RESUMEN
Liquid-liquid phase separation (LLPS) of biopolymers has recently been shown to play a central role in the formation of membraneless organelles with a multitude of biological functions1-3. The interplay between LLPS and macromolecular condensation is part of continuing studies4,5. Synthetic supramolecular polymers are the non-covalent equivalent of macromolecules but they are not reported to undergo LLPS yet. Here we show that continuously growing fibrils, obtained from supramolecular polymerizations of synthetic components, are responsible for phase separation into highly anisotropic aqueous liquid droplets (tactoids) by means of an entropy-driven pathway. The crowding environment, regulated by dextran concentration, affects not only the kinetics of supramolecular polymerizations but also the properties of LLPS, including phase-separation kinetics, morphology, internal order, fluidity and mechanical properties of the final tactoids. In addition, substrate-liquid and liquid-liquid interfaces proved capable of accelerating LLPS of supramolecular polymers, allowing the generation of a myriad of three-dimensional-ordered structures, including highly ordered arrays of micrometre-long tactoids at surfaces. The generality and many possibilities of supramolecular polymerizations to control emerging morphologies are demonstrated with several supramolecular polymers, opening up a new field of matter ranging from highly structured aqueous solutions by means of stabilized LLPS to nanoscopic soft matter.
RESUMEN
Hydrogels have emerged as a promising class of extracellular matrix (ECM)-mimicking materials in regenerative medicine. Here, we briefly describe current state-of-the-art of ECM-mimicking hydrogels, ranging from natural to hybrid to completely synthetic versions, giving the prelude to the importance of supramolecular interactions to make true ECM mimics. The potential of supramolecular interactions to create ECM mimics for cell culture is illustrated through a focus on two different supramolecular hydrogel systems, both developed in our laboratories. We use some recent, significant findings to present important design principles underlying the cell-material interaction. To achieve cell spreading, we propose that slow molecular dynamics (monomer exchange within fibers) is crucial to ensure the robust incorporation of cell adhesion ligands within supramolecular fibers. Slow bulk dynamics (stress-relaxationâfiber rearrangements, τ1/2 ≈ 1000 s) is required to achieve cell spreading in soft gels (<1 kPa), while gel stiffness overrules dynamics in stiffer gels. Importantly, this resonates with the findings of others which specialize in different material types: cell spreading is impaired in case substrate relaxation occurs faster than clutch binding and focal adhesion lifetime. We conclude with discussing considerations and limitations of the supramolecular approach as well as provide a forward thinking perspective to further understand supramolecular hydrogel-cell interactions. Future work may utilize the presented guidelines underlying cell-material interactions to not only arrive at the next generation of ECM-mimicking hydrogels but also advance other fields, such as bioelectronics, opening up new opportunities for innovative applications.
Asunto(s)
Matriz Extracelular , Hidrogeles , Matriz Extracelular/química , Hidrogeles/química , Humanos , Adhesión Celular , Materiales Biomiméticos/químicaRESUMEN
Developing peptide-based materials with controlled morphology is a critical theme of soft matter research. Herein, we report the formation of a novel, patterned cross-ß structure formed by self-assembled C3 -symmetric peptide amphiphiles based on diphenylalanine and benzene-1,3,5-tricarboxamide (BTA). The cross-ß motif is an abundant structural element in amyloid fibrils and aggregates of fibril-forming peptides, including diphenylalanine. The incorporation of topological constraints on one edge of the diphenylalanine fragment limits the number of ß-strands in ß-sheets and leads to the creation of an unconventional offset-patterned cross-ß structure consisting of short 3×2 parallel ß-sheets stabilized by phenylalanine zippers. In the reported assembly, two patterned cross-ß structures bind parallel arrays of BTA stacks in a superstructure within a single-molecule-thick nanoribbon. In addition to a threefold network of hydrogen bonds in the BTA stack, each molecule becomes simultaneously bound by hydrogen bonds from three ß-sheets and four phenylalanine zippers. The diffuse layer of alkyl chains with terminal polar groups prevents the nanoribbons from merging and stabilizes cross-ß-structure in water. Our results provide a simple approach to the incorporation of novel patterned cross-ß motifs into supramolecular superstructures and shed light on the general mechanism of ß-sheet formation in C3 -symmetric peptide amphiphiles.
Asunto(s)
Amiloide , Péptidos , Estructura Secundaria de Proteína , Péptidos/química , Amiloide/química , Conformación Proteica en Lámina beta , FenilalaninaRESUMEN
Water-soluble supramolecular polymers show great potential to develop dynamic biomaterials with tailored properties. Here, we elucidate the morphology, stability and dynamicity of supramolecular polymers derived from bisurea-based monomers. An accessible synthetic approach from 2,4-toluene diisocyanate (TDI) as the starting material is developed. TDI has two isocyanates that differ in intrinsic reactivity, which allows to obtain functional, desymmetrized monomers in a one-step procedure. We explore how the hydrophobic/hydrophilic ratio affects the properties of the formed supramolecular polymers by increasing the number of methylene units from 10 to 12 keeping the hydrophilic hexa(ethylene glycol) constant. All bisurea-based monomers form long, fibrous structures with 3-5 monomers in the cross-section in water, indicating a proper hydrophobic\hydrophilic balance. The stability of the supramolecular polymers increases with an increasing amount of methylene units, whereas the dynamic nature of the monomers decreases. The introduction of one Cy3 dye affords modified supramolecular monomers, which co-assemble with the unmodified monomers into fibrous structures. All systems show excellent water-compatibility and no toxicity for different cell-lines. Importantly, in cell culture media, the fibrous structures remain present, highlighting the stability of these supramolecular polymers in physiological conditions. The results obtained here motivate further investigation of these bisurea-based building blocks as dynamic biomaterial.
Asunto(s)
Materiales Biocompatibles , Polímeros , Polímeros/química , Materiales Biocompatibles/química , Línea Celular , Agua/químicaRESUMEN
Synthetic supramolecular polymers and hydrogels in water are emerging as promising biomaterials due to their modularity and intrinsic dynamics. Here, we introduce temperature sensitivity into the nonfunctionalized benzene-1,3,5-tricarboxamide (BTA-EG4) supramolecular system by incorporating a poly(N-isopropylacrylamide)-functionalized (BTA-PNIPAM) moiety, enabling 3D cell encapsulation applications. The viscous and structural properties in the solution state as well as the mechanical and dynamic features in the gel state of BTA-PNIPAM/BTA-EG4 mixtures were investigated and modulated. In the dilute state (c â¼µM), BTA-PNIPAM acted as a chain capper below the cloud point temperature (Tcp = 24 °C) but served as a cross-linker above Tcp. At higher concentrations (c â¼mM), weak or stiff hydrogels were obtained, depending on the BTA-PNIPAM/BTA-EG4 ratio. The mixture with the highest BTA-PNIPAM ratio was â¼100 times stiffer and â¼10 times less dynamic than BTA-EG4 hydrogel. Facile cell encapsulation in 3D was realized by leveraging the temperature-sensitive sol-gel transition, opening opportunities for utilizing this hydrogel as an extracellular matrix mimic.
Asunto(s)
Resinas Acrílicas , Hidrogeles , Temperatura , Hidrogeles/química , Resinas Acrílicas/química , Materiales Biocompatibles/química , Animales , Ratones , BenzamidasRESUMEN
A polymer microarray based on the supramolecular ureido-pyrimidinone (UPy) moiety is fabricated to screen antimicrobial materials for their ability to support cell adhesion. UPy-functionalized additives, either cell-adhesive, antimicrobial or control peptides, are used, and investigated in different combinations at different concentrations, resulting in a library of 194 spots. These are characterized on composition and morphology to evaluate the microarray fabrication. Normal human dermal fibroblasts are cultured on the microarrays and cell adhesion to the spots is systematically analyzed. Results demonstrate enhanced cell adhesion on spots with combinations including the antimicrobial peptides. This study clearly proves the power of the high throughput approach in combination with supramolecular molecules, to screen additive libraries for desired biological response.
RESUMEN
Two synthetic supramolecular hydrogels, formed from bis-urea amphiphiles containing lactobionic acid (LBA) and maltobionic acid (MBA) bioactive ligands, are applied as cell culture matrices in vitro. Their fibrillary and dynamic nature mimics essential features of the extracellular matrix (ECM). The carbohydrate amphiphiles self-assemble into long supramolecular fibers in water, and hydrogels are formed by physical entanglement of fibers through bundling. Gels of both amphiphiles exhibit good self-healing behavior, but remarkably different stiffnesses. They display excellent bioactive properties in hepatic cell cultures. Both carbohydrate ligands used are proposed to bind to asialoglycoprotein receptors (ASGPRs) in hepatic cells, thus inducing spheroid formation when seeding hepatic HepG2 cells on both supramolecular hydrogels. Ligand nature, ligand density, and hydrogel stiffness influence cell migration and spheroid size and number. The results illustrate the potential of self-assembled, carbohydrate-functionalized hydrogels as matrices for liver tissue engineering.
Asunto(s)
Matriz Extracelular , Hidrogeles , Ligandos , Hidrogeles/metabolismo , Matriz Extracelular/metabolismo , Carbohidratos , HígadoRESUMEN
Antimicrobial peptides (AMPs) can kill bacteria by disrupting their cytoplasmic membrane, which reduces the tendency of antibacterial resistance compared to conventional antibiotics. Their possible toxicity to human cells, however, limits their applicability. The combination of magnetically controlled drug delivery and supramolecular engineering can help to reduce the dosage of AMPs, control the delivery, and improve their cytocompatibility. Lasioglossin III (LL) is a natural AMP form bee venom that is highly antimicrobial. Here, superparamagnetic iron oxide nanoparticles (IONs) with a supramolecular ureido-pyrimidinone (UPy) coating were investigated as a drug carrier for LL for a controlled delivery to a specific target. Binding to IONs can improve the antimicrobial activity of the peptide. Different transmission electron microscopy (TEM) techniques showed that the particles have a crystalline iron oxide core with a UPy shell and UPy fibers. Cytocompatibility and internalization experiments were carried out with two different cell types, phagocytic and nonphagocytic cells. The drug carrier system showed good cytocompatibility (>70%) with human kidney cells (HK-2) and concentration-dependent toxicity to macrophagic cells (THP-1). The particles were internalized by both cell types, giving them the potential for effective delivery of AMPs into mammalian cells. By self-assembly, the UPy-coated nanoparticles can bind UPy-functionalized LL (UPy-LL) highly efficiently (99%), leading to a drug loading of 0.68 g g-1. The binding of UPy-LL on the supramolecular nanoparticle system increased its antimicrobial activity against E. coli (MIC 3.53 µM to 1.77 µM) and improved its cytocompatible dosage for HK-2 cells from 5.40 µM to 10.6 µM. The system showed higher cytotoxicity (5.4 µM) to the macrophages. The high drug loading, efficient binding, enhanced antimicrobial behavior, and reduced cytotoxicity makes ION@UPy-NH2 an interesting drug carrier for AMPs. The combination with superparamagnetic IONs allows potential magnetically controlled drug delivery and reduced drug amount of the system to address intracellular infections or improve cancer treatment.
Asunto(s)
Antiinfecciosos , Péptidos Antimicrobianos , Animales , Humanos , Pirimidinonas/química , Escherichia coli , Portadores de Fármacos , Antiinfecciosos/farmacología , Nanopartículas Magnéticas de Óxido de Hierro , Iones , MamíferosRESUMEN
Much effort has been made in the development of biomaterials that synthetically mimic the dynamics of the natural extracellular matrix in tissues. Most of these biomaterials specifically interact with cells, but lack the ability to adapt and truly communicate with the cellular environment. Communication between biomaterials and cells is achieved by the development of various materials with enzyme-responsive moieties in order to respond to cellular cues. In this perspective, we discuss different enzyme-responsive systems, from surfaces to supramolecular assemblies. Additionally, we highlight their further prospects in order to create, inspired by nature, fully autonomous adaptive biomaterials that display dynamic reciprocal behavior. This Perspective shows new strategies for the development of biomaterials that may find broad utility in regenerative medicine applications, from scaffolds for tissue engineering to systems for controlled drug delivery.
Asunto(s)
Materiales Biocompatibles , Medicina Regenerativa , Matriz Extracelular , Ingeniería de TejidosRESUMEN
Structurally and functionally well-defined recombinant proteins are an interesting class of sequence-controlled macromolecules to which different crosslinking chemistries can be applied to tune their biological properties. Herein, we take advantage of a 571-residue recombinant peptide based on human collagen type I (RCPhC1), which we functionalized with supramolecular 4-fold hydrogen bonding ureido-pyrimidinone (UPy) moieties. By grafting supramolecular UPy moieties onto the backbone of RCPhC1 (UPy-RCPhC1), increased control over the polymer structure, assembly, gelation, and mechanical properties was achieved. In addition, by increasing the degree of UPy functionalization on RCPhC1, cardiomyocyte progenitor cells were cultured on "soft" (â¼26 kPa) versus "stiff" (â¼68-190 kPa) UPy-RCPhC1 hydrogels. Interestingly, increased stress fiber formation, focal adhesions, and proliferation were observed on stiffer compared to softer substrates, owing to the formation of stronger cell-material interactions. In conclusion, a bioinspired hydrogel material was designed by a combination of two well-known natural components, i.e., a protein as sequence-controlled polymer and UPy units inspired on nucleobases.
Asunto(s)
Proliferación Celular/efectos de los fármacos , Colágeno Tipo I , Miocitos Cardíacos/metabolismo , Células Madre/metabolismo , Animales , Materiales Biomiméticos/síntesis química , Materiales Biomiméticos/química , Materiales Biomiméticos/farmacología , Línea Celular Transformada , Colágeno Tipo I/química , Colágeno Tipo I/farmacología , Humanos , Ratones , Miocitos Cardíacos/citología , Células Madre/citologíaRESUMEN
High concentrations of supplemented growth factors can cause oversaturation and adverse effects in in vitro and in vivo studies, though these supraphysiological concentrations are often required due to the low stability of growth factors. Here we demonstrate the stabilization of TGF-ß1 and BMP4 using supramolecular polymers. Inspired by heparan sulfate, sulfonated peptides were presented on a supramolecular polymer to allow for noncovalent binding to growth factors in solution. After mixing with excipient molecules, both TGF-ß1 and BMP4 were shown to have a prolonged half-life compared to the growth factors free in solution. Moreover, high cellular response was measured by a luciferase assay, indicating that TGF-ß1 remained highly active upon binding to the supramolecular assembly. The results demonstrate that significant lower concentrations of growth factors can be used when supramolecular polymers bearing growth factor binding moieties are implemented. This approach can also be exploited in hydrogel systems to control growth factor release.
Asunto(s)
Proteína Morfogenética Ósea 4/química , Polímeros/química , Factor de Crecimiento Transformador beta/química , Proteína Morfogenética Ósea 4/metabolismo , Línea Celular Tumoral , Humanos , Unión Proteica , Estabilidad Proteica , Pirimidinonas/química , Factor de Crecimiento Transformador beta/metabolismoRESUMEN
Treatment of cancer in the peritoneal cavity may be improved with macroscale drug delivery systems that offer control over intraperitoneal concentration of chemotherapeutic agents. Currently, suitable drug carriers to facilitate a sustained release of small hydrophilic drugs such as mitomycin C are lacking. For this purpose, a pH-responsive supramolecular hydrogel based on ureido-pyrimidinone (UPy) chemistry is utilized here. In order to provide a sustained release profile, a lipophilicity-increasing cholesterol conjugation strategy is proposed that enhances affinity between the modified drug (mitomycin-PEG24 -cholesterol, MPC) and the hydrophobic compartments in the UPy gel. Additional advantages of cholesterol conjugation include improved chemical stability and potency of mitomycin C. In vitro the tunability of the system to obtain optimal effective concentrations over time is demonstrated with a combinatorial treatment of mitomycin C and MPC in one UPy hydrogel delivery system.
Asunto(s)
Antibióticos Antineoplásicos/farmacología , Colesterol/farmacología , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Mitomicina/farmacología , Pirimidinonas/química , Urea/química , Antibióticos Antineoplásicos/química , Muerte Celular/efectos de los fármacos , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Colesterol/química , Relación Dosis-Respuesta a Droga , Ensayos de Selección de Medicamentos Antitumorales , Humanos , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Sustancias Macromoleculares/química , Mitomicina/química , Estructura Molecular , Polietilenglicoles/química , Polietilenglicoles/farmacología , Relación Estructura-Actividad , Urea/análogos & derivadosRESUMEN
The most striking and general property of the biological fibrous architectures in the extracellular matrix (ECM) is the strong and directional interaction between biologically active protein subunits. These fibers display rich dynamic behavior without losing their architectural integrity. The complexity of the ECM taking care of many essential properties has inspired synthetic chemists to mimic these properties in artificial one-dimensional fibrous structures with the aim to arrive at multi-component biomaterials. Due to the dynamic character required for interaction with natural tissue, supramolecular biomaterials are promising candidates for regenerative medicine. Depending on the application area, and thereby the design criteria of these multi-component fibrous biomaterials, they are used as elastomeric materials or hydrogel systems. Elastomeric materials are designed to have load bearing properties whereas hydrogels are proposed to support in vitro cell culture. Although the chemical structures and systems designed and studied today are rather simple compared to the complexity of the ECM, the first examples of these functional supramolecular biomaterials reaching the clinic have been reported. The basic concept of many of these supramolecular biomaterials is based on their ability to adapt to cell behavior as a result of dynamic non-covalent interactions. In this review, we show the translation of one-dimensional supramolecular polymers into multi-component functional biomaterials for regenerative medicine applications.
Asunto(s)
Materiales Biocompatibles/síntesis química , Polímeros/química , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Investigación Biomédica , Matriz Extracelular/metabolismo , Humanos , Sustancias Macromoleculares/química , Sustancias Macromoleculares/metabolismo , Polímeros/metabolismoRESUMEN
Fouling properties of new biomaterials are important for the performance of a material in a biological environment. Here, a set of three supramolecular polymeric additives consisting of ureidopyrimidinone (UPy)-functionalized poly(ethylene glycol) (UPyPEG) were formulated with UPy-modified polycaprolactone into thin supramolecular material films. The antifouling properties of these material films were determined by investigation of the relation of cell adhesion and protein adsorption on these materials films. The presence of the UPyPEG additives at the surface of the films was evident by an increased hydrophilicity. Adhesion of human epithelial and endothelial cells was strongly reduced for two of the UPyPEG-containing films. Analysis of adsorption of the first three proteins from the Vroman series, albumin, γ-globulin, and fibrinogen, using quartz crystal microbalance with dissipation in combination with viscoelastic modeling, revealed that the surfaces containing the UPyPEG additives had a limited effect on adsorption of these proteins. Despite a limited reduction of protein adsorption, UPyPEG-containing mixtures were non-cell-adhesive, which shows that non-cell-adhesive properties of supramolecular polymer surfaces are not always directly correlated to protein adsorption.
RESUMEN
Hydrogels were prepared with physical cross-links comprising 2-ureido-4[1H]-pyrimidinone (UPy) hydrogen-bonding units within the backbone of segmented amphiphilic macromolecules having hydrophilic poly(ethylene glycol) (PEG). The bulk materials adopt nanoscopic physical cross-links composed of UPy-UPy dimers embedded in segregated hydrophobic domains dispersed within the PEG matrix as comfirmed by cryo-electron microscopy. The amphiphilic network was swollen with high weight fractions of water (w(H2O) ≈ 0.8) owing to the high PEG weight fraction within the pristine polymers (w(PEG) ≈ 0.9). Two different PEG chain lengths were investigated and illustrate the corresponding consequences of cross-link density on mechanical properties. The resulting hydrogels exhibited high strength and resilience upon deformation, consistent with a microphase separated network, in which the UPy-UPy interactions were adequately shielded within hydrophobic nanoscale pockets that maintain the network despite extensive water content. The cumulative result is a series of tough hydrogels with tunable mechanical properties and tractable synthetic preparation and processing. Furthermore, the melting transition of PEG in the dry polymer was shown to be an effective stimulus for shape memory behavior.
Asunto(s)
Hidrogeles/química , Polietilenglicoles/química , Pirimidinonas/química , Reactivos de Enlaces Cruzados/química , Microscopía por Crioelectrón , Dimerización , Enlace de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Fenómenos Mecánicos , Agua/químicaRESUMEN
Post-assembly functionalization of supramolecular nanostructures has the potential to expand the range of their applications. We report here the use of the chemoselective native chemical ligation (NCL) reaction to functionalize self-assembled peptide amphiphile (PA) nanofibers. This strategy can be used to incorporate specific bioactivity on the nanofibers, and as a model, we demonstrate functionalization with the RGDS peptide following self-assembly. Incorporation of bioactivity is verified by the observation of characteristic changes in fibroblast morphology following NCL-mediated attachment of the signal to PA nanofibers. The NCL reaction does not alter the PA nanofiber morphology, and biotinylated RGDS peptide was found to be accessible on the nanofiber surface after ligation for binding with streptavidin-conjugated gold nanoparticles. In order to show that this strategy is not limited to short peptides, we utilized NCL to conjugate yellow fluorescent protein and/or cyan fluorescent protein to self-assembled PA nanofibers. Förster resonance energy transfer and fluorescence anisotropy measurements are consistent with the immobilization of the protein on the PA nanofibers. The change in electrophoretic mobility of the protein upon conjugation with PA molecules confirmed the formation of a covalent linkage. NCL-mediated attachment of bioactive peptides and proteins to self-assembled PA nanofibers allows the independent control of self-assembly and bioactivity while retaining the biodegradable peptide structure of the PA molecule and thus can be useful in tailoring design of biomaterials.
Asunto(s)
Proteínas Luminiscentes/química , Proteínas Luminiscentes/metabolismo , Nanoestructuras/química , Péptidos/química , Péptidos/metabolismo , Animales , Supervivencia Celular , Células Cultivadas , Fibroblastos/citología , Sustancias Macromoleculares/síntesis química , Sustancias Macromoleculares/química , Sustancias Macromoleculares/metabolismo , Ratones , Modelos Moleculares , Estructura Molecular , Células 3T3 NIH , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Hydrogels and, in particular, supramolecular hydrogels show promising properties for application in regenerative medicine because of their ability to adapt to the natural environment these materials are brought into. However, only few studies focus on the structure-property relationships in supramolecular hydrogels. Here, we study in detail both the structure and the mechanical properties of such a network, composed of poly(ethylene glycol), end-functionalized with ureido-pyrimidinone fourfold hydrogen bonding units. This network is responsive to triggers such as concentration, temperature and pH. To obtain more insight into the sol-gel transition of the system, both rheology and small-angle X-ray scattering (SAXS) are used. We show that the sol-gel transitions based on these three triggers, as measured by rheology, coincide with the appearance of a structural feature in SAXS. We attribute this feature to the presence of hydrophobic domains where cross-links are formed. These results provide more insight into the mechanism of network formation in these materials, which can be exploited for tailoring their behavior for biomedical applications, where one of the triggers discussed might be used.
Asunto(s)
Hidrogeles/química , Reología , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Enlace de Hidrógeno , Polietilenglicoles/química , Pirimidinonas/químicaRESUMEN
Small bioactive peptide sequences derived from extracellular matrix proteins possess the ability to interact with cell receptors. As such, these peptide additives are excellent mimics to develop materials for 3D cell culture. Two types of supramolecular modified collagen type I mimicking peptide additives are presented; UPy-GFOGER (39 amino acids), with a novel superstructure, and the more simplistic UPy-DGEA (7 amino acids). Here, we studied the impact of the conformational differences between both peptide additives, on their biological performance. Various analyzing techniques demonstrated the ability of the supramolecular UPy-GFOGER to self-assemble into short nanofibers with brush-like outer features, suggesting trimerization into a triple helix. UPy-DGEA is a short additive without a complex structure. Since, collagen type I is a major component of the human corneal stroma, primary keratocytes (PKs) are encapsulated within the functionalized hydrogels to provide insights in the induced bioactivity of both additives. Incorporation of UPy-GFOGER supported an elongated morphology and (re-)differentiation of the encapsulated PKs, while tiny round-shaped cells were observed within the hydrogels functionalized with UPy-DGEA. This difference in biological success between UPy-GFOGER and UPy-DGEA indicates the difficulty of using short peptide additives without a complex structure to mimic the complex structure of natural collagen.
RESUMEN
Low molecular weight gels are formed via the self-assembly of small molecules into fibrous structures. In the case of hydrogels, these networks entrap large volumes of water, yielding soft materials. Such gels tend to have weak mechanical properties and a high permeability for cells, making them particularly appealing for regenerative medicine applications. Ureido-pyrimidinone (UPy) supramolecular gelators are self-assembling systems that have demonstrated excellent capabilities as biomaterials. Here, we combine UPy-gelators with another low molecular weight gelator, the functionalized dipeptide 2NapFF. We have successfully characterized these multicomponent systems on a molecular and bulk scale. The addition of 2NapFF to a crosslinked UPy hydrogel significantly increased hydrogel stiffness from 30 Pa to 1300 Pa. Small-angle X-ray scattering was used to probe the underlying structures of the systems and showed that the mixed UPy and 2NapFF systems resemble the scattering data produced by the pristine UPy systems. However, when a bifunctional UPy-crosslinker was added, the scattering was close to that of the 2NapFF only samples. The results suggest that the crosslinker significantly influences the assembly of the low molecular weight gelators. Finally, we analysed the biocompatibility of the systems using fibroblast cells and found that the cells tended to spread more effectively when the crosslinking species was incorporated. Our results emphasise the need for thorough characterisation at multiple length scales to finely control material properties, which is particularly important for developing novel biomaterials.
RESUMEN
The extracellular matrix (ECM) has evolved around complex covalent and non-covalent interactions to create impressive function-from cellular signaling to constant remodeling. A major challenge in the biomedical field is the de novo design and control of synthetic ECMs for applications ranging from tissue engineering to neuromodulation to bioelectronics. As we move towards recreating the ECM's complexity in hydrogels, the field has taken several approaches to recapitulate the main important features of the native ECM (i.e. mechanical, bioactive and dynamic properties). In this review, we first describe the wide variety of hydrogel systems that are currently used, ranging from fully natural to completely synthetic to hybrid versions, highlighting the advantages and limitations of each class. Then, we shift towards supramolecular hydrogels that show great potential for their use as ECM mimics due to their biomimetic hierarchical structure, inherent (controllable) dynamic properties and their modular design, allowing for precise control over their mechanical and biochemical properties. In order to make the next step in the complexity of synthetic ECM-mimetic hydrogels, we must leverage the supramolecular self-assembly seen in the native ECM; we therefore propose to use supramolecular monomers to create larger, hierarchical, co-assembled hydrogels with complex and synergistic mechanical, bioactive and dynamic features.