High-performance plasmonic refractive index sensors via synergy between annealed nanoparticles and thin films.

Plasmonic nanostructure-based refractive index (RI) sensors are the core component of biosensor systems and play an increasingly important role in the diagnosis of human disease. However, the costs of traditional plasmonic RI sensors are not acceptable to everyone due to their expensive fabrication process. Here, a novel low-cost and high-performance visible-light RI sensor with a particle-on-film configuration was experimentally demonstrated. The sensor was fabricated by transferring annealed Au nanoparticles (NPs) onto a thin gold film with polymethyl methacrylate (PMMA) as a support. RI sensitivities of approximately 209 nm/RIU and 369 nm/RIU were achieved by reflection and transmission spectrum measurements, respectively. The high sensitivity is due to the strong plasmon-mediated energy confinement within the interface between the particles and the film. The possibility of wafer-scale production and high working stability achieved by the transfer process, together with the high sensitivity to the environmental RI, provides an extensive impact on the realization of universal biosensors for biological applications.

DNLC: differential network local consistency analysis.

BACKGROUND: The biological network is highly dynamic. Functional relations between genes can be activated or deactivated depending on the biological conditions. On the genome-scale network, subnetworks that gain or lose local expression consistency may shed light on the regulatory mechanisms related to the changing biological conditions, such as disease status or tissue developmental stages. RESULTS: In this study, we develop a new method to select genes and modules on the existing biological network, in which local expression consistency changes significantly between clinical conditions. The method is called DNLC: Differential Network Local Consistency. In simulations, our algorithm detected artificially created local consistency changes effectively. We applied the method on two publicly available datasets, and the method detected novel genes and network modules that were biologically plausible. CONCLUSIONS: The new method is effective in finding modules in which the gene expression consistency change between clinical conditions. It is a useful tool that complements traditional differential expression analyses to make discoveries from gene expression data. The R package is available at https://cran.r-project.org/web/packages/DNLC.

Bioinspired nanocomposites film with highly-aligned silicon carbide nanowires and polyvinyl alcohol for mechanical and thermal anisotropy.

This work reports a bioinspired anisotropic nanocomposite by polar solution assisted mechanical stretching method, consisting of polyvinyl alcohol (PVA) and silicon carbide nanowires (SiCNWs) with aligned morphology in one direction. Inspired by the structural mimicry of myofibers, in which the uniaxial mechanical property of materials can be improved evidently, highly-aligned SiCNWs and PVA chains that interact using intermolecular force can be obtained. Hysteresis is observed and reversible deformation occurs while tensile-relaxation cycles are applied to the 100% stretched SiCNWs/PVA nanocomposites. The nanocomposites exhibit excellent properties and the tensile strength of 100% stretched SiCNWs/PVA nanocomposites is 188.30 ± 4.2 MPa and elastic modulus is 6.95 GPa, which are increased by 421.90% and 581.37% compared with pure PVA. Finite element simulation of fracture mechanism shows good agreement with the experimental results. An improvement of thermal conductivity is also achieved in well-aligned SiCNWs/PVA. The work imitates the structure of mammal muscle and also has great potential for the macroscopic application of one-dimensional nanomaterials as super flexible heat dissipation materials.

The Influence of Precipitated Particles on the Grain Size in Cold-Rolled Al-Mn Alloy Foils upon Annealing at 100-550 °C.

The Al-Mn alloy heat exchanger fin production process includes a brazing treatment at s high temperature of 600 °C, in which coarse grains are preferred for their high resistance to deformation at elevated temperatures by decreasing the grain boundary sliding. In this study, Al-1.57Mn-1.57Zn-0.58Si-0.17Fe alloy foils cold rolled by 81.7% (1.1 mm in thickness) and 96.5% (0.21 mm in thickness) were annealed at 100-550 °C for 1 h to investigate their recrystallization behavior, grain sizes, and precipitates by increasing the annealing temperature, using micro-hardness measurement, electron back-scattered diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The micro-hardness results showed that the recrystallization finishing temperatures for the two samples were almost the same, 323 ± 2 °C. The EBSD results showed that when the annealing temperature decreased from 550 to 400 °C, the recrystallized grain sizes of the two samples were nearly identical-both increased slightly. Further decreasing the annealing temperature from 400 to 330 °C caused the grain sizes to increase more, with the thinner foil sample having a more significant increase. The SEM and TEM observations showed that the micron-sized primary-phase remained unchanged during the annealing process. The nano-sized secondary phase precipitates formed during the hot-rolling process experienced a coarsening and dissolving process upon annealing. The particle size of the secondary phase increased from 32 nm to 44 nm and the area fraction decreased from 4.2% to 3.8%. The nucleation analysis confirmed that the large primary-phase could act as a nucleation site through particle stimulated nucleation (PSN) mode. The relatively dense secondary phase precipitates with small sizes at lower temperatures could provide higher Zener drag to the grain boundaries, leading to fewer nuclei and thereafter coarser grains. The coarsening of the recrystallized grains in the foils could be implemented through thickness reduction and/or precipitation processes to form densely distributed nano-sized precipitates.

Monitoring HIV drug resistance using early warning indicators in China: results from a pilot survey conducted in 2008.

Robust programmatic monitoring of factors associated with the emergence of human immunodeficiency virus (HIV) drug resistance is an essential component of antiretroviral therapy (ART) program evaluation and treatment optimization. China piloted World Health Organization HIV drug resistance early warning indicators to assess the feasibility and usefulness of results. Overall, early warning indicator monitoring showed high levels of appropriate ART prescribing, low rates of loss to follow-up 12 months after ART initiation, and high rates of retention of first-line ART at 12 months. On-time drug pick-up, which may signal treatment interruptions, was identified as a challenge. HIV drug resistance early warning indicator monitoring provides a valuable assessment of ART service delivery, and its application will be scaled up throughout China.

[Survival analysis on 3103 HIV/AIDS patients receiving antiretroviral treatment in Dehong prefecture, Yunnan province].

OBJECTIVE: To determine the survival rate of HIV/AIDS patients after receiving free antiretroviral treatment in Dehong prefecture, Yunnan province. METHODS: A retrospective cohort analysis was conducted on all the HIV/AIDS patients aged over 16 years who had started antiretroviral treatment during January 2007 throughout December 2009 in Dehong prefecture. RESULTS: A total of 3103 HIV/AIDS patients had received antiretroviral treatment during the study period. Among them, the mean age was (36.0 ± 9.9) years and 62.4% were males. 66.2% of them were infected with HIV through heterosexual transmission, and the mean treatment follow-up time was 21.7 months. Most patients well complied with the treatment, i.e., the average times of not taking the medicine were less than 5 per month. The cumulative survival rate of antiretroviral treatment after 1, 2, 3, 4, and 5 years were 0.95, 0.94, 0.93, 0.92, and 0.92, respectively. Data from the Cox proportional hazard regression model analysis indicated that, after adjustment for age, gender, and marital status, the baseline CD4(+)T cell counts and transmission route could significantly predicate the rates of survival. Those who were with baseline CD4(+)T cell counts as 200 - 350/mm(3)were less likely to die of AIDS than those with CD4(+) T cell counts < 200/mm(3) (Hazard Ratio or HR = 0.16, 95%CI: 0.09 - 0.28), and HIV-infected through mother-to-child transmission or routes other than heterosexual transmission were less likely to die of AIDS than through injecting drug use (HR = 0.35, 95%CI: 0.13 - 1.00). CONCLUSION: Free antiretroviral treatment had significantly improved the survival of HIV/AIDS patients. Earlier initiation of antiretroviral treatment was likely to have achieved better survival effects.