RESUMEN
Heterogeneous catalysis involves solid-state catalysts, among which metal nanoparticles occupy an important position. Unfortunately, no two nanoparticles from conventional synthesis are the same at the atomic level, though such regular nanoparticles can be highly uniform at the nanometer level (e.g., size distribution â¼5%). In the long pursuit of well-defined nanocatalysts, a recent success is the synthesis of atomically precise metal nanoclusters protected by ligands in the size range from tens to hundreds of metal atoms (equivalently 1-3 nm in core diameter). More importantly, such nanoclusters have been crystallographically characterized, just like the protein structures in enzyme catalysis. Such atomically precise metal nanoclusters merge the features of well-defined homogeneous catalysts (e.g., ligand-protected metal centers) and enzymes (e.g., protein-encapsulated metal clusters of a few atoms bridged by ligands). The well-defined nanoclusters with their total structures available constitute a new class of model catalysts and hold great promise in fundamental catalysis research, including the atomically precise size dependent activity, control of catalytic selectivity by metal structure and surface ligands, structure-property relationships at the atomic-level, insights into molecular activation and catalytic mechanisms, and the identification of active sites on nanocatalysts. This Review summarizes the progress in the utilization of atomically precise metal nanoclusters for catalysis. These nanocluster-based model catalysts have enabled heterogeneous catalysis research at the single-atom and single-electron levels. Future efforts are expected to achieve more exciting progress in fundamental understanding of the catalytic mechanisms, the tailoring of active sites at the atomic level, and the design of new catalysts with high selectivity and activity under mild conditions.
RESUMEN
This work presents the synthesis and intriguing photoluminescence of the Au42(PET)32 (PET = 2-phenylethanethiolate) nanocluster (NC). The Au42(PET)32 NC exhibits dual emission at 875 and 1040 nm, which are revealed to be fluorescence and phosphorescence, respectively. The emission quantum yield (QY) of Au42(PET)32 in dichloromethane is 11.9% at room temperature in air, which is quite rare for thiolate-protected Au NCs. When Au42(PET)32 NCs are embedded in polystyrene films (solid state), the fluorescence was dramatically suppressed while the phosphorescence was significantly enhanced. This divergent behavior is explained by dipolar interaction-induced enhancement of intersystem crossing from singlet to triplet excited state.
Asunto(s)
Cloruro de Metileno , Poliestirenos , Temperatura , Espectrometría de FluorescenciaRESUMEN
This work investigates the critical factors impacting electrochemical CO2 reduction reaction (CO2 RR) using atomically precise Au nanoclusters (NCs) as electrocatalysts. First, the influence of size on CO2 RR is studied by precisely controlling NC size in the 1-2.5â nm regime. We find that the electrocatalytic CO partial current density increases for smaller NCs, but the CO Faradaic efficiency (FE) is not directly associated with the NC size. This indicates that the surface-to-volume ratio, i.e. the population of active sites, is the dominant factor for determining the catalytic activity, but the selectivity is not directly impacted by size. Second, we compare the CO2 RR performance of Au38 isomers (Au38 Q and Au38 T) to reveal that structural rearrangement of identical size NCs can lead to significant changes in both CO2 RR activity and selectivity. Au38 Q shows higher activity and selectivity towards CO than Au38 T, and density functional theory (DFT) calculations reveal that the average formation energy of the key *COOH intermediate on the proposed active sites is significantly lower on Au38 Q than Au38 T. These results demonstrate how the structural isomerism can impact stabilization of reaction intermediates as well as the overall CO2 RR performance of identical size Au NCs. Overall, this work provides important structure-property relationships for tailoring the NCs for CO2 RR.
RESUMEN
Recent advances in the synthetic chemistry of atomically precise metal nanoclusters (NCs) have significantly broadened the accessible sizes and structures. Such particles are well defined and have intriguing properties, thus, they are attractive for catalysis. Especially, those NCs with identical size but different core (or surface) structure provide unique opportunities that allow the specific role of the core and the surface to be mapped out without complication by the size effect. Herein, we summarize recent work with isomeric Aun NCs protected by ligands and isostructural NCs but with different surface ligands. The highlighted work includes catalysis by spherical and rod-shaped Au25 (with different ligands), quasi-isomeric Au28 (SR)20 with different R groups, structural isomers of Au38 (SR)24 (with identical R) and Au38 S2 (SR)20 with body-centred cubic (bcc) structure, and isostructural [Au38 L20 (PPh3 )4 ]2+ (different L). These isomeric and/or isostructural NCs have provided valuable insights into the respective roles of the kernel, surface staples, and the type of ligands on catalysis. Future studies will lead to fundamental advances and development of tailor-made catalysts.
RESUMEN
To realize the molecular design of new functional silver(I) clusters, a new synthetic approach has been proposed, by which the weakly coordinating ligands NO3- in a Ag20 thiolate cluster precursor can be substituted by carboxylic ligands while keeping its inner core intact. By rational design, novel atom-precise carboxylic or amino acid protected 20-core Ag(I)-thiolate clusters have been demonstrated for the first time. The fluorescence and electrochemical activity of the postmodified Ag20 clusters can be modulated by alrestatin or ferrocenecarboxylic acid substitution. More strikingly, when chiral amino acids were used as postmodified ligands, CD-activity was observed for the Ag20 clusters, unveiling an efficient way to obtain atom-precise chiral silver(I) clusters.
RESUMEN
A polyoxometalate-templated silver(I) thiolate nanocluster has been synthesized by a one-pot reaction in high yield. This novel and stable nanocluster exhibits a core-shell structure with a Ag67S36 shell and two lacunary Keggin [PW9O34]9- cores, which is fully characterized by X-ray crystallography, X-ray photoelectron spectroscopy, UV-vis, powder X-ray diffraction, and cyclic voltammetry.
RESUMEN
Silver chalcogenolate cluster assembled materials (SCAMs) are a category of promising light-emitting materials the luminescence of which can be modulated by variation of their building blocks (cluster nodes and organic linkers). The transformation of a singly emissive [Ag12 (SBut )8 (CF3 COO)4 (bpy)4 ]n (Ag12 bpy, bpy=4,4'-bipyridine) into a dual-emissive [(Ag12 (SBut )6 (CF3 COO)6 (bpy)3 )]n (Ag12 bpy-2) via cluster-node isomerization, the critical importance of which was highlighted in dictating the photoluminescence properties of SCAMs. Moreover, the newly obtained Ag12 bpy-2 served to construct visual thermochromic Ag12 bpy-2/NH2 by a mixed-linker synthesis, together with dichromatic core-shell Ag12 bpy-2@Ag12 bpy-NH2 -2 via solvent-assisted linker exchange. This work provides insight into the significance of metal arrangement on physical properties of nanoclusters.
RESUMEN
The detailed characterization of AuAg alloy nanoclusters is essential to guide the discovery of species ideal for applications in various fields including catalysis and biomedicine. This work presents structural analysis of the Au104Ag40(PET)60 species through X-ray absorption spectroscopy (XAS). First, XAS fitting is utilized to model the distribution of Au and Ag atoms within the structure. Our proposed model assigns Ag atoms to the vertex sites of the second shell of the metal core, as well as the outermost staple sites. This distribution reveals Au104Ag40(PET)60 to be a Ag single-atom alloy. The proposed model shows outstanding agreement with the coordination number values derived from XAS. XAS near-edge analysis is employed to investigate the alloy bonding interactions between Au and Ag. Substantial d-electron transfer from Au to Ag is observed in this sample, beyond the magnitude of previously studied AuAg NCs. This work enhances the understanding of the structure-property relationship of AuAg alloy NCs, offering insights which can be applied to other large NCs and even NPs. These insights will in turn aid the discovery of new materials for use in various applications.
RESUMEN
Photoluminescence of ultrasmall, atomically precise gold nanoclusters constitutes an area of significant interest in recent years for both fundamental research and biological applications. However, the exploration of near-infrared photoluminescence of gold nanoclusters is still in its infancy due to the limitations of synthetic methods and characterization techniques. Herein, the photoluminescence properties of an Au38(PET)26 (PET = 2-phenylethanethiolate) nanocluster are investigated in detail. The Au38(PET)26 exhibits an emission peak at 865 nm, which is revealed to be a mix of fluorescence, thermally activated delayed fluorescence, and phosphorescence via the combined analyses of time-resolved and temperature-dependent photoluminescence measurements. The quantum yield of Au38(PET)26 is determined to be 1.8% at room temperature under ambient conditions, which increases to above 90% by suppressing the non-radiative relaxation pathway at a cryogenic temperature (80 K). Overall, the results of this work discover the coexistence of three radiative processes in thiolate-protected Au nanoclusters and will pave the way for understanding the intriguing photoluminescence properties of gold nanoclusters in future studies.
RESUMEN
The emergence of ligand-protected, atomically precise gold nanoclusters (NCs) in recent years has attracted broad interest in catalysis due to their well-defined atomic structures and intriguing properties. Especially, the precise formulas of NCs provide an opportunity to study the size effects at the atomic level without complications by the polydispersity in conventional nanoparticles that obscures the relationship between the size/structure and properties. Herein, we summarize the catalytic size effects of atomically precise, thioate-protected gold NCs in the range of tens to hundreds of metal atoms. The catalytic reactions include electrochemical catalysis, photocatalysis, and thermocatalysis. With the precise sizes and structures, the fundamentals underlying the size effects are analyzed, such as the surface area, electronic properties, and active sites. In the catalytic reactions, one or more factors may exert catalytic effects simultaneously, hence leading to different catalytic-activity trends with the size change of NCs. The summary of literature work disentangles the underlying fundamental mechanisms and provides insights into the size effects. Future studies will lead to further understanding of the size effects and shed light on the catalytic active sites and ultimately promote catalyst design at the atomic level.
RESUMEN
The metallic bond is arguably the most intriguing one among the three types of chemical bonds, and the resultant plasmon excitation (e.g. in gold nanoparticles) has garnered wide interest. Recent progress in nanochemistry has led to success in obtaining atomically precise nanoclusters (NCs) of hundreds of atoms per core. In this work, thiolate-protected Au279(SR)84 and Au333(SR)79 NCs, both in the nascent metallic state are investigated by cryogenic optical spectroscopy down to 2.5 K. At room temperature, both NCs exhibit distinct plasmon resonances, albeit the NCs possess a gap (estimated 0.02-0.03 eV, comparable to thermal energy). Interestingly, we observe no effect on plasmons with the transition from the metallic state at r.t. to the insulating state at cryogenic temperatures (down to 2.5 K), indicating a nonthermal origin for electron-gas formation. The electronic screening-induced birth of metallic state/bonding is discussed. The obtained insights offer deeper understanding of the nascent metallic state and covalent-to-metallic bonding evolution, as well as plasmon birth from concerted excitonic transitions.
RESUMEN
Understanding the electron-phonon interaction in Au nanoclusters (NCs) is essential for enhancing and tuning their photoluminescence (PL) properties. Among all the methods, ligand engineering is the most straightforward and facile one to design Au NCs with the desired PL properties. However, a systematic understanding of the ligand effects toward electron-phonon interactions in Au NCs is still missing. Herein, we synthesized four Au25(SR)18- NCs protected by different -SR ligands and carefully examined their temperature-dependent band-gap renormalization behavior. Data analysis by a Bose-Einstein two-oscillator model revealed a suppression of high-frequency optical phonons in aromatic-ligand-protected Au25 NCs. Meanwhile, a low-frequency breathing mode and a quadrupolar mode are attributed as the main contributors to the phonon-assisted nonradiative relaxation pathway in aromatic-ligand-protected Au25 NCs, which is in contrast with non-aromatic-ligand-protected Au25 NCs, in which tangential and radial modes play the key roles. The PL measurements of the four Au25 NCs showed that the suppression of optical phonons led to higher quantum yields in aromatic-ligand-protected Au25 NCs. Cryogenic PL measurements provide insights into the nonradiative energy relaxation, which should be further investigated for a full understanding of the PL mechanism in Au25 NCs.
RESUMEN
Probing the transition from a metallic state to a molecular state in gold nanoparticles is fundamentally important for understanding the origin of surface plasmon resonance and the nature of the metallic bond. Atomically precise gold nanoclusters are desired for probing such a transition based upon a series of precise sizes with X-ray structures. While the definition of the metallic state in nanoclusters is simple, that is, when the HOMO-LUMO gap (Eg) becomes negligibly small (Eg < kBT, where kB is the Boltzmann constant and T the temperature), the experimental determination of ultrasmall Eg (e.g., of kBT level) is difficult, and the thermal excitation of valence electrons apparently comes into play in ultrasmall Eg nanoclusters. Although a sharp transition from nonmetallic Au246(SR)80 to metallic Au279(SR)84 (SR: thiolate) has been observed, there is still uncertainty about the transition region. Here, we summarize several criteria on determining the metallic state versus the molecular (or nonmetallic) state in gold nanoclusters, including (1) Eg determined by optical and electrochemical methods, (2) steady-state absorption spectra, (3) cryogenic optical spectra, (4) transient absorption spectra, (5) excited-state lifetime and power dependence, and (6) coherent oscillations in ultrafast electron dynamics. We emphasize that multiple analyses should be performed and cross-checked in practice because no single criterion is definitive. We also review the photophysics of several gold nanoclusters with nascent surface plasmon resonance. These criteria are expected to deepen the understanding of the metallic to molecular state transition of gold and other metal nanoclusters and also promote the design of functional nanomaterials and their applications.
RESUMEN
Ultrasmall metal nanoparticles (below 2.2 nm core diameter) start to show discrete electronic energy levels due to strong quantum confinement effects and thus behave much like molecules. The size and structure dependent quantization induces a plethora of new phenomena, including multi-band optical absorption, enhanced luminescence, single-electron magnetism, and catalytic reactivity. The exploration of such new properties is largely built on the success in unveiling the crystallographic structures of atomically precise nanoclusters (typically protected by ligands, formulated as MnLmq, where M = metal, L = Ligand, and q = charge). Correlation between the atomic structures of nanoclusters and their properties has further enabled atomic-precision engineering toward materials design. In this frontier article, we illustrate several aspects of the precise engineering of gold nanoclusters, such as the single-atom size augmenting, single-atom dislodging and doping, precise surface modification, and single-electron control for magnetism. Such precise engineering involves the nanocluster's geometric structure, surface chemistry, and electronic properties, and future endeavors will lead to new materials design rules for structure-function correlations and largely boost the applications of metal nanoclusters in optics, catalysis, magnetism, and other fields. Following the illustrations of atomic-precision engineering, we have also put forth some perspectives. We hope this frontier article will stimulate research interest in atomic-level engineering of nanoclusters.
RESUMEN
Chirality is ubiquitous in nature and occurs at all length scales. The development of applications for chiral nanostructures is rising rapidly. With the recent achievements of atomically precise nanochemistry, total structures of ligand-protected Au and other metal nanoclusters (NCs) are successfully obtained, and the origins of chirality are discovered to be associated with different parts of the cluster, including the surface ligands (e.g., swirl patterns), the organic-inorganic interface (e.g., helical stripes), and the kernel. Herein, a unified picture of metal-ligand surface bonding-induced chirality for the nanoclusters is proposed. The different bonding modes of M-X (where M = metal and X = the binding atom of ligand) lead to different surface structures on nanoclusters, which in turn give rise to various characteristic features of chirality. A comparison of Au-thiolate NCs with Au-phosphine ones further reveals the important roles of surface bonding. Compared to the Au-thiolate NCs, the Ag/Cu/Cd-thiolate systems exhibit different coordination modes between the metal and the thiolate. Other than thiolate and phosphine ligands, alkynyls are also briefly discussed. Several methods of obtaining chiroptically active nanoclusters are introduced, such as enantioseparation by high-performance liquid chromatography and enantioselective synthesis. Future perspectives on chiral NCs are also proposed.
RESUMEN
We report the hydrothermally enhanced hydrolysis of polyacrylonitrile (PAN) in neutral water, which generates photoluminescent polymers with low unsaturation degrees. Despite the hydrophobic nature of PAN, the product can be dissolved in water at a high concentration (≥100 g/L). The product exhibits complete absence of alkenes or aromatic structures, and photoluminescence originates from newly formed N- and O-containing groups. The presence of both n to π* and π to π* transitions is confirmed by time-dependent density functional theory (TD-DFT) calculations. The efficient transformation of PAN benefits from the enhanced hydrolysis of nitrile groups. While similar reactions have been reported previously under alkaline environments, we demonstrate that efficient hydrolysis can also occur in neutral water under the hydrothermal condition. Two additional methods based on different mechanisms are discussed to demonstrate the simplicity and efficiency of the hydrothermal reaction.
RESUMEN
Recent efforts in nanoscience to control nanoparticles with atomic precision have met with success in solution-phase chemistry, opening new opportunities. The products, atomically precise nanoclusters (NCs), are not only compositionally well-defined but also structurally precise with unprecedented tailoring over the core and surface for specific functionalities. In this Perspective, we first highlight recent work in metal-hydride NCs for applications in catalytic hydrogenation and then reflect on the catalytic opportunities of atomically precise metal NCs. Metal NCs, as a new class of material, hold great promise for realizing the goals of understanding catalytic mechanisms at the atomic/molecular level (e.g., construction of active sites) and developing rules designing new catalysts with high activity and selectivity for important reactions. Tailoring NC catalysts at the atomic level will bring many exciting opportunities in future catalysis research.
RESUMEN
Atomically precise nanoclusters of coinage metals in the 1-3 nm size regime have been intensively pursued in recent years. Such nanoclusters are attractive as they fill the gap between small molecules (<1 nm) and regular nanoparticles (>3 nm). This intermediate identity endows nanoclusters with unique physicochemical properties and provides nanochemists opportunities to understand the fundamental science of nanomaterials. Metal nanoparticles are well known to exhibit plasmon resonances upon interaction with light; however, when the particle size is downscaled to the nanocluster regime, the plasmons fade out and step-like absorption spectra characteristic of cluster sizes are manifested due to strong quantum confinement effects. Recent research has revealed that nanoclusters are commonly composed of a distinctive kernel and a surface-protecting shell (or staple-like metal-ligand motifs). Understanding the kernel configuration and evolution is one of the central topics in nanoscience research. This Review summarizes the recent progress in identifying the growth patterns of atomically precise coinage nanoclusters. Several basic kernel units have been observed, such as the M4, M13 and M14 polyhedrons (where, M = metal atom). Among them, the tetrahedral M4 and icosahedral M13 units are the most common ones, which are adopted as building blocks to construct larger kernel structures via various fusion or aggregation modes, including the vertex- and face-sharing mode, the double-strand and alternate single-strand growth, and cyclic fusion of units, as well as the fcc-based cubic growth pattern. The identification of the kernel growth pathways has led to deeper understanding of the evolution of electronic structure and optic properties.
RESUMEN
A novel silver-chalcogenolate cluster-based framework Ag12TPPA·AA with long-lived afterglow was successfully synthesized. It transformed into more densely packed Ag12TPPA·AB and Ag12TPPA·ABC by layer sliding accompanied by macroscopic crystal contraction and changing luminescence.