RESUMEN
Large changes in the magnetization of ferromagnetic films can be electrically driven by non-180° ferroelectric domain switching in underlying substrates, but the shear components of the strains that mediate these magnetoelectric effects have not been considered so far. Here we reveal the presence of these shear strains in a polycrystalline film of Ni on a 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 substrate in the pseudo-cubic (011)pc orientation. Although vibrating sample magnetometry records giant magnetoelectric effects that are consistent with the hitherto expected 90° rotations of a global magnetic easy axis, high-resolution vector maps of magnetization (constructed from photoemission electron microscopy data, with contrast from X-ray magnetic circular dichroism) reveal that the local magnetization typically rotates through smaller angles of 62-84°. This shortfall with respect to 90° is a consequence of the shear strain associated with ferroelectric domain switching. The non-orthogonality represents both a challenge and an opportunity for the development and miniaturization of magnetoelectric devices.
RESUMEN
Using out-of-plane magnetized layers, a lateral shift register made from discrete elements is demonstrated. By carefully designing the in-plane shape of the elements which make up the shift register, both the position of nucleation of new domains and the coercivity of the element can be controlled. The dipole field from a neighboring element, placed tens of nanometers away, creates a bias field on the nucleation site, which can be used to create a NOT gate. By chaining these NOT gates together, a shift register can be created where data bits consisting of neighboring layers with aligned magnetization are propagated synchronously under a symmetric applied magnetic field. The operation of a 16 element shift register is shown, including field coupled data injection.
RESUMEN
Applications based on the movement of domain walls (DWs) in magnetic nanowires (NWs) require a good DW conduit behavior, i.e. a significant difference between DW nucleation and propagation fields. In this work, we have systematically studied how this property evolves in cobalt NWs grown by focused electron beam induced deposition (FEBID) as a function of global gallium irradiation, for irradiation doses up to 1.24 × 10(17) ions cm(-2). Whereas for high doses the DW conduit is lost, below 6.42 × 10(15) ions cm(-2) the difference between the two fields increases with irradiation, becoming up to â¼9 times larger than for non-irradiated wires, due to a strong increase in the nucleation field, while the propagation field remains approximately constant. This behavior stems from two effects. The first effect is a decrease in the magnetic volume of the parasitic halo around the NW, typically present in FEBID nanostructures, leading to the disappearance of weak nucleation centers. The second effect is the formation of a 20 nm outer shell with Co crystals about twice the size of those forming the NW core, causing a net increase of the local magnetocrystalline anisotropy. The results presented here are important for the potential use of magnetic NWs grown by FEBID in DW-based devices, and might also be of interest for magnetic NWs fabricated by other techniques.
RESUMEN
In domain wall (DW) excitation experiments, nonlinearity (NL) intrinsic to the DW dynamics is often hard to distinguish from perturbation due to the confining potential or DW distortion. Here we numerically investigate the dynamic oscillations of magnetostatically coupled DWs: a system well understood in the quasistatic limit. NL is observed, even for a harmonic potential, due to the intrinsic DW motion. This behavior is principally dependent on terms normally associated with the DW canonical momentum and is in contrast with a NL restoring potential. This NL is not observable in quasistatic measurements, relatively insensitive to the confining potential, and may be tuned by the nanowire parameters. The shown NLs are present in any DW restoring potential and must be accounted for when probing DW potential landscapes.
RESUMEN
Modern fabrication technology has enabled the study of submicron ferromagnetic strips with a particularly simple domain structure, allowing single, well-defined domain walls to be isolated and characterized. However, these domain walls have complex field-driven dynamics. The wall velocity initially increases with field, but above a certain threshold the domain wall abruptly slows down, accompanied by periodic transformations of the domain wall structure. This behaviour is potentially detrimental to the speed and proper functioning of proposed domain-wall-based devices, and although methods for suppression of the breakdown have been demonstrated in simulations, a convincing experimental demonstration is lacking. Here, we show experimentally that a series of cross-shaped traps acts to prevent transformations of the domain wall structure and increase the domain wall velocity by a factor of four compared to the maximum velocity on a plain strip. Our results suggest a route to faster and more reliable domain wall devices for memory, logic and sensing.
RESUMEN
Domain wall (DW) pinning in ferromagnetic nanowires is in general a complex process. Distortions of the DW shape make quantitative agreement between modeling and experiment difficult. Here we demonstrate pinning using nanometer scale localized stray fields. This type of interaction gives well-characterized, tailorable potential landscapes that do not appreciably distort the DW. Our experimental results are in excellent quantitative agreement with an Arrhenius-Néel model of depinning--a result only possible when the modeled potential profile agrees fully with that experienced by the DW.
RESUMEN
Biofilm colonisation of surfaces is of critical importance in various areas ranging from indwelling medical devices to industrial setups. Of particular importance is the reduced susceptibility of bacteria embedded in a biofilm to existing antimicrobial agents. In this paper, we demonstrate that remotely actuated magnetic cantilevers grafted on a substrate act efficiently in preventing bacterial biofilm formation. When exposed to an alternating magnetic field, the flexible magnetic cantilevers vertically deflect from their initial position periodically, with an extremely low frequency (0.16 Hz). The cantilevers' beating prevents the initial stage of bacterial adhesion to the substrate surface and the subsequent biofilm growth. Our experimental data on E. coli liquid cultures demonstrate up to a 70% reduction in biofilm formation. A theoretical model has been developed to predict the amplitude of the cantilevers vertical deflection. Our results demonstrate proof-of-concept for a device that can magneto-mechanically prevent the first stage in bacterial biofilm formation, acting as on-demand fouling release active surfaces.
Asunto(s)
Antibacterianos/administración & dosificación , Biopelículas/crecimiento & desarrollo , Infecciones por Escherichia coli/prevención & control , Escherichia coli/crecimiento & desarrollo , Magnetismo , Microtecnología/instrumentación , Adhesión Bacteriana , Biopelículas/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Infecciones por Escherichia coli/microbiología , Humanos , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Using photoemission electron microscopy (PEEM) to image ferromagnetism in polycrystalline Ni disks, and ferroelectricity in their single-crystal BaTiO3 substrates, we find that voltage-driven 90° ferroelectric domain switching serves to reversibly annihilate each magnetic vortex via uniaxial compressive strain, and that the orientation of the resulting bi-domain reveals the chirality of the annihilated vortex. Micromagnetic simulations reveal that only 60% of this strain is required for annihilation. Voltage control of magnetic vortices is novel, and should be energetically favourable with respect to the use of a magnetic field or an electrical current. In future, stray field from bi-domains could be exploited to read vortex chirality. Given that core polarity can already be read via stray field, our work represents a step towards four-state low-power memory applications.
RESUMEN
We systematically study individual micro- and nanometric polycrystalline cobalt wires grown by focused-electron-beam-induced-deposition. The deposits were grown in a range of aspect ratios varying from 1 up to 26. The minimum lateral dimension of the nanowires was 150 nm, for a thickness of 40 nm. Atomic force microscopy images show beam-current-dependent profiles, associated with different regimes of deposition. The magnetization reversal of individual nanowires is studied by means of the spatially resolved magneto-optical Kerr effect. Abrupt switching is observed, with a systematic dependence on the wire's dimensions. This dependence of the coercive field is understood in magnetostatic terms, and agrees well with previous results on cobalt wires grown with different techniques. The influence of compositional gradients along the structural profile on the magnetic reversal is studied by using micromagnetic simulations. This work demonstrates the feasibility of using this technique to fabricate highly pure magnetic nanostructures, and highlights the advantages and disadvantages of the technique with respect to more conventional ones.
RESUMEN
In this article, we demonstrate the magneto-mechanic behavior in a fluid environment of perpendicularly magnetized microdiscs with antiferromagnetic interlayer coupling. When suspended in a fluid and under the influence of a simple uniaxial applied magnetic field sequence, the microdiscs mechanically rotate to access the magnetic saturation processes that are either that of the easy axis, hard axis, or in-between the two, in order to lower their energy. Further, these transitions enable the magnetic particles to form reconfigurable magnetic chains, and transduce torque from uniaxial applied fields. These microdiscs offer an attractive platform for the fabrication of fluid based micro- and nanodevices, and dynamically self assembled complex architectures.
RESUMEN
Magnetic micro and nanoparticles are increasingly used in biotechnological applications due to the ability to control their behavior through an externally applied field. We demonstrate the fabrication of particles made from ultrathin perpendicularly magnetized CoFeB/Pt layers with antiferromagnetic interlayer coupling. The particles are characterized by zero moment at remanence, low susceptibility at low fields, and a large saturated moment created by the stacking of the basic coupled bilayer motif. We demonstrate the transfer of magnetic properties from thin films to lithographically defined 2 µm particles which have been lifted off into solution. We simulate the minimum energy state of a synthetic antiferromagnetic bilayer system that is free to rotate in an applied field and show that the low field susceptibility of the system is equal to the magnetic hard axis followed by a sharp switch to full magnetization as the field is increased. This agrees with the experimental results and explains the behaviour of the particles in solution.
RESUMEN
The dynamic injection and propagation of domain walls (DWs) in technologically relevant geometries have been investigated. On short (~10 ns) timescales nucleation of a DW by a localized Oersted field is found to be well described using a Néel-Brown reversal mode. Using locally injected DWs, we test the propagation of DWs over long distances (~100 µm) in close proximity nanowires and beyond the Walker breakdown limit. In nanowires that act as true conduits to a DW, data can be successfully propagated without loss or inter-wire cross-talk. This is in contrast to poorly characterized systems where the DW is found to propagate asynchronously above the critical breakdown field.
RESUMEN
The interaction of two domain walls (DWs) at a cross-shaped vertex fabricated from two ferromagnetic nanowires has been experimentally investigated. Both magnetostatically repulsive and attractive interactions have been probed. It is found that in the repulsive case, a passing DW may directly induce the depinning of another that is already pinned at a vertex. This effect can be qualitatively described by considering only simple, magnetostatic-charge-based arguments. In the attractive case, however, asymmetric pinning is found, with complete suppression of depinning possible. This observed effect is contrary to simple charge-based arguments and highlights the need for full micromagnetic characterization of the DW interactions in more complex systems.
RESUMEN
The magnetostatic interaction between two oppositely charged transverse domain walls (TDWs) in adjacent Permalloy nanowires is experimentally demonstrated. The dependence of the pinning strength on wire separation is investigated for distances between 13 and 125 nm. The results can be described fully by considering the distribution of magnetic charge within rigid, isolated TDWs. Alternative DW internal structure cannot reproduce this observed dependence. Modeling suggests the TDW internal structure is not appreciably disturbed, and remains rigid although the pinning strength is significant.
RESUMEN
The motion of transverse domain walls (DWs) in thin Permalloy nanowires has been studied by locally detecting the chirality of the moving DW, using a cross-shaped trap acting as a chirality filter. We find that structural changes of the DW occur over a characteristic minimum distance: the "DW fidelity length." The measured field dependence of the fidelity length is in good qualitative agreement with a 1D analytical model and with published results of numerical simulations and experiments. We also demonstrate extension of the fidelity length to meter length scales using a series of filters.
RESUMEN
"Spintronics," in which both the spin and charge of electrons are used for logic and memory operations, promises an alternate route to traditional semiconductor electronics. A complete logic architecture can be constructed, which uses planar magnetic wires that are less than a micrometer in width. Logical NOT, logical AND, signal fan-out, and signal cross-over elements each have a simple geometric design, and they can be integrated together into one circuit. An additional element for data input allows information to be written to domain-wall logic circuits.
RESUMEN
An all-metallic submicrometer device is demonstrated experimentally at room temperature that performs logical NOT operations on magnetic logic signals. When this two-terminal ferromagnetic structure is incorporated into a magnetic feedback loop, the junction performs a frequency division operation on an applied oscillating magnetic field. Up to 11 of these junctions are then directly linked together to create a magnetic shift register.