later for reductive reactions. Our method enables direct observations of the ring opening of one cyclic carbonate followed by merging with another solvent molecule as well as gas generation. When we examined FEC- and EC-based electrolytes, we were able to observe the differences in terms of reaction products. In particular, the two gaseous products that are generated the most are in accordance with recent in situ gas measurements in the literature. The different reaction products of each electrolyte also match well with the SEI constituents reported experimentally. By tracing reaction pathways, we found that Li+ ions facilitate many otherwise difficult electrochemical reactions, presumably by lowering energy barriers. We also found that the excess Li+ forms cationic clusters of Li2PF6+, which enable the reductive decomposition of salt anions and which do not occur easily simply by increasing the electronic occupation. Based on the reaction products of FEC-based electrolytes, here we propose a possible mechanism of polymerization through aldehyde intermediates that are known to bond with surrounding radical anions.

Switchable Chemical-Bond Reorganization for the Stable Charge Trapping in Amorphous Silicon Nitride.

Despite the widespread use of charge-trap flash (CTF) memory, the atomistic mechanism behind the exceptionally stable charge storage at the localized trap sites is still controversial. Herein, by combining first-principles calculations and orbital interaction analysis, a charge-dependent switchable chemical-bond reorganization is elucidated as the underpinning chemistry in the working mechanism of CTF. Especially, positively charged fourfold-coordinated nitrogen (dubbed N+ center), unappreciated until now, is the decisive component of the entire process; once an electron occupies this site, the N+ center disappears by breaking one N─Si bond, simultaneously forming a new Si─Si bond with a nearby Si atom which, in turn, creates fivefold coordinated Si. As a result, the electron is stored in a multi-center orbital belonging to multiple atoms including the newly formed Si─Si bond. It is also observed that hole trapping accompanies the creation of an N+ center by forming a new N─Si bond, which represents the reverse process. To further support and validate this model by means of core-level calculations, it is also shown that an N+ center's 1s core level is 1.0-2.5 eV deeper in energy than those of the threefold coordinated N atoms, in harmony with experimental X-ray photoelectron spectroscopy data.

Hydrogen-bond dynamics of water at the interface with InP/GaP(001) and the implications for photoelectrochemistry.

We investigate the structure, topology, and dynamics of liquid water at the interface with natively hydroxylated (001) surfaces of InP and GaP photoelectrodes. Using ab initio molecular dynamics simulations, we show that contact with the semiconductor surface enhances the water hydrogen-bond strength at the interface. This leads to the formation of an ice-like structure, within which dynamically driven water dissociation and local proton hopping are amplified. Nevertheless, the structurally similar and isovalent InP and GaP surfaces generate qualitatively different interfacial water dynamics. This can be traced to slightly more covalent-like character in the binding of surface adsorbates to GaP, which results in a more rigid hydrogen-bond network that limits the explored topological phase space. As a consequence, local proton hopping can give rise to long-range surface proton transport on InP, whereas the process is kinetically limited on GaP. This allows for spatial separation of individual stages of hydrogen-evolving, multistep reactions on InP(001). Possible implications for the mechanisms of cathodic water splitting and photocorrosion on the two surfaces are considered in light of available experimental evidence.

Enhanced dihydrogen adsorption in symmetry-lowered metal-porphyrin-containing frameworks.

Porphyrin is a very important component of natural and artificial catalysis and oxygen delivery in blood. Here, we report that, based on first-principles density-functional calculations, a hydrogen molecule can be adsorbed non-dissociatively onto Ti-, V-, and Fe-porphyrins, similar to oxygen adsorption in heme-containing proteins, with a significant energy gain, greater than 0.3 eV per H(2). The dihydrogen-heme complex will be non-magnetic, as is oxyhemoglobin. In contrast to the backward electron donation of Fe(III)-O(2)(-) in oxyhemoglobin, the dihydrogen binding originates from electron donation from H(2) to the Fe(II). We have identified that the local symmetry of the transition metal center of porphyrins uniquely determines the binding strength, and, thus, one can even manipulate the strength by intentionally and systematically breaking symmetry.

Exceptional Lithium Storage in a Co(OH)2 Anode: Hydride Formation.

Current lithium ion battery technology is tied in with conventional reaction mechanisms such as insertion, conversion, and alloying reactions even though most future applications like EVs demand much higher energy densities than current ones. Exploring the exceptional reaction mechanism and related electrode materials can be critical for pushing current battery technology to a next level. Here, we introduce an exceptional reaction with a Co(OH)2 material which exhibits an initial charge capacity of 1112 mAh g-1, about twice its theoretical value based on known conventional conversion reaction, and retains its first cycle capacity after 30 cycles. The combined results of synchrotron X-ray diffraction and X-ray absorption spectroscopy indicate that nanosized Co metal particles and LiOH are generated by conversion reaction at high voltages, and Co xH y, Li2O, and LiH are subsequently formed by hydride reaction between Co metal, LiOH, and other lithium species at low voltages, resulting in a anomalously high capacity beyond the theoretical capacity of Co(OH)2. This is further corroborated by AIMD simulations, localized STEM, and XPS. These findings will provide not only further understanding of exceptional lithium storage of recent nanostructured materials but also valuable guidance to develop advanced electrode materials with high energy density for next-generation batteries.

Nanoscale Chemical and Electrical Stabilities of Graphene-covered Silver Nanowire Networks for Transparent Conducting Electrodes.

The hybrid structure of Ag nanowires (AgNWs) covered with graphene (Gr) shows synergetic effects on the performance of transparent conducting electrodes (TCEs). However, these effects have been mainly observed via large-scale characterization, and precise analysis at the nanoscale level remains inadequate. Here, we present the nanoscale verification and visualization of the improved chemical and electrical stabilities of Gr-covered AgNW networks using conductive atomic force microscopy (C-AFM), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS) combined with the gas cluster ion beam (GCIB) sputtering technique. Specifically by transferring island Gr on top of the AgNW network, we were able to create samples in which both covered and uncovered AgNWs are simultaneously accessible to various surface-characterization techniques. Furthermore, our ab initio molecular dynamics (AIMD) simulation elucidated the specific mechanistic pathway and a strong propensity for AgNW sulfidation, even in the presence of ambient oxidant gases.

Combinatorial search for optimal hydrogen-storage nanomaterials based on polymers.

We perform an extensive combinatorial search for optimal nanostructured hydrogen-storage materials among various metal-decorated polymers using first-principles density-functional calculations. We take into account the zero-point vibration as well as the pressure- and temperature-dependent adsorption-desorption probability of hydrogen molecules. An optimal material we identify is Ti-decorated cis-polyacetylene with reversibly usable gravimetric and volumetric density of 7.6 wt % and 63 kg/m(3), respectively, near ambient conditions. We also propose "thermodynamically usable hydrogen capacity" as a criterion for comparing different storage materials.