RESUMEN
While N-heterocyclic carbenes (NHCs) have recently been shown to be effective ligands for gold nanoclusters, very few examples of heterometallic clusters incorporating nongroup 11 metals are known. We present herein an Au-Pt NHC cluster featuring a crown-shaped [Au8Pt(NHC)8]2+ core, produced in high yield without the need for chromatographic purification. The method was largely independent of the substitution pattern of the NHC backbone; however, bulky wingtip groups were needed for clean conversion to the Au8Pt cluster. Clusters were characterized using single crystal X-ray diffraction, multinuclear nuclear magnetic resonance, electrospray ionization mass spectroscopy, and ultraviolet-visible spectroscopy, and electrochemical features of the cluster are also presented. A detailed analysis of the in-progress reaction mixture by ESI-MS supports the direct involvement of Au-H species as intermediates in cluster formation. These studies further demonstrate that NHC wingtip sterics play a key part in determining the nature of the initial cluster species, providing critical information for the generation of new NHC-stabilized nanoclusters.
RESUMEN
This perspective highlights advances in the preparation and understanding of metal nanoclusters stabilized by organic ligands with a focus on N-heterocyclic carbenes (NHCs). We demonstrate the need for a clear understanding of the relationship between NHC properties and their resulting metal nanocluster structure and properties. We emphasize the importance of balancing nanocluster stability with the introduction of reactive sites for catalytic applications and the importance of a better understanding of how these clusters interact with their environments for effective use in biological applications. The impact of atom-scale simulations, development of atomic interaction potentials suitable for large-scale molecular dynamics simulations, and a deeper understanding of the mechanisms behind synthetic methods and physical properties (e.g., the bright fluorescence displayed by many clusters) are emphasized.
RESUMEN
N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on gold have received considerable attention, but little is known about the lateral interactions between neighboring NHC molecules, their stability when subjected to aggressive oxidizing/reducing conditions, and their interactions with solution ions, all of which are essential for their use in a wide range of applications. To address these deficiencies, we present a comprehensive investigation of two different ferrocene (Fc)-terminated NHC SAMs with different chain lengths and linking groups. Pure monolayers of Fc-terminated NHCs display only a single, symmetrical pair of redox peaks, implying the formation of a homogeneous SAM structure with uniformly distributed Fc/Fc+ redox centers. By comparison, pure Fc-alkylthiol SAMs exhibit complex and impractical redox chemistry and require surface dilution in order to achieve reproducible properties. The NHC SAMs examined in this study exhibit very fast Fc redox kinetics and comparable or even superior stability against the application of multiple potential cycles or long-time holding at constant potential compared to alkylthiol SAMs. Furthermore, ion pairing of Fc+ and hydrophobic perchlorate and other hydrophilic anions is observed with Fc-NHC SAMs, highlighting conditions favorable for future applications of these monolayers. This study should therefore shed light on the very promising characteristics of redox-active NHC SAMs as an alternative to traditional Fc-alkylthiol SAMs for multiple practical applications, including in sensors and electrocatalysis.
RESUMEN
N-heterocyclic carbene ligands (NHCs) are increasingly used to tune the properties of metal surfaces. The generally greater chemical and thermal robustness of NHCs on gold, as compared to thiolate surface ligands, underscores their potential for a range of applications. While much is now known about the adsorption geometry, overlayer structure, dynamics, and stability of NHCs on coinage elements, especially gold and copper, much less is known about their interaction with the surfaces of Pt-group metals, despite the importance of such metals in catalysis and electrochemistry. In this study, reflection absorption infrared spectroscopy (RAIRS) is used to probe the structure of benzimidazolylidene NHC ligands on Pt(111) and Ru(0001). The experiments exploit the intense absorption peaks of a CF3 substituent on the phenyl ring of the NHC backbone to provide unprecedented insight into adsorption geometry and chemical stability. The results also permit comparison with literature data for NHC ligands on Au(111) and to DFT predictions for NHCs on Pt(111) and Ru(0001), thereby greatly extending the known surface chemistry of NHCs and providing much needed molecular information for the design of metal-organic hybrid materials involving strongly reactive metals.
RESUMEN
Herein we report the first chiral Au10 nanoclusters stabilized by chiral bis N-heterocyclic carbene (bisNHC) ligands. ESI-MS and single-crystal X-ray crystallography confirmed the molecular formula to be [Au10(bisNHC)4Br2](O2CCF3)2. The chiral Au10 nanocluster adopts a linear edge-shared tetrahedral geometry with a prolate shape. DFT calculations provide insight into the electronic structure, optical absorption, and circular dichroism (CD) characteristics of this unique Au10 nanocluster. CD spectra demonstrate chirality transfer from the chiral bisNHC ligand to the inner Au10 nanocluster core. Examination of ESI-MS and UV-vis spectra show that cluster [Au9(bisNHC)4Br]Br2 is formed initially and then transformed into the Au10 nanocluster in solution.
RESUMEN
Atomically precise hydrido gold nanoclusters are extremely rare but interesting due to their potential applications in catalysis. By optimization of molecular precursors, we have prepared an unprecedented N-heterocyclic carbene-stabilized hydrido gold nanocluster, [Au24(NHC)14Cl2H3]3+. This cluster comprises a dimer of two Au12 kernels, each adopting an icosahedral shape with one missing vertex. The two kernels are joined through triangular faces, which are capped with a total of three hydrides. The hydrides are detected by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy, with density functional theory calculations supporting their position bridging the six uncoordinated gold sites. The reactivity of this Au24H3 cluster in the electrocatalytic reduction of CO2 is demonstrated and benchmarked against related catalysts.
RESUMEN
In recent years, the use of organosulfones as a new class of cross-coupling partner in transition-metal catalyzed reactions has undergone significant advancement. In this personal account, our recent investigations into desulfonylative cross-coupling reactions of benzylic sulfone derivatives catalyzed by Pd, Ni, and Cu catalysis is described. Combined with the facile α-functionalizations of sulfones, our methods can be used to form valuable multiply-arylated structures such as di-, tri-, and, tetraarylmethanes from readily available substrates. The reactivity of sulfones can be increased by introducing electron-withdrawing substituents such as 3,5-bis(trifluoromethyl)phenyl and trifluoromethyl groups, which enable more challenging cross-coupling reactions. Reactive intermediates including Cu-carbene complexes were identified as key intermediates in sulfone activation, representing new types of C-SO2 bond activation processes. These results indicate sulfones are powerful functional groups, enabling new catalytic desulfonylative transformations.
RESUMEN
Aldimines and ketimines containing electron-donating and electron-withdrawing groups can be hydrosilylated with borenium catalysts at as low as 1 mol% catalyst loading at room temperature, providing the corresponding secondary amines in excellent yields. Reactions with 2-phenylquinoline gave the 1,4-hydrosilylquinoline product selectively which can be further functionalized in a one-pot synthesis to give unique γ-amino alcohol derivatives. Control experiments suggest that the borenium ion catalyzes both the hydrosilylation and subsequent addition to the aldehyde.
RESUMEN
N-Heterocyclic carbenes (NHCs) have become one of the most widely studied class of ligands in molecular chemistry and have found applications in fields as varied as catalysis, the stabilization of reactive molecular fragments, and biochemistry. More recently, NHCs have found applications in materials chemistry and have allowed for the functionalization of surfaces, polymers, nanoparticles, and discrete, well-defined clusters. In this review, we provide an in-depth look at recent advances in the use of NHCs for the development of functional materials.
RESUMEN
The unprecedented synthesis of gem-difluoroalkenes through the Ramberg-Bäcklund reaction of alkyl triflones is described herein. Structurally diverse, fully substituted gem-difluoroalkenes that are difficult to prepare by other methods can be easily prepared from readily available triflones by treatment with specific Grignard reagents. Experimental and computational studies provide insight into the unique and critical role of the Grignard reagent, which serves both as a base to remove the α-proton and as a Lewis acid to assist C-F bond activation.
RESUMEN
Benzimidazolium hydrogen carbonate salts have been shown to act as N-heterocyclic carbene precursors, which can remove oxide from copper oxide surfaces and functionalize the resulting metallic surfaces in a single pot. Both the surfaces and the etching products were fully characterized by spectroscopic methods. Analysis of surfaces before and after NHC treatment by X-ray photoelectron spectroscopy demonstrates the complete removal of copper(II) oxide. By using 13 C-labelling, we determined that the products of this transformation include a cyclic urea, a ring-opened formamide and a bis-carbene copper(I) complex. These results illustrate the potential of NHCs to functionalize a much broader class of metals, including those prone to oxidation, greatly facilitating the preparation of NHC-based films on metals other than gold.
RESUMEN
Gold superatom nanoclusters stabilized entirely by N-heterocyclic carbenes (NHCs) and halides are reported. The reduction of well-defined NHC-Au-Cl complexes produces clusters comprised of an icosahedral Au13 core surrounded by a symmetrical arrangement of nine NHCs and three chlorides. X-ray crystallography shows that the clusters are characterized by multiple CH-π and π-π interactions, which rigidify the ligand and likely contribute to the exceptionally high photoluminescent quantum yields observed, up to 16.0%, which is significantly greater than that of the most luminescent ligand-protected Au13 superatom cluster. Density functional theory analysis suggests that clusters are 8-electron superatoms with a wide HOMO-LUMO energy gap of 2 eV. Consistent with this, the clusters have high stability relative to phosphine stabilized clusters.
RESUMEN
A new method for the synthesis of benzhydryl amines from the reaction of readily available sulfone derivatives with amines is described. The Cu-catalyzed desulfonylative amination not only provides structurally diverse benzhydryl amines in good yields, but is also applicable to iterative and intramolecular aminations. Control experiments suggested that the formation of a Cu-carbene intermediate generated from the sulfone substrate, which represents a new route for desulfonylative transformations.
RESUMEN
Herein, we report the transition-metal free, pyridine-catalyzed desulfonative borylation of benzyl sulfones with bis(pinacolato)diboron (B2pin2). A variety of benzhydryl- and benzyl boronic esters could be synthesized from readily prepared sulfone derivatives. The borylation of cyclic sulfones accompanied by ring opening also proceeded to afford the corresponding sulfonate, which could be converted into functionalized sulfones and sulfonamides.
RESUMEN
Ring opening metathesis polymerization (ROMP) is a technique that allows the synthesis of well-defined linear polyolefins. Polymerization-induced self-assembly (PISA) involves the synthesis of amphiphilic block copolymers: a hydrophilic block is first polymerized homogeneously in solution (usually water) followed by polymerization of a second hydrophobic block, resulting in a diblock copolymer that self-assembles. In this communication, preliminary results of the development of PISA for the synthesis of amphiphilic block linear polyolefins via ROMP using a water-soluble PEGylated ruthenium alkylidene catalyst are presented. In the first step, a water-soluble modified-norbornene monomer was polymerized in water, then 1,5-cyclooctadiene was added to the system to produce amphiphilic block polyolefins. By varying the concentrations of hydrophilic versus hydrophobic monomer, stable latexes with final particles of ≈200 nm diameter were prepared.
Asunto(s)
Alcadienos/química , Técnicas de Química Sintética/métodos , Polimerizacion , Polímeros/química , Alcadienos/síntesis química , Catálisis , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Electrónica de Transmisión , Modelos Químicos , Estructura Molecular , Norbornanos/química , Polienos/síntesis química , Polienos/química , Polietilenglicoles/química , Polímeros/síntesis química , Rutenio/química , Agua/químicaRESUMEN
The synthesis of diblock and triblock linear polyolefins via ring opening metathesis polymerization (ROMP) in an aqueous nanoparticle dispersion is presented. The different block polyolefins are synthesized from the cyclic olefins 1,5-cyclooctadiene and norbornene (NB), using a water-soluble TEGylated ruthenium alkylidene catalyst, yielding the structures PCOD-b-PNB, PNB-b-PCOD, and PCOD-b-PNB-b-PCOD. High monomer conversion (>90%), monitored by NMR, is achieved in relatively short times (≈1 h) for the polymerization of each block. The livingness of the system, essential to obtain block copolymers, is confirmed by gel permeation chromatography. Latex particles' size during the multiple steps range between 90 and 150 nm. The results demonstrate that it is possible to obtain nanoparticle latexes from ROMP-based monomers with block copolymer architectures, creating the opportunity to copolymerize olefins bearing different functional groups for the synthesis of new materials.
Asunto(s)
Alcadienos/química , Norbornanos/química , Polímeros/síntesis química , Rutenio/química , Catálisis , Emulsiones , Estructura MolecularRESUMEN
We describe the development of a nickel-catalyzed Suzuki-Miyaura cross-coupling of tertiary benzylic and allylic sulfones with arylboroxines. A variety of tertiary sulfones, which can easily be prepared via a deprotonation-alkylation route, were reacted to afford symmetric and unsymmetric quaternary products in good yields. We highlight the use of either BrettPhos or Doyle's phosphines as effective ligands for these challenging desulfonative coupling reactions. The utility of this methodology was demonstrated in the concise synthesis of a vitamin D receptor modulator analogue.
RESUMEN
Highly stable gold nanoparticles (Au NPs) functionalized by bidentate N-heterocyclic carbene (NHC) ligands have been synthesized by top-down and bottom-up approaches. A detailed study of the effect of alkylation, denticity, and method of synthesis has led to the production of NHC-stabilized nanoparticles with higher thermal stability than bi- and tridentate thiol-protected Au NPs and than monodentate NHC-stabilized NPs. Importantly, bidentate NHC-protected NPs also displayed unprecedented stability to external thiol, which has been an unsolved problem to date with all nanoparticles. Thus, multidentate NHC ligands are an important, and as yet unrecognized, step forward for the preparation of high stability nanomaterials.
RESUMEN
The Suzuki-Miyaura cross-coupling reaction has emerged as one of the most powerful methods for the construction of carbon-carbon bonds. Though most widely utilized for the synthesis of sp2-sp2 linkages, the use of this reaction to form stereochemistry-bearing sp2-sp3 bonds has received widespread attention over the past decade. This Perspective highlights approaches to the synthesis of enantioenriched molecules via the Suzuki-Miyaura reaction. Particular focus is placed on the use of enantiomerically enriched organoboron compounds as coupling partners in stereospecific processes, as well as the development of enantioconvergent and group-selective reactions. In addition, progress in the development of chemoselective, iterative cross-coupling methods will be discussed.
RESUMEN
Self-assembled monolayers of N-heterocyclic carbenes (NHCs) on copper are reported. The monolayer structure is highly dependent on the N,N-substituents on the NHC. On both Cu(111) and Au(111), bulky isopropyl substituents force the NHC to bind perpendicular to the metal surface while methyl- or ethyl-substituted NHCs lie flat. Temperature-programmed desorption studies show that the NHC binds to Cu(111) with a desorption energy of Edes =152±10â kJ mol-1 . NHCs that bind upright desorb cleanly, while flat-lying NHCs decompose leaving adsorbed organic residues. Scanning tunneling microscopy of methylated NHCs reveals arrays of covalently linked dimers which transform into adsorbed (NHC)2 Cu species by extraction of a copper atom from the surface after annealing.