Physical characterization using diffusion NMR spectroscopy.

NMR diffusion measurements (or dNMR) provide a powerful tool for analysis of solution organization and microgeometry of the environment by probing random molecular motion. Being a very versatile method, dNMR can be applied to a large variety of samples and systems. Here, a brief introduction into dNMR and a summary of recent advances in the field are presented. The research topics include restricted diffusion, anisotropic diffusion, polymer dynamics, solution structuring and dNMR method development. The dNMR studied systems include plants, cells (cell models), liquid crystals, polymer solutions, ionic liquids, supercooled solutions, untreated water, amino acid solutions and more. It is demonstrated how a variety of dNMR methods can be applied to a system to extract the data on particular structures present among, formed by or surrounding the diffusing particles. It is also demonstrated how dNMR methods can be developed to allow probing larger geometries, low sample concentrations and faster processes. Copyright © 2016 John Wiley & Sons, Ltd.

Investigating retention characteristics of a mixed-mode stationary phase and the enhancement of monolith selectivity for high-performance liquid chromatography.

The synthesis and chromatographic behavior of an analytical size mixed-mode bonded silica monolith was investigated. The monolith was functionalized by an in situ modification process of a bare silica rod with chloro(3-cyanopropyl)dimethyl silane and chlorodimethyl propyl phenyl silane solutions. These ligands were selected in order to combine both resonance and nonresonance π-type bonding within a single separation environment. Selectivity studies were undertaken using n-alkyl benzenes and polycyclic aromatic hydrocarbons in aqueous methanol and acetonitrile mobile phases to assess the methylene and aromatic selectivities of the column. The results fit with the linear solvent strength theory suggesting excellent selectivity of the column was achieved. Comparison studies were performed on monolithic columns that were functionalized separately with cyano and phenyl ligands, suggesting highly conjugated molecules were able to successfully exploit both of the π-type selectivities afforded by the two different ligands on the mixed-mode column.

Lipid order, saturation and surface property relationships: a study of human meibum saturation.

Tear film stability decreases with age however the cause(s) of the instability are speculative. Perhaps the more saturated meibum from infants may contribute to tear film stability. The meibum lipid phase transition temperature and lipid hydrocarbon chain order at physiological temperature (33 °C) decrease with increasing age. It is reasonable that stronger lipid-lipid interactions could stabilize the tear film since these interactions must be broken for tear break up to occur. In this study, meibum from a pool of adult donors was saturated catalytically. The influence of saturation on meibum hydrocarbon chain order was determined by infrared spectroscopy. Meibum is in an anhydrous state in the meibomian glands and on the surface of the eyelid. The influence of saturation on the surface properties of meibum was determined using Langmuir trough technology. Saturation of native human meibum did not change the minimum or maximum values of hydrocarbon chain order so at temperatures far above or below the phase transition of human meibum, saturation does not play a role in ordering or disordering the lipid hydrocarbon chains. Saturation did increase the phase transition temperature in human meibum by over 20 °C, a relatively high amount. Surface pressure-area studies showing the late take off and higher maximum surface pressure of saturated meibum compared to native meibum suggest that the saturated meibum film is quite molecularly ordered (stiff molecular arrangement) and elastic (molecules are able to rearrange during compression and expansion) compared with native meibum films which are more fluid agreeing with the infrared spectroscopic results of this study. In saturated meibum, the formation of compacted ordered islands of lipids above the surfactant layer would be expected to decrease the rate of evaporation compared to fluid and more loosely packed native meibum. Higher surface pressure observed with films of saturated meibum compared to native meibum suggests greater film stability especially under the high shear stress of a blink.

Selectivity in separation using π electron-rich stationary phases for the comprehensive two-dimensional analysis of café espresso.

The multidimensional high-performance liquid chromatography separations of the complex sample matrix found in café espresso coffee were completed on the propyl phenyl and butyl phenyl columns that contain 3 and 4 carbon atoms in the spacer chain, respectively. Phenyl type stationary phases are able to undergo unique π-π interactions with aromatic compounds. Previous works have found that there are differences in retention characteristics between these chain lengths and this was explored further here. It was found that when analysing the separations by quadrants, using a geometric approach to factor analysis and by measuring the normalised mean radius, subtle differences in the separations were observed and the butyl phenyl phase was more selective for the high to medium polarity species. However, there was very little difference in separation behaviour for the hydrophobic components within the coffee sample. Overall, the analysis of the entire separation showed very little difference.

Phenyl-type and C1 stationary phases for environmentally friendlier chromatography.

C1 and phenyl-type stationary phases were assessed in terms of their environmental impact on separations using as test solutes polycyclic aromatic hydrocarbons. Methanol (MeOH) and acetonitrile (ACN) mobile-phase gradients were employed. These stationary phases were examined to determine if different physical and chemical properties possessed by these surfaces decreased the organic solvent consumption, and yet maintained peak capacity. The cumulative energy demand (CED) was used to gauge the environmental impact of the separations. The separation of the polycyclic aromatic hydrocarbon test mixture using current methodologies (i.e. a C18/ACN combination) had a CED of 1.13 MJ-eq, and a peak capacity of 27 peaks (resolving 7 of 12 peak pairs with R(s)>1). In comparison, a butyl phenyl stationary phase with a methanol mobile phase had a peak capacity of 26, but with a CED of 0.670 MJ-eq. Monolithic columns containing C18 and C1 phases were also tested. A monolithic C18 column with MeOH had the lowest CED at 0.675 MJ-eq, a peak capacity of 28 peaks and good resolving power (resolving ten peak pairs with R(s)>1), suggesting that this is a viable option with respect to reducing environmental impact for these types of analyses.

An assessment of the retention behaviour of polycyclic aromatic hydrocarbons on reversed phase stationary phases--thermodynamic behaviour on C18 and phenyl-type surfaces.

The thermodynamic retention behaviour of a linear series of polycyclic aromatic hydrocarbons (PAHs) was investigated on C18 and selected phenyl-type reversed-phase stationary phases, namely C18, C18 Aqua, Propyl-phenyl and Synergi polar-RP stationary phases, using methanol mobile phases. The Propyl-phenyl stationary phase, despite having the lowest surface coverage, was found to exhibit significantly larger enthalpic interactions to the other Phenyl-type phase (Synergi polar-RP) even though this had a much higher surface coverage. This indicated that stronger interactions between the PAHs and the stationary phase ligands were occurring on the Propyl-phenyl phase. Evaluation of the elution band profile of the PAHs in the aqueous methanol mobile phase revealed fairly symmetrical bands for the C18, C18 Aqua and Synergi polar-RP, but severe peak tailing on the Propyl-phenyl phase. A change in mobile phase from methanol to acetonitrile improved the peak shape of the PAHs on the Propyl-phenyl phase, leading to the assumption that unfavourable pi-pi interactions were occurring between the electron-rich PAHs and the electron-rich phenyl rings of the Propyl-phenyl phase.

Retention of polycyclic aromatic hydrocarbons on propyl-phenyl stationary phases in reversed-phase high performance liquid chromatography.

A study on the retention of PAHs on three Propyl-phenyl stationary phases was conducted, assessing absolute retention, selectivity, retention correlation and thermodynamic behaviour. The chromatographic retention data revealed that each of the three Propyl-phenyl columns exhibited differences in absolute retention, however, comparison of the compensation temperatures derived from enthalpy-entropy compensation plots showed that the underlying processes responsible for the retention on these columns were the same.

Visualising viscous fingering in chromatography columns: high viscosity solute plug.

The interface between two fluids that have different viscosities and are percolating through a porous bed is unstable. Sooner or later, a flow instability termed viscous fingering (VF) develops. This phenomenon is important in chromatography because the solute plug does not have the same viscosity as the mobile phase. Because the sample is often much more viscous than the mobile phase, it is the interface at the rear of the sample band that is usually unstable. This situation is frequent in many modes of chromatography, e.g., in preparative and in multidimensional chromatography, in size exclusion chromatography, in frontal analysis, and in other physicochemical measurements (e.g., determination of adsorption isotherms and of mass transfer parameters). When the solute plug is more viscous than the mobile phase, we observed that the solute band compressed. When the viscosity contrast increased up to 0.30 cP, fingers appeared to trail behind the solute plug. The development of fingers then became more substantial as the viscosity contrast increased. To avoid effects associated with VF, the mobile phase and the solute plug should have nearly the same viscosity.

An assessment of the retention behaviour of polycyclic aromatic hydrocarbons on reversed phase stationary phases: selectivity and retention on C18 and phenyl-type surfaces.

In this manuscript the retention and selectivity of a set of linear and non-linear PAHs were evaluated on five different reversed-phase columns. These phases included C18 and C18 Aqua stationary phases, as well as three phenyl phases: Propyl-phenyl, Synergi polar-RP and Cosmosil 5PBB phase. Overall, the results revealed that the phenyl-type columns offered better separation performance for the linear PAHs, while the separation of the structural isomer PAHs was enhanced on the C18 columns. The Propyl-phenyl column was found to have the highest molecular-stationary phase interactions, as evidenced by the greatest rate of change in 'S' (0.71) as a function of the molecular weight in the PAH homologous series, despite having the lowest surface coverage (3% carbon load) (where S is the slope of a plot of logk versus the solvent composition). In contrast, the C18 Aqua column, having the highest surface coverage (15% carbon load) was found to have the second lowest molecular-stationary phase interactions (rate of change in S=0.61). Interestingly, the Synergi polar-RP column, which also is a phenyl stationary phase behaved more 'C18-like' than 'phenyl-like' in many of the tests undertaken. This is probably not unexpected since all five phases were reversed phase.

Visualising the onset of viscous fingering in chromatography columns.

Viscous fingering is an important fluid transport phenomenon that manifests itself when two fluids having different viscosities move in the same direction. Their interface is unstable and a complex fingering pattern may arise. This phenomenon is important in chromatography because it may lead to a decrease or even a failure in separations. The onset of viscous fingering was visually observed by packing a glass column with particles having the same refractive index as the mobile phase and injecting plugs of dye solutions having viscosities different from that of the mobile phase. Severe fingering effects are observed if the viscosity difference exceeds 0.17 cP. However, for smaller viscosity differences, band distortions are observed that may affect retention data, band efficiency, and band resolution. Careful attention should be paid to matching the mobile phase viscosity and that of the injection plug when accurate chromatographic information is required.

The surface activity of purified ocular mucin at the air-liquid interface and interactions with meibomian lipids.

PURPOSE: Ocular mucins are thought to contribute to the stability of the tear film by reducing surface tension. The purpose of this study was to compare the effect of different mucins and hyaluronic acid (HA) alone and mixed with meibomian lipids on the surface pressure at an air-liquid interface. METHODS: A Langmuir trough and Wilhelmy balance were used to measure and compare the surface activity of bovine submaxillary gland mucin (BSM), purified BSM, purified bovine ocular mucin and HA, and mixtures of these with meibomian lipids, phosphatidylcholine, and phosphatidylglycerol. Their appearance at the surface of an air-buffer interface was examined using epifluorescence microscopy. RESULTS: Purified ocular mucin had no surface activity even at concentrations that were 100 times more than normally occur in tears. By contrast, commercial BSM caused changes to surface pressure that were concentration dependent. The surface pressure-area profiles showed surface activity with maximum surface pressures of 12.3-22.5 mN/m depending on the concentration. Purified BSM showed no surface activity at low concentrations, whereas higher concentrations reached a maximum surface pressure of 25 mN/m. HA showed no surface activity, at low or high concentrations. Epifluorescence showed that the mucins were located at the air-buffer interface and changed the appearance of lipid films. CONCLUSION: Purified bovine ocular mucin and HA have no surface activity. However, despite having no surface activity in their own right, ocular mucins are likely to be present at the surface of the tear film, where they cause an increase in surface pressure by causing a compression of the lipids (a reorganization of the lipids) and alter the viscoelastic properties at the surface.

Molecular differences between deuterated and protonated polystyrenes using reversed-phase high-performance liquid chromatography.

Isotopic substitution is a technique used to highlight particular bonds within a molecule for kinetic, spectroscopic and structure analysis. It is presumed that although some properties such as stretching frequencies will not be the same for substituted analogues, the chemical interactions will not vary appreciably as a function of labelling. Reversed-phase liquid chromatography has been used to demonstrate that there are significant differences between the chromatographic behaviour of a sequence of deuterated and protonated oligomeric polystyrenes. Two-dimensional reversed-phase liquid chromatography was used to show that even the diasteromers of the oligomers (n = 5) have retention mechanisms that are dependent on the subtle changes to the molecular conformation and electronic structure, which are a consequence of deuteration.

Utilising retention correlation for the separation of oligostyrenes by coupled-column liquid chromatography.

The separation of n = 2-5 n-butyloligostyrenes has been illustrated by reversed-phase reversed-phase (RP-RP) coupled-column liquid chromatography. The coupled-column separation has been achieved by use of a C18 column with methanol as the mobile phase followed by a DiamondBond C18 column with acetonitrile (ACN) mobile phase. The DiamondBond C18 is a hybrid carbon clad zirconia (CCZ)-C18 stationary phase. Unlike a C18-carbon clad zirconia two-dimensional liquid chromatographic system, which is orthogonal, the C18 and DiamondBond C18 columns combination exhibit correlations based upon the molecular weight of n-butyloligostyrenes. Using an alternative strategy to two-dimensional liquid chromatography, the molecular weight dependence displayed by both the C18 column and DiamondBond C18 has been used to increase throughput or decrease analysis time in the analysis of the n-butyloligostyrenes. However, this is at the expense of a portion of the two-dimensional peak capacity displayed by the C18-carbon clad zirconia system.

Surface pressure measurements of human tears and individual tear film components indicate that proteins are major contributors to the surface pressure.

PURPOSE: Tear film stability has been associated with a low surface tension (high surface pressure), which has been attributed to a variety of tear film components. In this study, we examined the contribution of various tear proteins, mucin, and meibomian lipids to the surface pressure of human tears. METHODS: A Langmuir trough was used to measure and compare the surface activities of albumin, lipocalin, beta-lactoglobulin, lactoferrin, lysozyme, secretory IgA, mucin, meibomian lipid, and tears. RESULTS: All proteins exhibited surface activity. The surface pressure-area (Pi-A) profiles of most protein films at equilibrium surface pressure (Pieq) were sigmoidal and showed hysteresis between the expansion and compression phases of the cycle. Pieq of most proteins took 4-9 hours to occur. By contrast, the Pi-A profiles for meibomian lipid films were hyperbolic rather than sigmoidal and had little hysteresis, and Pieq was attained within 1 hour. The Pi-A profiles of mucin films showed mostly hyperbolic characteristics with small hysteresis. The Pi-A profiles of films of tears were sigmoidal, showed strong hysteresis, and reached Pieq at about 5 hours. Partitioning of the proteins and whole tears into the subphase also occurred. CONCLUSION: Comparison between the dynamic Pi-A profiles of tears and those of individual tear film components shows that tear film proteins not only are capable of surface activity but also are major contributors to the surface activity of the tear film.

Interactions of sodium montmorillonite with poly(acrylic acid).

The chemical-structural modifications of the natural clay sodium montmorillonite during interaction with poly(acrylic acid) were studied mainly by X-ray photoemission spectroscopy. Samples of modified montmorillonite were prepared from the reaction of sodium montmorillonite ( approximately 0.5 g) and an aqueous solution of poly(acrylic acid) (pH approximately 1.8, 50 g) at varying temperatures. X-ray diffraction indicated that the montmorillonite interlayer space ( approximately 13 A), formed by regular stacking of the silicate layers (dimension approximately 1x1000 nm), expanded to approximately 16 A as the reaction was carried out at room temperature and at 30 degrees C. At 60 degrees C, the interlayer space further expanded to approximately 20 A. The results of X-ray photoemission spectroscopy indicated that poly(acrylic acid) molecules exchange sodium ions on the surface of the silicate layers. These combined results allowed development of a reaction model that explains the dependency of the interlayer expansion with temperature. Information concerning the surface chemical reactions and systematic increases in the interlayer distances is particularly useful if montmorillonite and poly(acrylic acid) are to be used for formation of nanocomposite materials.

Post column derivatisation analyses review. Is post-column derivatisation incompatible with modern HPLC columns?

Post Column derivatisation (PCD) coupled with high performance liquid chromatography or ultra-high performance liquid chromatography is a powerful tool in the modern analytical laboratory, or at least it should be. One drawback with PCD techniques is the extra post-column dead volume due to reaction coils used to enable adequate reaction time and the mixing of reagents which causes peak broadening, hence a loss of separation power. This loss of efficiency is counter-productive to modern HPLC technologies, -such as UHPLC. We reviewed 87 PCD methods published from 2009 to 2014. We restricted our review to methods published between 2009 and 2014, because we were interested in the uptake of PCD methods in UHPLC environments. Our review focused on a range of system parameters including: column dimensions, stationary phase and particle size, as well as the geometry of the reaction loop. The most commonly used column in the methods investigated was not in fact a modern UHPLC version with sub-2-micron, (or even sub-3-micron) particles, but rather, work-house columns, such as, 250 × 4.6 mm i.d. columns packed with 5 µm C18 particles. Reaction loops were varied, even within the same type of analysis, but the majority of methods employed loop systems with volumes greater than 500 µL. A second part of this review illustrated briefly the effect of dead volume on column performance. The experiment evaluated the change in resolution and separation efficiency of some weak to moderately retained solutes on a 250 × 4.6 mm i.d. column packed with 5 µm particles. The data showed that reaction loops beyond 100 µL resulted in a very serious loss of performance. Our study concluded that practitioners of PCD methods largely avoid the use of UHPLC-type column formats, so yes, very much, PCD is incompatible with the modern HPLC column.

Tuning a Parallel Segmented Flow Column and Enabling Multiplexed Detection.

Active flow technology (AFT) is new form of column technology that was designed to overcome flow heterogeneity to increase separation performance in terms of efficiency and sensitivity and to enable multiplexed detection. This form of AFT uses a parallel segmented flow (PSF) column. A PSF column outlet end-fitting consists of 2 or 4 ports, which can be multiplexed to connect up to 4 detectors. The PSF column not only allows a platform for multiplexed detection but also the combination of both destructive and non-destructive detectors, without additional dead volume tubing, simultaneously. The amount of flow through each port can also be adjusted through pressure management to suit the requirements of a specific detector(s). To achieve multiplexed detection using a PSF column there are a number of parameters which can be controlled to ensure optimal separation performance and quality of results; that is tube dimensions for each port, choice of port for each type of detector and flow adjustment. This protocol is intended to show how to use and tune a PSF column functioning in a multiplexed mode of detection.

The effects of novel amphipathic block copolymers on stabilization of the rat tear film.

PURPOSE: To determine whether various novel amphipathic polymers could be used to stabilize the tear film of the rat. The rheologic properties of these polymers were examined to investigate whether particular structural or physical characteristics improve the stability of the tear film. METHODS: Amphipathic polymers or particular phospholipids were mixed with a test solution of tears and saline and applied to the clean, dry corneal surface of a rat. The specular reflection of the tear film was observed at high magnification and recorded. For each of the polymers or lipids, the effects on surface regularity and tear break-up time were compared. After the experiments, histologic sections of the tested eyes were prepared and examined for acute cytotoxic effects on the cornea and ocular conjunctiva. RESULTS: Tear film break-up time was markedly affected by differences in polymer structure. Copolymers consisting of separate hydrophobic and hydrophilic regions appeared to be the best stabilizers. No acute cytotoxic effects were observed in histologic sections of corneas to which the polymers had been applied. CONCLUSIONS: Amphipathic polymers can be designed to increase tear film stability. Increased tear film stability occurred more readily with copolymers, possibly through their interaction with both lipid and aqueous tear components.

Retention behaviour of polystyrene oligomers in reversed-phase liquid chromatography.

Reversed-phase liquid chromatography (RPLC) was employed to investigate the behaviour of low-molecular-mass polystyrene oligomers with three different end groups, n-butyl, sec-butyl, and tert.-butyl polystyrenes. Exothermodynamic retention studies on the polystyrene oligomers were carried out using a C18 stationary phase column and 100% methanol mobile phase over the temperature range 15 to 60 degrees C. The resulting van't Hoff plots were linear over the entire temperature range for all three end group polystyrenes. Enthalpy-entropy compensation (EEC) showed a linear compensation for the higher-order oligomers, but was non-linear for the lower-order oligomers, indicating a change in the mechanism of retention. Differences in the extent of retention for each of the three end groups were also apparent. The ramifications of these differences are discussed.

Two dimensional reversed-phase-reversed-phase separations isomeric separations incorporating C18 and carbon clad zirconia stationary phases.

Informational theory and a geometric approach to factor analysis were employed to evaluate the degree of orthogonality of a two-dimensional reversed-phase-reversed-phase chromatographic system. The system incorporated a C18 column as one dimension and a carbon clad zirconia column as the second dimension. In order to study the resolving power of this system, the separation of a sample matrix containing an artificial mix of 32 isomers (structural and diastereoisomers) was evaluated. Using this system, between 25 and 28 of the 32 isomers could be separated, depending on the mobile phase combinations--with resolution that could not possibly be achieved in a single one dimensional separation. The results from this study indicate that in order to fully evaluate the resolving power of a 2D system multiple methods of analysis are most appropriate. This becomes increasingly important when the sample contains components that are very closely related and the retention of solutes is clustered in one quadrant of the 2D space. Ultimately, the usefulness of the 2D separation is determined by the goals of analyst.