Preparation and characterization of biomimetically and electrochemically deposited hydroxyapatite coatings on micro-arc oxidized Ti-13Nb-13Zr.

Surface properties and corrosion resistance analyses of Ti-13Nb-13Zr coated by an oxide film (obtained by micro-arc oxidation at 300 V) or an oxide/hydroxyapatite (HA) film are reported. HA films were biomimetically or electrochemically deposited on the alloy/oxide surface, and their properties compared. Both the biomimetic and the electrochemical method yielded rough and globular apatite surfaces (10-20 µm globules for the former and 1-2 µm for the latter). As inferred from XRD data, the electrochemical method yielded more biologic-like HA films, while the biomimetic method yielded films containing a mixture of calcium phosphate phases. Coated Ti-13Nb-13Zr samples were immersed in an aerated PBS solution and continuously analyzed during 49 days. Considering that, after immersion, the biomimetically deposited films presented smaller variations in thickness and morphology and higher electric resistance (determined by electrochemical impedance spectroscopy), they clearly provide significantly better protection to the Ti-13Nb-13Zr alloy when in PBS solution.

Influence of hydroxyapatite on the corrosion resistance of the Ti-13Nb-13Zr alloy.

Electrochemical analyses on the biocompatible alloy Ti-13Nb-13Zr wt% in an electrolyte simulating physiological medium (PBS solution) are reported. Hydroxyapatite (HA) films were obtained on the alloy by electrodeposition at constant cathodic current. Samples of the alloy covered with an anodic-oxide film or an anodic-oxide/HA film were analyzed by open circuit potential and electrochemical impedance spectroscopy measurements during 180 days in the PBS electrolyte. Analyses of the open-circuit potential (E (oc)) values indicated that the oxide/HA film presents better protection characteristics than the oxide only. This behavior was corroborated by the higher film resistances obtained from impedance data, indicating that, besides improving the alloy osteointegration, the hydroxyapatite film may also increase the corrosion protection of the biomaterial.

Growth of aluminum-free porous oxide layers on titanium and its alloys Ti-6Al-4V and Ti-6Al-7Nb by micro-arc oxidation.

The growth of oxides on the surfaces of pure Ti and two of its ternary alloys, Ti-6Al-4V and Ti-6Al-7Nb, by micro-arc oxidation (MAO) in a pH 5 phosphate buffer was investigated. The primary aim was to form thick, porous, and aluminum-free oxide layers, because these characteristics favor bonding between bone and metal when the latter is implanted in the human body. On Ti, Ti-6Al-4 V, and Ti-6Al-7Nb, the oxides exhibited breakdown potentials of about 200 V, 130 V, and 140 V, respectively, indicating that the oxide formed on the pure metal is the most stable. The use of the MAO procedure led to the formation of highly porous oxides, with a uniform distribution of pores; the pores varied in size, depending on the anodizing applied voltage and time. Irrespective of the material being anodized, Raman analyses allowed us to determine that the oxide films consisted mainly of the anatase phase of TiO2, and XPS results indicated that this oxide is free of Al and any other alloying element.