Enhanced cytotoxicity of gold porphyrin complexes after inclusion in cyclodextrin scaffolds adsorbed on polyethyleneimine-coated gold nanoparticles.

A new gold nanoparticle-based construct has been designed to hydrophobic drugs delivery into cancer cells. Cyclodextrin scaffolds adsorbed on polyethyleneimine-coated gold nanoparticles (AuNP@PEI@CD) have been used to encapsulate hydrophobic tetrapyrrolic compounds consisting of gold complexes of 5,10,15,20-tetraphenyl porphyrin (AuTPPCl) and 5-(4-acetoxyphenyl)-10,15,20-triphenyl porphyrin (AuTPPOAcCl). These two nanoparticles have been tested for their cytotoxic activities against the two colorectal cancer cell lines HT-29 and HCT-116 and have shown significant increases in toxicity when compared to the corresponding non-vectorized tetrapyrrolic macrocycles.

1,3,7-Trimethyl-2,4-dioxo-1,2,3,4-tetra-hydro-pteridine-6-carboxylic acid hemihydrate.

In the title compound, C(10)H(10)N(4)O(4)·0.5H(2)O, the two rings of the pteridine system are nearly coplanar [dihedral angle = 4.25 (9)°]. The atoms of the carboxyl group are also coplanar with the pteridine unit [r.m.s. deviation from the mean plane of the pteridine skeleton = 0.092 (2) Å]. In the crystal, the presence of the water molecule of crystallization (O atom site symmetry 2) leads to a hydrogen-bonding pattern different from the one shown by many carboxylic acid compounds (dimers formed through O-H⋯O hydrogen bonds between neighbouring carboxyl groups): in the present structure, the water mol-ecule, which lies on a binary axis, acts as a bridge between two mol-ecules, forming a hydrogen-bonded dimer. In addition to the hydrogen bonds, there are π-π ring stacking inter-actions involving the pyrimidine and pyrazine rings [centroid-centroid distance = 3.689 (1)Å], and two different pyrazine rings [centroid-centroid distance = 3.470 (1)Å]. Finally, there is a C-O⋯π contact involving a carboxyl-ate C-O and the pyrimidine ring with a short O⋯Cg distance of 2.738 (2) Å.

On-line solid-phase extraction with on-support derivatization for high-sensitivity liquid chromatography tandem mass spectrometry of estrogens in influent/effluent of wastewater treatment plants.

A solid-phase extraction coupled to liquid chromatography/tandem mass spectrometry for the determination of estrogens in sewage influent and effluent has been performed. The possibility of preparing estrogen derivatives directly on a solid-phase extraction bed in which the targeted analytes have been previously isolated and pre-concentrated was explored. This method uses an Oasis HLB column (2.1 mm x 20 mm i.d.) for on-line sample cleanup and derivatization support, and a Sunfire C(18) column (150 mm x 2.1 mm i.d.) with a mobile phase consisting of acetonitrile-water-formic acid for separation. After sample introduction, some matrix interferences are removed by washing up SPE column with methanol-water. Phenolic hydroxyl group of estrogens is subsequently derivatized with dansyl chloride. Reaction takes place in the on-line solid-phase extraction column. The excess of reagent and other matrix interferences are then removed by a second washing. Dansylated estrogens are further back eluted and analyzed with HPLC-MS-MS. The optimized on-line protocol is emphasized owing to a low limit of quantification (1 ng L(-1)) is achieved with only around 1 mL of sample and a low sensitive MS instrument. Developed strategy has been demonstrated to be an improvement over existing methods due to its greater sensitivity and the low volume of matrix used and the total analysis time (extraction, derivatization, analysis) is less than 17 min.

Photochemical degradation of imazamox in aqueous solution: influence of metal ions and anionic species on the ultraviolet photolysis.

Imazamox [5-methoxymethyl-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl) nicotinic acid] is one of the later pesticides of the imidazolinone family. The fate of imazamox has been studied upon UV irradiation. The degradation of a 10 mg L(-1) imazamox solution leads to pyridine derivatives, which remain in solution for 50-100 h. Most of the photoproducts occurring during the photodegradation have been characterized by means of liquid chromatography coupled with mass spectrometry. The degradation scheme is very similar to that observed for the analogous imazapyr pesticide [2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl) nicotinic acid]. Nevertheless, imazamox shows a greater stability than imazapyr. More, complexation interactions between imazamox and metal ions such as Cu2+ or Ca2+ increase the persistence of the pesticide.

Influence of metal salts on the photodegradation of imazapyr, an imidazolinone pesticide.

The behaviour of imazapyr (2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)nicotinic acid), a broad spectrum herbicide of the imidazolinone family, has been studied under UV radiation in the presence of metal salts. Complexation interactions between imazapyr and metal ions decreased imazapyr photolysis. A chemometric study compared the photodegradation of imazapyr in aqueous solutions in the presence of Na+, Ca2+ or Cu2+ and their concomitant anionic species (Cl-, NO3-) at various pesticide/metal ion molar ratios. The study showed the major role of metal ions in the degradation of imazapyr and its main photoproducts. The molecules were strongly stabilised on complexation with metal ions, leading to an increase in persistence of the pesticide.

Degradation pathway of dicyclanil in water in the presence of titanium dioxide. Comparison with photolysis.

The solar photolytic behavior of the pesticide 4,6-diamino-2-cyclopropyl-pyrimidine-5-carbonitrile, currently known as dicyclanil, has been mimicked in a photoreactor operating with an artificial light flux. The rate and pathway of degradation were performed. An additional study, using TiO(2) photocatalysis, has been achieved in order to determine the efficiency of photocatalysis to degrade the molecule. The catalyst was titania Degussa P-25. The aim of this article was the identification of the intermediate products formed during the irradiation, to establish the degradation pathway of dicyclanil. The kinetics of the reactions were followed by liquid chromatography with a diode array detector (LC-DAD). Most of the organic compounds occurring during the photodegradation have been identified by means of liquid chromatography and mass spectrometry coupled techniques (HPLC-MS). Additional analyses were carried out to evaluate the mineralization rates into nitrate and ammonium ions.

Polysaccharides as a marker for detection of corn sugar syrup addition in honey.

Honey is a natural product of high quality. However, because of its limited production and of its relatively high price, some beekeepers or unscrupulous traders do not hesitate to modify and falsify this natural product in order to try to increase its market value. Then, these involved falsification practices, for example intentional addition of cheap sugar syrup to honeys, are sometimes difficult to detect. An effective and simple analytical method is proposed in order to detect adulteration in honey by analysis of polysaccharide profiles. Samples were previously treated with reversed-phase solid phase extraction first to remove monosaccharides and small oligosaccharides and second to concentrate simultaneously traces of polysaccharides. A chromatographic separation using anion exchange stationary phase and pulse amperometric detection was further performed. Polysaccharide fingerprints (degree of polymerization from 11 to 17) were shown to be present in laboratory doped samples, and not detectable or present at very low concentrations in the authentic honey samples. Application to acacia, mountain polyfloral and polyfloral honeys enabled readily the detection of fraud resulting from deliberate addition of 1% of corn syrup.

Evidence of the substrate effect in hydrogen electroinsertion into palladium atomic layers by means of in situ surface X-ray diffraction.

In this work, we report an in situ surface X-ray diffraction study of the hydrogen electroinsertion in a two-monolayer equivalent palladium electrodeposit on Pt(111). The role of chloride in the deposition solution in favoring layer-by-layer film growth is evidenced. Three Pd layers are necessary to describe the deposit structure correctly, but the third-layer occupancy is quite low, equal to about 0.22. As a major result, resistance to hydriding of the two atomic Pd layers closest to the Pt interface is observed, which is linked to a strong effect of the Pt(111) substrate. As a consequence, we observe the lowering of the total hydride stoichiometry compared to bulk Pd. Our measurements also reveal good reversibility of the deposit structure, at least toward one hydrogen insertion-desorption cycle.

Development and optimisation of a single extraction procedure for the LC/MS/MS analysis of two pharmaceutical classes residues in sewage treatment plant.

A unique extraction procedure leading to the separation of 2 different pharmaceutical classes molecules has been developed and optimised by chemometric tools. From only one sampling, this analytical method allows the determination of 21 pharmaceuticals from corticosteroids and beta-blockers classes. Performing the SPE on Oasis MCX (mixed-mode cation exchange), the sequential elution of each pharmaceutical class is achievable, allowing a high purity level of extracts as well as high recovery rates. Performing a unique sample preparation results in an important save of time. The extracts were then analysed by LC/MS/MS, using a Hibar Purospher Star column for beta-blockers and an X-Bridge column for corticosteroids with formate buffer (pH 3.8)/AcN and water/AcN mobile phases, respectively. This work also includes a study of the chromatographic and mass spectrometric parameters in order to increase the analyte signal. The optimised SPE-LC/MS/MS method was then applied to environmental samples from sewage treatment plant (STP). beta-Blockers and corticosteroids were detected, respectively, in concentrations up to 318 ng L(-1) (sotalol) and 174 ng L(-1) (cortisone), in STP influents. Moreover, both pharmaceutical classes have also been detected in STP effluents. As far as we know, this is the first paper reporting the detection of corticosteroids in environmental waters. The developed analytical method can be used in further studies to investigate the environmental contamination by these drugs.

Photolysis of beta-blockers in environmental waters.

Many drugs such as beta-blockers have been shown to occur in aquatic environments. Even if adequate ecotoxicity data are not available, it is of primary importance to get informations about their fate in environmental waters, particularly about their photofate in sewage treatment plant effluents (STP). The main difficulties when studying pharmaceutical photochemical behaviour in environmental waters, are linked to the very low environmentally relevant concentrations (ng L(-1) to microg L(-1)) which can generate problems in terms of analytical sensitivity. Moreover, the complexity of environmental matrices can modify micropollutants degradation kinetics. The photodegradation of beta-blockers has been compared at two concentration levels (10 microg L(-1) and 10 mg L(-1)) and in two different matrices (pure water and STP effluent). It has been shown that the concentration does not influence beta-blockers degradation pathways, thus allowing the identification of degradation compounds using the 10 mg L(-1) solutions. Although environmental waters speed up the degradation process, the same photoproducts were appeared in both matrices. Using LC-MS/MS, hydroxyl radical additions have been identified as an important degradation pathway for especially pindolol, propranolol and timolol, leading to several positional isomers, corresponding to mono-, di- or tri-hydroxylations. Kinetics of appearance/disappearance of these photoproducts have been studied in STP effluents.

Electrochemical deposition of platinum nanoparticles on carbon: a study by standard and anomalous X-ray diffraction.

This paper is devoted to an alternative method to characterize platinum nanoparticles: X-ray powder diffraction with synchrotron radiation in classical and anomalous dispersion modes. We could straightforwardly determine the mean diameter and the surface concentration of carbon-supported platinum nanoparticles, even down to diameters of 2-3 nm and catalyst amounts of 0.03 mgcm(-2). We could study early stages of the formation of electrochemically prepared platinum nanoparticles from [PtCl4(2-) species preadsorbed on carbon inside a carbon-Nafion layer, to obtain a fuel-cell electrode. Our X-ray diffraction (XRD) results demonstrate that, provided the superficial concentration is not too high, new and smaller particles appear for each current pulse, since there is not any strong nucleation limitation for the high overvoltages obtained. Hydrogen evolution becomes the main electrochemical phenomenon on particles of sufficient size and it explains the noteworthy size limitation. Better yields of Pt metal are obtained for smaller current densities and longer times: the rate-determining step is then not electrochemical, but chemical or related to superficial diffusion.

Asymmetric intramolecular [2 + 2] photocycloadditions: alpha- and beta-hydroxy acids as chiral tether groups.

Chiral alpha- and beta-hydroxy acids such as (S)-lactic acid, (S)-phenyllactic acid, (S)-mandelic acid, or (3R)-3-hydroxybutyric acid have been used as tether groups for intramolecular and diastereoselective [2 + 2] photocycloaddition of 3-oxocyclohexene carboxylic acid derivatives. Total regiocontrol toward the straight adduct and high diastereoselectivities (up to 94%) were observed in the case of butenyl lactate 11. After separation of the two diastereoisomers, cleavage of the chiral tether under basic conditions afforded cyclobutane lactones in good yield and enantiomeric pure form. An X-ray structure has been recorded that confirmed the relative and absolute configuration of the three contiguous stereogenic centers assigned according to CD spectra.