Fenton's pre-treatment of mature landfill leachate.

The aim of this study was to check the effectiveness of the Fenton's reagent (Fe2+ + H2O2 + H+) for the pre-treatment of a municipal landfill leachate with the objective of improving its overall biodegradability, evaluated in terms of BOD5/COD ratio, up to a value compatible with biological treatment. The leachate came from a municipal sanitary landfill located in southern Italy and the average values of its main parameters were: pH=8.2; COD=10,540 mgl(-1); BOD5=2,300 mgl(-1); TOC=3,900 mgl(-1); NH4-N=5210 mgl(-1); conductivity=45,350 microScm(-1); alkalinity=21,470 mgl(-1) CaCO3. The effect of initial pH value on the pre-treatment effectiveness was evaluated by titrating the amount of acidic by-products formed. The extent of leachate oxidation was monitored and controlled by both pH and redox potential measurements. The best operational conditions for achieving the desired goal (i.e., BOD5/COD> or =0.5) resulted: Fe2+=275 mgl(-1); H2O2=3,300 mgl(-1); initial pH=3; reaction time=2 h. At the end of the Fenton's pre-treatment, in order to permit a subsequent biological treatment, residual ferric ions were removed increasing the pH up to 8.5 by adding 3 gl(-1) of Ca(OH)2 and 3 mgl(-1) of a cationic polyelectrolyte, the latter as an aid to coagulation. This final step also resulted in a further modest removal of residual COD due to co-precipitation phenomena.

Treatment options for tannery wastewater II: integrated chemical and biological oxidation.

This is the second of two papers each dealing with a specific technological option for replacing the Fenton's reagent with simpler processes for treating industrial wastewater. In particular, the paper reports the results of an investigation aimed to check, at lab scale, the effectiveness of an alternative wastewater treatment combining biological degradation and chemical oxidation with ozone. The treatment was carried out in a lab scale hybrid reactor fed with the biological stage effluent of a plant treating the wastewater of a large tanning district in Central Italy whose residual COD result still higher than the Italian COD Maximum Allowable Concentration (MAC) value (i.e., 160 mgO2/L) The results are very promising, considering that a removal efficiency of 41% (as COD) has been achieved by treating an influent characterized by a COD content fully biorefractory. In addition, the proposed treatment presents the significant advantage of no additional sludge production, as happens with commonly utilized tertiary processes (i.e. Fenton), that is characterized by high chemical sludge production.