RESUMEN
Current high-efficiency organic solar cells (OSCs) are generally fabricated in an inert atmosphere that limits their real-world scalable manufacturing, while the efficiencies of air-processed OSCs lag far behind. The impacts of ambient factors on solar cell fabrication remain unclear. In this work, the effects of ambient factors on cell fabrication are systematically investigated, and it is unveiled that the oxidation and doping of organic light absorbers are the dominant reasons causing cell degradation when fabricated in air. To address this issue, a new strategy for fabricating high-performance air-processed OSCs by introducing an antioxidant additive (4-bromophenylhydrazine, BPH) into the precursor solutions, is developed. BPH can effectively inhibit oxygen infiltration from the ambient to the photoactive layer and suppress trap formation caused by oxidation. Compared with conventional air-processed OSCs, this strategy remarkably increases the cell power conversion efficiency (PCE) from 16.7% to 19.3% (independently certified as 19.2%), representing the top value of air-processed OSCs. Furthermore, BPH significantly improves the operational stability of the cells in air by two times with a T80 lifetime of over 500 h. This study highlights the potential of using antioxidant additives to fabricate high-efficiency and stable OSCs in air, significantly promoting the industrialization of OSCs.
RESUMEN
Organic semiconductors (e.g., PCBM and IDIC) frequently serve as interface passivants for perovskite solar cells (PSCs) due to their beneficial passivation effects on perovskite interfaces. However, their passivation to the interiors of perovskite films is greatly limited by their poor solubility in polar solvents and compatibility issues. Here the facile synthesis of organic semiconductor nanoparticle (NP) passivants that readily disperse in perovskite inks is reported. Adding these NPs into perovskite inks not only modulates perovskite crystallization, improves film quality and conductivity, but also achieves holistic bulk film passivation. Consequently, blade-coated p-i-n PSCs with ICBA NPs achieve an impressive efficiency of 25.1% (independently certified as 25.0%), the highest reported value for air-processed PSCs irrespective of fabrication methods or device structures. This work develops a novel approach for effective and holistic perovskite passivation by converting conventional passivants to perovskite-compatible NPs, paving the way for more efficient and stable perovskite solar devices.