D4-Symmetric Dirhodium Tetrakis(binaphthylphosphate) Catalysts for Enantioselective Functionalization of Unactivated C-H Bonds.

Dirhodium tetrakis(2,2'-binaphthylphosphate) catalysts were successfully developed for asymmetric C-H functionalization with trichloroethyl aryldiazoacetates as the carbene precursors. The 2,2'-binaphthylphosphate (BNP) ligands were modified by introduction of aryl and/or chloro functionality at the 4,4',6,6' positions. As the BNP ligands are C2-symmetric, the resulting dirhodium tetrakis(2,2'-binaphthylphosphate) complexes were expected to be D4-symmetric, but X-ray crystallographic and computational studies revealed this is not always the case because of internal T-shaped CH-π and aryl-aryl interactions between the ligands. The optimum catalyst is Rh2(S-megaBNP)4, with 3,5-di(tert-butyl)phenyl substituents at the 4,4' positions and chloro substituents at the 6,6' positions. This catalyst adopts a D4-symmetric arrangement and is ideally suited for site-selective C-H functionalization at unactivated tertiary sites with high levels of enantioselectivity, outperforming the best dirhodium tetracarboxylate catalyst developed for this reaction. The standard reactions were conducted with a catalyst loading of 1 mol % but lower catalyst loadings can be used if desired, as illustrated in the C-H functionalization of cyclohexane in 91% ee with 0.0025 mol % catalyst loading (29,400 turnover numbers). These studies further illustrate the effectiveness of donor/acceptor carbenes in site-selective intermolecular C-H functionalization and expand the toolbox of catalysts available for catalyst-controlled C-H functionalization.

Heterogeneous Fe-N-C Catalyst for Aerobic Dehydrogenation of Hydrazones to Diazo Compounds Used for Carbene Transfer.

Organic diazo compounds are versatile reagents in chemical synthesis and would benefit from improved synthetic accessibility, especially for larger scale applications. Here, we report a mild method for the synthesis of diazo compounds from hydrazones using a heterogeneous Fe-N-C catalyst, which has Fe ions dispersed within a graphitic nitrogen-doped carbon support. The reactions proceed readily at room temperature using O2 (1 atm) as the oxidant. Aryl diazoesters, ketones, and amides are accessible, in addition to less stable diaryl diazo compounds. Initial-rate data show that the Fe-N-C catalyst achieves faster rates than a heterogeneous Pt/C catalyst. The oxidative dehydrogenation of hydrazones may be performed in tandem with Rh-catalyzed enantioselective C-H insertion and cyclopropanation of alkenes, without requiring isolation of the diazo intermediate. This sequence is showcased by using a flow reactor for continuous synthesis of diazo compounds.

Diaryldiazoketones as Effective Carbene Sources for Highly Selective Rh(II)-Catalyzed Intermolecular C-H Functionalization.

A novel donor/acceptor carbene intermediate has been developed using diaryldiazoketones as carbene precursors. In the presence of the chiral dirhodium catalyst, Rh2(S-TPPTTL)4, diaryldiazoketones undergo highly regio-, stereo-, and diastereoselective C-H functionalization of activated and unactivated secondary and tertiary C-H bonds. Computational studies revealed that the arylketo group behaves differently than the carboxylate acceptor group because the orientation of the arylketo group predetermines which face of the carbene will be attacked.

Anhydrous and Stereoretentive Fluoride-Enhanced Suzuki-Miyaura Coupling of Immunomodulatory Imide Drug Derivatives.

Immunomodulatory imide drugs form the core of many pharmaceutically relevant structures, but Csp2-Csp2 bond formation via metal-catalyzed cross coupling is difficult due to the sensitivity of the glutarimide ring ubiquitous in these structures. We report that replacement of the traditional alkali base with a fluoride source enhances a previously challenging Suzuki-Miyaura coupling on glutarimide-containing compounds with trifluoroborates. These enabling conditions are reactive enough to generate these derivatives in high yields but mild enough to preserve both the glutarimide and its sensitive stereocenter. Experimental and computational data suggest a mechanistically distinct process of π-coordination of the trifluoroborate enabled by these conditions.

Editor's Choice - Bypass versus Angioplasty for Severe Ischaemia of the Leg (BASIL) Prospective Cohort Study and the Generalisability of the BASIL-2 Randomised Controlled Trial.

OBJECTIVE: The Bypass versus Angioplasty in Severe Ischaemia of the Leg-2 (BASIL-2) randomised controlled trial has shown that, for patients with chronic limb threatening ischaemia (CLTI) who require an infrapopliteal (IP) revascularisation a vein bypass (VB) first revascularisation strategy led to a 35% increased risk of major amputation or death when compared with a best endovascular treatment (BET) first revascularisation strategy. The study aims are to place the BASIL-2 trial within the context of the CLTI patient population as a whole and to investigate the generalisability of the BASIL-2 outcome data. METHODS: This was an observational, single centre prospective cohort study. Between 24 June 2014 and 31 July 2018, the BASIL Prospective Cohort Study (PCS) was performed which used BASIL-2 trial case record forms to document the characteristics, initial and subsequent management, and outcomes of 471 consecutive CLTI patients admitted to an academic vascular centre. Ethical approval was obtained, and all patients provided fully informed written consent. Follow up data were censored on 14 December 2022. RESULTS: Of the 238 patients who required an infrainguinal revascularisation, 75 (32%) had either IP bypass (39 patients) or IP BET (36 patients) outside BASIL-2. Seventeen patients were initially randomised to BASIL-2. A further three patients who did not have an IP revascularisation as their initial management were later randomised in BASIL-2. Therefore, 95/471 (20%) of patients had IP revascularisation (16% outside, 4% inside BASIL-2). Differences in amputation free survival, overall survival, and limb salvage between IP bypass and IP BET performed outside BASIL-2 were not subject to hypothesis testing due to the small sample size. Reasons for non-randomisation into the trial were numerous, but often due to anatomical and technical considerations. CONCLUSION: CLTI patients who required an IP revascularisation procedure and were subsequently randomised into BASIL-2 accounted for a small subset of the CLTI population as a whole. For a wide range of patient, limb, anatomical and operational reasons, most patients in this cohort were deemed unsuitable for randomisation in BASIL-2. The results of BASIL-2 should be interpreted in this context.

Desymmetrization of cyclohexanes by site- and stereoselective C-H functionalization.

Carbon-hydrogen (C-H) bonds have long been considered unreactive and are inert to traditional chemical reagents, yet new methods for the transformation of these bonds are continually being developed1-9. However, it is challenging to achieve such transformations in a highly selective manner, especially if the C-H bonds are unactivated10 or not adjacent to a directing group11-13. Catalyst-controlled site-selectivity-in which the inherent reactivities of the substrates14 can be overcome by choosing an appropriate catalyst-is an appealing concept, and substantial effort has been made towards catalyst-controlled C-H functionalization6,15-17, in particular methylene C-H bond functionalization. However, although several new methods have targeted these bonds in cyclic alkanes, the selectivity has been relatively poor18-20. Here we illustrate an additional level of sophistication in catalyst-controlled C-H functionalization, whereby unactivated cyclohexane derivatives can be desymmetrized in a highly site- and stereoselective manner through donor/acceptor carbene insertion. These studies demonstrate the potential of catalyst-controlled site-selectivity to govern which C-H bond will react, which could enable new strategies for the production of fine chemicals.

Thoracic Society of Australia and New Zealand clinical practice guideline on adult home oxygen therapy.

This Thoracic Society of Australia and New Zealand Guideline on the provision of home oxygen therapy in adults updates a previous Guideline from 2015. The Guideline is based upon a systematic review and meta-analysis of literature to September 2022 and the strength of recommendations is based on GRADE methodology. Long-term oxygen therapy (LTOT) is recommended for its mortality benefit for patients with COPD and other chronic respiratory diseases who have consistent evidence of significant hypoxaemia at rest (PaO2 ≤ 55 mm Hg or PaO2 ≤59 mm Hg in the presence of hypoxaemic sequalae) while in a stable state. Evidence does not support the use of LTOT for patients with COPD who have moderate hypoxaemia or isolated nocturnal hypoxaemia. In the absence of hypoxaemia, there is no evidence that oxygen provides greater palliation of breathlessness than air. Evidence does not support the use of supplemental oxygen therapy during pulmonary rehabilitation in those with COPD and exertional desaturation but normal resting arterial blood gases. Both positive and negative effects of LTOT have been described, including on quality of life. Education about how and when to use oxygen therapy in order to maximize its benefits, including the use of different delivery devices, expectations and limitations of therapy and information about hazards and risks associated with its use are key when embarking upon this treatment.

Predictive ability of the pedal medial arterial calcification (pMAC) score for major adverse limb events among patients with Chronic Limb-Threatening Ischemia.

OBJECTIVE: Pedal medial arterial calcification (pMAC) is a potential predictor of major adverse limb events (MALE) among patients with critical limb-threatening ischemia (CLTI). This study aims to validate the prognostic value of the pMAC score in predicting major lower limb amputation (MLLA) and need for re-do revascularisation. METHODS: A single centre study involving 196 patients diagnosed with CLTI, reviewed between 2012 and 2022. Patients' pMAC scores were obtained through X-ray assessments. Correlations between pMAC scores and the incidence of MALE and re-do revascularisation, were analysed. A power analysis using G* Power 3 software determined a needed sample size of 157 participants. Statistical analysis employed SPSS 26, utilising descriptive statistics, Chi Square, Mann-Whitney, Kaplan-Meier with log-rank test, and Cox regression for predictor identification. RESULTS: The cohort was predominantly male (79.1%) and diabetic (59.2%). Re-do revascularisation need was 15.3%, increasing with pMAC scores: 3.3% (low), 24.5% (medium), and 50% (high) (p<0.001). MLLA frequency also rose with pMAC scores: 6.7%, 27.5%, and 50% respectively (p<0.001). Higher pMAC scores correlated with a higher incidence of MALE (p=0.029). Multivariate analysis showed medium pMAC (HR 4.159, p=0.002), high pMAC (HR 7.366, p=0.015), and GLASS stage 3 (HR 3.529, p=0.011) as independent MLLA predictors. Re-do revascularisation predictors included female sex (HR 2.106, p=0.063), Black race (HR 64.498, p=0.001), medium pMAC (HR 6.812, p=0.002), high pMAC (HR 11.455, p=0.008), and GLASS stage 3 (HR 2.899, p=0.037). CONCLUSION: The pMAC score effectively predicts MALE in CLTI patients and enhances risk stratification. Using both, pMAC scores and GLASS stages enhances predictive accuracy, identifying patients at higher risk for MLLA, Informing clinical decision-making and therapeutic strategies.

Evaluation of the Global Limb Anatomic Staging System in patients with chronic limb-threatening ischemia undergoing endovascular intervention for femoropopliteal disease.

BACKGROUND: The Global Limb Anatomic Staging System (GLASS) is a new method of quantifying the anatomic severity of infrainguinal disease in patients with chronic limb-threatening ischemia. However, because GLASS has undergone limited validation, its value as an aid to shared decision-making regarding the choice of revascularization strategy remains incompletely defined. Here we report the relationship between GLASS and outcomes in a contemporary series comprising all 309 patients who underwent an attempt at femoropopliteal and/or infrapopiteal endovascular therapy for chronic limb-threatening ischemia in our unit between 2009 and 2014. METHODS: Baseline patient characteristics and outcome data including immediate technical success (ITS), amputation-free survival (AFS), overall survival, limb salvage, freedom from reintervention (FF-R), and freedom from major adverse limb events (FF-MALE) were obtained from hospital databases. GLASS grades and stage were obtained from pre-endovascular therapy angiographic imaging. Outcome data were censored on May 31, 2017. RESULTS: Baseline patient characteristics were similar across different GLASS femoropopliteal and IP grades and overall limb stages. Worsening GLASS stage was associated with a significant reduction in ITS (97.5% vs 91.5% vs 84.0%; P = .029). At 72 months FF-R (hazard ratio, 2.00; 95% confidence interval, 1.11-3.57; P = .020) and FF-MALE (hazard ratio, 1.76, 95% confidence interval, 1.10-2.81; P = .019) were significant worse in GLASS stage 3 than in stage 2 limbs. CONCLUSIONS: In our study, there were significant differences in ITS, FF-R and FF-MALE between limbs with GLASS stage 2 and 3 disease. However, further GLASS refinement seems likely to be required if its usefulness in everyday clinical practice as an aid to shared decision-making regarding the choice of revascularization strategy is to be maximized.

Dirhodium C-H Functionalization of Hole-Transport Materials.

Hole-transport materials (HTMs) based on triarylamine derivatives play important roles in organic electronics applications including organic light-emitting diodes and perovskite solar cells. For some applications, triarylamine derivatives bearing appropriate binding groups have been used to functionalize surfaces, while others have been incorporated as side chains into polymers to manipulate the processibility of HTMs for device applications. However, only a few approaches have been used to incorporate a single surface-binding group or polymerizable group into triarylamine materials. Here, we report that Rh-carbenoid chemistry can be used to insert carboxylic esters and norbornene functional groups into sp2 C-H bonds of a simple triarylamine and a 4,4'-bis(diarylamino)biphenyl, respectively. The norbenene-functionalized monomer was polymerized by ring-opening metathesis; the electrochemical, optical, and charge-transport properties of these materials were similar to those of related materials synthesized by conventional means. This method potentially offers straightforward access to a diverse range of HTMs with different functional groups.

Site-selective and stereoselective functionalization of non-activated tertiary C-H bonds.

The synthesis of complex organic compounds usually relies on controlling the reactions of the functional groups. In recent years, it has become possible to carry out reactions directly on the C-H bonds, previously considered to be unreactive. One of the major challenges is to control the site-selectivity because most organic compounds have many similar C-H bonds. The most well developed procedures so far rely on the use of substrate control, in which the substrate has one inherently more reactive C-H bond or contains a directing group or the reaction is conducted intramolecularly so that a specific C-H bond is favoured. A more versatile but more challenging approach is to use catalysts to control which site in the substrate is functionalized. p450 enzymes exhibit C-H oxidation site-selectivity, in which the enzyme scaffold causes a specific C-H bond to be functionalized by placing it close to the iron-oxo haem complex. Several studies have aimed to emulate this enzymatic site-selectivity with designed transition-metal catalysts but it is difficult to achieve exceptionally high levels of site-selectivity. Recently, we reported a dirhodium catalyst for the site-selective functionalization of the most accessible non-activated (that is, not next to a functional group) secondary C-H bonds by means of rhodium-carbene-induced C-H insertion. Here we describe another dirhodium catalyst that has a very different reactivity profile. Instead of the secondary C-H bond, the new catalyst is capable of precise site-selectivity at the most accessible tertiary C-H bonds. Using this catalyst, we modify several natural products, including steroids and a vitamin E derivative, indicating the applicability of this method of synthesis to the late-stage functionalization of complex molecules. These studies show it is possible to achieve site-selectivity at different positions within a substrate simply by selecting the appropriate catalyst. We hope that this work will inspire the design of even more sophisticated catalysts, such that catalyst-controlled C-H functionalization becomes a broadly applied strategy for the synthesis of complex molecules.

Mechanistically Guided Workflow for Relating Complex Reactive Site Topologies to Catalyst Performance in C-H Functionalization Reactions.

Leveraging congested catalyst scaffolds has emerged as a key strategy for altering innate substrate site-selectivity profiles in C-H functionalization reactions. Similar to enzyme active sites, optimal small molecule catalysts often feature reactive cavities tailored for controlling substrate approach trajectories. However, relating three-dimensional catalyst shape to reaction output remains a formidable challenge, in part due to the lack of molecular features capable of succinctly describing complex reactive site topologies in terms of numerical inputs for machine learning applications. Herein, we present a new set of descriptors, "Spatial Molding for Approachable Rigid Targets" (SMART), which we have applied to quantify reactive site spatial constraints for an expansive library of dirhodium catalysts and to predict site-selectivity for C-H functionalization of 1-bromo-4-pentylbenzene via donor/acceptor carbene intermediates. Optimal site-selectivity for the terminal methylene position was obtained with Rh2(S-2-Cl-5-MesTPCP)4 (30.9:1 rr, 14:1 dr, 87% ee), while C-H functionalization at the electronically activated benzylic site was increasingly favored for Rh2(TPCP)4 catalysts lacking an ortho-Cl, Rh2(S-PTAD)4, and Rh2(S-TCPTAD)4, respectively. Intuitive global site-selectivity models for 25 disparate dirhodium catalysts were developed via multivariate linear regression to explicitly assess the contributing roles of steric congestion and dirhodium-carbene electrophilicity in controlling the site of C-H functionalization. The workflow utilizes spatial classification to extract descriptors only for reactive catalyst conformers, a nuance that may be widely applicable for establishing close correspondence between ground-state model systems and transition states. Broader still, SMART descriptors are amenable for delineating salient reactive site features to predict reactivity in other chemical and biological contexts.

Leveraging Regio- and Stereoselective C(sp3)-H Functionalization of Silyl Ethers to Train a Logistic Regression Classification Model for Predicting Site-Selectivity Bias.

The C-H functionalization of silyl ethers via carbene-induced C-H insertion represents an efficient synthetic disconnection strategy. In this work, site- and stereoselective C(sp3)-H functionalization at α, γ, δ, and even more distal positions to the siloxy group has been achieved using donor/acceptor carbene intermediates. By exploiting the predilections of Rh2(R-TCPTAD)4 and Rh2(S-2-Cl-5-BrTPCP)4 catalysts to target either more electronically activated or more spatially accessible C-H sites, respectively, divergent desired products can be formed with good diastereocontrol and enantiocontrol. Notably, the reaction can also be extended to enable desymmetrization of meso silyl ethers. Leveraging the broad substrate scope examined in this study, we have trained a machine learning classification model using logistic regression to predict the major C-H functionalization site based on intrinsic substrate reactivity and catalyst propensity for overriding it. This model enables prediction of the major product when applying these C-H functionalization methods to a new substrate of interest. Applying this model broadly, we have demonstrated its utility for guiding late-stage functionalization in complex settings and developed an intuitive visualization tool to assist synthetic chemists in such endeavors.

Procedural and 12-month in-hospital costs of primary infra-popliteal bypass surgery, infrapopliteal best endovascular treatment, and major lower limb amputation for chronic limb threatening ischemia.

OBJECTIVE: Chronic limb-threatening ischemia (CLTI) is a growing global problem due to the widespread use of tobacco and increasing prevalence of diabetes. Although the financial consequences are considerable, few studies have compared the relative cost-effectiveness of different CLTI management strategies. The Bypass vs Angioplasty in Severe Ischaemia of the Leg (BASIL)-2 trial is randomizing patients with CLTI to primary infrapopliteal (IP) vein bypass surgery (BS) or best endovascular treatment (BET) and includes a comprehensive within-trial cost-utility analysis. The aim of this study is to compare over a 12-month time horizon, the costs of primary IP BS, IP best endovascular treatment (BET), and major limb major amputation (MLLA) to inform the BASIL-2 cost-utility analysis. METHODS: We compared procedural human resource (HR) costs and total in-hospital costs for the index admission, and over the following 12-months, in 60 consecutive patients undergoing primary IP BS (n = 20), IP BET (n = 20), or MLLA (10 transfemoral and 10 transtibial) for CLTI within the BASIL prospective cohort study. RESULTS: Procedural HR costs were greatest for BS (BS £2551; 95% confidence interval [CI], £1934-£2807 vs MLLA £1130; 95% CI, £1046-£1297 vs BET £329; 95% CI, £242-£390; P < .001, Kruskal-Wallis) due to longer procedure duration and greater staff requirement. With regard to the index admission, MLLA was the most expensive due to longer hospital stay (MLLA £13,320; 95% CI, £8986-£18,616 vs BS £8714; 95% CI, £6097-£11,973 vs BET £4813; 95% CI, £3529-£6097; P < .001, Kruskal-Wallis). The total cost of the index admission and in-hospital care over the following 12 months remained least for BET (MLLA £26,327; 95% CI, £17,653-£30,458 vs BS £20,401; 95% CI, £12,071-£23,926 vs BET £12,298; 95% CI, £6961-£15,439; P < .001, Kruskal-Wallis). CONCLUSIONS: Over a 12-month time horizon, MLLA and IP BS are more expensive than IP BET in terms of procedural HR costs and total in-hospital costs. These economic data, together with quality of life data from BASIL-2, will inform the calculation of incremental cost-effectiveness ratios for different CLTI management strategies within the BASIL-2 cost-utility analysis.

Asymmetric Cyclopropanation with 4-Aryloxy-1-sulfonyl-1,2,3-triazoles: Expanding the Range of Rhodium-Stabilized Donor/Acceptor Carbenes to Systems with an Oxygen Donor Group.

Rhodium-catalyzed enantioselective synthesis of 1-phenoxycyclopropane-1-carbaldehydes by intermolecular cyclopropanation of terminal alkenes followed by imine hydrolysis is described. This methodology utilizes 4-aryloxy-1-sulfonyl-1,2,3-triazoles as the carbene precursors and the chiral dirhodium(II) tetracarboxylates Rh2(S-NTTL)4 or Rh2(S-DPCP)4 as the catalysts. These reactions are considered to proceed via rhodium-stabilized donor/acceptor carbene intermediates, and these studies demonstrate that a heteroatom donor group is compatible with an enantioselective transformation.

Site-selective and stereoselective functionalization of unactivated C-H bonds.

The laboratory synthesis of complex organic molecules relies heavily on the introduction and manipulation of functional groups, such as carbon-oxygen or carbon-halogen bonds; carbon-hydrogen bonds are far less reactive and harder to functionalize selectively. The idea of C-H functionalization, in which C-H bonds are modified at will instead of the functional groups, represents a paradigm shift in the standard logic of organic synthesis. For this approach to be generally useful, effective strategies for site-selective C-H functionalization need to be developed. The most practical solutions to the site-selectivity problem rely on either intramolecular reactions or the use of directing groups within the substrate. A challenging, but potentially more flexible approach, would be to use catalyst control to determine which site in a particular substrate would be functionalized. Here we describe the use of dirhodium catalysts to achieve highly site-selective, diastereoselective and enantioselective C-H functionalization of n-alkanes and terminally substituted n-alkyl compounds. The reactions proceed in high yield, and functional groups such as halides, silanes and esters are compatible with this chemistry. These studies demonstrate that high site selectivity is possible in C-H functionalization reactions without the need for a directing or anchoring group present in the molecule.

Functionalization of Piperidine Derivatives for the Site-Selective and Stereoselective Synthesis of Positional Analogues of Methylphenidate.

Rhodium-catalyzed C-H insertions and cyclopropanations of donor/acceptor carbenes have been used for the synthesis of positional analogues of methylphenidate. The site selectivity is controlled by the catalyst and the amine protecting group. C-H functionalization of N-Boc-piperidine using Rh2 (R-TCPTAD)4 , or N-brosyl-piperidine using Rh2 (R-TPPTTL)4 generated 2-substitited analogues. In contrast, when N-α-oxoarylacetyl-piperidines were used in combination with Rh2 (S-2-Cl-5-BrTPCP)4 , the C-H functionalization produced 4-susbstiuted analogues. Finally, the 3-substituted analogues were prepared indirectly by cyclopropanation of N-Boc-tetrahydropyridine followed by reductive regio- and stereoselective ring-opening of the cyclopropanes.

Comparison of 1,2-Diarylcyclopropanecarboxylates with 1,2,2-Triarylcyclopropanecarboxylates as Chiral Ligands for Dirhodium-Catalyzed Cyclopropanation and C-H Functionalization.

Dirhodium triarylcyclopropanecarboxylate catalysts (Rh2TPCP4) are sterically demanding and capable of controlling the site selectivity of C-H functionalization by means of C-H insertion with donor/acceptor carbenes. This study compares the structures and reactivity profiles of dirhodium triarylcyclopropanecarboxylates with dirhodium diarylcyclopropanecarboxylates. The absence of the third aryl group makes the catalysts less sterically demanding and lacks a well-defined preferred conformation. The catalysts have a greater tendency for inducing C-H functionalization at tertiary C-H bonds versus their triaryl counterparts but are generally not capable of achieving high levels of asymmetric induction. These studies confirm the critical requirement of having at least three substituents on the cyclopropanecarboxylate ligands to have well-defined sterically demanding catalysts capable of high levels of asymmetric induction.

Rhodium-Catalyzed Enantioselective [4+2] Cycloadditions of Vinylcarbenes with Dienes.

The reaction of 2-siloxycyclo-1,3-dienes with E-vinyldiazoacetates in the presence of the bulky chiral dirhodium tetracarboxylate catalyst, Rh2 (R-p-PhTPCP)4 results in an enantioselective [4+2] cycloaddition, in which three new stereogenic centers are formed. The [4+2] cycloadducts are generated as single diastereomers with high enantiocontrol (95-98 % ee). When the diene contains an additional stereogenic center, effective kinetic resolution can be achieved.

Distal Allylic/Benzylic C-H Functionalization of Silyl Ethers Using Donor/Acceptor Rhodium(II) Carbenes.

Regio- and stereoselective distal allylic/benzylic C-H functionalization of allyl and benzyl silyl ethers was achieved using rhodium(II) carbenes derived from N-sulfonyltriazoles and aryldiazoacetates as carbene precursors. The bulky rhodium carbenes led to highly site-selective functionalization of less activated allylic and benzylic C-H bonds even in the presence of electronically preferred C-H bonds located α to oxygen. The dirhodium catalyst Rh2 (S-NTTL)4 is the most effective chiral catalyst for triazole-derived carbene transformations, whereas Rh2 (S-TPPTTL)4 works best for carbenes derived from aryldiazoacetates. The reactions afford a variety of δ-functionalized allyl silyl ethers with high diastereo- and enantioselectivity. The utility of the present method was demonstrated by its application to the synthesis of a 3,4-disubstituted l-proline scaffold.