A fluidized-bed-riser adsorption system for continuous bioproduct recovery from crude feedstock.

In this work, a novel technique for continuous purification of biologics from a crude feedstock is demonstrated with equipment referred to as Fluidized Bed Adsorption System (FBRAS). The development and validation of such unit operations were performed utilizing lysozyme as a model protein and Relisorb™ SP405/EB as a carrier. The performance of FBRAS to carry out combined clarification and purification was evaluated by capturing of antifungal peptides directly from the lysed broth. The novel technique reduced the number of process unit operations from six to three without having an impact on purity. Overall productivity increased by 250% in comparison to the existing downstream processing routine.

An engineered Staphylococcal Protein A based ligand: Production, characterization and potential application for the capture of Immunoglobulin and Fc-fusion proteins.

In antibody purification processes, affinity chromatography has been used with Staphylococcus aureus protein A (SpA) as the main ligand. In this work, we present a novel Staphylococcal Protein A (AviPure thereafter), a synthetic ligand analogue based on native SpA B domain, with a molecular weight of approximately 14 kDa. The binding affinity of mAbs to AviPure was evaluated using Surface Plasmon Resonance (SPR) and affinity chromatography methods. The equilibrium dissociation constant (KD) between the AviPure and mAbs was systematically measured using 1:1 (Langmuir) model and found to be 4.7 × 10-8 M, with constant of dissociation at kd ≤ 1.0 × 10-3 s-1 and ka being 3.1 × 104 M-1 s-1. When immobilized on Sepharose, the AviPure ligand density was 429 nmol/g moist weight resin and was able to effectively bind immunoglobulin and Fc fragment samples with higher affinity and the most effective flow rate when using ligand - Sepharose beads was at 75 cm/h giving the dynamic binding capacity of 53 mg/mL and 91% recovery of IgG. Suitable ligands used in affinity purification should have a KD ≤ 10-6 M and a dissociation rate (ka) averaging 10-3 M-1 s-1 with the kd ranging between 103 - 108 M-1. Therefore, the AviPure ligand can be used as an alternative to the standard protein A ligand in the purification of mAbs and Fc-fused proteins.

A megaporous material harbouring a peptide ligand for affinity IgG purification.

Common limitations of Protein A affinity chromatography include high adsorbent costs, ligand instability and possible ligand leakage. In this study, a short peptide with affinity for IgG was synthesized chemically and subsequently immobilized on a megaporous support. The support was prepared utilising the cryogel technique while the peptide-ligand was covalently immobilised via thiol-epoxy click chemistry. The cryogel support was chemically grafted to increase the number of reaction sites. This adsorbent was designated as "MP-Pep". Adsorption isotherms were employed to evaluate protein binding capacity. A maximum static binding capacity within the range of 30-60 mg/mL was observed for T hIgG. This parameter compares well with other commercial and non-commercial adsorbents, as reported in the literature. As a control material, a Protein A grafted megaporous cryogel was synthesized. Dynamic binding capacity values were obtained by breakthrough analysis. The peptide cryogel showed a dynamic capacity value 9.0 mg/mL in comparison to 9.7 mg/mL in the case of the Protein A based adsorbent. The ratio of dynamic binding capacity to static binding capacity was 20%, indicating suboptimal product capture. However, the advantage of MP-Pep lies in its cost-effective preparations while maintaining a reasonable binding capacity for the targeted product. The presence of cooperative effects during protein binding could also represent an advantage during the processing of a feedstock containing a product in high concentration.

A recombinant iron transport protein from Bordetella pertussis confers protection against Bordetella parapertussis.

Whooping cough, which is caused by Bordetella pertussis and B. parapertussis, is a reemerging disease. New protective antigens are needed to improve the efficacy of current vaccines against both species. Using proteomic tools, it was here found that B. parapertussis expresses a homolog of AfuA, a previously reported new vaccine candidate against B. pertussis. It was found that this homolog, named AfuABpp , is expressed during B. parapertussis infection, exposed on the surface of the bacteria and recognized by specific antibodies induced by the recombinant AfuA cloned from B. pertussis (rAfuA). Importantly, the presence of the O-antigen, a molecule that has been found to shield surface antigens on B. parapertussis, showed no influence on antibody recognition of AfuABpp on the bacterial surface. The present study further showed that antibodies induced by immunization with the recombinant protein were able to opsonize B. parapertussis and promote bacterial uptake by neutrophils. Finally, it was shown that this antigen confers protection against B. parapertussis infection in a mouse model. Altogether, these results indicate that AfuA is a good vaccine candidate for acellular vaccines protective against both causative agents of whooping cough.

A modular approach to multifunctional polypeptide/ceramic fluorapatite-based self-assembled system in affinity chromatography for the purification of human Immunoglobulin G.

The multifunctional bone sialoprotein/apatite (AP) self-assembled systems in the mineralized tissues show a pathway for the noncovalent immobilization of ligands on the AP chromatographic matrix. A model approach is presented here regarding the physical immobilization of ligands on the ceramic fluorapatite (CFT) matrix for the purification of human Immunoglobulin G (hIgG). The peptide pIC, HWRGWV-KPRSVSG, composed of a hIgG-specific peptide, HWRGWV (pLI), and a CFT-specific peptide, KPRSVSG (pTC), was synthesized and subjected to physicochemical characterization. A circular dichroism study showed that pIC possesses a flexible structural feature, which is significant in terms of its multifunctional activities. With the current approach, hIgG will be retained selectively by the self-assembled pIC/CFT column, while other biomolecules will pass through the column without being interacted. Therefore, the chromatographic conditions that are the key factors for the successful implementation of this technique were optimized as a function of the composition and pH of the mobile phase. Here, 115 mM sodium chloride (NaCl) in 20 mM sodium phosphate, pH 7.4, was used as the binding buffer, and the elution was performed with 225 mM NaCl in 20 mM sodium phosphate containing 0.3% w/v sodium acetate at pH 6. The binding capacity of the pIC/CFT column was 21.5 mg hIgG/ml matrix with a ligand density of 18.8 µmol/ml, and the binding capacity of the column increased with the increment of ligand density. Afterward, the applicability of a spacer arm between pLI and pTC was also verified. The hIgG-binding capacity of the column decreased with the increment in size of the spacer. In conclusion, the peptide-mediated self-assembled biomimetic system can be used as an alternative to the chemical immobilization of ligands in order to prevent unwanted consequences that result from some of the conventional ligand coupling chemistry.

Improved biomass and protein production in solid-state cultures of an Aspergillus sojae strain harboring the Vitreoscilla hemoglobin.

The biotechnological value of Aspergillus sojae ATCC 20235 (A. sojae) for production of pectinases in solid-state fermentation (SSF) has been demonstrated recently. However, a common drawback of fungal solid-state cultures is the poor diffusion of oxygen into the fungi that limits its growth and biological productivity. The bacterial Vitreoscilla hemoglobin (VHb) has favored the metabolism and productivities of various bacterial and yeast strains besides alleviating hypoxic conditions of its native host, but the use of VHb in filamentous fungi still remains poor explored. Based on the known effects of VHb, this study assessed its applicability to improve A. sojae performance in SSF. The VHb gene (vgb) under control of the constitutive Aspergillus nidulants gpdA promoter was introduced into the genome of A. sojae by Agrobacterium-mediated transformation. Successful fungal transformants were identified by fluorescence microscopy and polymerase chain reaction (PCR) analyses. In solid-state cultures, the content of protease, exo-polygalacturonase (exo-PG), and exo-polymethylgalacturonase (exo-PMG) of the transformed fungus (A. sojae vgb+) improved were 26, 60, and 44 % higher, respectively, in comparison to its parental strain (A. sojae wt). Similarly, biomass content was also 1.3 times higher in the transformant strain. No significant difference was observed in endo-polygalacturonase (endo-PG) content between both fungal strains, suggesting dissimilar effects of VHb towards different enzymatic productions. Overall, our results show that biomass, protease, and exo-pectinase content of A. sojae in SSF can be improved by transformation with VHb.

Characterization, optimization, and scale-up of cellulases production by trichoderma reesei cbs 836.91 in solid-state fermentation using agro-industrial products.

The application of cellulases in saccharification processes is restricted by its production cost. Consequently, new fungal strains able to elaborate higher cellulases titers and with special activity profiles are required to make the process economical. The aim of this investigation was to find a promising wild-type Trichoderma strain for cellulases production. The Trichoderma reesei strain 938 (CBS 836.91) was selected among twenty strains on the basis of cellulase-agar-plate screening. Evaluation of the selected strain on six solid substrates indicated the highest activities to be obtained from wheat bran. Statistical analyses of the experimental design indicated a significant effect of pH and moisture on the generation of endoglucanase (EGA) and filter-paper (FPA) activity. Furthermore, a central-composite design-based optimization revealed that pH values between 6.4 and 6.6 and moisture from 74 to 94% were optimal for cellulases production. Under these conditions, 8-10 IU gds(-1) of FPA and 15.6-17.8 IU gds(-1) of EGA were obtained. In addition, cultivation in a rotating-drum reactor under optimal conditions gave 8.2 IU gds(-1) FPA and 13.5 IU gds(-1) EGA. Biochemical characterization of T. reesei 938 cellulases indicated a substantially higher resistance to 4 mM Fe(+2) and a slightly greater tolerance to alkaline pH in comparison to Celluclast(®). These results suggest that T. reesei 938 could be a promising candidate for improved cellulases production through direct-evolution strategies.

A novel pectin-degrading enzyme complex from Aspergillus sojae ATCC 20235 mutants.

BACKGROUND: In the food industry, the use of pectinase preparations with high pectin esterase (PE) activity leads to the release of methanol, which is strictly regulated in food products. Herein, a pectin-degrading enzyme (PDE) complex exhibiting low PE activity of three Aspergillus sojae ATCC 20235 mutants (M3, DH56 and Guserbiot 2.230) was investigated. Production of exo-/endo-polygalacturonase (PG), exo-polymethylgalacturonase (PMG) and pectin lyase (PL) by mutant M3 and A. sojae using two different carbon sources was evaluated in solid-state fermentation. Finally, experimental preparations obtained from the mutants and commercial pectinases standardized to the same potency were screened for PDEs. RESULTS: Mutant M3 grown on sugar beet was found to be the best producer of exo-PG, endo-PG, exo-PMG and PL, with maximum yields of 1111, 449, 130 and 123 U g(-1), respectively. All experimental preparations exhibited low PE activity, at least 21.5 times less than commercial pectinases, and higher endo-PG (40 U mL(-1)). CONCLUSION: Mutant M3 was the best PDE producer using sugar beet. Mutant strains presented a PDE complex featuring high endo-PG and very low PE activities. This novel complex with low de-esterifying activity can be exploited in the food industry to degrade pectin without releasing methanol.

Immobilized palladium(II) ion affinity chromatography for recovery of recombinant proteins with peptide tags containing histidine and cysteine.

Fusion of peptide-based tags to recombinant proteins is currently one of the most used tools for protein production. Also, immobilized metal ion affinity chromatography (IMAC) has a huge application in protein purification, especially in research labs. The combination of expression systems of recombinant tagged proteins with this robust chromatographic system has become an efficient and rapid tool to produce milligram-range amounts of proteins. IMAC-Ni(II) columns have become the natural partners of 6xHis-tagged proteins. The Ni(II) ion is considered as the best compromise of selectivity and affinity for purification of a recombinant His-tagged protein. The palladium(II) ion is also able to bind to side chains of amino acids and form ternary complexes with iminodiacetic acid and free amino acids and other sulfur-containing molecules. In this work, we evaluated two different cysteine- and histidine-containing six amino acid tags linked to the N-terminal group of green fluorescent protein (GFP) and studied the adsorption and elution conditions using novel eluents. Both cysteine-containing tagged GFPs were able to bind to IMAC-Pd(II) matrices and eluted successfully using a low concentration of thiourea solution. The IMAC-Ni(II) system reaches less than 20% recovery of the cysteine-containing tagged GFP from a crude homogenate of recombinant Escherichia coli, meanwhile the IMAC-Pd(II) yields a recovery of 45% with a purification factor of 13.

Development of a transformation system for Aspergillus sojae based on the Agrobacterium tumefaciens-mediated approach.

BACKGROUND: Aspergillus sojae has been an important filamentous fungus in Biotechnology due to its use in diverse fermentative processes for the production of various food products. Furthermore, this fungus is a common expression system for the production of enzymes and other metabolites. The availability of molecular genetic tools to explore its biology is thus of big interest. In this study, an Agrobacterium tumefaciens-mediated transformation (ATMT) system for A. sojae was developed and its applicability evaluated. RESULTS: The donor plasmid named pRM-eGFP was constructed for ATMT of A. sojae. This plasmid contains the ble and egfp genes in its transfer DNA element (T-DNA) to confer phleomycin resistance and express the enhanced green fluorescent protein (EGFP) in A. sojae, respectively. Agrobacterium tumefaciens (LBA4404) harboring the donor plasmid and A. sojae (ATCC 20235) were co-cultured under diverse conditions to achieve ATMT. The maximum number of transformed fungi was obtained after three days of co-culturing at 28°C, and selection with 50 µg/ml phleomycin. Polymerase chain reaction (PCR), fluorescence microscopy and Western Blot analysis for EGFP expression confirmed successful genomic integration of the T-DNA element in A. sojae. The T-DNA was mitotically stable in approximately 40% of the fungal transformants after four generations of sub-culturing under phleomycin pressure. CONCLUSION: We successfully established a new ATMT protocol for A. sojae. This transformation system should enable further protein expression studies on this filamentous fungus.

Microbial strain improvement for enhanced polygalacturonase production by Aspergillus sojae.

Strain improvement is a powerful tool in commercial development of microbial fermentation processes. Strains of Aspergillus sojae which were previously identified as polygalacturonase producers were subjected to the cost-effective mutagenesis and selection method, the so-called random screening. Physical (ultraviolet irradiation at 254 nm) and chemical mutagens (N-methyl-N'-nitro-N-nitrosoguanidine) were used in the development and implementation of a classical mutation and selection strategy for the improved production of pectic acid-degrading enzymes. Three mutation cycles of both mutagenic treatments and also the combination of them were performed to generate mutants descending from A. sojae ATCC 20235 and mutants of A. sojae CBS 100928. Pectinolytic enzyme production of the mutants was compared to their wild types in submerged and solid-state fermentation. Comparing both strains, higher pectinase activity was obtained by A. sojae ATCC 20235 and mutants thereof. The highest polygalacturonase activity (1,087.2 ± 151.9 U/g) in solid-state culture was obtained by mutant M3, which was 1.7 times increased in comparison to the wild strain, A. sojae ATCC 20235. Additional, further mutation of mutant M3 for two more cycles of treatment by UV irradiation generated mutant DH56 with the highest polygalacturonase activity (98.8 ± 8.7 U/mL) in submerged culture. This corresponded to 2.4-fold enhanced polygalacturonase production in comparison to the wild strain. The results of this study indicated the development of a classical mutation and selection strategy as a promising tool to improve pectinolytic enzyme production by both fungal strains.

The role of ligands on protein retention in adsorption chromatography: a surface energetics approach.

Protein adsorption onto hydrophobic chromatographic supports has been investigated using a colloid theory surface energetics approach. The surface properties of commercially available chromatographic beads, Toyopearl Phenyl 650-C, and Toyopearl Butyl 650-C, have been experimentally determined by contact angle and zeta potential measurements. The adsorption characteristics of these beads, which bear the same backbone matrix but harbor different ligands, have been studied toward selected model proteins, in the hydrated as well as dehydrated state. There were two prominent groups of proteins observed with respect to the chromatographic supports presented in this work: loosely retained proteins, which were expected to have lower average interaction energies, and the strongly retained proteins, which were expected to have higher average interaction energies. Results were also compared and contrasted with calculations derived from adsorbent surface energies determined by inverse liquid chromatography. These results showed a good qualitative agreement, and the interaction energy minima obtained from these extended Derjaguin, Landau, Verwey and Overbeek calculations were shown to correlate well with the experimentally determined adsorption behavior of each protein.

Selection of ceramic fluorapatite-binding peptides from a phage display combinatorial peptide library: optimum affinity tags for fluorapatite chromatography.

Peptide affinity tags have become efficient tools for the purification of recombinant proteins from biological mixtures. The most commonly used ligands in this type of affinity chromatography are immobilized metal ions, proteins, antibodies, and complementary peptides. However, the major bottlenecks of this technique are still related to the ligands, including their low stability, difficulties in immobilization, and leakage into the final products. A model approach is presented here to overcome these bottlenecks by utilizing macroporous ceramic fluorapatite (CFA) as the stationary phase in chromatography and the CFA-specific short peptides as tags. The CFA chromatographic materials act as both the support matrix and the ligand. Peptides that bind with affinity to CFA were identified from a randomized phage display heptapeptide library. A total of five rounds of phage selection were performed. A common N-terminal sequence was found in two selected peptides: F4-2 (KPRSMLH) and F5-4 (KPRSVSG). The peptide F5-4, displayed by more than 40% of the phages analyzed in the fifth round of selection, was subjected to further studies. Selectivity of the peptide for the chemical composition and morphology of CFA was assured by the adsorption studies. The dissociation constant, obtained from the F5-4/CFA adsorption isotherm, was in the micromolar range, and the maximum capacity was 39.4 nmol/mg. The chromatographic behavior of the peptides was characterized on a CFA stationary phase with different buffers. Preferential affinity and specific retention properties suggest the possible application of the phage-derived peptides as a tag in CFA affinity chromatography for enhancing the selective recovery of proteins.

Proteome wide evaluation of the separation ability of hydrophobic interaction chromatography by fluorescent dye binding analysis.

Hydrophobic interaction chromatography (HIC) is an important tool in the industrial purification of proteins from various sources. The HIC separation behavior of individual (or model) proteins has been widely researched by others. On the contrary, this study focused on the fractionation ability of HIC when it is challenged with whole proteomes. The impact of the nature of three different proteomes, that is, yeast, soybean, and Chinese hamster ovary cells, on HIC separation was investigated. In doing so, chromatography fractions obtained under standardized conditions were evaluated in terms of their overall hydrophobicity--as measured by fluorescence dye binding. This technique allowed for the calculation of an average protein surface hydrophobicity (S(0)) for each fraction; a unique correlation between S(0) and the observed chromatographic behavior was established in each case. Following a similar strategy, the effect of three different ligands (polypropylene glycol, phenyl, and butyl) and two adsorbent particle sizes (65 and 100 µm) on the chromatographic behavior of the yeast proteome was evaluated. As expected, the superficial hydrophobicity of the proteins eluted is correlated with the salt concentration of its corresponding elution step. The findings reveled how--and in which extent--the type of ligand and the size of the beads actually influenced the fractionation of the complex biological mixture. Summarizing, the approach presented here can be instrumental to the study of the performance of chromatography adsorbents under conditions close to industrial practice and to the development of downstream processing strategies.

Cloning and expression of an active aspartic proteinase from Mucor circinelloides in Pichia pastoris.

BACKGROUND: Extracellular aspartic proteinase (MCAP) produced by Mucor circinelloides in solid state fermentations has been shown to possess milk clotting activity and represents a potential replacement for bovine chymosin in cheese manufacturing. Despite its prospects in the dairy industry, the molecular characteristics of this enzyme remain unknown. This work focuses on MCAP cloning and optimization of heterologous expression in Pichia pastoris, and characterization of the enzyme. RESULTS: The cloning of cDNA sequence encoding MCAP from M. circinelloides was performed using a fragment of approximately 1 kbp as a probe. The fragment was amplified using non-specific primers designed from the NDIEYYG and KNNYVVFN consensus motifs from aspartic proteinases of different fungi. Gene specific primers were designed to amplify a full-length cDNA using SMART™ RACE PCR. MCAP was expressed in P. pastoris under the control of the constitutive GAP promoter. It was shown that P. pastoris secreted non-glycosylated and glycosylated MCAPs with molecular weights of 33 and 37 kDa, respectively. CONCLUSION: A novel MCAP was expressed in P. pastoris and efficiently secreted into the culture medium. The expression of the heterologous proteins was significantly increased due to advantages in codon usage as compared to other expression systems. The results suggest that P. pastoris could be exploited as a safe production platform for the milk clotting enzyme.

Probing the dynamic reversibility and generation of dynamic combinatorial libraries in the presence of bacterial model oligopeptides as templating guests of tetra-carbohydrazide macrocycles using electrospray mass spectrometry.

RATIONALE: Over the past few decades, bacterial resistance to antibiotics has emerged as a real threat to human health. Accordingly, there is an urgent demand for the development of innovative strategies for discovering new antibiotics. We present the first use of tetra-carbohydrazide cyclophane macrocycles in dynamic combinatorial chemistry (DCC) and molecular recognition as chiral hosts binding oligopeptides, which mimic bacterial cell wall. This study introduces an innovative application of electrospray ionisation time-of-flight mass spectrometry (ESI-TOF MS) to oligopeptides recognition using DCC. METHODS: A small dynamic library composed of eight functionalised macrocycles has been generated in solution and all members were characterised by ESI-TOF MS. We also probed the dynamic reversibility and mechanism of formation of tetra-carbohydrazide cyclophanes in real-time using ESI-TOF MS. RESULTS: Dynamic reversibility of tetra-carbohydrazide cyclophanes is favored under thermodynamic control. The mechanism of formation of tetra-carbohydrazide cyclophanes involves key dialdehyde intermediates, which have been detected and assigned according to their high-resolution m/z values. Three members of the dynamic library bind efficiently in the gas phase to a selection of oligopeptides, unique to bacteria, allowing observation of host/guest complex ions in the gas phase. CONCLUSIONS: We probed the mechanism of the [2+2]-cyclocondensation reaction forming library members, proved dynamic reversibility of tetra-carbohydrazide cyclophanes and showed that complex ions formed between library members and hosts can be observed in the gas phase, allowing the solution of an important problem of biological interest.

Extended DLVO calculations expose the role of the structural nature of the adsorbent beads during chromatography.

Protein adsorption onto hydrophobic interaction chromatography supports was studied by a surface-thermodynamics approach. To gather relevant experimental information, contact angle measurements and zeta potential determinations were performed on three different commercial adsorbent beads, Phenyl Sepharose 6 Fast Flow, Toyopearl Phenyl 650-C and Source 15 Phenyl, having soft to rigid backbone structure. Similar information was obtained for a collection of model proteins, lysozyme, bovine serum albumin (BSA), polygalacturonase, aminopeptidase, chymosin, aspartic protease, beta-galactosidase, human immunoglobulin G, and lactoferrin, were evaluated in the hydrated and in the dehydrated state. Based on the mentioned experimental data, calculations were performed to obtain the (interfacial) energy versus distance profiles of nine individual (model) proteins on (commercial) beads of three different types. All of these beads harbored the phenyl-ligand onto a matrix of differentiated chemical nature. Extended Derjaguin, Landau, Verwey, and Overbeek (DLVO) calculations were correlated with actual chromatographic behavior. Typical chromatography conditions were employed. The population of model proteins utilized in this study could be segregated into two groups, according to the minimum values observed for the resulting interaction energy pockets and the corresponding retention volumes (or times) during chromatography. Moreover, trends were also identified as a function of the type of adsorbent bead under consideration. This has revealed the influence of the physicochemical nature of the bead structure on the adsorption process and consequently, on the expected separation behavior.

Understanding the interaction of proteins to ion exchange chromatographic supports: A surface energetics approach.

Ion exchange chromatography is one of the most widely used chromatographic technique for the separation and purification of important biological molecules. Due to its wide applicability in separation processes, a targeted approach is required to suggest the effective binding conditions during ion exchange chromatography. A surface energetics approach was used to study the interaction of proteins to different types of ion exchange chromatographic beads. The basic parameters used in this approach are derived from the contact angle, streaming potential, and zeta potential values. The interaction of few model proteins to different anionic and cationic exchanger, with different backbone chemistry, that is, agarose and methacrylate, was performed. Generally, under binding conditions, it was observed that proteins having negative surface charges showed strong to lose interaction (20 kT for Hannilase to 0.5 kT for IgG) with different anionic exchangers (having different positive surface charges). On the contrary, anionic exchangers showed almost no interaction (0-0.1 kT) with the positively charged proteins. An inverse behavior was observed for the interaction of proteins to cationic exchangers. The outcome from these theoretical calculations can predict the binding behavior of different proteins under real ion exchange chromatographic conditions. This will ultimately propose a better bioprocess design for protein separation.

Human macrophage polarization shapes B. pertussis intracellular persistence.

We previously demonstrated that Bordetella pertussis, the etiologic agent of whooping cough, is able to survive inside human macrophages. The aim of this study was to examine the influence of macrophage polarization in the development of B. pertussis intracellular infections. To this end, primary human monocytes were differentiated into M1, M2a, or M2c macrophages and further infected with B. pertussis. Infected M1 macrophages showed a proinflammatory response evidenced by the production of TNF-α, IL-12p70, and IL-6. Conversely, infection of M2a and M2c macrophages did not induce TNF-α, IL-12p70, nor IL-6 at any time postinfection but showed a significant increase of M2 markers, such as CD206, CD163, and CD209. Interestingly, anti-inflammatory cytokines, like IL-10 and TGF-ß, were induced after infection in the 3 macrophage phenotypes. B. pertussis phagocytosis by M1 macrophages was lower than by M2 phenotypes, which may be ascribed to differences in the expression level of B. pertussis docking molecules on the surface of the different phenotypes. Intracellular bactericidal activity was found to be significantly higher in M1 than in M2a or M2c cells, but live bacteria were still detected within the 3 phenotypes at the late time points after infection. In summary, this study shows that intracellular B. pertussis is able to survive regardless of the macrophage activation program, but its intracellular survival proved higher in M2 compared with the M1 macrophages, being M2c the best candidate to develop into a niche of persistence for B. pertussis.

Aspartic proteinases from Mucor spp. in cheese manufacturing.

Filamentous fungi belonging to the order of Mucorales are well known as producers of aspartic proteinases depicting milk-clotting activity. The biosynthesis level, the biochemical characteristics, and the technological properties of the resulting proteinases are affected by the producer strain and the mode of cultivation. While the milk-clotting enzymes produced by the Rhizomucor spp. have been extensively studied in the past, much less is known on the properties and potential applications of the aspartic proteinases obtained for Mucor spp. Indeed, several Mucor spp. strains have been reported as a potential source of milk-clotting enzymes having unique technological properties. Both submerged fermentation and solid substrate cultivation are proven alternatives for the production of Mucor spp. aspartic proteinases. This review provides an overview on the bioprocessing routes to obtain large amounts of these enzymes, on their structural characteristics as related to their functional properties, and on their industrial applications with focus on cheese manufacturing.