RESUMEN
The detection of pharmaceuticals has been a matter of concern among scientists and health researchers in the past few decades. However, it is still difficult to realize the sensitivity and selectivity detection of pharmaceuticals with similar structures. Herein, the pharmaceutical molecules of 2-mercaptobenzimidazole (MBI) and 2-mercaptobenzothiazole (MBT) with so similar structures can be selectively detected by surface-enhanced Raman spectroscopy (SERS) taking advantage of the fingerprint identification on Au/MIL-101(Cr), with sensitive detection limits of 0.5 ng·mL-1 for MBI and 1 ng·mL-1 for MBT. MBI is selectively enriched by Au/MIL-101(Cr) from the mixture solution and detected by SERS below 30 ng·mL-1. MBI can also be selectively detected in the serum samples with a detection limit of 10 ng·mL-1. Density functional theory calculations combined with the SERS experiments explained that the high sensitivity and selectivity are caused by the intrinsic differences in Raman intensity and different adsorption energies from the pharmaceutical molecules adsorbed on Au/MIL-101(Cr), respectively. This study provides an effective way to enrich and detect pharmaceutical molecules with similar structures.
Asunto(s)
Nanopartículas del Metal , Estructuras Metalorgánicas , Oro/química , Espectrometría Raman/métodos , Preparaciones Farmacéuticas , Nanopartículas del Metal/químicaRESUMEN
The ability of knowledge, attitude, and practice of intensive care unit (ICU) nurses to perform medical device-related pressure injuries (MDRPIs) can affect the incidence of MDRPI in ICU patients. Therefore, in order to improve ICU nurses' understanding and nursing ability of MDRPIs, we investigated the non-linear relationship (synergistic and superimposed relationships) between the factors influencing ICU nurses' ability of knowledge, attitude, and practice. A Clinical Nurses' Knowledge, Attitude, and Practice Questionnaire for the Prevention of MDRPI in Critically Ill Patients was administered to 322 ICU nurses from tertiary hospitals in China from January 1, 2022 to June 31, 2022. After the questionnaire was distributed, the data were collected and sorted out, and the corresponding statistical analysis and modelling software was used to analyse the data. IBM SPSS 25.0 software was used to conduct Single factor analysis and Logistic regression analysis on the data, so as to screen the statistically significant influencing factors. IBM SPSS Modeler18.0 software was used to construct a decision tree model of the factors influencing MDRPI knowledge, attitude, and practice of ICU nurses, and ROC curves were plotted to analyse the accuracy of the model. The results showed that the overall passing rate of ICU nurses' knowledge, attitude, and practice score was 72%. The statistically significant predictor variables ranked in importance were education background (0.35), training (0.31), years of working (0.24), and professional title (0.10). AUC = 0.718, model prediction performance is good. There is a synergistic and superimposed relationship between high education background, attended training, high years of working and high professional title. Nurses with the above factors have strong MDRPI knowledge, attitude, and practice ability. Therefore, nursing managers can develop a reasonable and effective scheduling system and MDRPI training program based on the study results. The ultimate goal is to improve the ability of ICU nurses to know and act on MDRPI and to reduce the incidence of MDRPI in ICU patients.
Asunto(s)
Enfermeras y Enfermeros , Úlcera por Presión , Humanos , Úlcera por Presión/etiología , Úlcera por Presión/prevención & control , Úlcera por Presión/epidemiología , Conocimientos, Actitudes y Práctica en Salud , Competencia Clínica , Estudios Transversales , Unidades de Cuidados Intensivos , Encuestas y CuestionariosRESUMEN
Surface-enhanced Raman spectroscopy (SERS) has been widely applied in many fields as a sensitive vibrational fingerprint technique. However, SERS faces challenges in quantitative analysis due to the heterogeneity of hot spots. An internal standard (IS) strategy has been employed for correcting the variation of hot spots. However, the method suffers from limitations due to the competitive adsorption between the IS and the target analyte. In this work, we combined the IS strategy with the 3D hybrid nanostructures to develop a bifunctional SERS substrate. The substrate had two functional units. The bottom self-assembly layer consisted of Au@IS@SiO2 nanoparticles, which provided a stable reference signal and functioned as the calibration unit. The top one consisted of appropriate-sized Au octahedrons for the detection of target analytes, which was the detection unit. Within the 3D hybrid nanostructure, the calibration unit improved the SERS performance of the detection unit, which was demonstrated by the 6-fold increase of SERS intensity when compared with the 2D substrate. Meanwhile, the reproducibility of the detection was greatly improved by correcting the hot spot changes through the calibration unit. Two biomedical molecules of cotinine and creatinine in ultrapure water and artificial urine, respectively, were sensitively determined by the 3D hybrid substrate. We expect that the developed bifunctional 3D substrate will open up new ways to advance the applications of SERS.
Asunto(s)
Oro , Nanopartículas del Metal , Calibración , Oro/química , Nanopartículas del Metal/química , Reproducibilidad de los Resultados , Dióxido de Silicio , Espectrometría Raman/métodosRESUMEN
Directly monitoring the oxygen reduction reaction (ORR) process in situ is very important to deeply understand the reaction mechanism and is a critical guideline for the design of high-efficiency catalysts, but there is still lack of definite in situ evidence to clarify the effect between adsorbed intermediates and the strain/electronic effect for enhanced ORR performance. Herein, in situ surface-enhanced Raman spectroscopy (SERS) was employed to detect the intermediates during the ORR process on the Au@Pd@Pt core/shell heterogeneous nanoparticles (NPs). Direct spectroscopic evidence of the *OOH intermediate was obtained, and an obvious red shift of the *OOH frequency was identified with the controllable shell thickness of Pd. Detailed experimental characterizations and density functional theory (DFT) calculations demonstrated that such improved ORR activity after inducing Pd into Au@Pt NPs can be attributed to the optimized adsorbate-substrate interaction due to the strain and electronic effect, leading to a higher Pt-O binding energy and a lower O-O binding energy, which was conducive to O-O dissociation and promoted the subsequent reaction. Notably, this work illustrates a relationship between the performance and strain/electronic effect via the intermediate detected by SERS and paves the way for the construction of ORR electrocatalysts with high performance.
RESUMEN
Precisely detecting the catalysts' hot spots temperature in situ instantly during photocatalysis is a great challenge but extremely important for chemical reactions. However, no efficient method has been developed to instantly detect the hot spots temperature in situ during photocatalysis. Herein, we designed a simple and convenient method to measure the instant hot spots temperature in situ on the nanostructure surface during photocatalysis by operando Raman spectroscopy using 4-methoxyphenyl isocyanide (MI) as the probe molecule. The νN≡C frequency of MI varied linearly with temperature, which is caused by the orientation change of the MI induced by temperature, leading to the change in the frequency of the νN≡C bond that directly interacts with the nanostructure surface. Using in situ surface-enhanced Raman spectroscopy (SERS), the surface temperature of the catalysts illuminating for each time can be measured instantly. Interestingly, the catalytic activity of the hydrogen evolution reaction (HER) for the Au-Ag/Ag2S heterojunction nanorods (HJNRs) are higher than that for the Ag-Au-Ag HJNRs, although they have a lower surface temperature during photocatalysis; therefore, hot carriers and electronic structure contributed more to the catalytic activity of the Au-Ag/Ag2S HJNRs than that of the Ag-Au-Ag HJNRs. Such an instant hot spots temperature detecting method of catalysts can greatly facilitate the analysis of the mechanism of catalytic processes.
Asunto(s)
Nanopartículas del Metal , Espectrometría Raman , Oro , Plata , TemperaturaRESUMEN
Brassinosteroids (BRs) regulate plant development and stress response. Although much has been learned about their roles in plant development, the mechanisms by which BRs regulate plant stress tolerance remain unclear. Chilling is a major stress that adversely affects plant growth. Here, we report that BR positively regulates chilling tolerance in tomato. BR partial deficiency aggravated chilling-induced oxidized protein accumulation, membrane lipid peroxidation, and decrease of maximum quantum efficiency of photosystem II (Fv/Fm). By contrast, overexpression of BR biosynthetic gene Dwarf or treatment with 24-epibrassinolide (EBR) attenuated chilling-induced oxidative damages and resulted in an increase of Fv/Fm. BR increased transcripts of RESPIRATORY BURST OXIDASE HOMOLOG1 (RBOH1) and GLUTAREDOXIN (GRX) genes, and BR-induced chilling tolerance was associated with an increase in the ratio of reduced/oxidized 2-cysteine peroxiredoxin (2-Cys Prx) and activation of antioxidant enzymes. However, RBOH1-RNAi plants failed to respond to EBR as regards to the induction of GRX genes, activation of antioxidant capacity, and attenuation of chilling-induced oxidative damages. Furthermore, silencing of GRXS12 and S14 compromised EBR-induced increases in the ratio of reduced/oxidized 2-Cys Prx and activities of antioxidant enzymes. Our study suggests that BR enhances chilling tolerance through a signalling cascade involving RBOH1, GRXs, and 2-Cys Prx in tomato.
Asunto(s)
Antioxidantes/metabolismo , Brasinoesteroides/metabolismo , Glutarredoxinas/metabolismo , Reguladores del Crecimiento de las Plantas/metabolismo , Transducción de Señal , Solanum lycopersicum/fisiología , Frío , Glutarredoxinas/genética , Peróxido de Hidrógeno/metabolismo , NADPH Oxidasas/genética , NADPH Oxidasas/metabolismo , Oxidación-Reducción , Peroxirredoxinas/genética , Peroxirredoxinas/metabolismo , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Estrés FisiológicoRESUMEN
Photocatalysis is a promising technology for renewable energy production. Many photocatalysis have realized the visible-light-driven catalytic activity. However, it is still difficult to achieve the enhanced photocatalytic activity with tunable wavelength. We have designed tunable wavelength enhanced photoelectrochemical cells by tuning the surface plasmon resonance (SPR) peaks, which can be controlled by the aspect ratios of the Au nanorods, for both the cathode with the hydrogen evolution reaction and the anode with the electrooxidation of methanol reaction. The optimal photocatalytic activity of the hydrogen evolution and electrooxidation of the methanol can be realized only when the illuminating wavelength matches with the SPR peaks, which is quite selective to the illuminating wavelength. The blue shift of the SPR peak increases the photoelectrocatalytic effect whereas the red shift enhances the photothermal effect. Such studies provide a useful way for improving the photocatalytic activity and the selectivity of the photocatalytic reactions by adjusting the illuminating wavelength.
RESUMEN
The surface plasmon resonance (SPR) induced photothermal and photoelectrocatalysis effects are crucial for catalytic reactions in many areas. However, it is still difficult to distinguish these two effects quantitatively. Here we used surface-enhanced Raman scattering (SERS) to detect the photothermal and photoelectrocatalytic effects induced by SPR from Au core Pt shell Nanoparticles (Au@Pt NPs), and calculated the quantitative contribution of the ratio of the photothermal and photoelectrocatalysis effects towards the catalytic activity. The photothermal effect on the nanoparticle surface after illumination is detected by SERS. The photoelectrocatalytic effect generated from SPR is proved by SERS with a probe molecule of p-aminothiophenol (PATP).
RESUMEN
Local structures and adsorption energies of a formic acid molecule and its decomposed intermediates (H, O, OH, CO, HCOO, and COOH) on highly electrocatalytically active mushroom-like Au-core@Pd-shell@Pt-cluster nanoparticles with two atomic layers of the Pd shell and stoichiometric Pt coverage of around half-monolayer (Au@2 ML Pd@0.5 ML Pt) have been investigated by first principles calculations. The adsorption sites at the center (far away from the Pt cluster) and the edge (close to the Pt cluster) are considered and compared. Significant repulsive interaction between the edge sites and CO is observed. The calculated potential energy surfaces demonstrate that, with respect to the center sites, the CO2 pathway is considerably promoted in the edge area. Our results reveal that the unique edge structure of the Pt cluster is responsible for the experimentally observed high electrocatalytic activity of the Au@Pd@Pt nanoparticles toward formic acid oxidation. Such microscopic understanding should be useful for the design of new electrochemical catalysts.
Asunto(s)
Formiatos/química , Oro/química , Nanopartículas del Metal/química , Paladio/química , Platino (Metal)/química , Teoría Cuántica , Adsorción , CatálisisRESUMEN
Recently, it was found that Pt clusters deposited on Pd shell over Au core nanoparticles (Au@Pd@Pt NPs) exhibit unusually high electrocatalytic activity for the electro-oxidation of formic acid (P. P. Fang, S. Duan, et al., Chem. Sci., 2011, 2, 531-539). In an attempt to offer an explanation, we used here carbon monoxide (CO) as probed molecules, and applied density functional theory (DFT) to simulate the surface Raman spectra of CO at this core-shell-cluster NPs with a two monolayer thickness of Pd shell and various Pt cluster coverage. Our DFT results show that the calculated Pt coverage dependent spectra fit the experimental ones well only if the Pt clusters adopt a mushroom-like structure, while currently the island-like structure is the widely accepted model, which follows the Volmer-Weber growth mode. This result infers that there should be a new growth mode, i.e., the mushroom growth mode as proposed in the present work, for Au@Pd@Pt NPs. We suggest that such a mushroom-like structure may offer novel active sites, which accounts for the observed high electrocatalytic activity of Au@Pd@Pt NPs.
Asunto(s)
Formiatos/química , Oro/química , Nanopartículas/química , Paladio/química , Platino (Metal)/química , Teoría Cuántica , Electroquímica , Modelos Moleculares , Oxidación-ReducciónRESUMEN
Plasmon-assisted chemical transformation holds great potential for solar energy conversion. However, simultaneous enhancement of reactivity and selectivity is still challenging and the mechanism remains mysterious. Herein, we elucidate the localized surface plasmon resonance (LSPR)-induced principles underlying the enhanced activity (â¼70%) and selectivity of photoelectrocatalytic redox of nitrobenzene (NB) on Au nanoparticles. Hot carriers selectively accelerate the conversion rate from NB to phenylhydroxylamine (PHA) by â¼14% but suppress the transformation rate from PHA to nitrosobenzene (NSB) by â¼13%. By adding an electron accepter, the as-observed suppression ratio is substantially enlarged up to 43%. Our experiments, supported by in situ surface-enhanced Raman spectroscopy and density functional theory simulations, reveal such particular hot-carrier-induced selectivity is conjointly contributed by the accelerated hot electron transfer and the corresponding residual hot holes. This work will help expand the applications of renewable sunlight in the directional production of value-added chemicals under mild conditions.
RESUMEN
By synthesizing Au nanoparticles with the controllable size from about 16 to 160 nm and measuring their SERS activity, the authors found that Au nanoparticles film with a size in the range of 120-135 nm showed the highest SERS activity with the 632.8 nm excitation, which is different from previous experimental results and theoretical predictions. The three dimensional finite difference time domain (3D-FDTD)method was employed to simulate the size dependent SERS activity. At the 632.8 nm excitation, the particles with a size of 110 nm shows the highest enhancement under coupling condition and presents an enhancement as high as 10(9) at the hot site. If the enhancement is averaged over the whole surface, the enhancement can still be as high as 10(7), in good agreement with our experimental data. For Au nanoparticles with a larger size such as 220 nm, the multipolar effect leads to the appearance of the second maximum enhancement with the increase in particles size. The averaged enhancement for the excitation line of 325 nm is only 10(2).
RESUMEN
Herein, Au core Pd shell Pt cluster nanorods (Au@Pd@Pt NRs) with enhanced catalytic activity were rationally designed for carbon dioxide (CO2) reduction. The surface composition and Pd-Pt ratios significantly influenced the catalytic activity, and the optimized structure had only a half-monolayer equivalent of Pt (θ Pt = 0.5) with 2 monolayers of Pd, which could enhance the catalytic activity for CO2 reduction by 6 fold as compared to the Pt surface at -1.5 V vs. SCE. A further increase in the loading of Pt actually reduced the catalytic activity; this inferred that a synergistic effect existed among the three different nanostructure components. Furthermore, these Au NRs could be employed to improve the photoelectrocatalytic activity by 30% at -1.5 V due to the surface plasmon resonance. An in situ SERS investigation inferred that the Au@Pd@Pt NRs (θ Pt = 0.5) were less likely to be poisoned by CO because of the Pd-Pt bimetal edge sites; due to this reason, the proposed structure exhibited highest catalytic activity. These results play an important role in the mechanistic studies of CO2 reduction and offer a new way to design new materials for the conversion of CO2 to liquid fuels.
RESUMEN
Mercury ion (Hg2+) is recognized as one of the most toxic metal ions for the environment and for human health. Techniques utilized in the detection of Hg2+ are an important factor. Herein, a simple thymine was successfully employed as the surface enhanced Raman spectroscopy sensor for Hg2+ ion detection. The limit of detection (LOD) of the developed sensor is better than 0.1 nM (0.02 ppb). This sensor can also selectively distinguish Hg2+ ions over 7 types of alkali, heavy metal and transition-metal ions. Moreover, the LOD of the sensor can even achieve 1 ppb in practical application in the nature system, which is half the maximum allowable level (10 nM, 2 ppb) stipulated in the US Environmental Protection Agency standard. Further investigation of the thymine-Hg2+-thymine coordination mechanism provides a possible means of detecting other metal ions by replacing the metal ion-specific ligands. This work paves the way for the detection of toxic metal ions and environmental problems.
RESUMEN
The fingerprints of 10 species including 27 accessions in genus Corchorus were investigated with the technique of RAPD. Twenty-five primers were screened from 119 random primers, and a total of 329 DNA fragments were amplified ranging from 0.3-3.0 kb, 253 (87.78%), which were polymorphic. The average number of DNA band produced by each primer was 13.16. UPGMA cluster analysis and Nei's similarity coefficients were carried out and a dendrogram was constructed using software Biol D++. The results showed as follows: (1) There were abundant genetic diversities among 15 wild species and 12 cultivated species in Corchorus with genetic similarity coefficients ranging from 0.49-0.98. (2) The accessions could be clustered into three groups at cultivated species, and their close wild species were obviously different from wild species genetically. (3) At the level of D = 0.850, 27 accessions of Jute could be classified into ten groups, including C. sestuans, C. tridens, C. fascicularis, C. psendo-olitorius, C. psendo-capsularis, C. tilacutaris, Tian Jute (untitled), C. capsularis, C. olitorius and C. uriticifolius. Among which C. capsularis presented closer relationship with C. olitorius and further relationship with C. uriticifolius. The results matched well with that of the morphologic classification. (4) According to the molecular cluster tree, C. uritifolius, Chinese Tina Jute (untitled) and C. aestuans were at the basic level, revealing that these three species could be the primary wild species of Jute. (5) The tree also showed that C. tilacularis 21C from Africa could be a ecological subspecies of C. tilacularis, whilst niannian cai, ma cai and zhu cai collected different ecological types of C. aestuans, C. capsularis from Hainan was a close wild species of round fruit Jute cultivated species, and three species of C. olitorius collected from zhangpu, Henan and Mali were close wild species of long fruit Jute cultivated species. (6) within two cultivated species, the genetic similarity coefficients in round fruit cultivated species was higher than that of in long fruit cultivated species.
Asunto(s)
Corchorus/genética , Técnica del ADN Polimorfo Amplificado Aleatorio/métodos , Corchorus/clasificación , ADN de Plantas/genética , ADN de Plantas/aislamiento & purificación , Variación Genética , Filogenia , Especificidad de la EspecieRESUMEN
Gold nanoparticle (Au NP) mirrors, which exhibit both high reflectance and electrical conductance, were self-assembled at a [heptane + 1,2-dichloroethane]/water liquid/liquid interface. The highest reflectance, as observed experimentally and confirmed by finite difference time domain calculations, occurred for Au NP films consisting of 60 nm diameter NPs and approximate monolayer surface coverage. Scanning electrochemical microscopy approach curves over the interfacial metallic NP films revealed a transition from an insulating to a conducting electrical material on reaching a surface coverage at least equivalent to the formation of a single monolayer. Reflectance and conductance transitions were interpreted as critical junctures corresponding to a surface coverage that exceeded the percolation threshold of the Au NP films at the [heptane + 1,2-dichloroethane]/water interface.
RESUMEN
We describe a method for investigating the reaction mechanism of fuel cell systems by designing a spectroelectrochemical cell with functions of temperature and flow control to mimic the reaction condition of fuel cell systems and utilizing Au core Pt shell (Au@Pt) nanoparticles to enhance the Raman signal of the surface species on the surface of electrocatalysts. The cell consists of three parts: a thin-layer spectroelectrochemical reaction chamber with an optical window for Raman measurement, the heating chamber right beneath the reaction chamber, and a long spiral flow channel to preheat the solution to the desired temperature and effectively exchange the solution. The temperature of the solution can be easily controlled from room temperature to 80 degrees C, and the flow rate can be as high as 945 microl s(-1). The temperature and flow control is demonstrated by monitoring the changes in the cyclic voltammograms and the Raman signals. By synthesizing Au@Pt nanoparticles and assembling them on a Pt substrate, we can significantly enhance the Raman signal of surface species on the Pt shell surface, which allows us to detect strong signal of CO as the dissociative product of formic acid as well as the intermediate species of the oxidation process. The further development and perspectives of using SERS to study the electrocatalytic systems are discussed.
Asunto(s)
Electroquímica/instrumentación , Electrodos , Análisis de Inyección de Flujo/instrumentación , Calefacción , Manejo de Especímenes/métodos , Análisis Espectral/métodos , Resonancia por Plasmón de Superficie/instrumentación , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
The aim of this work is to further improve the molecular generality and substrate generality of SERS (i.e., to fully optimize the SERS activity of transition-metal electrodes). We utilized a strategy of borrowing high SERS activity from the Au core based on Au-core Pt-shell (Au@Pt) nanoparticle film electrodes, which can be simply and routinely prepared. The shell thickness from about one to five monolayers of Pt atoms can be well controlled by adjusting the ratio of the number of Au seeds to Pt(IV) ions in the solution. The SERS experimental results of carbon monoxide adsorption indicate that the enhancement factor for the Au@Pt nanoparticle film electrodes is more than 2 orders of magnitude larger than that of electrochemically roughened Pt electrodes. The practical virtues of the present film electrodes for obtaining rich and high-quality vibrational information for diverse adsorbates on transition metals are pointed out and briefly illustrated with systems of CO, hydrogen, and benzene adsorbed on Pt. We believe that the electrochemical applications of SERS will be broadened with this strategy, in particular, for extracting detailed vibrational information for adsorbates at transition-metal electrode interfaces.