Derivation of human health and odor risk control values for soil ammonia nitrogen by incorporating solid-liquid partitioning, ammonium/ammonia equilibrium: A case study of a retired nitrogen fertilizer site in China.

Nitrogen fertilizer supports agricultural intensification, but its manufacturing results in substantial contaminated sites. Ammonia nitrogen is the main specific pollutant in retired nitrogen fertilizer sites with potential human health and odor risks. However, few studies focus on ammonia nitrogen risk assessment at contaminated sites, particularly considering its solid-liquid partitioning process (Kd) and ammonium/ammonia equilibrium process (R) in the soil. This study took a closed nitrogen fertilizer factory site as an example and innovatively introduced Kd and R to scientifically assess the human health and odor risk of ammonia nitrogen. The risk control values (RCVs) of ammonia nitrogen based on human health and odor risk were also derived. The maximum concentration of ammonia nitrogen was 3380 mg/kg in the unsaturated soil, which was acceptable for human health because the health RCVs were 5589 ∼ 137,471 mg/kg in various scenarios. However, odor risk was unacceptable for RCVs were 296 ∼ 1111 mg/kg under excavation scenarios and 1118 ∼ 35,979 mg/kg under non-excavation scenarios. Of particular concern, introducing Kd and R in calculation increased the human health and odor RCVs by up to 27.92 times. Despite the advancements in ammonia risk assessment due to the introduction of Kd and R, odor risk during excavation remains a vital issue. These findings inform a more scientific assessment of soil ammonia risk at contaminated sites and provide valuable insights for the management and redevelopment of abandoned nitrogen fertilizer plant sites.

Machine Learning Modeling Based on Microbial Community for Prediction of Natural Attenuation in Groundwater.

Natural attenuation is widely adopted as a remediation strategy, and the attenuation potential is crucial to evaluate whether remediation goals can be achieved within the specified time. In this work, long-term monitoring of indigenous microbial communities as well as benzene, toluene, ethylbenzene, and xylene (BTEX) and chlorinated aliphatic hydrocarbons (CAHs) in groundwater was conducted at a historic pesticide manufacturing site. A machine learning approach for natural attenuation prediction was developed with random forest classification (RFC) followed by either random forest regression (RFR) or artificial neural networks (ANNs), utilizing microbiological information and contaminant attenuation rates for model training and cross-validation. Results showed that the RFC could accurately predict the feasibility of natural attenuation for both BTEX and CAHs, and it could successfully identify the key genera. The RFR model was sufficient for the BTEX natural attenuation rate prediction but unreliable for CAHs. The ANN model showed better performance in the prediction of the attenuation rates for both BTEX and CAHs. Based on the assessments, a composite modeling method of RFC and ANN was proposed, which could reduce the mean absolute percentage errors. This study reveals that the combined machine learning approach under the synergistic use of field microbial data has promising potential for predicting natural attenuation.

Enhanced removal of arsenic and cadmium from contaminated soils using a soluble humic substance coupled with chemical reductant.

Soil washing is an efficient, economical, and green remediation technology for removing several heavy metal (loid)s from contaminated industrial sites. The extraction of green and efficient washing agents from low-cost feedback is crucially important. In this study, a soluble humic substance (HS) extracted from leonardite was first tested to wash soils (red soil, fluvo-aquic soil, and black soil) heavily contaminated with arsenic (As) and cadmium (Cd). A D-optimal mixture design was investigated to optimize the washing parameters. The optimum removal efficiencies of As and Cd by single HS washing were found to be 52.58%-60.20% and 58.52%-86.69%, respectively. Furthermore, a two-step sequential washing with chemical reductant NH2OH•HCl coupled with HS (NH2OH•HCl + HS) was performed to improve the removal efficiency of As and Cd. The two-step sequential washing significantly enhanced the removal of As and Cd to 75.25%-81.53% and 64.53%-97.64%, which makes the residual As and Cd in soil below the risk control standards for construction land. The two-step sequential washing also effectively controlled the mobility and bioavailability of residual As and Cd. However, the activities of soil catalase and urease significantly decreased after the NH2OH•HCl + HS washing. Follow-up measures such as soil neutralization could be applied to relieve and restore the soil enzyme activity. In general, the two-step sequential soil washing with NH2OH•HCl + HS is a fast and efficient method for simultaneously removing high content of As and Cd from contaminated soils.

Spatiotemporal characteristics and dynamic risk assessment of a multi-solvents abandoned pesticide-contaminated site with a long history, in China.

With the development of the economy and the adjustment of urban planning and layout, abandoned pesticide sites are widely distributed in major and medium cities in China. Groundwater pollution of a large number of abandoned pesticide-contaminated sites has caused great potential risks to human health. Up to now, few relevant studies concerned the spatiotemporal variation of risks exposure to multi-pollutants in groundwater using probabilistic methods. In our study, the spatiotemporal characteristics of organics contamination and corresponding health risks in the groundwater of a closed pesticide site were systematically assessed. A total of 152 pollutants were targeted for monitoring over a time span up to five years (i.e., June 2016-June 2020). BTEX, phenols, chlorinated aliphatic hydrocarbons, and chlorinated aromatic hydrocarbons were the main contaminants. The metadata was subjected to health risk assessments using the deterministic and probabilistic methods for four age groups, and the results showed that the risks were highly unacceptable. Both methods showed that children (0-5 years old) and adults (19-70 years old) were the age groups with the highest carcinogenic and non-carcinogenic risks, respectively. Compared with inhalation and dermal contact, oral ingestion was the predominant exposure pathway that contributed 98.41%-99.69% of overall health risks. Spatiotemporal analysis further revealed that the overall risks first increased then decreased within five years. The risk contributions of different pollutants were also found to vary substantially with time, indicating that dynamic risk assessment is necessary. Compared with the probabilistic method, the deterministic approach relatively overestimated the true risks of OPs. The results provide a scientific basis and practical experience for scientific management and governance of abandoned pesticide sites.

Characterization and evaluation of the leachability of bottom ash from a mobile emergency incinerator of COVID-19 medical waste: A case study in Huoshenshan Hospital, Wuhan, China.

To dispose of the medical waste generated during the COVID-19 pandemic, a new type of mobile emergency incinerator (MEI) was used in Huoshenshan Hospital, Wuhan, China, and consequently, it produced a number of medical bottom ashs (MBAs). In this study, the characterization and environmental risk evaluation of these MBAs were conducted to evaluate the disposal effect of this MEI used during the pandemic. Three types of leaching tests, EN 12457-2, TCLP 1311, and HJ/T 299-2007, were compared to investigate the release behaviors of major and trace elements from these MBAs. Lack of detection of COVID-19 in MBAs showed that this mobile emergency incinerator could thoroughly eliminate the COVID-19 virus in medical wastes to avoid secondary transmission. The results indicated that the increasing usage of chlorinated disinfectants and physiological saline solutions resulted in high Cl contents in MBAs. In addition, the increasing usage of polypropylene (PP) products changed the chemical properties and compositions of MBAs, with Ca as the main element. The leachability investigation revealed that the main metals in leachates were Ca, Na and K, and the toxic heavy metals such as Zn, Pb, Cu, and Cr in MBAs were difficult to extract because of the high pH (>12) of these MBAs. This study could provide consultation for the treatment and management of MBAs produced from MEIs dealing with emergent infectious diseases such as COVID-19.

Source apportionment and health risk assessment of chemicals of concern in soil, water and sediment at a large strontium slag pile area.

Strontium (Sr) is an alkaline earth metal that has adverse effects on bone tissue, but received little attention compared to other often-studied metals. This study analyzed the contents/concentrations of Sr, barium (Ba), sulfate (SO42-), sulfide (S2-), and six common metals in 209 multi-media samples, including slag, soil, groundwater, surface water, and sediment, collected at a large Sr slag pile area. Sr was the dominant chemical of concern (COC) in the soil and groundwater, with contents/concentrations being 35.50-32200 mg/kg and 0.57-152 mg/L, respectively, much higher than those reported in previous research. Contents/concentrations of all COCs in the surface water and sediment were relatively low, except Sr content in the sediment near the slag pile. The LogKd value of Sr was calculated to be lower than those of common metals, indicating relatively high mobility of Sr in the aquatic environment. Contamination assessment using Nemerow index indicated near half of the soil and groundwater sampling locations, especially those within and near the slag pile, were heavily contaminated, and Sr was the dominant COC. The positive matrix factorization model suggested four sources for the COCs in soil, including Sr slag pile/SrCO3 production, agricultural activities, industrial activities, and natural sources, with contribution rates of 66.88%, 5.28%, 7.5%, and 20.34%, respectively. Monte Carlo simulation-based probabilistic health risk assessment revealed that the non-carcinogenic risk of groundwater, and the carcinogenic risk of soil and groundwater, were unacceptable. Notably, Sr was the unique COC posing non-carcinogenic risk among the COCs studied. Our results provide the scientific support needed for managing Sr point source impacted area.

A Single Soil Washing with Humic Substance Can Achieve the Risk-Based Remedial Target for Nickel Contaminated Soil.

Risk-based soil remediation and management have become a global environmental issue. Here, a nickel (Ni)-contaminated site was selected to conduct the risk-based remediation strategy. The Health and Environment Risk Assessment Software was used to calculate the human health risk and the remedial target value (RTV) of Ni. Soil highly contaminated with Ni (424.30 mg kg-1) could cause an unacceptable carcinogenic risk (1.41 × 10-6), which needs further remediation. Hence, a soluble humic substance (HS) was used as the washing agent to remove Ni. After a single wash at pH 4 and 8, the Ni concentrations in soil were reduced to 278.05 and 288.27 mg kg-1, both below the RTV (300 mg kg-1). Furthermore, sequential extraction analysis revealed that the residual Ni was maintained stably in the soil after HS washing. These findings suggested that HS is a promising washing agent for Ni-contaminated soil remediation under the guidance of risk control.

Response of microbial communities in aquifers with multiple organic solvent contamination: Implications for MNA remedy.

The application of Monitored Natural Attenuation (MNA) technology has been widespread, while there is a paucity of data on groundwater with multiple co-contaminants. This study focused on high permeability, low hydraulic gradient groundwater with co-contamination of benzene, toluene, ethylbenzene, and xylenes (BTEX), chlorinated aliphatic hydrocarbons (CAHs), and chlorinated aromatic hydrocarbons (CPs). The objective was to investigate the responses of microbial communities during natural attenuation processes. Results revealed greater horizontal variation in groundwater microbial community composition compared to vertical variation. The variation was strongly correlated with the total contaminant quantity (r = 0.722, p < 0.001) rather than individual contaminants. BTEX exerted a more significant influence on community diversity than other contaminants. The assembly of groundwater microbial communities was primarily governed by deterministic processes (ßNTI < -2) in high contaminant concentration zones, while stochastic processes (|ßNTI| < 2) dominated in low-concentration zones. Moreover, the microbial interactions shifted at different depths indicating the degradation rate variation in the vertical. This study makes fundamental contribution to the understanding for the effects of groundwater flow and material fields on indigenous microbial communities, which will provide a scientific basis for more precise adoption of microbial stimulation/augmentation to accelerate the rate of contaminant removal.

Risk assessment and source analysis of heavy metals in soil around an asbestos mine in an arid plateau region, China.

Asbestos is widely used in construction, manufacturing, and other common industrial fields. Human activities such as mining, processing, and transportation can release heavy metals from asbestos into the surrounding soil environment, posing a health hazard to the mining area's environment and its surrounding residents. The purpose of the present study was to determine the extent of ecological and human health damage caused by asbestos pollution, as well as the primary contributors to the contamination, by examining a large asbestos mine and the surrounding soil in China. The level of heavy metal pollution in soil and sources were analyzed using methods such as the geo-accumulation index (Igeo), potential ecological risk index (RI), and positive matrix factorization (PMF) model. A Monte Carlo simulation-based health risk model was employed to assess the health risks of heavy metals in the study area's soil to human beings. The results showed that the concentrations of As, Pb, Cr, Cu, and Ni in the soil were 1.74, 0.13, 13.31, 0.33, and 33.37 times higher than the local soil background values, respectively. The Igeo assessment indicated significant accumulation effects for Ni, Cr, and As. The RI evaluation revealed extremely high comprehensive ecological risks (RI ≥ 444) in the vicinity of the waste residue heap and beneficiation area, with Ni exhibiting strong individual potential ecological risk (Eir ≥ 320). The soil health risk assessment demonstrated that As and Cr posed carcinogenic risks to adults, with mean carcinogenic indices (CR) of 1.56E - 05 and 4.14E - 06, respectively. As, Cr, and Cd posed carcinogenic risks to children, with mean CRs of 1.08E - 04, 1.61E - 05, and 2.68E - 06, respectively. Cr also posed certain non-carcinogenic risks to both adults and children. The PMF model identified asbestos contamination as the primary source of heavy metals in the soil surrounding the asbestos mining area, contributing to 79.0%. According to this study, it is recommended that management exercise oversight and regulation over the concentrations of Ni, Cr, Cd, and As in the soil adjacent to asbestos mines, establish a designated control zone to restrict population activities, and locate residential zones at a safe distance from the asbestos mine production zone.

Can we redevelop ammonia nitrogen contaminated sites without remediation? The key role of subsurface pH in human health risk assessment.

Nitrogen fertilizer supports global food production, but its manufacturing results in substantial ammonia nitrogen (AN) contaminated sites which remain largely unexplored. In this study, ten representative AN contaminated sites were investigated, covering a wide range of subsurface pH, temperature, and AN concentration. A total of 7232 soil samples and 392 groundwater samples were collected to determine the concentration levels, migration patterns, and accurate health risks of AN. The results indicated that AN concentrations in soil and groundwater reached 12700 mg/kg and 12600 mg/L, respectively. AN concentrations were higher in production areas than in non-production areas, and tended to migrate downward from surface to deeper soil. Conventional risk assessment based on AN concentration identified seven out of the ten sites presenting unacceptable risks, with remediation costs and CO2 emissions amounting to $1.67 million and 17553.7 tons, respectively. A novel risk assessment model was developed, which calculated risks based on multiplying AN concentration by a coefficient fNH3 (the ratio of NH3 to AN concentration). The mean fNH3 values, primarily affected by subsurface pH, varied between 0.02 and 0.25 across the ten sites. This new model suggested all investigated sites posed acceptable health risks related to AN exposure, leading to their redevelopment without AN-specific remediation. This research offers a thorough insight into AN contaminated site, holds great realistic significance in alleviating global economic and climate pressures, and highlights the need for future research on refined health risk assessments for more contaminants.

Determining priority control toxic metal for different protection targets based on source-oriented ecological and human health risk assessment around gold smelting area.

Determining the priority control source and pollutant is the key for the eco-health protection and risk management around gold smelting area. To this end, a case study was conducted to explore the pollution characteristics, source apportionment, ecological risk and human health risk of toxic metals (TMs) in agricultural soils surrounding a gold smelting enterprise. Three effective receptor models, including positive matrix factorization model (PMF), ecological risk assessment (ERA), and probabilistic risk assessment (PRA) have been combined to apportion eco-human risks for different targets. More than 95.0% of samples had a Nemerow pollution index (NPI) > 2 (NPImean=4.27), indicating moderately or highly soil TMs contamination. Four pollution sources including gold smelting activity, mining source, agricultural activity and atmosphere deposition were identified as the major sources, with the contribution rate of 17.52%, 44.16%, 13.91%, and 24.41%, respectively. For ecological risk, atmosphere deposition accounting for 30.8% was the greatest contributor, which was mainly loaded on Hg of 51.35%. The probabilistic health risk assessment revealed that Carcinogenic risks and Non-carcinogenic risks of all population were unacceptable, and children suffered from a greater health risk than adults. Gold smelting activity (69.2%) and mining source (42.0%) were the largest contributors to Carcinogenic risks and Non-carcinogenic risks, respectively, corresponding to As and Cr as the target pollutants. The priority pollution sources and target pollutants were different for the eco-health protection. This work put forward a new perspective for soil risk control and management, which is very beneficial for appropriate soil remediation under limited resources and costs.

Comprehensive distribution characteristics and factors affecting the migration of chromium in a typical chromium slag-contaminated site with a long history in China.

The contamination of abandoned chromium slag-contaminated sites poses serious threats to human health and the environment. Therefore, improving the understanding of their distribution characteristics and health risks by multiple information is necessary. This study explored the distribution, accumulation characteristic, and the role in the migration process of chromium. The results showed that the contents of total Cr and Cr (VI) ranged from 12.00 to 7400.00 mg/kg, and 0.25 to 2160.00 mg/kg, respectively. The average contents of both total Cr and Cr (VI) reached the highest value at the depth of 7-9 m, where the silt layer retaining total Cr and Cr (VI) was. The spatial distribution analysis revealed that the total contamination area percentages of total Cr and Cr (VI) reached 7.87% and 90.02% in the mixed fill layer, and reduced to 1.21% and 34.53% in the silty layer, and the same heavily polluted areas were located in the open chromium residue storage. Soil pH and moisture content were the major factors controlling the migration of total Cr and Cr(VI) in soils. Results of probabilistic health risk assessment revealed that carcinogenic risk was negligible for adults and children, and the sensitive analysis implied that the content of Cr(VI) was the predominant contributor to carcinogenic risk. The combination of chemical reduction and microbial remediation could be the feasible remediation strategy for soil Cr(VI) pollution. Overall, this study provides scientific information into the chromium post-remediation and pollution management for various similar chromium-contaminated sites.

Natural attenuation of BTEX and chlorobenzenes in a formerly contaminated pesticide site in China: Examining kinetics, mechanisms, and isotopes analysis.

Groundwater contamination from abandoned pesticide sites is a prevalent issue in China. To address this problem, natural attenuation (NA) of pollutants has been increasingly employed as a management strategy for abandoned pesticide sites. However, limited studies have focused on the long-term NA process of co-existing organic pollutants in abandoned pesticide sites by an integrated approach. In this study, the NA of benzene, toluene, ethylbenzene, and xylene (BTEX), and chlorobenzenes (CBs) in groundwater of a retired industry in China was systematically investigated during the monitoring period from June 2016 to December 2021. The findings revealed that concentrations of BTEX and CBs were effectively reduced, and their NA followed first-order kinetics with different rate constants. The sulfate-reducing bacteria, nitrate-reducing bacteria, fermenting bacteria, aromatic hydrocarbon metabolizing bacteria, and reductive dechlorinating bacteria were detected in groundwater. It was observed that distinct environmental parameters played a role in shaping both overall and key bacterial communities. ORP (14.72%) and BTEX (12.89%) were the main drivers for variations of the whole and key functional microbial community, respectively. Moreover, BTEX accelerated reductive dechlorination. Furthermore, BTEX and CBs exhibited significant enrichment of 13C, ranging from +2.9 to +27.3‰, demonstrating their significance in situ biodegradation. This study provides a scientific basis for site management.

Analysis of the Degradation of OCPs Contaminated Soil by the BC/nZVI Combined with Indigenous Microorganisms.

Organochlorine pesticides (OCPs) were typical persistent organic pollutants that posed great hazards and high risks in soil. In this study, a peanut shell biochar-loaded nano zero-valent iron (BC/nZVI) material was prepared in combination with soil indigenous microorganisms to enhance the degradation of α-hexachlorocyclohexane(α-HCH) and γ-hexachlorocyclohexane(γ-HCH) in water and soil. The effects of BC/nZVI on indigenous microorganisms in soil were investigated based on the changes in redox potential and dehydrogenase activity in the soil. The results showed as follows: (1) The specific surface area of peanut shell biochar loaded with nano-zero-valent iron was large, and the nano-zero-valent iron particles were evenly distributed on the peanut shell biochar; (2) peanut shell BC/nZVI had a good degradation effect on α-HCH and γ-HCH in water, with degradation rates of 64.18% for α-HCH and 91.87% for γ-HCH in 24 h; (3) peanut shell BC/nZVI also had a good degradation effect on α-HCH and γ-HCH in soil, and the degradation rates of α-HCH and γ-HCH in the 1% BC/nZVI reached 55.2% and 85.4%, second only to 1% zero-valent iron. The degradation rate was the fastest from 0 to 7 days, while the soil oxidation-reduction potential (ORP) increased sharply. (4) The addition of BC/nZVI to the soil resulted in a significant increase in dehydrogenase activity, which further promoted the degradation of HCHs; the amount of HCHs degradation was significantly negatively correlated with dehydrogenase activity. This study provides a remediation strategy for HCH-contaminated sites, reducing the human health risk of HCHs in the soil while helping to improve the soil and increase the activity of soil microorganisms.

An Analysis of the Spatial Characteristics and Transport Fluxes of BTEX in Soil and Atmospheric Phases at a Decommissioned Steel Mill Site in China with a Long History.

BTEX (benzene, toluene, ethylbenzene, and xylene), as characteristic pollutants in chemical plant sites, are widely present in the environment and pose a serious threat to the health and safety of nearby residents. Studying the spatial distribution characteristics and transport fluxes of BTEX in soil and air at contaminated sites and the health risks they pose to humans is of great significance for fine pollution control and environmental management. This study took a typical decommissioned steel plant as a case study. A total of 23 soil and air samples were collected from different locations to investigate the spatial distribution characteristics of BTEX in soil and air. The transport and fate of BTEX in soil and air were evaluated using the fugacity model, and finally, a human health risk assessment was conducted. The results indicate a relatively severe level of benzene pollution in both soil and air. The maximum exceedance factor of benzene in soil samples is 31.5, with the concentration exceedance depth at 1.5 m. The maximum concentration of benzene in air samples is 4.98 µg·m-3. Benzene, at 5.9% of the site, shows a low flux with negative values, while other components at various locations all exhibit a trend of transport from the soil phase to the atmospheric phase. Benzene is the pollutant that contributes the most to the transport flux from soil to air within the site. The coking area and sewage treatment area are key areas within the steel mill where BTEX accumulate easily in the soil. The non-carcinogenic risk values of the individual components of BTEX in the soil are below the acceptable risk level. However, the carcinogenic risk value of benzene in the children's exposure scenario exceeds the carcinogenic risk level of 10-6. The carcinogenic risk range of various components of BTEX in the air is 2.63 × 10-6~3.88 × 10-5, with 28.6% of the locations exceeding the threshold of 10-6. The range of the total HI (hazard index) is 2.08 × 10-4~1.81 × 10-1, all of which is below the safety threshold of 1. The results of this study will provide scientific support for the fine pollution control and environmental management of industrial contaminated sites with BTEX as their typical pollutants.

[Preparation of Iron-modified Biochar and Its Application in Arsenic Contaminated Soil Remediation].

Biochar has a range of advantages including large porosity, high specific surface area, and strong adsorption capacity. It has been widely used in environmental pollution remediation, soil improvement, and carbon sequestration and emission reduction. Arsenic (As) is a highly toxic pollutant widely distributed throughout the soil. In typical surface soils, the most common forms of As are arsenite (AsO33-) and arsenate (AsO43-). Since most biochar surfaces are negatively charged, the adsorption efficiency of biochar to arsenic is usually low, and the biochar material needs to be modified to enhance its As adsorption performance. Iron-based materials, such as zero valent iron and iron oxide, are excellent As adsorption materials with wide environmental sources. They can be loaded to biochar to form iron-modified biochar via precipitation, pyrolysis, ball-milling, and micro-biological methods. The combined advantages of the iron-modified biochar will expand the application of biochar materials in environmental remediation. Based on a systematic analysis of the literature on iron-modified biochar in recent years, this study reviewed the common preparation methods of iron-modified biochars; analyzed biochar substrates, iron-modified biochar, and their synergistic mechanisms on As adsorption; and briefly expounded the application status of iron-modified biochar in soil pollution remediation. The prospects of the future research direction of iron-modified biochar were put forward as a reference for the large-scale application of biochar materials in the future.

Contaminant characterization at pesticide production sites in the Yangtze River Delta: Residue, distribution, and environmental risk.

The Yangtze River Delta (YRD) is the largest pesticide-producing region in the world. Contamination of pesticide production sites has always been a focus of public attention. Twenty pesticide production sites in YRD were selected to analyze the residue, distribution, and environmental risk of organic contaminants in soil and groundwater. A total of 194 organic chemicals were detected in all soil and groundwater samples from the 20 sites. Eighty-eight constituents of concern (COCs) exceeded the comparison values of Regional Screening Levels (RSLs), and 80 % exceeded the RSLs by more than five times. The toxic effects of COCs in soil and groundwater were dominated by the carcinogenic risk, referred as "non-threshold". Benzene toluene ethylbenzene & xylene (BTEX) and chloroaliphatic hydrocarbons (CAHs) were the most prevalent at pesticide sites in YRD rather than pesticides, followed by chlorobenzene, chlorophenols, and polycyclic aromatic hydrocarbons (PAHs). CAHs and BTEX could penetrate up to 24 m, while the others were primarily limited to 12 m. Most pesticide production sites showed a great contamination depth of >8 m, some even deeper than 20 m, posing a great risk of contamination to the confined aquifer. Due to the close interconnection of soil with water bodies, the shallow groundwater and adjacent surface water resources are also susceptible to suffering from environmental risk. More than half of the pesticide production sites in the YRD consist primarily of low-permeable clay layers, making in-situ contamination remediation difficult. This study provides a basis for developing remediation technology for pesticide sites in YRD and an ecological reference for further cleaning production and green manufacturing in the pesticide industry.

Asbestos-Environment Pollution Characteristics and Health-Risk Assessment in Typical Asbestos-Mining Area.

Asbestos has been confirmed as a major pollutant in asbestos-mining areas that are located in western China. In general, asbestos-fibre dust will is released into the environment due to the effect of intensive industrial activities and improper environmental management, such that the health of residents in and around mining areas is jeopardised. A typical asbestos mining area served as an example in this study to analyse the content and fibre morphology of asbestos in soil and air samples in the mining area. The effects of asbestos pollution in and around the mining areas on human health were also assessed based on the U.S. Superfund Risk Assessment Framework in this study. As indicated by the results, different degrees of asbestos pollutions were present in the soil and air, and they were mainly concentrated in the mining area, the ore-dressing area, and the waste pile. The concentration of asbestos in the soil ranged from 0.3% to 91.92%, and the concentration of asbestos fibres in the air reached 0.008-0.145 f·cc-1. The results of the scanning-electron microscope (SEM) energy suggested that the asbestos was primarily strip-shaped, short columnar, and granular, and the asbestos morphology of the soils with higher degrees of pollution exhibited irregular strip-shaped fibre agglomeration. The excess lifetime cancer risk (ELCR) associated with the asbestos fibres in the air of the mining area was at an acceptable level (10-4-10-6), and 40.6% of the monitoring sites were subjected to unacceptable non-carcinogenic risks (HQ > 1). Moreover, the waste pile was the area with the highest non-carcinogenic risk, followed by the ore dressing area, a residential area, and a bare-land area in descending order. In the three scenarios of adult offices or residences in the mining area, adults' outdoor activities in the peripheral residence areas, and children's outdoor activities, the carcinogenic-and non-carcinogenic-risk-control values in the air reached 0.1438, 0.2225 and 0.1540 f·cc-1, and 0.0084, 0.0090 and 0.0090 f·cc-1, respectively. The results of this study will lay a scientific basis for the environmental management and governance of asbestos polluted sites in China.

Remediation technologies for neonicotinoids in contaminated environments: Current state and future prospects.

Neonicotinoids (NEOs) are synthetic insecticides with broad-spectrum insecticidal activity and outstanding efficacy. However, their extensive use and persistence in the environment have resulted in the accumulation and biomagnification of NEOs, posing significant risks to non-target organisms and humans. This review provides a summary of research history, advancements, and highlighted topics in NEOs remediation technologies and mechanisms. Various remediation approaches have been developed, including physiochemical, microbial, and phytoremediation, with microbial and physicochemical remediation being the most extensively studied. Recent advances in physiochemical remediation have led to the development of innovative adsorbents, photocatalysts, and optimized treatment processes. High-efficiency degrading strains with well-characterized metabolic pathways have been successfully isolated and cultured for microbial remediation, while many plant species have shown great potential for phytoremediation. However, significant challenges and gaps remain in this field. Future research should prioritize isolating, domesticating or engineering high efficiency, broad-spectrum microbial strains for NEO degradation, as well as developing synergistic remediation techniques to enhance removal efficiency on multiple NEOs with varying concentrations in different environmental media. Furthermore, a shift from pipe-end treatment to pollution prevention strategies is needed, including the development of green and economically efficient alternatives such as biological insecticides. Integrated remediation technologies and case-specific strategies that can be applied to practical remediation projects need to be developed, along with clarifying NEO degradation mechanisms to improve remediation efficiency. The successful implementation of these strategies will help reduce the negative impact of NEOs on the environment and human health.

Field study of microbial community structure and dechlorination activity in a multi-solvents co-contaminated site undergoing natural attenuation.

BTEX and chlorinated aliphatic hydrocarbons (CAHs) are the common pollutants found at contaminated sites, and natural attenuation (NA) of CAHs was widely observed where they coexist. In this work, the groundwater in a site co-contaminated with BTEX and CAHs was monitored for 1 year. The compositions and activities of the microfloras, especially dechlorinators and their relationships with the contaminants, geochemical properties, seasons and depth were evaluated. The results are consistent with the well-known NA conceptual model where CAHs are not able to stimulate the enrichment of dechlorinators alone, but BTEX does promote dechlorination. The higher temperature, rather than ORP in the deeper groundwater of the wet season became a key factor to promote the abundance of dechlorinators, but only when BTEX was available, indicating that the substrates from the BTEX biodegradation played an important role in the dechlorinator enrichment. The elevated ORP in the shallower groundwater exceeded the optimum conditions for reductive dechlorination and no significant seasonal variation of dechlorinators was found. The co-occurrence network revealed the cooperative interactions among the functional microfloras in which dechlorinators, BTEX degraders, and fermentative bacteria jointly promoted the dechlorination. These findings provided us a further understanding of the NA processes in a commingled plume.