Enhancing ion selectivity by tuning solvation abilities of covalent-organic-framework membranes.

Understanding the molecular-level mechanisms involved in transmembrane ion selectivity is essential for optimizing membrane separation performance. In this study, we reveal our observations regarding the transmembrane behavior of Li+ and Mg2+ ions as a response to the changing pore solvation abilities of the covalent-organic-framework (COF) membranes. These abilities were manipulated by adjusting the lengths of the oligoether segments attached to the pore channels. Through comparative experiments, we were able to unravel the relationships between pore solvation ability and various ion transport properties, such as partitioning, conduction, and selectivity. We also emphasize the significance of the competition between Li+ and Mg2+ with the solvating segments in modulating selectivity. We found that increasing the length of the oligoether chain facilitated ion transport; however, it was the COF membrane with oligoether chains containing two ethylene oxide units that exhibited the most pronounced discrepancy in transmembrane energy barrier between Li+ and Mg2+, resulting in the highest separation factor among all the evaluated membranes. Remarkably, under electro-driven binary-salt conditions, this specific COF membrane achieved an exceptional Li+/Mg2+ selectivity of up to 1352, making it one of the most effective membranes available for Li+/Mg2+ separation. The insights gained from this study significantly contribute to advancing our understanding of selective ion transport within confined nanospaces and provide valuable design principles for developing highly selective COF membranes.

Enhancing Sustainable Energy Conversion Efficiency by Incorporating Photoelectric Responsiveness into Multiporous Ionic Membrane.

The evolution of porous membranes has revitalized their potential application in sustainable osmotic-energy conversion. However, the performance of multiporous membranes deviates significantly from the linear extrapolation of single-pore membranes, primarily due to the occurrence of ion-concentration polarization (ICP). This study proposes a robust strategy to overcome this challenge by incorporating photoelectric responsiveness into permselective membranes. By introducing light-induced electric fields within the membrane, the transport of ions is accelerated, leading to a reduction in the diffusion boundary layer and effectively mitigating the detrimental effects of ICP. The developed photoelectric-responsive covalent-organic-framework membranes exhibit an impressive output power density of 69.6 W m-2 under illumination, surpassing the commercial viability threshold by ≈14-fold. This research uncovers a previously unexplored benefit of integrating optical electric conversion with reverse electrodialysis, thereby enhancing energy conversion efficiency.

Porous Supramolecular Assemblies for Efficient Suzuki Coupling of Aryl Chlorides.

The development of catalytic systems that can activate aryl chlorides for palladium-catalyzed cross-coupling reactions is at the forefront of ongoing efforts to synthesize fine chemicals. In this study, a facile ligand-template approach is adopted to achieve active-site encapsulation by forming supramolecular assemblies; this bestowed the pristine inert counterparts with reactivity, which is further increased upon the construction of a porous framework. Experimental results indicated that the isolation of ligands by the surrounding template units is key to the formation of catalytically active monoligated palladium complexes. Additionally, the construction of porous frameworks using the resulting supramolecular assemblies prevented the decomposition of the Pd complexes into nanoparticles, which drastically increased the catalyst lifetime. These findings, along with the simplicity and generality of the synthesis scheme, suggest that the strategy can be leveraged to achieve unique reactivity and potentially enable fine-chemical synthesis.

Changes in the Microbiota and their Roles in Patients with Type 2 Diabetes Mellitus.

An association between type 2 diabetes mellitus (T2DM) and gut microbiota is well established, but the results of related studies are inconsistent. The purpose of this investigation is to elucidate the characteristics of the gut microbiota in T2DM and non-diabetic subjects. Forty-five subjects were recruited for this study, including 29 T2DM patients and 16 non-diabetic subjects. Biochemical parameters, including body mass index (BMI), fasting plasma glucose (FPG), serum total cholesterol (TC), triglycerides (TG), high-density lipoprotein (HDL), and hemoglobin A1c (HbA1c), were analyzed and correlated with the gut microbiota. Bacterial community composition and diversity were detected in fecal samples using direct smear, sequencing, and real-time polymerase chain reaction (PCR). In this study, it was observed that indicators such as BMI, FPG, HbA1c, TC, and TG in T2DM patients were on the rise, concurrent with dysbiosis of the microbiota. We observed an increase in Enterococci and a decrease in Bacteroides, Bifidobacteria, and Lactobacilli in patients with T2DM. Meanwhile, total short-chain fatty acids (SCFAs) and D-lactate concentrations were decreased in the T2DM group. In addition, FPG was positively correlated with Enterococcus and negatively correlated with Bifidobacteria, Bacteroides, and Lactobacilli. This study reveals that microbiota dysbiosis is associated with disease severity in patients with T2DM. The limitation of this study is that only common bacteria were noted in this study, and more in-depth related studies are urgently needed.

Up/Down Tuning of Poly(ionic liquid)s in Aqueous Two-Phase Systems.

Thermally induced reversible up/down migration of poly(ionic liquid)s (PILs) in aqueous two-phase systems (ATPSs) was achieved for the first time in this study. Novel ATPSs were fabricated using azobenzene (Azo)- and benzyl (Bn)-modified PILs, and their upper and lower phases could be easily tuned using the grafting degree (GD) of the Azo and Bn groups. Bn-PIL with higher GDBn could go up into the upper phase and Azo-PIL come down to the lower phase when the temperature increased (>65 °C); this behavior was reversed at lower temperatures. Moreover, a reversible two-phase/single-phase transition was realized under UV irradiation. Experimental and simulation results revealed that the difference in the hydration capacity between Bn-PIL and Azo-PIL accounted for their unique phase-separation behavior. A versatile platform for fabricating ATPSs with tunable stimuli-responsive behavior can be realized based on our findings, which can broaden their applications in the fields of smart separation systems and functional material development.

Impact factors of the degradation of bisphenol A by nitrocellulose membrane under illumination.

Nitrocellulose membrane (NCM) can produce hydroxyl radicals under illumination, which promotes the oxidative degradation of organic pollutants. In this paper, NCM was used to oxidize bisphenol A (BPA) under simulated sunlight. The effects of pH, temperature, light intensity, anion and cation on the degradation of BPA were analyzed. The photodegradation process of BPA was discussed. The optimal photolysis rate was 0.031 min-1 when the temperature was 30°C, the light intensity was 2.67 × 104 Lux, and the pH value was 9.0. The alkaline environment, temperature and light intensity can promote the photodegradation of BPA. Except for nitrate ions, anions and cations can inhibit the photodegradation of BPA. Compared with cations, anions have a greater inhibitory effect on BPA degradation. The degradation products of BPA by NCM were analyzed by gas chromatographic/mass. This study may provide useful information for the BPA degradation by NCM in complex water samples.

Porous polymer catalysts with hierarchical structures.

The emergence of porous organic polymers (POPs) has provided great opportunities for new applications in heterogeneous catalysis owing to their unprecedented intrinsic structural features such as high surface areas, extraordinary framework stabilities and chemically adjustable compositions. In this tutorial review, representative recent developments in the POPs-based catalysts with hierarchically porous structures are presented. Various strategies for the syntheses of hierarchically porous polymers including hard-templating, soft-templating and template-free approaches and the design of catalytically active porous polymers including post-modification, co-polymerization and self-polymerization have been discussed. In addition, their catalytic properties are compared. Finally, we emphasize the importance of the synthesis of hierarchically porous polymer based heterogeneous catalysts using sustainable routes under template-free and metal-free conditions.

Highly Efficient Heterogeneous Hydroformylation over Rh-Metalated Porous Organic Polymers: Synergistic Effect of High Ligand Concentration and Flexible Framework.

A series of diphosphine ligand constructed porous polymers with stable and flexible frameworks have been successfully synthesized under the solvothermal conditions from polymerizing the corresponding vinyl-functionalized diphosphine monomers. These insoluble porous polymers can be swollen by a wide range of organic solvents, showing similar behavior to those of soluble analogues. Rather than just as immobilizing homogeneous catalysts, these porous polymers supported with Rh species demonstrate even better catalytic performance in the hydroformylations than the analogue homogeneous catalysts. The sample extraordinary performance could be attributed to the combination of high ligand concentration and flexible framework of the porous polymers. Meanwhile, they can be easily separated and recycled from the reaction systems without losing any activity and selectivity. This excellent catalytic performance and easy recycling heterogeneous catalyst property make them be very attractive. These diphosphine ligand constructed porous polymers may provide new platforms for the hydroformylation of olefins in the future.

SLoN: a spiking looming perception network exploiting neural encoding and processing in ON/OFF channels.

Looming perception, the ability to sense approaching objects, is crucial for the survival of humans and animals. After hundreds of millions of years of evolutionary development, biological entities have evolved efficient and robust looming perception visual systems. However, current artificial vision systems fall short of such capabilities. In this study, we propose a novel spiking neural network for looming perception that mimics biological vision to communicate motion information through action potentials or spikes, providing a more realistic approach than previous artificial neural networks based on sum-then-activate operations. The proposed spiking looming perception network (SLoN) comprises three core components. Neural encoding, known as phase coding, transforms video signals into spike trains, introducing the concept of phase delay to depict the spatial-temporal competition between phasic excitatory and inhibitory signals shaping looming selectivity. To align with biological substrates where visual signals are bifurcated into parallel ON/OFF channels encoding brightness increments and decrements separately to achieve specific selectivity to ON/OFF-contrast stimuli, we implement eccentric down-sampling at the entrance of ON/OFF channels, mimicking the foveal region of the mammalian receptive field with higher acuity to motion, computationally modeled with a leaky integrate-and-fire (LIF) neuronal network. The SLoN model is deliberately tested under various visual collision scenarios, ranging from synthetic to real-world stimuli. A notable achievement is that the SLoN selectively spikes for looming features concealed in visual streams against other categories of movements, including translating, receding, grating, and near misses, demonstrating robust selectivity in line with biological principles. Additionally, the efficacy of the ON/OFF channels, the phase coding with delay, and the eccentric visual processing are further investigated to demonstrate their effectiveness in looming perception. The cornerstone of this study rests upon showcasing a new paradigm for looming perception that is more biologically plausible in light of biological motion perception.

pH-Regulated reversible phase inversion of poly(ionic liquid) aqueous two-phase systems.

Smart aqueous two-phase systems (ATPSs) were fabricated using ferrocenyl and benzyl-modified poly(ionic liquid)s for the first time. The novel ATPSs were found to be pH-sensitive. The upper phase and lower phase could be inverted reversibly by adjusting the pH value of the ATPSs.

Giant gateable thermoelectric conversion by tuning the ion linkage interactions in covalent organic framework membranes.

Efficient energy conversion using ions as carriers necessitates membranes that sustain high permselectivity in high salinity conditions, which presents a significant challenge. This study addresses the issue by manipulating the linkages in covalent-organic-framework membranes, altering the distribution of electrostatic potentials and thereby influencing the short-range interactions between ions and membranes. We show that a charge-neutral covalent-organic-framework membrane with ß-ketoenamine linkages achieves record permselectivity in high salinity environments. Additionally, the membrane retains its permselectivity under temperature gradients, providing a method for converting low-grade waste heat into electrical energy. Experiments reveal that with a 3 M KCl solution and a 50 K temperature difference, the membrane generates an output power density of 5.70 W m-2. Furthermore, guided by a short-range ionic screening mechanism, the membrane exhibits adaptable permselectivity, allowing reversible and controllable operations by finely adjusting charge polarity and magnitude on the membrane's channel surfaces via ion adsorption. Notably, treatment with K3PO4 solutions significantly enhances permselectivity, resulting in a giant output power density of 20.22 W m-2, a 3.6-fold increase over the untreated membrane, setting a benchmark for converting low-grade heat into electrical energy.

Optimizing selectivity via membrane molecular packing manipulation for simultaneous cation and anion screening.

Advancing membranes with enhanced solute-solute selectivity is essential for expanding membrane technology applications, yet it presents a notable challenge. Drawing inspiration from the unparalleled selectivity of biological systems, which benefit from the sophisticated spatial organization of functionalities, we posit that manipulating the arrangement of the membrane's building blocks, an aspect previously given limited attention, can address this challenge. We demonstrate that optimizing the face-to-face orientation of building blocks during the assembly of covalent-organic-framework (COF) membranes improves ion-π interactions with multivalent ions. This optimization leads to extraordinary selectivity in differentiating between monovalent cations and anions from their multivalent counterparts, achieving selectivity factors of 214 for K+/Al3+ and 451 for NO3-/PO43-. Leveraging this attribute, the COF membrane facilitates the direct extraction of NaCl from seawater with a purity of 99.57%. These findings offer an alternative approach for designing highly selective membrane materials, offering promising prospects for advancing membrane-based technologies.

Accessing ladder-shape azetidine-fused indoline pentacycles through intermolecular regiodivergent aza-Paternò-Büchi reactions.

Small molecules with conformationally rigid, three-dimensional geometry are highly desirable in drug development, toward which a direct, simple-to-complexity synthetic logic is still of considerable challenges. Here, we report intermolecular aza-[2 + 2] photocycloaddition (the aza-Paternò-Büchi reaction) of indole that facilely assembles planar building blocks into ladder-shape azetidine-fused indoline pentacycles with contiguous quaternary carbons, divergent head-to-head/head-to-tail regioselectivity, and absolute exo stereoselectivity. These products exhibit marked three-dimensionality, many of which possess 3D score values distributed in the highest 0.5% region with reference to structures from DrugBank database. Mechanistic studies elucidated the origin of the observed regio- and stereoselectivities, which arise from distortion-controlled C-N coupling scenarios. This study expands the synthetic repertoire of energy transfer catalysis for accessing structurally intriguing architectures with high molecular complexity and underexplored topological chemical space.

Covalent organic framework membrane reactor for boosting catalytic performance.

Membrane reactors are known for their efficiency and superior operability compared to traditional batch processes, but their limited diversity poses challenges in meeting various reaction requirements. Herein, we leverage the molecular tunability of covalent organic frameworks (COFs) to broaden their applicability in membrane reactors. Our COF membrane demonstrates an exceptional ability to achieve complete conversion in just 0.63 s at room temperature-a benchmark in efficiency for Knoevenagel condensation. This performance significantly surpasses that of the corresponding homogeneous catalyst and COF powder by factors of 176 and 375 in turnover frequency, respectively. The enhanced concentration of reactants and the rapid removal of generated water within the membrane greatly accelerate the reaction, reducing the apparent activation energy. Consequently, this membrane reactor enables reactions that are unattainable using both COF powders and homogeneous catalysts. Considering the versatility, our findings highlight the substantial promise of COF-based membrane reactors in organic transformations.

Ionic liquids with reversible photo-induced conductivity regulation in aqueous solution.

Stimulus-responsive ionic liquids have gained significant attention for their applications in various areas. Herein, three kinds of azobenzimidazole ionic liquids with reversible photo-induced conductivity regulation were designed and synthesized. The change of electrical conductivity under UV/visible light irradiation in aqueous solution was studied, and the effect of chemical structure and concentration of ionic liquids containing azobenzene to the regulation of photoresponse conductivity were discussed. The results showed that exposing the ionic liquid aqueous solution to ultraviolet light significantly increased its conductivity. Ionic liquids with longer alkyl chains exhibited an even greater increase in conductivity, up to 75.5%. Then under the irradiation of visible light, the electrical conductivity of the solution returned to its initial value. Further exploration of the mechanism of the reversible photo-induced conductivity regulation of azobenzene ionic liquids aqueous solution indicated that this may attributed to the formation/dissociation of ionic liquids aggregates in aqueous solution induced by the isomerization of azobenzene under UV/visible light irradiation and resulted the reversible conductivity regulation. This work provides a way for the molecular designing and performance regulation of photo-responsive ionic liquid and were expected to be applied in devices with photoconductive switching and micro photocontrol properties.

Photoelectric responsive ionic channel for sustainable energy harvesting.

Access to sustainable energy is paramount in today's world, with a significant emphasis on solar and water-based energy sources. Herein, we develop photo-responsive ionic dye-sensitized covalent organic framework membranes. These innovative membranes are designed to significantly enhance selective ion transport by exploiting the intricate interplay between photons, electrons, and ions. The nanofluidic devices engineered in our study showcase exceptional cation conductivity. Additionally, they can adeptly convert light into electrical signals due to photoexcitation-triggered ion movement. Combining the effects of salinity gradients with photo-induced ion movement, the efficiency of these devices is notably amplified. Specifically, under a salinity differential of 0.5/0.01 M NaCl and light exposure, the device reaches a peak power density of 129 W m-2, outperforming the current market standard by approximately 26-fold. Beyond introducing the idea of photoelectric activity in ionic membranes, our research highlights a potential pathway to cater to the escalating global energy needs.

Stable Porous Organic Polymers Used for Reversible Adsorption and Efficient Separation of Trace SO2.

The development of porous solid adsorbents for selective adsorption and separation of SO2 has attracted much attention recently. Herein, we design porous organic polymers (POPs) decorated with pyridine ligands as building units (POP-Py) through a radical polymerization of the 2,5-divinylpyridine (v-Py) monomer. Due to its high BET surface area, nanoporosity, and excellent stability, the prepared POP-Py can be used for reversible adsorption and efficient separation of SO2. The POP-Py possesses a SO2 capacity of 10.8 mmol g-1 at 298 K and 1.0 bar, which can be well retained after 6 recycles, showing an excellent reversible adsorption capacity. The POP-Py also shows superior separation performance for SO2 from a ternary SO2/CO2/N2 mixture (0.17/15/84.83v%), giving a breakthrough time and a saturated SO2 capacity at 178 min g-1 and 0.4 mmol g-1. The retention time was well maintained even under high moisture conditions, confirming its superior water resistance. Furthermore, when other vinyl-functionalized organic ligand monomers (bipyridine, pyrimidine, and pyrazine) were employed for radical polymerization, all of the resultant porous organic ligand polymers (POP-BPy, POP-PyI, and POP-PyA) exhibited superior performance for reversible adsorption and efficient separation of SO2. The combined features of reversible adsorption, efficient separation, and water resistance are important for the industrial applications of these materials as SO2 adsorbents.

Functional Porous Ionic Polymers as Efficient Heterogeneous Catalysts for the Chemical Fixation of CO2 under Mild Conditions.

The development of efficient and metal-free heterogeneous catalysts for the chemical fixation of CO2 into value-added products is still a challenge. Herein, we reported two kinds of polar group (-COOH, -OH)-functionalized porous ionic polymers (PIPs) that were constructed from the corresponding phosphonium salt monomers (v-PBC and v-PBH) using a solvothermal radical polymerization method. The resulting PIPs (POP-PBC and POP-PBH) can be used as efficient bifunctional heterogeneous catalysts in the cycloaddition reaction of CO2 with epoxides under relatively low temperature, ambient pressure, and metal-free conditions without any additives. It was found that the catalytic activities of the POP-PBC and POP-PBH were comparable with the homogeneous catalysts of Me-PBC and PBH and were higher than that of the POP-PPh3-COOH that was synthesized through a post-modification method, indicating the importance of the high concentration catalytic active sites in the heterogeneous catalysts. Reaction under low CO2 concentration conditions showed that the activity of the POP-PBC (with a conversion of 53.8% and a selectivity of 99.0%) was higher than that of the POP-PBH (with a conversion of 32.3% and a selectivity of 99.0%), verifying the promoting effect of the polar group (-COOH group) in the porous framework. The POP-PBC can also be recycled at least five times without a significant loss of catalytic activity, indicating the high stability and robustness of the PIPs-based heterogeneous catalysts.

Different functional groups modified porous organic polymers used for low concentration CO2 fixation.

Through a facile post-synthetic method, different kinds of polar group-functionalized ionic liquid porous organic polymers (POP-PA-COOH, POP-PA-OH, and POP-PA-NH2) were obtained. The materials can be used as efficient heterogeneous catalysts in the cycloaddition reaction of CO2 with epoxides under mild and co-catalyst-free conditions. It is demonstrated that POP-PA-NH2 possesses much higher catalytic activity than POP-PA-OH and POP-PA-COOH. Interestingly, this activity difference can further be amplified when the reaction is carried out under low CO2 concentration, and POP-PA-NH2 possesses a conversion of 84.7% with a selectivity of 99.0% in 96 h. It is noteworthy to mention that research focusing on the transformation of CO2 under low concentration using heterogeneous catalysts is rare and still a challenge. The excellent activities of POP-PA-NH2 under low CO2 concentration make this material a good candidate for CO2 elimination under mild conditions.

Metalated Porous Phenanthroline-Based Polymers as Efficient Heterogeneous Catalysts for Regioselective C-H Activation of Heteroarenes.

Direct C-H bond activation of heterocycles as a step-economical and environmentally friendly approach to build the heterobiaryls motifs is highly attractive, but it still has a challenge to design and prepare a cheap and regioselective heterogeneous catalyst. To tackle this challenge, we have introduced Ni species into a porous phenanthroline-based organic polymer donated as POP-Phen@Ni. This heterogeneous catalyst shows excellent catalytic performances in regioselective C-H activation of heterocycles, even better than those of the corresponding homogenous catalyst. H/D exchange experiments show that the lithium bis(trimethylsilyl)amide (LiHMDS), a base added in the reaction, play a very important role during the reaction processes. We believe that this heterogeneous catalyst would open a new door for design of heterogeneous catalysts to efficiently catalyze the regioselective C-H activation of heterocycles.