RESUMEN
Commercial hollow fiber filters for micro- and ultrafiltration are based on size exclusion and do not allow the removal of small molecules such as antibiotics. Here, we demonstrate that a graphene oxide (GO) layer can be firmly immobilized either inside or outside polyethersulfone-polyvinylpyrrolidone hollow fiber (Versatile PES®, hereafter PES) modules and that the resulting core-shell fibers inherits the microfiltration ability of the pristine PES fibers and the adsorption selectivity of GO. GO nanosheets were deposited on the fiber surface by filtration of a GO suspension through a PES cartridge (cut-off 0.1-0.2 µm), then fixed by thermal annealing at 80 °C, rendering the GO coating stably fixed and unsoluble. The filtration cut-off, retention selectivity and efficiency of the resulting inner and outer modified hollow fibers (HF-GO) were tested by performing filtration on water and bovine plasma spiked with bovine serum albumin (BSA, 66 kDa, ≈15 nm size), monodisperse polystyrene nanoparticles (52 nm and 303 nm sizes), with two quinolonic antibiotics (ciprofloxacin and ofloxacin) and rhodamine B (RhB). These tests showed that the microfiltration capability of PES was retained by HF-GO, and in addition the GO coating can capture the molecular contaminants while letting through BSA and smaller polystyrene nanoparticles. Combined XRD, molecular modelling and adsorption experiments show that the separation mechanism does not rely only on physical size exclusion, but involves intercalation of solute molecules between the GO layers.
RESUMEN
Histone deacetylases, HDACs, have been demonstrated to play a critical role in epigenetic signaling and were found to be overexpressed in several type of cancers; therefore, they represent valuable targets for anticancer therapy. 9-Hydroxystearic acid has been shown to bind the catalytic site of HDAC1, inducing G0/G1 phase cell cycle arrest and activation of the p21WAF1 gene, thus promoting cell growth inhibition and differentiation in many cancer cells. Despite the ( R) enantiomer of 9-hydroxystearic acid (9R) displaying a promising in vitro growth-inhibitory effect on the HT29 cell line, its scarce water solubility and micromolar activity require novel solutions for improving its efficacy and bioavailability. In this work, we describe the synthesis and in vitro biological profiling of 9R keratin nanoparticles (9R@ker) obtained through an in-water drug-induced aggregation process. The anticancer activity of 9R@ker was investigated in the HT29 cell line; the results indicate an increased fluidity of cell membrane and a higher intracellular ROS formation, resulting in an unexpected S phase cell cycle arrest (25% increase as compared to the control) induced by 9R@ker with respect to free 9R and an induction of cell death.
Asunto(s)
Adenocarcinoma/patología , Neoplasias del Colon/patología , Descubrimiento de Drogas/métodos , Queratinas/química , Nanopartículas/química , Puntos de Control de la Fase S del Ciclo Celular/efectos de los fármacos , Ácidos Esteáricos/química , Albúminas/química , Membrana Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Técnicas de Química Sintética/métodos , Células HCT116 , Células HT29 , Histona Desacetilasa 1/antagonistas & inhibidores , Humanos , Especies Reactivas de Oxígeno/metabolismo , Transducción de Señal/efectos de los fármacos , Solubilidad , Ácidos Esteáricos/farmacologíaRESUMEN
The development of polymeric fabrics with photoinduced antibacterial activity is important for different emerging applications, ranging from materials for medical and clinical practices to disinfection of objects for public use. In this work we prepared a series of cellulose acetate membranes, by means of phase inversion technique, introducing different additives in the starting polymeric solution. The loading of 5,10,15,20-tetraphenylporphyrin (TPP), a known photosensitizer, was considered to impart antibacterial photodynamic properties to the produced membranes. Besides, the addition of a surfactant (Pluronic F-127) allowed to modify the morphology of the membranes whereas the use of graphene oxide (GO) enabled further photo-activated antibacterial activity. The three additives were tested in various concentrations and in different combinations in order to carefully explore the effects of their mixing on the final photophysical and photodynamic properties. A complete structural/morphologycal characterization of the produced membranes has been performed, together with a detailed photophysical study of the TPP-containing samples, including absorption and emission features, excited state lifetime, singlet oxygen production, and confocal analysis. Their antibacterial activity has been assessed in vitro against S. aureus and E. coli, and the results demonstrated excellent bacterial inactivation for the membranes containing a combination of the three additives, revealing also a non-innocent role of the membrane porous structure in the final antibacterial capacity.
RESUMEN
In recent years there has been a growing interest in the use of proteins as biocompatible and environmentally friendly biomolecules for the design of wound healing and drug delivery systems. Keratin is a fascinating protein, obtainable from several keratinous biomasses such as wool, hair or nails, with intrinsic bioactive properties including stimulatory effects on wound repair and excellent carrier capability. In this work keratin/poly(butylene succinate) blend solutions with functional properties tunable by manipulating the polymer blending ratios were prepared by using 1,1,1,3,3,3-hexafluoroisopropanol as common solvent. Afterwards, these solutions doped with rhodamine B (RhB), were electrospun into blend mats and the drug release mechanism and kinetics as a function of blend composition was studied, in order to understand the potential of such membranes as drug delivery systems. The electrophoresis analysis carried out on keratin revealed that the solvent used does not degrade the protein. Moreover, all the blend solutions showed a non-Newtonian behavior, among which the Keratin/PBS 70/30 and 30/70 ones showed an amplified orientation ability of the polymer chains when subjected to a shear stress. Therefore, the resulting nanofibers showed thinner mean diameters and narrower diameter distributions compared to the Keratin/PBS 50/50 blend solution. The thermal stability and the mechanical properties of the blend electrospun mats improved by increasing the PBS content. Finally, the RhB release rate increased by increasing the keratin content of the mats and the drug diffused as drug-protein complex.
Asunto(s)
Butileno Glicoles/síntesis química , Sistemas de Liberación de Medicamentos/métodos , Diseño de Fármacos , Liberación de Fármacos , Queratinas/síntesis química , Nanofibras/química , Polímeros/síntesis química , Animales , Butileno Glicoles/farmacocinética , Queratinas/farmacocinética , Polímeros/farmacocinéticaRESUMEN
Water purification technologies possibly based on eco-sustainable, low cost, and multifunctional materials are being intensively pursued to resolve the current water scarcity and pollution. In this scenario, polysulfone hollow porous granules (PS-HPGs) prepared from scraps of the industrial production of polysulfone hollow fiber membranes were recently introduced as adsorbents and filtration materials for water and air treatment. Here, we report the functionalization of PS-HPGs with polydopamine (PD) nanoparticles for the preparation of a new versatile and efficient adsorbent material, namely, PSPD-HPGs. The in situ growth of PD under mild alkaline oxidative polymerization allowed us to stably graft PD on polysulfone granules. Enhanced removal efficiency of ofloxacin, an antibiotic drug, with an improvement up to 70% with respect to the pristine PS-HPGs, and removal of Zn(II) and Ni(II) were also observed after PD modification. Remarkably, removal of Cu(II) ions with an efficiency up to 80% was observed for PSPD-HPGs, whereas no adsorption was found for the PD-free precursor. Collectively, these data show that modification with a biocompatible polymer such as PD provides a simple and valuable tool to enlarge the field of application of polysulfone hollow granules for water remediation from both organic and metal cation contaminants.
RESUMEN
In this work, nano-hybrid electrospun non-woven mats made of wool keratin combined with diclofenac loaded hydrotalcites (HTD) were prepared and characterized as potential drug delivery systems and scaffolds for fibroblast cell growth. Nano-hybrid electrospun non-woven mats showed a good adaptability to wet skin, effortlessly conforming to the three-dimensional topography of the tissue. Nanosized HTD exercised an overall reinforcing action on the electrospun non-woven mats since the nanohybrid samples displayed a reduced swelling ratio and a slower degradation profile compared to keratin-based nanofiber non-woven mats containing free diclofenac, without negative effects on drug release. The cell viability test indicated a decreased toxicity of the drug when loaded into nanofibers and confirmed the biocompatibility of keratin/HTD electrospun non-woven mats; moreover, a controlled diclofenac release within the first 24 hours does not compromise the fibroblast cell growth in a significant manner.
Asunto(s)
Hidróxido de Aluminio/química , Vendajes , Queratinas/química , Hidróxido de Magnesio/química , Nanofibras/química , Animales , Antiinflamatorios no Esteroideos/química , Antiinflamatorios no Esteroideos/metabolismo , Supervivencia Celular/efectos de los fármacos , Diclofenaco/química , Diclofenaco/metabolismo , Liberación de Fármacos , Ratones , Microscopía Fluorescente , Células 3T3 NIH , Nanofibras/toxicidad , Resistencia al Corte , Viscosidad , Lana/metabolismoRESUMEN
The availability of clean, pure water is a major challenge for the future of our society. 2-Dimensional nanosheets of GO seem promising as nanoporous adsorbent or filters for water purification; however, their processing in macroscopic filters is challenging, and their cost vs. standard polymer filters is too high. Here, we describe a novel approach to combine graphene oxide (GO) sheets with commercial polysulfone (PSU) membranes for improved removal of organic contaminants from water. The adsorption physics of contaminants on the PSU-GO composite follows Langmuir and Brunauer-Emmett-Teller (BET) models, with partial swelling and intercalation of molecules in between the GO layers. Such a mechanism, well-known in layered clays, has not been reported previously for graphene or GO. Our approach requires minimal amounts of GO, deposited directly on the surface of the polymer, followed by stabilization using microwaves or heat. The purification efficiency of the PSU-GO composites is significantly improved vs. benchmark commercial PSU, as demonstrated by the removal of two model contaminants, rhodamine B and ofloxacin. The excellent stability of the composite is confirmed by extensive (100 hours) filtration tests in commercial water cartridges.
Asunto(s)
Grafito/química , Microondas , Nanotecnología/métodos , Polímeros/química , Sulfonas/química , Purificación del Agua/métodos , Adsorción , Análisis Costo-Beneficio , Ensayo de Materiales , Nanopartículas , Compuestos Orgánicos/química , Porosidad , Aguas Residuales , Contaminantes Químicos del Agua/aislamiento & purificación , Difracción de Rayos XRESUMEN
Doxorubicin is one of the most effective chemotherapeutic agents for the treatment of several neoplastic conditions, such as leukemia, neuroblastoma, soft tissue and bone sarcomas, breast cancer, ovarian cancer and others. However, its clinical application is limited by cardiotoxicity, such as cardiomyopathy, that once developed carries a poor prognosis and is frequently fatal. The controlled release of doxorubicin by means of a smart carrier is a strategy to overcome the aforementioned drawback. Herein, doxorubicin/keratin nanoparticles were prepared by loading the drug through ionic gelation and aggregation methods, without using cross linkers, organic solvents neither surfactants. Both methodologies afford nanoparticles with yields up to 100â¯wt%, depending on the loading amount of doxorubicin. Although aggregation yield smaller nanoparticles (≈100â¯nm), ionic gelation allows a higher drug loading (up to 30â¯wt%,). More importantly, nanoparticles obtained through this procedure display a pH-responsive release of the drug: indeed Peppas-Salhin model suggests that, the doxorubicin release mechanism is predominantly controlled by diffusion at pHâ¯7.4 and by protein swelling at pHâ¯5. Moreover, nanoparticles prepared by ionic gelation resulted in more efficient cell killing of MDA-MB-231 and MCF-7 breast cancer cells than those prepared by aggregation. Based on the herein presented preliminary results, ionic gelation emerges as a promising approach for the preparation of keratin-based doxorubicin nanocarriers for cancer therapy, that is worth to further investigate.
Asunto(s)
Doxorrubicina/química , Portadores de Fármacos/química , Queratinas/química , Nanopartículas/química , Solventes/química , Sistemas de Liberación de Medicamentos/métodos , Femenino , Humanos , Concentración de Iones de Hidrógeno , Células MCF-7RESUMEN
In this work, keratin films doped with different amounts of methylene blue (MB) were developed in order to prepare new biodegradable and biocompatible materials for tissue engineering and wound healing, able to exert antimicrobial photodynamic activity upon irradiation with visible light. Preliminary results indicated that the swelling ratio, as well as the MB release, increases by increasing the pH. Moreover, the generation of reactive oxygen species (ROS) and singlet oxygen can be easily triggered and controlled by a fine-tuning of the irradiation time and MB concentration in the films. As concerns the photodynamic effects on keratin, the ROS attack does not induce any significant photodegradation on the protein, even if a slight photo-oxidation of sulfonated amino acids occurs. Finally, the film with the highest MB concentration (400 µg per gram of keratin) displays a significant photobactericidal activity against Staphylococcus aureus with a bacterial reduction that increases by increasing the irradiation time. In particular, the irradiation of KFMB400 film incubated with S. aureus at a concentration of 10(8) cfu mL(-1) determined the 99.9% killing rate and the killing effect increased proportionally with irradiation time.
Asunto(s)
Antiinfecciosos/química , Queratinas/química , Azul de Metileno/química , Lana/metabolismo , Animales , Antiinfecciosos/farmacología , Concentración de Iones de Hidrógeno , Luz , Azul de Metileno/farmacología , Oxidación-Reducción , Especies Reactivas de Oxígeno/metabolismo , Oxígeno Singlete/metabolismo , Staphylococcus aureus/efectos de los fármacosRESUMEN
A facile and efficient method based on electrochemistry for the production of graphene-based materials for electronics is demonstrated. Uncharged acetonitrile molecules are intercalated in graphite by electrochemical treatment, owing to the synergic action of perchlorate ions dissolved in acetonitrile. Then, acetonitrile molecules are decomposed with microwave irradiation, which causes gas production and rapid graphite exfoliation, with an increase in the graphite volume of up to 600 %. Upon further processing and purification, highly dispersible nanosheets are obtained that can be processed into thin layers by roll-to-roll transfer or into thicker electrodes with excellent capacitance stability upon extensive charging/discharging cycles. The good exfoliation yield (>50 % of monolayers), minimal oxidation damage and good electrochemical stability of the nanosheets obtained were confirmed by scanning force and electron microscopy, as well as Raman spectroscopy and galvanostatic analyses.
RESUMEN
Functional poly(methyl methacrylate) core-shell microspheres were prepared by dispersion polymerization. An appropriate selection of experimental parameters and in particular of the initiator and stabilizer amount and of the medium solvency power allowed a monodisperse sample as large as 600 nm to be prepared. To this purpose, low initiator concentration, high steric stabilizer amount and a low solvency power medium were employed. The microspheres present a core-shell structure in which the outer shell is constituted by the steric stabilizer which affords carboxylic groups able to interact with basic proteins, such as trypsin, whose adsorption is essentially driven by the carboxylic group density in the microsphere shell. Finally, fluorescent microspheres were prepared for biodistribution studies and shown to be readily taken up by the cells both in vitro and in vivo. These results suggest that these microspheres are promising delivery systems for the development of novel protein-based vaccines.