Bifurcated Polymorphic Transition and Thermochromic Fluorescence of a Molecular Crystal Involving Three-Dimensional Supramolecular Gear Rotation.

The ability of molecules to move and rearrange in the solid state accounts for the polymorphic transition and stimuli-responsive properties of molecular crystals. However, how the crystal structure determines the molecular motion ability remains poorly understood. Here, we report that a three-dimensional (3D) supramolecular gear network in the green-emissive polymorph 1G of a dialkylamino-substituted anthracene-pentiptycene π-system (1) enables an unusual bifurcated polymorphic transition into a yellow-emissive polymorph (1Y) and a new green-emissive polymorph (1G*) via 3D correlated supramolecular rotation. The 90° forward correlated rotation causes the molecular conformation between the octyl and the anthracene units to change from syn to anti, the ladder-like supramolecular columns to constrict, and the gear network to disengage. This cooperative molecular motion is marked by the gradual formation of an intermediate state (1I) across the entire crystal from 170 to 230 °C, which then undergoes bifurcated (forward or backward rotation) and irreversible transitions to form polymorphs 1Y and 1G* at 230-235 °C. Notably, 1G* is similar to 1G but lacks gear engagement, preventing its transformation into 1Y. Nevertheless, 1G can be restored by grinding 1Y or 1G* or fuming with dichloromethane (DCM) vapor. This work illustrates the correlation between the crystal structure and solid-state molecular motion behavior and demonstrates how a 3D molecular gear system efficiently transmits thermal energy to drive the polymorphic transition and induce fluorochromism through significant conformational and packing changes.

Missing Piece in Colloidal Stability─Morphological Factor of Hydrophobic Nanoparticles.

Hydrophobic nanoparticles (NPs) in water were considered unstable because they lack the repulsive electrostatic interaction and steric effect to prevent aggregation. In this study, porous hydrophobic NPs of two star-shaped giant molecules, POSS-(R)8, were found to be stable in water and able to retain their kinetic stability in a wide range of temperatures, pH values, and ionic strengths. Unlike the solid hydrophobic NPs that aggregate even with the negative zeta potential (ζ) induced by surface-structured hydrogen-bonded (SHB) water, the porous morphology of POSS-(R)8 NPs reduces the entropically driven hydrophobic effect to prevent aggregation. With the porous morphology, the hydrophobic NPs are stable without the hydrophilic or charged surface functional groups and demonstrate good encapsulation capability. The morphological factor of colloids is thus one of the missing pieces in the theory of colloidal stability that extends our understanding of colloidal science.

Dual-Axis Alignment of Bulk Artificial Water Channels by Directional Water-Induced Self-Assembly.

Approaching single-crystal-like morphology has always been important in driving materials toward their optimal properties. With only orientational order, liquid crystal (LC) materials require dual-axis orientational control to optimize their structural order in the bulk phase. However, current external guiding fields such as electrical, magnetic, and mechanical guiding fields are less effective in aligning amphiphilic LCs. In this study, water is developed as an excellent structural stabilizer and orientation-directing agent of an amphiphilic discotic molecule (AD) in the water-induced self-assembly (WISA) process. Thermal analysis and structural characterization results show that water increases the stability and domain sizes of the hexagonal columnar (Colh) phase of the AD by co-assembling with the ADs to form bulk artificial water channels (AWCs). Moreover, through control over the nucleation conditions (degree of supercooling and location of nucleation), dual-axis alignment in both the planar and vertical growth of the AWCs is achieved by applying water as the guiding field in the directional WISA. With precise control over the hierarchical structures, the bulk AWC array of the AD delivers excellent salt rejection properties and water permeability. Considering that all the amphiphilic LCs have hydrophilic segments, these new roles of water in the WISA process could launch the further development of functional amphiphilic LCs by providing a dynamic interaction and a readily available guiding field.

Recognizing the Importance of Fast Nonisothermal Crystallization for High-Performance Two-Dimensional Dion-Jacobson Perovskite Solar Cells with High Fill Factors: A Comprehensive Mechanistic Study.

Two-dimensional (2D) Dion-Jacobson (DJ) perovskite solar cells (PSCs), despite their advantage in versatility of n-layer variation, are subject to poor photovoltaic efficiency, particularly in the fill factor (FF), compared to their three-dimensional counterparts. To enhance the performance of DJ PSCs, the process of growing crystals and hence the corresponding morphology of DJ perovskites are of prime importance. Herein, we report the fast nonisothermal (NIT) crystallization protocol that is previously unrecognized for 2D perovskites to significantly improve the morphology, orientation, and charge transport of the DJ perovskite films. Comprehensive mechanistic studies reveal that the NIT effect leads to the secondary crystallization stage, forming network-like channels that play a vital role in the FF's leap-forward improvement and hence the DJ PSC's performance. As a whole, the NIT crystallized PSCs demonstrate a high power conversion efficiency and an FF of up to 19.87 and 86.16%, respectively. This research thus provides new perspectives to achieve highly efficient DJ PSCs.

Synchrotron X-Ray Analysis and Morphology Evidence for Stereo-Assemblies of Periodic Aggregates in Poly(3-hydroxybutyrate) with Unusual Photonic Iridescence.

3D morphology of poly(3-hydroxybutyrate) (PHB), crystallized in the presence of diluents of poly(1,3-trimethylene adipate) and poly(ethylene oxide), is probed using a novel approach coupled with selective etching. For interpreting the mechanisms of crystal periodic aggregation, various microscopic techniques and synchrotron microbeam X-ray analysis are used to observe the top surface in connection with the 3D crystal assemblies. Periodic grating architectures, with the cross-bar pitch exactly matching with the optical band spacing, are proved in banded PHB. The crystals under the ridge branch out to spawn finer crystals orienting/bending horizontally underneath the valley band, repeating till species drainage or impingement. The grating structure in the banded PHB resembles many nature's iridescence crystals and is further proved by photonic reflection results as a critical breakthrough novel finding.

Facet-Dependent Surface Trap States and Carrier Lifetimes of Silicon.

The facet-dependent electrical conductivity properties of silicon wafers result from significant band structure differences and variations in bond length, bond geometry, and frontier orbital electron distribution between the metal-like and semiconducting planes of silicon. To further understand the emergence of conductivity facet effects, electrochemical impedance measurements were conducted on intrinsic Si {100}, {110}, and {111} wafers. The attempt-to-escape frequency, obtained from temperature-dependent capacitance versus applied frequency curves, and other parameters derived from typical semiconductor property measurements were used to construct a diagram of the trap energy level (Et) and the amount of trap states Nt(Et). The trap states are located 0.61-0.72 eV above the silicon conduction band. Compared to {100} and {110} wafers, Si {111} wafer shows far less densities of trap states over the range of -0.2 to 2 V. Since these trap states inhibit direct electron excitation to the conduction band, the {111} wafer having much fewer trap states presents the best electrical conductivity property. Impedance data also provide facet-specific carrier lifetimes. The {111} surface gives consistently the lowest carrier lifetime, which reflects its high electrical conductivity. Lastly, ultraviolet photoelectron spectra and diffuse reflectance spectra were taken to obtain Schottky barriers between Ag and contacting Si wafers. The most conductive {111} surface presenting the largest Schottky barrier means the degrees of surface band bending used to explain facet-dependent electrical behaviors cannot be reliably attained this way.

In-Situ Synchrotron SAXS and WAXS Investigation on the Deformation of Single and Coaxial Electrospun P(VDF-TrFE)-Based Nanofibers.

Coaxial core/shell electrospun nanofibers consisting of ferroelectric P(VDF-TrFE) and relaxor ferroelectric P(VDF-TrFE-CTFE) are tailor-made with hierarchical structures to modulate their mechanical properties with respect to their constituents. Compared with two single and the other coaxial membranes prepared in the research, the core/shell-TrFE/CTFE membrane shows a more prominent mechanical anisotropy between revolving direction (RD) and cross direction (CD) associated with improved resistance to tensile stress for the crystallite phase stability and good strength-ductility balance. This is due to the better degree of core/shell-TrFE-CTFE nanofiber alignment and the crystalline/amorphous ratio. The coupling between terpolymer P(VDF-TrFE-CTFE) and copolymer P(VDF-TrFE) is responsible for phase stabilization, comparing the core/shell-TrFE/CTFE with the pristine terpolymer. Moreover, an impressive collective deformation mechanism of a two-length scale in the core/shell composite structure is found. We apply in-situ synchrotron X-ray to resolve the two-length scale simultaneously by using the small-angle X-ray scattering to characterize the nanofibers and the wide-angle X-ray diffraction to identify the phase transformations. Our findings may serve as guidelines for the fabrication of the electrospun nanofibers used as membranes-based electroactive polymers.

Superior Stability and Emission Quantum Yield (23% ± 3%) of Single-Layer 2D Tin Perovskite TEA2 SnI4 via Thiocyanate Passivation.

Tin-based perovskite, which exhibits narrower bandgap and comparable photophysical properties to its lead analogs, is one of the most forward-looking lead-free semiconductor materials. However, the poor oxidative stability of tin perovskite hinders the development toward practical application. In this work, the effect of pseudohalide anions on the stability and emission properties of single-layer 2D tin perovskite nanoplates with chemical formula TEA2 SnI4 (TEA = 2-thiophene-ethylammonium) is reported. The results reveal that ammonium thiocyanate (NH4 SCN) is the most effective additive in enhancing the stability and photoluminescence quantum yield of 2D TEA2 SnI4 (23 ± 3%). X-Ray photoelectron spectroscopic investigations on the thiocyanate passivated TEA2 SnI4 nanoplate show less than a 1% increase of Sn4+ signal upon 30 min exposure to air under ambient conditions (298 K, humidity ≈70%). Furthermore, no noticeable decrease in emission intensity of the nanoplate is observed after 20 h in air. The SCN- passivation during the growth stage of TEA2 SnI4 is proposed to play a crucial role in preventing the oxidation of Sn2+ and hence boosts both stability and photoluminescence yield of tin perovskite nanoplates.

Supramolecular Polymer Network-Mediated Self-Assembly of Semicrystalline Polymers with Excellent Crystalline Performance.

A novel application of supramolecular interactions within semicrystalline polymers, capable of self-assembling into supramolecular polymer networks via self-complementary multiple hydrogen-bonded complexes, is demonstrated for efficient construction of highly controlled self-organizing hierarchical structures to offer a direct, efficient nucleation pathway resulting in superior crystallization performance. Herein, a novel functionalized poly(ε-caprolactone) containing self-complementary sextuple hydrogen-bonded uracil-diamidopyridine (U-DPy) moieties is successfully developed and demonstrated excellent thermal and viscoelastic properties as well as high dynamic structural stability in the bulk state due to physical cross-linking created by reversible sextuple hydrogen bonding between U-DPy units. Due to the ability to vary the extent of the reversible network by tuning the U-DPy content, this newly developed material can be readily adjusted to obtain the desired crystalline products with specific characteristics. Importantly, incorporating only 0.1% U-DPy resulted in a polymer with a high crystallization rate constant, short crystallization half-time, and much more rapid crystallization kinetics than pristine PCL, indicating a low content of U-DPy moieties provides highly efficient nucleation sites that manipulate the nucleation and growth processes of polymer crystals to promote crystallization and chain alignment in bulk. This new system is suggested as a potential new route to substantially improve the performance of polymer crystallization.

Controlled Handedness of Twisted Lamellae in Banded Spherulites of Isotactic Poly(2-vinylpyridine) as Induced by Chiral Dopants.

Herein, we suggest a unique approach to control the handedness of twisted lamellae in banded spherulites of a stereoregular polymer, isotactic poly(2-vinylpyridine) (iP2VP). When (R)- or (S)-hexahydromandelic acid (HMA), which can associate with iP2VP, was introduced as a chiral dopant, mirror-image CD spectra in the complex systems showed induced circular dichroism (ICD) of the iP2VP by chiral HMA. Banded spherulites resulting from lamellar twisting due to the imbalanced stresses at the opposite folding surfaces could be formed by crystallization of the iP2VP/HMA complexes, which had a crystalline structure similar to that of neat iP2VP. A preferential sense of the twisted crystalline lamellae was found in the iP2VP/HMA complex, thus suggesting homochiral evolution from conformational to hierarchical chirality.

Luminescence enhancement of pyrene/dispersant nanoarrays driven by the nanoscale spatial effect on mixing.

This work presents a simple method to generate ordered chromophore/dispersant nanoarrays through a pore-filling process for a nanoporous polymer template to enhance chromophore luminescence. Fluorescence results combining with the morphological evolution examined by scanning probe microscopy reveal that the enhanced luminescence intensity reaches the maximum intensity as the nanopores of the template are completely filled by the chromophore/dispersant mixture. The variation is attributed to nanoscale spatial effect on the enhanced mixing efficiency of chromophore and dispersant, that is, the alleviation of self-quenching problem, as evidenced by the results of attenuated total reflection Fourier transform IR spectroscopy combining with grazing incident wide-angle X-ray diffraction. The enhanced luminescence of the chromophore/dispersant nanoarrays driven by the nanoscale spatial effect is highly promising for use in designing luminescent nanodevices.

Bioinspired assembly of functional block-copolymer nanotemplates.

A new concept on bioinspired assembly of functional diblock copolymers, capable of forming different microstructures through nucleobase-induced supramolecular interactions, has been explored. In this paper, a new series of uracil-functionalized poly(ε-caprolactone)-b-(4-vinylbenzyl uracil)s (PCL-b-PVBU) have been prepared which exhibit a high self-complementary ability in solution and solid states owing to the formation of uracil­uracil pairs by induced hierarchical self-assembly. The ordered morphologies of PCL-b-PVBU diblock copolymers changed from a lamellar, hexagonally packed cylinder to a sphere with respect to the content of the hydrogen bond segment. Moreover, we further show that the PCL segment could be easily extracted by enzymatic degradation, leading to a cylinder porous structure of long-range order, which gives a facile method for the fabrication of uracil-functionalized nanotemplates. In addition, bio-complementary PCL-b-PVBU/9-hexadecyladenine (AC16) hierarchical supramolecular complexes formed through strong cooperative hydrogen bonding between the uracil group of PVBU and the adenine group of A-C16. When the mixing ratios of PCL-b-PVBU/AC16 differ from the stoichiometric ratio, these complexes self-assemble into well-ordered lamellar and hexagonal structures; the changing morphology at different AC16 loadings reveals that the molecular structures of the PCL-b-PVBU/AC16 complexes are readily tailored.

Self-Healing of Recombinant Spider Silk Gel and Coating.

Self-healing properties, originating from the natural healing process, are highly desirable for the fitness-enhancing functionality of biomimetic materials. Herein, we fabricated the biomimetic recombinant spider silk by genetic engineering, in which Escherichia coli (E. coli) was employed as a heterologous expression host. The self-assembled recombinant spider silk hydrogel was obtained through the dialysis process (purity > 85%). The recombinant spider silk hydrogel with a storage modulus of ~250 Pa demonstrated autonomous self-healing and high strain-sensitive properties (critical strain ~50%) at 25 °C. The in situ small-angle X-ray scattering (in situ SAXS) analyses revealed that the self-healing mechanism was associated with the stick-slip behavior of the ß-sheet nanocrystals (each of ~2-4 nm) based on the slope variation (i.e., ~-0.4 at 100%/200% strains, and ~-0.9 at 1% strain) of SAXS curves in the high q-range. The self-healing phenomenon may occur through the rupture and reformation of the reversible hydrogen bonding within the ß-sheet nanocrystals. Furthermore, the recombinant spider silk as a dry coating material demonstrated self-healing under humidity as well as cell affinity. The electrical conductivity of the dry silk coating was ~0.4 mS/m. Neural stem cells (NSCs) proliferated on the coated surface and showed a 2.3-fold number expansion after 3 days of culture. The biomimetic self-healing recombinant spider silk gel and thinly coated surface may have good potential in biomedical applications.

Intrinsically Stretchable Conductive Self-Healable Organogels for Strain, Pressure, Temperature, and Humidity Sensing.

Intrinsically stretchable conductive self-healable organogels containing poly(lipoic acid), Al3+ ion, tannic acid, and reduced graphene oxide are produced in this report. These noncovalent networks interlocked through physical (hydrogen and coordination) bonds offered high stretchabilities and mechanical strengths as well as fast self-healing behaviors. The optimum organogel-based sensor showed outstanding pressure sensitivities (0.94 kPa-1 up to 10 and 1.07 kPa-1 for 10-50 kPa) and high strain responses (corresponding gauge factors of 1.1 and 0.4 for 0-50 and 50-100% stretching ratios). This organogel also revealed high stabilities at ambient atmosphere due to the presence of binary solvents of dimethyl sulfoxide and glycerol. Additionally, this stretchable thermistor displayed remarkable two-stage sensitivities of -2.6 and -0.4%/°C ranging over 0-30 and 30-80 °C, respectively. Besides, the signal variations of water droplet addition and removal with different temperatures were recorded by the organogel sensor to elucidate the practical applicabilities as a temperature sensor. Moreover, the organogel was utilized to demonstrate humidity sensing, where individual sensitivities of 0.89 and 0.55 were obtained in the respective relative humidity ranges of 10-30 and 40-90%. In the meanwhile, the sensor device illustrated distinct humidity signals during respiration monitoring of nose and mouth breathing detection. Accordingly, these quad-functional sensor applications in strain, pressure, temperature, and humidity detection enable this gel to act as a promising material for future multifunctional flexible electronics.

A CO2-Responsive Imidazole-Functionalized Fluorescent Material Mediates Cancer Chemotherapy.

We present a breakthrough in the synthesis and development of functional gas-responsive materials as highly potent anticancer agents suitable for applications in cancer treatment. Herein, we successfully synthesised a stimuli-responsive multifunctional material (I-R6G) consisting of a carbon dioxide (CO2)-sensitive imidazole moiety and spirolactam-containing conjugated rhodamine 6G (R6G) molecule. The resulting I-R6G is highly hydrophobic and non- or weakly fluorescent. Simple CO2 bubbling treatment induces hydrophobic I-R6G to completely dissolve in water and subsequently form self-assembled nanoparticles, which exhibit unique optical absorption and fluorescence behaviours in water and extremely low haemolytic ability against sheep red blood cells. Reversibility testing indicated that I-R6G undergoes reversible CO2/nitrogen (N2)-dependent stimulation in water, as its structural and physical properties can be reversibly and stably switched by alternating cycles of CO2 and N2 bubbling. Importantly, in vitro cellular assays clearly demonstrated that the CO2-protonated imidazole moiety promotes rapid internalisation of CO2-treated I-R6G into cancer cells, which subsequently induces massive levels of necrotic cell death. In contrast, CO2-treated I-R6G was not internalised and did not affect the viability of normal cells. Therefore, this newly created system may provide an innovative and efficient route to remarkably improve the selectivity, safety and efficacy of cancer treatment.

Triggering the Vapochromic Behavior in C60 via the Supramolecular Wrapping of st-PMMA.

Understanding the physicochemical modulation of functional molecules is the primary step in exploring novel stimuli-responsive materials, and preventing the π-π stacking configuration of π-conjugated molecules has been an effective strategy of vapochromic material development, such as of nanoporous frameworks. Nevertheless, the more complicated synthetic strategy should in fact be applied in many circumstances. In this study, we explore a facile supramolecular strategy where the commodity plastic, syndiotactic-poly(methyl methacrylate) (st-PMMA), is utilized to wrap C60 to form the inclusion complex. The structural characterization revealed that C60s in the st-PMMA supramolecular helix had a lower coordination number (CN = 2) compared to the face-centered-cubic packing of pure C60s (CN = 12). Since the st-PMMA/C60 helical complex has structural flexibility, the π-π stacking structure of C60 was further interrupted by the intercalation of toluene vapors, and the complete isolation of C60 in the complex induced the desired vapochromic behavior. Furthermore, the aromatic interaction between C60 and aromatic solvent vapors enabled the st-PMMA/C60 inclusion complex to selectively encapsulate chlorobenzene, toluene, etc., and induce the color change. The st-PMMA/C60 inclusion complex exhibited a transparent film of sufficient structural integrity such that it can still induce a reversible color change after several cycles. As a result, a new strategy has been discovered for the development of novel vapochromic materials via host-guest chemistry.

Phenoxy Group-Containing Asymmetric Non-Fullerene Acceptors Achieved Higher VOC over 1.0 V through Alkoxy Side-Chain Engineering for Organic Solar Cells.

Alkoxy side chain engineering on the ß-position of the thienothiophene units of Y6 derivatives plays a vital role in improving photovoltaic performances with simultaneously increasing open-circuit voltage (Voc) and fill factor (FF). In this work, we prepared a series of asymmetric non-fullerene acceptors (NFAs) by introducing alkoxy side chains and phenoxy groups on the state-of-the-art Y6-derivative BTP-BO-4F. For the comparison, 2O-BO-4F with a symmetric alkoxy side chain on the outer thiophene units and BTP-PBO-4F with an asymmetric N-attached phenoxy alkyl chain on the pyrrole ring are synthesized from BTP-BO-4F. Thereafter, we construct four asymmetric NFAs by introducing different lengths of linear/branched alkoxy chains on the ß-position of the thienothiophene units of BTP-PBO-4F. The resulting NFAs, named L10-PBO, L12-PBO, B12-PBO, and B16-PBO (L = linear and B = branched alkoxy side chains), are collectively called OR-PBO-series. Unexpectedly, all OR-PBO NFAs exhibit strong edge-on molecular packing and weaker π-π interactions in the film state, which diminish the charge transfer in organic solar cell (OSC) devices. As a consequence, the optimal devices of OR-PBO-based binary blends show poor photovoltaic performances [power conversion efficiency (PCE) = 6.52-9.62%] in comparison with 2O-BO-4F (PCE = 12.42%) and BTP-PBO-4F (PCE = 15.30%) reference blends. Nevertheless, the OR-PBO-based binary devices show a higher Voc and smaller Vloss. Especially, B12-PBO- and B16-PBO-based devices achieve Voc over 1.00 V, which is the highest value of Y-series OSC devices to the best of our knowledge. Therefore, by utilizing higher Voc of OR-PBO binary blends, B12-PBO and B16-PBO are incorporated into the PM6:BTP-PBO-4F-based binary blend and fabricated ternary devices. As a result, the PM6:BTP-PBO-4F:B12-PBO ternary device delivers the best PCE of 15.60% with an increasing Voc and FF concurrently.

Biomimetic Strain-Stiffening in Chitosan Self-Healing Hydrogels.

The strain-stiffening and self-healing capabilities of biological tissues enable them to preserve the structures and functions from deformation and damage. However, biodegradable hydrogel materials with both of these biomimetic characteristics have not been explored. Here, a series of strain-stiffened, self-healing hydrogels are developed through dynamic imine crosslinking of semiflexible O-carboxymethyl chitosan (main chain) and flexible dibenzaldehyde-terminated telechelic poly(ethylene glycol) (crosslinker). The biomimetic hydrogels can be reversibly stiffened to resist the deformation and can even recover to their original state after repeated damages. The mechanical properties and stiffening responses of the hydrogels are tailored by varying the component contents (1-3%) and the crosslinker length (4 or 8 kDa). A combinatorial system of in situ coherent small-angle X-ray scattering with rheological testing is developed to investigate the network structures (in sizes 1.5-160 nm) of hydrogels under shear strains and reveals that the strain-stiffening originates from the fibrous chitosan network with poly(ethylene glycol) crosslinking fixation. The biomimetic hydrogels with biocompatibility and biodegradability promote wound healing. The study provides an insight into the nanoscale design of biomimetic strain-stiffening self-healing hydrogels for biomedical applications.

Charge-Discharge Mechanism of High-Entropy Co-Free Spinel Oxide Toward Li+ Storage Examined Using Operando Quick-Scanning X-Ray Absorption Spectroscopy.

Transition metal high-entropy oxides (HEOs) are an attractive class of anode materials for high-performance lithium-ion batteries (LIBs). However, owing to the multiple electroactive centers of HEOs, the Li+ storage mechanism is complex and debated in the literature. In this work, operando quick-scanning X-ray absorption spectroscopy (XAS) is used to study the lithiation/delithiation mechanism of the Cobalt-free spinel (CrMnFeNiCu)3 O4 HEO. A monochromator oscillation frequency of 2 Hz is used and 240 spectra are integrated to achieve a 2 min time resolution. High-photon-flux synchrotron radiation is employed to increase the XAS sensitivity. The results indicate that the Cu2+ and Ni2+ cations are reduced to their metallic states during lithiation but their oxidation reactions are less favorable compared to the other elements upon delithiation. The Mn2+/3+ and Fe2+/3+ cations undergo two-step conversion reactions to form metallic phases, with MnO and FeO as the intermediate species, respectively. During delithiation, the oxidation of Mn occurs prior to that of Fe. The Cr3+ cations are reduced to CrO and then Cr0 during lithiation. A relatively large overpotential is required to activate the Cr reoxidation reaction. The Cr3+ cations are found after delithiation. These results can guide the material design of HEOs for improving LIB performance.

Circular Polarization Luminescence of Groove Anchor Driving Optically Active Poly(methyl methacrylate) Stereocomplexes.

This paper presents a facile method for fabricating a thin-film sample with a high asymmetry value of induced circularly polarized luminescence (iCPL) (|glum| = 2.0 × 10-3). The method involves mixing stereoregular poly(methyl methacrylate) (PMMA) and chiral chromophore (2,2,2-trifluoro-1-(9-anthryl)ethanol (TFAE)) to form a complex with a dynamic helical conformation of poly(methyl methacrylate) (PMMA) associated with TFAE via hydrogen bonding. This dynamic helical conformation can be stabilized by the stereocomplexation of a pair of stereoregular PMMA, where the TFAE is sandwiched between a double-helix isotactic PMMA and single-helix syndiotactic PMMA, resulting in a preferential one-handed helical conformation with a high value of iCPL from self-assembly.