RESUMEN
Diode lasers with high beam quality and high power have many promising applications. However, high beam quality is always in conflict with high power. In this Letter, we theoretically and experimentally confirm the mode instability property of supersymmetric structures at higher operating currents. Meanwhile, we propose a loss-tailoring diode laser based on a supersymmetric structure, which enables the higher-order lateral modes to obtain higher losses, raises the excitation threshold of the higher-order lateral modes, and achieves a stable fundamental-lateral-mode output at higher current operation. The device obtained a quasi-single-lobe lateral far-field distribution with the full width at half maximum (FWHM) of 7.58° at 350â mA under room temperature, which is a 65% reduction compared to the traditional Fabry-Perot (FP) diode lasers. Moreover, the M2 of 2.181@350â mA has an improvement of about 37% over traditional FP and supersymmetric structure lasers.
RESUMEN
Casuarina glauca is an important coastal protection forest species, which is exposed to high salt stress all year round. Arbuscular mycorrhizal fungi (AMF) can promote the growth and salt tolerance of C. glauca under salt stress. However, the effects of AMF on the distribution of Na+ and Cl- and the expression of related genes in C. glauca under salt stress need to be further explored. This study explored the effects of Rhizophagus irregularis on plant biomass, the distribution of Na+ and Cl-, and the expression of related genes in C. glauca under NaCl stress through pot simulation experiments. The results revealed that the mechanisms of Na+ and Cl- transport of C. glauca under NaCl stress were different. C. glauca took a salt accumulation approach to Na+, transferring Na+ from roots to shoots. Salt accumulation of Na+ promoted by AMF was associated with CgNHX7. The transport mechanism of C. glauca to Cl- might involve salt exclusion rather than salt accumulation, and Cl- was no longer transferred to shoots in large quantities but started to accumulate in roots. However, AMF alleviated Na+ and Cl- stress by similar mechanisms. AMF could promote salt dilution of C. glauca by increasing biomass and the content of K+, compartmentalizing Na+ and Cl- in vacuoles. These processes were associated with the expression of CgNHX1, CgNHX2-1, CgCLCD, CgCLCF, and CgCLCG. Our study will provide a theoretical basis for the application of AMF to improve salt tolerance in plants.
Asunto(s)
Micorrizas , Micorrizas/metabolismo , Sodio/metabolismo , Cloruro de Sodio/farmacología , Raíces de Plantas/metabolismo , Estrés Salino , Plantas/metabolismo , Canales de CloruroRESUMEN
Arbuscular mycorrhizal fungi (AMF) promote plants to absorb more water and nutrients and improve their stress resistance. As the main signal transducer, the mitogen-activated protein kinase (MAPK) cascade plays a vital role in drought stress. However, how the MAPK family genes of mycorrhizal plants respond to stress is still not clear. Our study analyzed physiological indexes and expression profiles of MAPK family genes of Populus simonii × P. nigra under two inoculation treatments (inoculated with or without Rhizophagus irregularis) and two water conditions (well-watered or drought stress). The results showed that the stronger photosynthesis of mycorrhizal plants may be mediated by MAPK genes induced by AMF. Mycorrhizal plants showed lower oxidative damage and drought sensitivity. Mycorrhiza downregulated the expression of PsnMAPK7-2, PsnMAPK16-1, PsnMAPK19-2, and PsnMAPK20-2 which negatively regulate drought tolerance and induced specific PsnMAPKs in roots which activate transcription factors to regulate downstream gene expressions, enhancing drought tolerance. This is the first time to identify part of the MAPK gene family of P. simonii × P. nigra at the genome level and study MAPK genes in mycorrhizal forest trees. This is helpful to understand the function of the MAPK gene family in response to drought of mycorrhizal plants and lays a foundation for afforestation by using mycorrhizal saplings.
Asunto(s)
Micorrizas , Populus , Micorrizas/fisiología , Populus/genética , Populus/metabolismo , Resistencia a la Sequía , Fotosíntesis/genética , Sequías , Agua/metabolismoRESUMEN
AIMS: This study explored the specific molecular mechanism of Laccaria bicolor to help Populus trichocarpa resist infection by Botryosphaeria dothidea. METHODS AND RESULTS: Transcriptome technology was used to sequence P. trichocarpa under disease stress, and a total of 6379 differentially expressed genes (DEGs) were identified. A total of 536 new DEGs were induced by L. bicolor during the infection of B. dothidea. L. bicolor helps to prevent and alleviate the infection of B. dothidea by regulating related genes in the cell wall pathway, signal transduction pathway, disease-resistant protein synthesis pathway and antioxidant enzyme synthesis pathway of P. trichocarpa. CONCLUSION: The inoculation of L. bicolor can regulate the expression of genes in the cell wall pathway and enhance the physical defense capabilities of plants. Under disease stress conditions, L. bicolor can regulate signal transduction pathways, disease-resistant related pathways and reactive oxygen species (ROS) clearance pathways to help P. trichocarpa alleviate the disease. SIGNIFICANCE AND IMPACT OF THE STUDY: The research reveals the mechanism of L. bicolor inducing resistance to canker of P. trichocarpa from the molecular level and provides a theoretical basis for the practical application of mycorrhizal fungi to improve plant disease resistance.
Asunto(s)
Ascomicetos , Laccaria , Populus , Ascomicetos/genética , Laccaria/fisiología , Populus/genéticaRESUMEN
In this study, we explore a new method based on color variation data to derive the kinetics of the entire process of the hydration of alkali-activated slag (AAS). Using this image analysis technique, we can monitor the induction period that cannot be observed using conventional microcalorimetry techniques. Color variation was recorded across a sequence of 9999 images, which were processed via MATLAB software package. Further, an average pixel value (APV) was determined to represent the color in each image. Reaction parameters, such as color variation velocity v(t), reaction speed ε(t), and hydration degree α(t), that govern the entire hydration process were determined. On the basis of the reaction parameters and a Krstulovic-Dabic kinetic model, integral and differential equations were derived to simulate the three basic processes of AAS hydration. Equations describing the reaction kinetics of AAS with solutions of three different concentrations of NaOH were extracted using this method.
RESUMEN
The output characteristics, modal properties, far-field profiles, and dynamic modulation responses of semiconductor lasers with surface higher-order gratings fabricated by the standard photolithography are presented. Single-mode semiconductor lasers with 20th- and 37th-order gratings for the 1.55 µm wavelength range are realized. The single-mode semiconductor lasers with 20th-order gratings have lower threshold currents and higher slope efficiencies than those with 37th-order gratings. The surface higher-order grating placed closed to the output facet can deteriorate the vertical far-field profile of the semiconductor laser. However, the properties of the semiconductor laser's single-mode operation are not affected by the surface higher-order grating's position in the ridge waveguide. The -3 dB bandwidth of these single-mode semiconductor lasers can achieve 9 GHz at 100 mA, which is the highest, to the best of our knowledge, for such a kind of single-mode semiconductor laser with a surface higher-order grating.
RESUMEN
High-power high-brightness super large optical cavity laser diodes with an optimized epitaxial structure are investigated at the wavelength of 980 nm range. The thicknesses of P- and N-waveguides are prudently chosen based on a systematic consideration about mode characteristics and vertical far-field divergences. Broad area laser diodes show a high internal quantum efficiency of 98% and a low internal optical loss of 0.58 cm-1. The ridge-waveguide laser with 7 µm ridge and 3 mm cavity yields 1.9 W single spatial mode output with far-field divergence angles of 6.8° in lateral and 11.5° in vertical at full width at half maximum under 2 A CW operating current. The corresponding M2 values are 1.77 and 1.47 for lateral and vertical, respectively, and the corresponding brightness is 76.8 MWâ§cm-2â§sr-1. The far-field divergence angles with 95% power content are in the range of 24.7° to 26.1° across the whole measured range.
RESUMEN
An eight-channel laser array with 100 GHz channel spacing based on surface-slotted structures is demonstrated. Wavelength selection is realized by using a group of micrometer-order slots fabricated by standard lithography technology. An output power of over 14 mW and a side-mode suppression ratio of better than 35 dB for each laser within the array are achieved. A laser array without tuning for 100 GHz channel spacing by standard lithography was realized for the first time, to the best of our knowledge. The laser array can be used to enhance the capacity of communication links and provides a promising light source for photonic-integrated circuits.
RESUMEN
Introduction: Saline-alkali stress seriously endangers the normal growth of Populus simonii×P. nigra. Arbuscular mycorrhizal (AM) fungi can enhance the saline-alkali tolerance of plants by establishing a symbiotic relationship with them. Methods: In this study, a pot experiment was conducted to simulate a saline-alkali environment where Populus simonii×P. nigra were inoculated with Funneliformis mosseae to explore their effects on the saline-alkali tolerance of Populus simonii×P. nigra. Results and Discussion: Our results show that a total of 8 NHX gene family members are identified in Populus simonii×P. nigra. F. mosseae regulate the distribution of Na+ by inducing the expression of PxNHXs. The pH value of poplar rhizosphere soil is reduced, result in the promote absorption of Na+ by poplar, that ultimately improved the soil environment. Under saline-alkali stress, F. mosseae improve the chlorophyll fluorescence and photosynthetic parameters of poplar, promote the absorption of water, K+ and Ca2+, thus increase the plant height and fresh weight of aboveground parts, and promote the growth of poplar. Our results provide a theoretical basis for further exploring the application of AM fungi to improve the saline-alkali tolerance of plants.
RESUMEN
Poplars can be harmed by poplar canker. Inoculation with mycorrhizal fungi can improve the resistance of poplars to canker, but the molecular mechanism is still unclear. In this study, an aseptic inoculation system of L. bicolor-P. trichocarpa-B. dothidea was constructed, and transcriptome analysis was performed to investigate regulation by L. bicolor of the expression of genes in the roots of P. trichocarpa during the onset of B. dothidea infection, and a total of 3022 differentially expressed genes (DEGs) were identified. Weighted correlation network analysis (WGCNA) was performed on these DEGs, and 661 genes' expressions were considered to be affected by inoculation with L. bicolor and B. dothidea. Gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses showed that these 661 DEGs were involved in multiple pathways such as signal transduction, reactive oxygen metabolism, and plant-pathogen interaction. Inoculation with L. bicolor changed the gene expression pattern of the roots, evidencing its involvement in the disease resistance response of P. trichocarpa. This research reveals the mechanism of L. bicolor in inducing resistance to canker of P. trichocarpa at the molecular level and provides a theoretical basis for the practical application of mycorrhizal fungi to improve plant disease resistance.
RESUMEN
Casuarina glauca grows in coastal areas suffering long-term damage due to high salt stress. Arbuscular mycorrhizal fungi (AMF) can colonize their roots to alleviate the effects of salt stress. However, the specific molecular mechanism still needs to be further explored. Our physiological and biochemical analysis showed that Rhizophagus irregularis inoculation played an important role in promoting plant growth, regulating ion balance, and changing the activity of antioxidant enzymes. Transcriptome analysis of roots revealed that 1827 differentially expressed genes (DEGs) were affected by both R. irregularis inoculation and NaCl stress. The enrichment of GO (Gene Ontology) and KEGG (Kyoto Encyclopedia of Genes and Genomes) showed that most of these DEGs were significantly enriched in ion transport, antioxidant enzyme activity, carbohydrate metabolism, and cell wall. HAK5, KAT3, SKOR, PIP1-2, PER64, CPER, GLP10, MYB46, NAC43, WRKY1, and WRKY19 were speculated to play the important roles in the salt tolerance of C. glauca induced by R. irregularis. Our research systematically revealed the effect of R. irregularis on the gene expression of C. glauca roots under salt stress, laying a theoretical foundation for the future use of AMF to enhance plant tolerance to salt stress.
RESUMEN
Amorphous silicon nitride (α-SiN x ) films were coated on a photonic crystal-laser diode by the radio frequency magnetron sputtering method. Sputtering deposition conditions were changed to obtain α-SiN x films with different properties. The optical parameters and morphologies of the products were systemically characterized by spectroscopic ellipsometry fitting, energy-dispersive X-ray spectroscopy, atomic force microscopy, and performance of LDs coated with α-SiN x films were tested at 25 °C. Physical mechanisms of sputtering were explained in detail. α-SiN x with a band gap of 4.4 eV and a refractive index of 2.03 at 980 nm were grown. The extinction coefficient equal to 0 at 980 nm, and the surface morphology tended to be homogeneous and dense. The main influencing factors related to the catastrophic optical mirror damage (COMD) phenomenon were investigated. Then plasma pretreatment was implemented to eliminate defects and improve the cavity surface quality and further optimized by measuring the intensity of photoluminescence. Afterward, a rapid annealing method was also carried out to improve coating performance. Finally, α-SiN x acted as a passivation layer in the antireflection film coated on the LD facet, and the COMD threshold increased from 5 to 15.2 W, which led to a higher reliability than nonoptimized LDs and elimination of the COMD phenomenon.