Deubiquitinase-targeting chimeras for targeted protein stabilization.

Many diseases are driven by proteins that are aberrantly ubiquitinated and degraded. These diseases would be therapeutically benefited by targeted protein stabilization (TPS). Here we present deubiquitinase-targeting chimeras (DUBTACs), heterobifunctional small molecules consisting of a deubiquitinase recruiter linked to a protein-targeting ligand, to stabilize the levels of specific proteins degraded in a ubiquitin-dependent manner. Using chemoproteomic approaches, we discovered the covalent ligand EN523 that targets a non-catalytic allosteric cysteine C23 in the K48-ubiquitin-specific deubiquitinase OTUB1. We showed that a DUBTAC consisting of our EN523 OTUB1 recruiter linked to lumacaftor, a drug used to treat cystic fibrosis that binds ΔF508-cystic fibrosis transmembrane conductance regulator (CFTR), robustly stabilized ΔF508-CFTR protein levels, leading to improved chloride channel conductance in human cystic fibrosis bronchial epithelial cells. We also demonstrated stabilization of the tumor suppressor kinase WEE1 in hepatoma cells. Our study showcases covalent chemoproteomic approaches to develop new induced proximity-based therapeutic modalities and introduces the DUBTAC platform for TPS.

Author Correction: Structural basis of indisulam-mediated RBM39 recruitment to DCAF15 E3 ligase complex.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Structural basis of indisulam-mediated RBM39 recruitment to DCAF15 E3 ligase complex.

The anticancer agent indisulam inhibits cell proliferation by causing degradation of RBM39, an essential mRNA splicing factor. Indisulam promotes an interaction between RBM39 and the DCAF15 E3 ligase substrate receptor, leading to RBM39 ubiquitination and proteasome-mediated degradation. To delineate the precise mechanism by which indisulam mediates the DCAF15-RBM39 interaction, we solved the DCAF15-DDB1-DDA1-indisulam-RBM39(RRM2) complex structure to a resolution of 2.3 Å. DCAF15 has a distinct topology that embraces the RBM39(RRM2) domain largely via non-polar interactions, and indisulam binds between DCAF15 and RBM39(RRM2), coordinating additional interactions between the two proteins. Studies with RBM39 point mutants and indisulam analogs validated the structural model and defined the RBM39 α-helical degron motif. The degron is found only in RBM23 and RBM39, and only these proteins were detectably downregulated in indisulam-treated HCT116 cells. This work further explains how indisulam induces RBM39 degradation and defines the challenge of harnessing DCAF15 to degrade additional targets.

Two Distinct Mechanisms of Inhibition of LpxA Acyltransferase Essential for Lipopolysaccharide Biosynthesis.

The lipopolysaccharide biosynthesis pathway is considered an attractive drug target against the rising threat of multi-drug-resistant Gram-negative bacteria. Here, we report two novel small-molecule inhibitors (compounds 1 and 2) of the acyltransferase LpxA, the first enzyme in the lipopolysaccharide biosynthesis pathway. We show genetically that the antibacterial activities of the compounds against efflux-deficient Escherichia coli are mediated by LpxA inhibition. Consistently, the compounds inhibited the LpxA enzymatic reaction in vitro. Intriguingly, using biochemical, biophysical, and structural characterization, we reveal two distinct mechanisms of LpxA inhibition; compound 1 is a substrate-competitive inhibitor targeting apo LpxA, and compound 2 is an uncompetitive inhibitor targeting the LpxA/product complex. Compound 2 exhibited more favorable biological and physicochemical properties than compound 1 and was optimized using structural information to achieve improved antibacterial activity against wild-type E. coli. These results show that LpxA is a promising antibacterial target and imply the advantages of targeting enzyme/product complexes in drug discovery.

First Crystal Structure of a Nonstructural Hepatitis E Viral Protein Identifies a Putative Novel Zinc-Binding Protein.

Hepatitis E virus (HEV) is a 7.2-kb positive-sense, single-stranded RNA virus containing three partially overlapping reading frames, ORF1 to ORF3. All nonstructural proteins required for viral replication are encoded by ORF1 and are transcribed as a single transcript. Computational analysis of the complete ORF1 polyprotein identified a previously uncharacterized region of predicted secondary structure bordered by two disordered regions coinciding partially with a region predicted as a putative cysteine protease. Following successful cloning, expression, and purification of this region, the crystal structure of the identified protein was determined and identified to have considerable structural homology to a fatty acid binding domain. Further analysis of the structure revealed a metal binding site, shown unambiguously to specifically bind zinc via a nonclassical, potentially catalytic zinc-binding motif. Based on the structural homology of the HEV protein with known structures, along with the presence of a catalytic zinc-binding motif, it is possible that the identified protein corresponds to the HEV protease, which could require activation or repression through the binding of a fatty acid. This represents a significant step forward in the characterization and the understanding of the molecular mechanisms of the HEV genome. We present analysis for the first time of this identified nonstructural protein, expanding the knowledge and understanding of the complex mechanisms of HEV biology.IMPORTANCE Hepatitis E virus (HEV) is an emerging virus found predominately in developing countries; it causes an estimated 20 million infections, which result in approximately 57,000 deaths a year. Although it is known that the nonstructural proteins of HEV ORF1 are expressed as a single transcript, there is debate as to whether ORF1 functions as a single polyprotein or if it is processed into separate domains via a viral or endogenous cellular protease. Here we present the first structural and biophysical characterization of an HEV nonstructural protein using a construct that has partially overlapping boundaries with the predicted putative cysteine protease.

Comprehensive and High-Throughput Exploration of Chemical Space Using Broadband 19 F†NMR-Based Screening.

Fragment-based lead discovery has become a fundamental approach to identify ligands that efficiently interact with disease-relevant targets. Among the numerous screening techniques, fluorine-detected NMR has gained popularity owing to its high sensitivity, robustness, and ease of use. To effectively explore chemical space, a universal NMR experiment, a rationally designed fragment library, and a sample composition optimized for a maximal number of compounds and minimal measurement time are required. Here, we introduce a comprehensive method that enabled the efficient assembly of a high-quality and diverse library containing nearly 4000 fragments and screening for target-specific binders within days. At the core of the approach is a novel broadband relaxation-edited NMR experiment that covers the entire chemical shift range of drug-like 19 F motifs in a single measurement. Our approach facilitates the identification of diverse binders and the fast ligandability assessment of new targets.

Facilitating unambiguous NMR assignments and enabling higher probe density through selective labeling of all methyl containing amino acids.

The deuteration of proteins and selective labeling of side chain methyl groups has greatly enhanced the molecular weight range of proteins and protein complexes which can be studied using solution NMR spectroscopy. Protocols for the selective labeling of all six methyl group containing amino acids individually are available, however to date, only a maximum of five amino acids have been labeled simultaneously. Here, we describe a new methodology for the simultaneous, selective labeling of all six methyl containing amino acids using the 115 kDa homohexameric enzyme CoaD from E. coli as a model system. The utility of the labeling protocol is demonstrated by efficiently and unambiguously assigning all methyl groups in the enzymatic active site using a single 4D (13)C-resolved HMQC-NOESY-HMQC experiment, in conjunction with a crystal structure. Furthermore, the six fold labeled protein was employed to characterize the interaction between the substrate analogue (R)-pantetheine and CoaD by chemical shift perturbations, demonstrating the benefit of the increased probe density.

Direct prediction of residual dipolar couplings of small molecules in a stretched gel by stochastic molecular dynamics simulations.

Residual dipolar couplings are highly useful NMR parameters for calculating and refining molecular structures, dynamics, and interactions. For some applications, however, it is inevitable that the preferred orientation of a molecule in an alignment medium is calculated a priori. Several methods have been developed to predict molecular orientations and residual dipolar couplings. Being beneficial for macromolecules and selected small-molecule applications, such approaches lack sufficient accuracy for a large number of organic compounds for which the fine structure and eventually the flexibility of all involved molecules have to be considered or are limited to specific, well-studied liquid crystals. We introduce a simplified model for detailed all-atom molecular dynamics calculations with a polymer strand lined up along the principal axis as a new approach to simulate the preferred orientation of small to medium-sized solutes in polymer-based, gel-type alignment media. As is shown by a first example of strychnine in a polystyrene/CDCl3 gel, the simulations potentially enable the accurate prediction of residual dipolar couplings taking into account structural details and dynamic averaging effects of both the polymer and the solute.

Receptor-bound conformation of cilengitide better represented by its solution-state structure than the solid-state structure.

The X-ray crystal and NMR spectroscopic structures of the peptide drug candidate Cilengitide (cyclo(RGDf(NMe)Val)) in various solvents are obtained and compared in addition to the integrin receptor bound conformation. The NMR-based solution structures exhibit conformations closely resembling the X-ray structure of Cilengitide bound to the head group of integrin αvß3. In contrast, the structure of pure Cilengitide recrystallized from methanol reveals a different conformation controlled by the lattice forces of the crystal packing. Molecular modeling studies of the various ligand structures docked to the αvß3 integrin revealed that utilization of the solid-state conformation of Cilengitide leads-unlike the solution-based structures-to a mismatch of the ligand-receptor interactions compared with the experimentally determined structure of the protein-ligand complex. Such discrepancies between solution and crystal conformations of ligands can be misleading during the structure-based lead optimization process and should thus be taken carefully into account in ligand orientated drug design.

Surface reengineering of RPA70N enables cocrystallization with an inhibitor of the replication protein A interaction motif of ATR interacting protein.

Replication protein A (RPA) is the primary single-stranded DNA (ssDNA) binding protein in eukaryotes. The N-terminal domain of the RPA70 subunit (RPA70N) interacts via a basic cleft with a wide range of DNA processing proteins, including several that regulate DNA damage response and repair. Small molecule inhibitors that disrupt these protein-protein interactions are therefore of interest as chemical probes of these critical DNA processing pathways and as inhibitors to counter the upregulation of DNA damage response and repair associated with treatment of cancer patients with radiation or DNA-damaging agents. Determination of three-dimensional structures of protein-ligand complexes is an important step for elaboration of small molecule inhibitors. However, although crystal structures of free RPA70N and an RPA70N-peptide fusion construct have been reported, RPA70N-inhibitor complexes have been recalcitrant to crystallization. Analysis of the P61 lattice of RPA70N crystals led us to hypothesize that the ligand-binding surface was occluded. Surface reengineering to alter key crystal lattice contacts led to the design of RPA70N E7R, E100R, and E7R/E100R mutants. These mutants crystallized in a P212121 lattice that clearly had significant solvent channels open to the critical basic cleft. Analysis of X-ray crystal structures, target peptide binding affinities, and (15)N-(1)H heteronuclear single-quantum coherence nuclear magnetic resonance spectra showed that the mutations do not result in perturbations of the RPA70N ligand-binding surface. The success of the design was demonstrated by determining the structure of RPA70N E7R soaked with a ligand discovered in a previously reported molecular fragment screen. A fluorescence anisotropy competition binding assay revealed this compound can inhibit the interaction of RPA70N with the peptide binding motif from the DNA damage response protein ATRIP. The implications of the results are discussed in the context of ongoing efforts to design RPA70N inhibitors.

Fragment-based drug discovery using NMR spectroscopy.

Nuclear magnetic resonance (NMR) spectroscopy has evolved into a powerful tool for fragment-based drug discovery over the last two decades. While NMR has been traditionally used to elucidate the three-dimensional structures and dynamics of biomacromolecules and their interactions, it can also be a very valuable tool for the reliable identification of small molecules that bind to proteins and for hit-to-lead optimization. Here, we describe the use of NMR spectroscopy as a method for fragment-based drug discovery and how to most effectively utilize this approach for discovering novel therapeutics based on our experience.

Correction to "Rational Chemical Design of Molecular Glue Degraders".

[This corrects the article DOI: 10.1021/acscentsci.2c01317.].

Rational Chemical Design of Molecular Glue Degraders.

Targeted protein degradation with molecular glue degraders has arisen as a powerful therapeutic modality for eliminating classically undruggable disease-causing proteins through proteasome-mediated degradation. However, we currently lack rational chemical design principles for converting protein-targeting ligands into molecular glue degraders. To overcome this challenge, we sought to identify a transposable chemical handle that would convert protein-targeting ligands into molecular degraders of their corresponding targets. Using the CDK4/6 inhibitor ribociclib as a prototype, we identified a covalent handle that, when appended to the exit vector of ribociclib, induced the proteasome-mediated degradation of CDK4 in cancer cells. Further modification of our initial covalent scaffold led to an improved CDK4 degrader with the development of a but-2-ene-1,4-dione ("fumarate") handle that showed improved interactions with RNF126. Subsequent chemoproteomic profiling revealed interactions of the CDK4 degrader and the optimized fumarate handle with RNF126 as well as additional RING-family E3 ligases. We then transplanted this covalent handle onto a diverse set of protein-targeting ligands to induce the degradation of BRD4, BCR-ABL and c-ABL, PDE5, AR and AR-V7, BTK, LRRK2, HDAC1/3, and SMARCA2/4. Our study undercovers a design strategy for converting protein-targeting ligands into covalent molecular glue degraders.

Intestinal permeability of cyclic peptides: common key backbone motifs identified.

Insufficient oral bioavailability is considered as a key limitation for the widespread development of peptides as therapeutics. While the oral bioavailability of small organic compounds is often estimated from simple rules, similar rules do not apply to peptides, and even the high oral bioavailability that is described for a small number of peptides is not well understood. Here we present two highly Caco-2 permeable template structures based on a library of 54 cyclo(-D-Ala-Ala(5)-) peptides with different N-methylation patterns. The first (all-trans) template structure possesses two ß-turns of type II along Ala(6)-D-Ala(1) and Ala(3)-Ala(4) and is only found for one peptide with two N-methyl groups at D-Ala(1) and Ala(6) [(NMe(1,6)]. The second (single-cis) template possesses a characteristic cis peptide bond preceding Ala(5), which results in type VI ß-turn geometry along Ala(4)-Ala(5). Although the second template structure is found in seven peptides carrying N-methyl groups on Ala(5), high Caco-2 permeability is only found for a subgroup of two of them [NMe(1,5) and NMe(1,2,4,5)], suggesting that N-methylation of D-Ala(1) is a prerequisite for high permeability of the second template structure. The structural similarity of the second template structure with the orally bioavailable somatostatin analog cyclo(-Pro-Phe-NMe-D-Trp-NMe-Lys-Thr-NMe-Phe-), and the striking resemblance with both ß-turns of the orally bioavailable peptide cyclosporine A, suggests that the introduction of bioactive sequences on the highly Caco-2 permeable templates may result in potent orally bioavailable drug candidates.

A high-throughput fluorescence polarization anisotropy assay for the 70N domain of replication protein A.

Replication protein A (RPA) interacts with multiple checkpoint proteins and promotes signaling through the ATR kinase, a key regulator of checkpoint pathways in the mammalian response to DNA damage. In cancer cells, increased DNA repair activity contributes to resistance to chemotherapy. Therefore, small molecules that block binding of checkpoint proteins to RPA may inhibit the DNA damage response and, thus, sensitize cancer cells to DNA-damaging agents. Here we report on the development of a homogeneous, high-throughput fluorescence polarization assay for identifying compounds that block the critical protein-protein interaction site in the basic cleft of the 70N domain of RPA (RPA70N). A fluorescein isothiocyanate (FITC)-labeled peptide derived from the ATR cofactor, ATRIP, was used as a probe in the binding assay. The ability of the assay to accurately detect relevant ligands was confirmed using peptides derived from ATRIP, RAD9, MRE11, and p53. The assay was validated for use in high-throughput screening using the Spectrum collection of 2000 compounds. The FPA assay was performed with a Z' factor of ≥ 0.76 in a 384-well format and identified several compounds capable of inhibiting the RPA70N binding interface.

The impact of amino acid side chain mutations in conformational design of peptides and proteins.

Local energetic effects of amino acid replacements are often considered to have only a moderate influence on the backbone conformation of proteins or peptides. As these effects are difficult to determine experimentally, no comparison has yet been performed. However, knowledge of the influence of side chain mutations is essential in protein homology modeling and in optimizing biologically active peptide ligands in medicinal chemistry. Furthermore, the tool of N-methylation of peptides is of increasing importance for the design of peptidic drugs to gain oral availability or receptor selectivity. However, N-methylation is often accompanied by considerable population of cis-peptide bond structures, resulting in completely different conformations compared with the parent peptide. To retain a favored structure, it might be important to understand the effect of different side chains on the backbone conformation and to enable the introduction of an N-methylation at the right position without disturbing a biologically active conformation. In order to detect even small energetic effects due to side chain mutations, we employed a trick to investigate the structural equilibrium of a selected cyclic pentapeptide in which two conformations are equally populated. Very small energetic differences between both conformations could easily be determined experimentally by identifying shifts in the population of both isomers.

A polyomavirus peptide binds to the capsid VP1 pore and has potent antiviral activity against BK and JC polyomaviruses.

In pursuit of therapeutics for human polyomaviruses, we identified a peptide derived from the BK polyomavirus (BKV) minor structural proteins VP2/3 that is a potent inhibitor of BKV infection with no observable cellular toxicity. The thirteen-residue peptide binds to major structural protein VP1 with single-digit nanomolar affinity. Alanine-scanning of the peptide identified three key residues, substitution of each of which results in ~1000 fold loss of binding affinity with a concomitant reduction in antiviral activity. Structural studies demonstrate specific binding of the peptide to the pore of pentameric VP1. Cell-based assays demonstrate nanomolar inhibition (EC50) of BKV infection and suggest that the peptide acts early in the viral entry pathway. Homologous peptide exhibits similar binding to JC polyomavirus VP1 and inhibits infection with similar potency to BKV in a model cell line. Lastly, these studies validate targeting the VP1 pore as a novel strategy for the development of anti-polyomavirus agents.

Selective Methyl Labeling of Proteins: Enabling Structural and Mechanistic Studies As Well As Drug Discovery Applications by Solution-State NMR.

Escherichia coli expression protocols for selective labeling of methyl groups in proteins have been essential in expanding the size range of targets that can be studied by biomolecular NMR. Based on the initial work achieving selective labeling of isoleucine, leucine, and valine residues, additional methods were developed over the past years which enabled the individual and/or simultaneous combinatorial labeling of all methyl containing amino acids. Together with the introduction of new methyl-optimized NMR experiments, this now allows the detailed characterization of protein-ligand interactions as well as mechanistic and dynamic processes of protein-protein complexes up to 1MDa in size. In this chapter, we provide a general introduction to selective labeling of proteins using E. coli-based expression systems, describe the considerations taken into account prior to the selective labeling of a protein, and include the protocols used to produce such proteins. An overview of applications using selectively labeled proteins with an emphasis on examples relevant to the drug discovery process is then presented.