RESUMEN
Thermo Fisher Scientific released the Precision ID Ancestry Panel, a 165-single-nucleotide polymorphism (SNP) panel for ancestry prediction that was initially compatible with the manufacturer's massively parallel sequencer, the Ion Torrent Personal Genome Machine (PGM). The semiautomated workflow using the panel with the PGM involved several time-consuming manual steps across three instruments, including making templating solutions and loading sequencing chips. In 2014, the manufacturer released the Ion Chef robot, followed by the Ion S5 massively parallel sequencer in late 2015. The robot performs the templating with reagent cartridges and loads the chips, thus creating a fully automated workflow across two instruments. The objective of the work reported here is to compare the performance of two massively parallel sequencing systems and ascertain if the change in the workflow produces different ancestry predictions. For performance comparison of the two systems, forensic-type samples (n = 16) were used to make libraries. Libraries were templated either with the Ion OneTouch 2 system (for the PGM) or on the Ion Chef robot (for the S5). Sequencing results indicated that the ion sphere particle performance metrics were similar for the two systems. The total coverages per SNP and SNP quality were both higher for the S5 system. Ancestry predictions were concordant for the mock forensic-type samples sequenced on both massively parallel sequencing systems. The results indicated that automating the workflow with the Ion Chef system reduced the labor involved and increased the sequencing quality.
Asunto(s)
Secuenciación de Nucleótidos de Alto Rendimiento , Polimorfismo de Nucleótido Simple , Flujo de TrabajoRESUMEN
DNA extractions of semen samples commonly utilize dithiothreitol (DTT) to reduce and disrupt disulfide bonds. Although traditional extraction techniques remove DTT before downstream analyses, the forensic DNA community has recently explored Y-screening, direct amplification, and direct cell lysis assays that omit purification but employ reducing agents to lyse spermatozoa. This study examined the impact of residual DTT on downstream processes involving fluorescent dyes. Quantification using Investigator® Quantiplex HYres revealed a significant increase in the male DNA yield (p = 0.00056) and a >150,000,000-fold increase in the male:human DNA ratio when DTT remained in extracts versus when it was filtered out using a traditional purification method. When DTT was present with Quantifiler™ Trio, the true mean DNA yield for the large autosomal target significantly increased (p = 0.038) and the average reported DNA yields increased 1.1-fold, >9.5-fold, and 1.3-fold for the small autosomal, large autosomal, and male targets, respectively. DTT-spiked DNA standards from both kits were impacted similarly to samples with residual DTT, demonstrating that observed effects were related to DTT and not the extraction method. This study corroborates other reports that DTT adversely affects multiple dyes (e.g., Cy5, Quasar 670, SYBR Green I, TMR, and Mustang Purple® ). Overall, DTT causes inaccurate quantities and, consequently, inaccurate calculated male:female ratios when used in conjunction with these kits. Thus, implementation of newer direct-to-PCR assays incorporating DTT should either be avoided or used only with carefully evaluated, compatible dyes.
Asunto(s)
Dermatoglifia del ADN , Ditiotreitol/química , Colorantes Fluorescentes/química , Reacción en Cadena en Tiempo Real de la Polimerasa , ADN/análisis , Electroforesis Capilar , Humanos , Indicadores y Reactivos/química , Masculino , Repeticiones de Microsatélite , Espermatozoides/químicaRESUMEN
Sample collection at the crime scene can introduce variations in DNA recovery based upon the substrate from which a sample is collected, the material of the collection device used, or the storage conditions after collection. There are many factors during this process that can degrade the sample during drying and storage, and before DNA extraction can be performed. The purpose of this study was to evaluate and compare the performance of standard cotton swab collection with the Bode BioSafe® swab, which includes both a desiccant at the swab head and proprietary compounds to prevent degradation of the sample during sample collection and preservation. Blood and touch DNA samples were collected from porous and nonporous substrates and stored at elevated temperatures to simulate accelerated time. DNA quantification and STR profile data were used to assess the performance of the swabs. BioSafe® swab collection resulted in similar DNA yields from blood samples and significantly higher DNA yields from touch samples when compared to collection with cotton swabs. BioSafe® swabs also resulted in higher DNA integrity during long-term storage, increased STR profile success and improved retention of low-level contributor alleles.
Asunto(s)
Dermatoglifia del ADN , ADN/análisis , Manejo de Especímenes/instrumentación , Análisis Químico de la Sangre , Degradación Necrótica del ADN , Electroforesis Capilar , Humanos , Repeticiones de Microsatélite , Reacción en Cadena de la Polimerasa , Manejo de Especímenes/métodos , TactoRESUMEN
As DNA technology becomes increasingly sensitive, forensic laboratories are receiving more low-template DNA samples. These samples, already low in DNA content, become even more challenging to process as the available DNA becomes further reduced during the extraction step. In this study, two extraction modifications were tested to determine if the cause of DNA loss could be identified and mitigated. A double lysis technique was used to test for DNA loss in the sample collection substrate, and lysate eluates were re-extracted to determine DNA loss from inefficient binding to the silica column. Both modifications showed DNA was lost at these steps. However, resulting STR profiles from these samples had fewer peaks and lower peak heights when compared to samples processed with no extraction modifications. Overall, the potential benefits of adding these extraction modifications for low-template DNA sample processing are not enough to justify the risk associated with additional manipulation.
Asunto(s)
Dermatoglifia del ADN , ADN/aislamiento & purificación , Genética Forense/métodos , Membrana Celular , Humanos , Repeticiones de Microsatélite , Reacción en Cadena de la PolimerasaRESUMEN
This study investigated whether a difference exists in the ability to obtain quality mitochondrial DNA (mtDNA) sequence data from hair shafts due to specific melanin content differences. Eumelanin, the pigment in darker hairs, protects nuclear DNA in the skin by absorbing and scattering UV radiation. In contrast, sensitized pheomelanin, the predominate melanin in red hairs and some blond hairs, is unable to prevent DNA damage in skin upon exposure to UV radiation. It has been reported in the literature that darker hairs (predominate eumelanin content) have a higher mtDNA sequencing success rate than lighter colored hairs. However, others have reported to the contrary when different methodologies are used. In this study, 2-cm hair fragments were cut from dark brown, red, and gray white hairs and typed using standard casework mtDNA sequence analysis methods. All 30 hair fragments produced quality mtDNA sequence data on first attempt from the second half of hypervariable region 1. These results are likely due to the apparent shielding of mtDNA by the hard protein of the hair shaft fiber from radiation-induced damage, regardless of melanin type, after 10-months minimal solar exposure. Nonetheless, this study may serve as a guide for future quantitative studies that investigate hair mtDNA photodamage in circumstances of increased solar, chemical, environmental, or mechanical damage.
Asunto(s)
ADN Mitocondrial/análisis , Cabello/metabolismo , Melaninas/metabolismo , Niño , Regiones Determinantes de Complementariedad , Femenino , Genética Forense , Color del Cabello , Humanos , Microscopía , Reacción en Cadena de la Polimerasa , Análisis de Secuencia de ADNRESUMEN
A single focus optical tweezer is formed when a laser beam is launched through a high numerical aperture immersion objective. This objective focuses the beam down to a diffraction-limited spot, which creates an optical trap where cells suspended in aqueous solutions can be held fixed. Spermatozoa, an often probative cell type in forensic investigations, can be captured inside this optical trap and dragged one by one across millimeter-length distances in order to create a cluster of cells which can be subsequently drawn up into a capillary for collection. Sperm cells are then ejected onto a sterile cover slip, counted, and transferred to a tube for DNA analysis workflow. The objective of this research was to optimize sperm cell collection for maximum DNA yield, and to determine the number of trapped sperm cells necessary to produce a full STR profile. A varying number of sperm cells from both a single-source semen sample and a mock sexual assault sample were isolated utilizing optical tweezers and processed using conventional STR analysis methods. Results demonstrated that approximately 50 trapped spermatozoa were required to obtain a consistently full DNA profile. A complete, single-source DNA profile was also achieved by isolating sperm cells via optical trapping from a mixture of sperm and vaginal epithelial cells. Based on these results, optical tweezers are a viable option for forensic applications such as separation of mixed populations of cells in forensic evidence.
Asunto(s)
Separación Celular , Pinzas Ópticas , Manejo de Especímenes , Espermatozoides/citología , Separación Celular/instrumentación , Separación Celular/métodos , Dermatoglifia del ADN , Femenino , Humanos , Masculino , ViolaciónRESUMEN
Evaluation of microRNA (miRNA) expression as a potential method for forensic body fluid identification has been the subject of investigation over the past several years. Because of their size and encapsulation within proteins and lipids, miRNAs are inherently less susceptible to degradation than other RNAs. In this work, blood, urine, semen, and saliva were exposed to environmental and chemical conditions mimicking sample compromise at the crime scene. For many treated samples, including 100% of blood samples, miRNAs remained detectable, comparable to the untreated control. Sample degradation varied by body fluid and treatment, with blood remarkably resistant, while semen and saliva are more susceptible to environmental insult. Body fluid identification using relative miRNA expression of blood and semen of the exposed samples was 100% and 94%, respectively. Given the overall robust results herein, the case is strengthened for the use of miRNAs as a molecular method for body fluid identification.
Asunto(s)
Análisis Químico de la Sangre , MicroARNs/análisis , Saliva/química , Semen/química , Orina/química , Ácido Acético , Detergentes , Genética Forense , Calor , Humanos , Estabilidad del ARN , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Hipoclorito de Sodio , Manejo de Especímenes , Rayos UltravioletaRESUMEN
Traditional methods for bone pulverization typically generate heat, risking stability of DNA sample. SPEX™ has developed cryogenic grinders which introduce liquid nitrogen to cool the sample and aid in the grinding process. In this study, the Freezer Mill 6970 EFM was used with two DNA extraction methods and routine downstream STR analysis procedures. DNA from as little as 0.1 g of bone powder was used to develop full STR profiles after freezer mill pulverization, and the method was reproducible. Further, no contamination was detected upon cleaning/reuse of the sample vials. There were no significant differences in DNA yield, STR alleles detected, or peak heights using the freezer mill as compared to traditional grinding, and successful DNA profiles were achieved from as low as 0.1 g of bone powder with this method. Overall, this work indicates that this cryogenic mill method may be used as a viable alternative to traditional tissue grinders.
Asunto(s)
Frío , ADN/aislamiento & purificación , Fémur/química , Manejo de Especímenes/instrumentación , Tibia/química , Dermatoglifia del ADN , Humanos , Repeticiones de Microsatélite , Nitrógeno , Flujo de TrabajoRESUMEN
DNA profiles have been obtained from fingerprints, but there is limited knowledge regarding DNA analysis from archived latent fingerprints-touch DNA "sandwiched" between adhesive and paper. Thus, this study sought to comparatively analyze a variety of collection and analytical methods in an effort to seek an optimized workflow for this specific sample type. Untreated and treated archived latent fingerprints were utilized to compare different biological sampling techniques, swab diluents, DNA extraction systems, DNA concentration practices, and post-amplification purification methods. Archived latent fingerprints disassembled and sampled via direct cutting, followed by DNA extracted using the QIAamp® DNA Investigator Kit, and concentration with Centri-Sep™ columns increased the odds of obtaining an STR profile. Using the recommended DNA workflow, 9 of the 10 samples provided STR profiles, which included 7-100% of the expected STR alleles and two full profiles. Thus, with carefully selected procedures, archived latent fingerprints can be a viable DNA source for criminal investigations including cold/postconviction cases.
Asunto(s)
Dermatoglifia del ADN , ADN/aislamiento & purificación , Dermatoglifia , Manejo de Especímenes/métodos , Flujo de Trabajo , Humanos , Repeticiones de Microsatélite , TactoRESUMEN
Analysis of biological mixtures is a significant problem for forensic laboratories, particularly when the mixture contains only one cell type. Contributions from multiple individuals to biologic evidence can complicate DNA profile interpretation and often lead to a reduction in the probative value of DNA evidence or worse, its total loss. To address this, we have utilized an analytical technique that exploits the intrinsic immunological variation among individuals to physically separate cells from different sources in a mixture prior to DNA profiling. Specifically, we applied a fluorescently labeled antibody probe to selectively bind to one contributor in a mixture through allele-specific interactions with human leukocyte antigen (HLA) proteins that are expressed on the surfaces of most nucleated cells. Once the contributor's cells were bound to the probe, they were isolated from the mixture using fluorescence activated cell sorting (FACS)-a high throughput technique for separating cell populations based on their optical properties-and then subjected to STR analysis. We tested this approach on two-person and four-person whole blood mixtures where one contributor possessed an HLA allele (A*02) that was not shared by other contributors to the mixture. Results showed that hybridization of the mixture with a fluorescently-labeled antibody probe complimentary to the A*02 allele's protein product created a cell population with a distinct optical profile that could be easily differentiated from other cells in the mixture. After sorting the cells with FACS, genetic analysis showed that the STR profile of this cell population was consistent with that of the contributor who possessed the A*02 allele. Minor peaks from the A*02 negative contributor(s) were observed but could be easily distinguished from the profile generated from A*02 positive cells. Overall, this indicates that HLA antibody probes coupled to FACS may be an effective approach for generating STR profiles of individual contributors from forensic mixtures.
Asunto(s)
Análisis Químico de la Sangre/métodos , Dermatoglifia del ADN/métodos , Citometría de Flujo/métodos , Ciencias Forenses/métodos , Antígeno HLA-A2/sangre , Repeticiones de Microsatélite , Alelos , Colorantes Fluorescentes , Antígeno HLA-A2/genética , HumanosRESUMEN
Qiagen's Investigator™ Quantiplex kit, a total human DNA quantitation kit, has a 200-base pair internal control, fast cycling time, and scorpion molecules containing a covalently linked primer, probe, fluorophore, and quencher. The Investigator™ Quantiplex kit was evaluated to investigate a value under which complete short tandem repeat (STR) failure was consistently obtained. Buccal swabs were extracted using the Qiagen QIAamp(®) DNA Blood Mini Kit, quantified with the Investigator™ Quantiplex kit using a tested half-volume reaction, amplified with the ABI AmpFlSTR(®) Identifiler kit, separated on the 3100Avant Genetic Analyzer, and data analyzed with GeneMapper(®) ID v.3.2. While undetected samples were unlikely to produce sufficient data for statistical calculations or CODIS upload (2.00 alleles and 0.82 complete loci on average), data may be useful for exclusionary purposes. Thus, the Investigator™ Quantiplex kit may be useful for predicting STR success. These findings are comparable with previously reported data from the Quantifiler™ Human kit.