RESUMEN
Two-dimensional (2D) ultrathin silica films have the potential to reach technological importance in electronics and catalysis. Several well-defined 2D-silica structures have been synthesized so far. The silica bilayer represents a 2D material with SiO2 stoichiometry. It consists of precisely two layers of tetrahedral [SiO4] building blocks, corner connected via oxygen bridges, thus forming a self-saturated silicon dioxide sheet with a thickness of â¼0.5 nm. Inspired by recent successful preparations and characterizations of these 2D-silica model systems, scientists now can forge novel concepts for realistic systems, particularly by atomic-scale studies with the most powerful and advanced surface science techniques and density functional theory calculations. This Review provides a solid introduction to these recent developments, breakthroughs, and implications on ultrathin 2D-silica films, including their atomic/electronic structures, chemical modifications, atom/molecule adsorptions, and catalytic reactivity properties, which can help to stimulate further investigations and understandings of these fundamentally important 2D materials.
Asunto(s)
Electrónica , Dióxido de Silicio , Adsorción , Catálisis , Dióxido de Silicio/química , Propiedades de SuperficieRESUMEN
Atomically defined MnO(001) thin films were grown on an Au(111) substrate, and their interaction with water (D2O) was investigated by infrared reflection absorption spectroscopy (IRAS) and thermal desorption spectroscopy (TDS). Carbon monoxide adsorption experiments were performed to probe surface atoms and defects on oxide films. Next, water interaction was investigated from which an associative binding pathway and a dissociative binding pathway were revealed, where the water molecules adsorb at terraces and water dissociation takes place at oxygen vacancies mediated by nearby Mn2+ sites. The IRAS data are supported by TDS experiments, which also manifest the importance of defects in the adsorption characteristics of MnO.
RESUMEN
The surface structure of oxide-supported metal nanoparticles can be determined via characteristic vibrations of adsorbed probe molecules such as CO. Usually, spectroscopic studies focus on peak position and intensity, which are related to binding geometries and number of adsorption sites, respectively. Employing two differently prepared model catalysts, it is demonstrated that polarization-dependent sum-frequency-generation (SFG) spectroscopy reveals the average surface structure and shape of the nanoparticles. SFG results for different particle sizes and morphologies are compared to direct real-space structure analysis by TEM and STM. The described feature of SFG could be used to monitor particle restructuring in situ and may be a valuable tool for operando catalysis.
RESUMEN
The dynamics within an O(2 × 1) adlayer on Ru(0001) is studied by density functional theory and high-speed scanning tunneling microscopy. Transition state theory proposes dynamic oxygen species in the reduced O(2 × 1) layer at room temperature. Collective diffusion processes can result in structural reorientations of characteristic stripe patterns. Spiral high-speed scanning tunneling microscopy measurements reveal this reorientation as a function of time in real space. Measurements, ranging over several minutes with constantly high frame rates of 20 Hz resolved the gradual reorientation. Moreover, reversible fast flipping events of stripe patterns are observed. These measurements relate the observations of long-term atomic rearrangements and their underlying fast processes captured within several tens of milliseconds.
RESUMEN
Two dimensional (2D) materials are a young class of materials that is foreseen to play an important role as building blocks in a range of applications, e.g. flexible electronics. For such applications, mechanical properties such as the bending rigidity κ are important. Only a few published measurements of the bending rigidity are available for 2D materials. Nearly unexplored is the question of how the 2D material density influences the bending rigidity. Here, we present helium atom scattering measurements on a "holey" bilayer silica with a density of 1.4 mg m-2, corresponding to 1.7 monolayers coverage. We find a bending rigidity of 6.6 ± 0.3 meV, which is lower than previously published measurements for a complete 2D film, where a value of 8.8 ± 0.5 meV was obtained. The decrease of bending rigidity with lower density is in agreement with theoretical predictions.
RESUMEN
Silica bilayers are stable on various metal substrates, including Ru(0001) that is used for the present study. In a systematic attempt to elucidate the detailed structure of the silica bilayer film and its registry to the metal substrate, we performed a low energy electron diffraction (I/V-LEED) study. The experimental work is accompanied by detailed calculations on the stability, orientation and dynamic properties of the bilayer at room temperature. It was determined, that the film shows a certain structural diversity within the unit cell of the metal substrate, which depends on the oxygen content at the metal-bilayer interface. In connection with the experimental I/V-LEED study, it became apparent, that a high-quality structure determination is only possible if several structural motifs are taken into account by superimposing bilayer structures with varying registry to the oxygen covered substrate. This result is conceptually in line with the recently observed statistical registry in layered 2D-compound materials.
RESUMEN
We offer a comprehensive approach to determine how physical confinement can affect the water formation reaction. By using free-standing crystalline SiO2 bilayer supported on Ru(0001) as a model system, we studied the water formation reaction under confinement in situ and in real time. Low-energy electron microscopy reveals that the reaction proceeds via the formation of reaction fronts propagating across the Ru(0001) surface. The Arrhenius analyses of the front velocity yield apparent activation energies (Eaapp) of 0.32 eV for the confined and 0.59 eV for the nonconfined reaction. DFT simulations indicate that the rate-determining step remains unchanged upon confinement, therefore ruling out the widely accepted transition state effect. Additionally, H2O accumulation cannot explain the change in Eaapp for the confined cases studied because its concentration remains low. Instead, numerical simulations of the proposed kinetic model suggest that the H2 adsorption process plays a decisive role in reproducing the Arrhenius plots.
RESUMEN
The present review reports on the preparation and atomic-scale characterization of the thinnest possible films of the glass-forming materials silica and germania. To this end state-of-the-art surface science techniques, in particular scanning probe microscopy, and density functional theory calculations have been employed. The investigated films range from monolayer to bilayer coverage where both, the crystalline and the amorphous films, contain characteristic XO4 (X=Si,Ge) building blocks. A side-by-side comparison of silica and germania monolayer, zigzag phase and bilayer films supported on Mo(112), Ru(0001), Pt(111), and Au(111) leads to a more general comprehension of the network structure of glass former materials. This allows us to understand the crucial role of the metal support for the pathway from crystalline to amorphous ultrathin film growth.
RESUMEN
The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO2 ) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO2 (111) thin films and CeO2 powders, and theoretical calculations of CeO2 (111) surfaces with oxygen vacancies (Ov ) at the surface and in the bulk. We show that, on a stoichiometric CeO2 (111) surface, H2 dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO2-x samples, both films and powders, hydroxyls and hydrides (Ce-H) are formed on the surface as well as in the bulk, accompanied by the Ce3+ â Ce4+ redox reaction. As the Ov concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H2 /CeO2 interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.
RESUMEN
Surface Action Spectroscopy, a vibrational spectroscopy method developed in recent years at the Fritz Haber Institute is employed for structure determination of clean and H2O-dosed (111) magnetite surfaces. Surface structural information is revealed by using the microscopic surface vibrations as a fingerprint of the surface structure. Such vibrations involve just the topmost atomic layers, and therefore the structural information is truly surface related. Our results strongly support the view that regular Fe3O4(111)/Pt(111) is terminated by the so-called Fetet1 termination, that the biphase termination of Fe3O4(111)/Pt(111) consists of FeO and Fe3O4(111) terminated areas, and we show that the method can differentiate between different water structures in H2O-derived adsorbate layers on Fe3O4(111)/Pt(111). With this, we conclude that the method is a capable new member in the set of techniques providing crucial information to elucidate surface structures. The method does not rely on translational symmetry and can therefore also be applied to systems which are not well ordered. Even an application to rough surfaces is possible.
RESUMEN
Alzheimer's disease (AD) is associated with deterioration of memory and cognitive function and a degeneration of neurons of the nucleus basalis of Meynert (NBM). The NBM is the major input source of acetylcholine (ACh) to the cortex. The decreasing cholinergic innervation of the cortex due to degeneration of the NBM might be the cause of loss of memory function. NBM-Deep brain stimulation (NBM-DBS) is considered to serve as a potential therapeutic option for patients with AD by supporting residual cholinergic transmission to stabilize oscillatory activity in memory-relevant circuits. However, whether DBS could improve sensory memory functions in patients with AD is not clear. Here, in a passive auditory oddball paradigm, patients with AD (N = 2) listened to repetitive background tones (standard tones) randomly interrupted by frequency deviants in two blocks with NBM-DBS OFF and then NBM-DBS ON, while age-matched healthy controls (N = 6) repeated the experiment twice. The mismatch negativity in NBM-DBS OFF significantly differed from controls in both blocks, but not under NBM-DBS, which was likely due to a pronounced P50 increase overlapping with the N1 in NBM-DBS OFF. This early complex of EEG components recovered under stimulation to a normal level as defined by responses in controls. In this temporal interval, we found in patients with NBM-DBS ON (but not with NBM-DBS OFF) and in controls a strong repetition suppression effect to standard tones - with more attenuated responses to frequently repeated standard tones. This highlights the role of NBM-DBS for sensory gating of familiar auditory information into sensory memory.
Asunto(s)
Enfermedad de Alzheimer , Estimulación Encefálica Profunda , Enfermedad de Alzheimer/terapia , Núcleo Basal de Meynert , Electroencefalografía , Humanos , Filtrado SensorialRESUMEN
The emergence of ceria (CeO2 ) as an efficient catalyst for the selective hydrogenation of alkynes has attracted great attention. Intensive research effort has been devoted to understanding the underlying catalytic mechanism, in particular the H2 -CeO2 interaction. Herein, we show that the adsorption of propyne (C3 H4 ) on ceria, another key aspect in the hydrogenation of propyne to propene, strongly depends on the degree of reduction of the ceria surface and hydroxylation of the surface, as well as the presence of water. The dissociation of propyne and the formation of methylacetylide (CH3 CC-) have been identified through the combination of infrared reflection absorption spectroscopy (IRAS) and DFT calculations. We demonstrate that propyne undergoes heterolytic dissociation on the reduced ceria surface by forming a methylacetylide ion on the oxygen vacancy site and transferring a proton to the nearby oxygen site (OH group), while a water molecule that competes with the chemisorbed methylacetylide at the vacancy site assists the homolytic dissociation pathway by rebounding the methylacetylide to the nearby oxygen site.
RESUMEN
The crystalline-to-vitreous phase transformation of a SiO2 bilayer supported on Ru(0001) was studied by time-dependent LEED, local XPS, and DFT calculations. The silica bilayer system has parallels to 3D silica glass and can be used to understand the mechanism of the disorder transition. DFT simulations show that the formation of a Stone-Wales-type of defect follows a complex mechanism, where the two layers show decoupled behavior in terms of chemical bond rearrangements. The calculated activation energy of the rate-determining step for the formation of a Stone-Wales-type of defect (4.3â eV) agrees with the experimental value. Charge transfer between SiO2 bilayer and Ru(0001) support lowers the activation energy for breaking the Si-O bond compared to the unsupported film. Pre-exponential factors obtained in UHV and in O2 atmospheres differ significantly, suggesting that the interfacial ORu underneath the SiO2 bilayer plays a role on how the disordering propagates within the film.
RESUMEN
In this paper a growth recipe for well-ordered iron sulfide films and the results of their characterisation are presented. The film was studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM). XRD data reveal that the film has a NiAs-like structure with Fe vacancies, similar to iron sulfides such as pyrrhotite and smythite, although no indication of any ordering of these vacancies was observed. LEED and STM results show that the film exhibits a 2 × 2 surface reconstruction. XPS data provide additional evidence for a large number of Fe vacancies, and the oxidation states of the Fe and S in the film are analysed.
RESUMEN
The relationship between the electronic structure of CaO and the binding energy, BE, shifts between surface and bulk atoms is examined and the physical origins of these shifts are established. Furthermore, the contribution of covalent mixing to the interaction, including the energetic importance, is investigated and found to be small. In particular, the small shift between surface and bulk O(1s) BEs is shown to originate from changes in the polarizable charge distribution of surface O anions. This relationship, which is relevant for the catalytic properties of CaO, follows because the BE shifts are dominated by initial state contributions and the relaxation in response to the core-ionization is similar for bulk and surface. In order to explain the dominance of initial state effects for the BE shifts, the relaxation is decomposed into atomic and extra-atomic contributions. The bonding and the core-level BE shifts have been studied using cluster models of CaO with Hartree-Fock wavefunctions. The theoretical shifts are compared with X-ray photoelectron spectroscopy measurements where both angular resolution and incident photon energy have been used to distinguish surface and bulk ionization.
RESUMEN
Model systems are very important to identify the working principles of real catalysts, and to develop concepts that can be used in the design of new catalytic materials. In this review we report examples of the use of model systems to better understand and control the occurrence of charge transfer at the interface between supported metal nanoparticles and oxide surfaces. In the first part of this article we concentrate on the nature of the support, and on the basic difference in metal/oxide bonding going from a wide-gap non-reducible oxide material to reducible oxide semiconductors. The roles of oxide nanostructuring, bulk and surface defectiveness, and doping with hetero-atoms are also addressed, as they are all aspects that severely affect the metal/oxide interaction. Particular attention is given to the experimental measures of the occurrence of charge transfer at the metal/oxide interface. In this respect, systems based on oxide ultrathin films are particularly important as they allow the use of scanning probe spectroscopies which, often in combination with other measurements and with first principles theoretical simulations, allow full characterization of small supported nanoparticles and their charge state. In a few selected cases, a precise count of the electrons transferred between the oxide and the supported nanoparticle has been possible. Charge transfer can occur through thin, two-dimensional oxide layers also thanks to their structural flexibility. The flow of charge through the oxide film and the formation of charged adsorbates are accompanied in fact by a substantial polaronic relaxation of the film surface which can be rationalized based on electrostatic arguments. In the final part of this review the relationships between model systems and real catalysts are addressed by discussing some examples of how lessons learned from model systems have helped in rationalizing the behavior of real catalysts under working conditions.
RESUMEN
A new two-dimensional (2D) germanium dioxide film has been prepared. The film consists of interconnected germania tetrahedral units forming a bilayer structure, weakly coupled to the supporting Pt(111) metal-substrate. Density functional theory calculations predict a stable structure of 558-membered rings for germania films, while for silica films 6-membered rings are preferred. By varying the preparation conditions the degree of order in the germania films is tuned. Crystalline, intermediate ordered and purely amorphous film structures are resolved by analysing scanning tunnelling microscopy images.
RESUMEN
The interaction of hydrogen with reduced ceria (CeO2-x ) powders and CeO2-x (111) thin films was studied using several characterization techniques including TEM, XRD, LEED, XPS, RPES, EELS, ESR, and TDS. The results clearly indicate that both in reduced ceria powders as well as in reduced single crystal ceria films hydrogen may form hydroxyls at the surface and hydride species below the surface. The formation of hydrides is clearly linked to the presence of oxygen vacancies and is accompanied by the transfer of an electron from a Ce3+ species to hydrogen, which results in the formation of Ce4+ , and thus in oxidation of ceria.
RESUMEN
We present a new polymorph of the two-dimensional (2D) silica film with a characteristic 'zigzag' line structure and a rectangular unit cell which forms on a Ru(0001) metal substrate. This new silica polymorph may allow for important insights into growth modes and transformations of 2D silica films as a model system for the study of glass transitions. Based on scanning tunneling microscopy, low energy electron diffraction, infrared reflection absorption spectroscopy, and X-ray photoelectron spectroscopy measurements on the one hand, and density functional theory calculations on the other, a structural model for the 'zigzag' polymorph is proposed. In comparison to established monolayer and bilayer silica, this 'zigzag' structure system has intermediate characteristics in terms of coupling to the substrate and stoichiometry. The silica 'zigzag' phase is transformed upon reoxidation at higher annealing temperature into a SiO2 silica bilayer film which is chemically decoupled from the substrate.
RESUMEN
Understanding the glass-crystal transition in real space using scanning probe microscopy, thus solving a long-standing problem posed during the first half of the 20th century, is the goal of this research.