RESUMEN
Conspectusπ-Conjugated polymers have gained significant interest because of their potential applications in optoelectronics, bioelectronics, and other domains. The controlled synthesis of π-conjugated block polymers optimizes their performance and enables novel properties and functions. However, precise control of the self-assembled architectures of π-conjugated polymers remains a formidable challenge. Inspired by the precise helical architectures of biomacromolecules, the helical polymers and the supramolecular helical assemblies have gained significant attention. Helical polymers with an excess of one-handed helicity can be optically active with a strong tendency toward self-assembly. Incorporating a helical polymer into a π-conjugated polymer can induce asymmetric helical assemblies, leading to novel chiral materials with unique functionalities.To control the self-assembly of architectures, π-conjugated polymers are usually synthesized into block copolymers by incorporating a polymer with self-assembling characteristics. Although various π-conjugated block copolymers have been produced, precise and asymmetric self-assembly is still challenging and has rarely been addressed. Incorporating helical polymers into the π-conjugated polymers can induce a precise and asymmetric self-assembly, which transfers the chirality of the helical polymer block to the π-conjugated polymer, resulting in chiral supramolecular architectures with unique chiroptical properties and functionalities. However, synthesizing hybrid block copolymers containing two distinct polymer blocks is complicated. Some general strategies such as connecting the chain ends of two preformed homopolymers and extending the chain of a prefabricated π-conjugated polymer with a second monomer are time-consuming and require complex synthetic protocols. Therefore, developing novel strategies for the facile synthesis of π-conjugated block copolymers with a predictable molar mass, low dispersity, and tunable composition is of practical importance.Recently, we investigated a controlled synthesis of helical polyisocyanides, helical polyallenes, and helical polycarbenes by developing advanced Pd(II) and Ni(II) catalysts. These helical polymers were successfully incorporated into π-conjugated polymers, including polythiophene, polyfluorene, and poly(phenyleneethynylene), via a one-pot sequential living block polymerization of the two distinct monomers using Pd(II)- or Ni(II)-complexes as catalysts. As a result, a variety of well-defined π-conjugated block copolymers containing helical polymeric blocks were readily synthesized. Although the copolymerized monomers possess different structures and polymerization mechanisms, the one-pot block copolymerization followed a living polymerization mechanism and provided the desired π-conjugated block copolymers in high yields with controlled molar mass, narrow size distribution, and tunable composition.Remarkably, the helical polymeric block induces the π-conjugated block copolymer asymmetric self-assembly into a supramolecular, one-handed helical architecture resulting in distinct optical properties. More interestingly, by utilizing the crystallization of conjugated blocks and one-handed helical blocks, the crystallization-driven and helix-induced precise asymmetric living self-assembly yielded a family of uniform and single-handed helical architectures with controlled dimensions, narrow distribution, and well-defined helicity. The transfer of helical chirality to the supramolecular architectures rendered the achiral π-conjugated blocks with unique chiroptical properties such as the emission of white light over a broad optical spectrum and the circularly polarized luminescence.
RESUMEN
Porous frameworks with controlled pore structure and tunable aperture are greatly demanded. However, precise synthesis of this kind of materials is a formidable challenge. Herein, we report the fabrication of two-dimensional (2D) supramolecular polymer frameworks using a precisely synthesized rod-like helical polyisocyanide as link. Four three-arm star-shaped polyisocyanides with the degree of the polymerization of 10, 20, 30 and 40, and having 2-ureido-4[1H]-pyrimidinone (UPy) terminals were synthesized. 2D-Crystalline polymer frameworks with apertures of 5.3, 10.1, 13.9, and 19.1â nm were respectively obtained through intermolecular hydrogen bonding interaction between the terminal Upy units. The pore aperture is dependent on the length of polyisocyanide backbone. Thus, well-defined supramolecular polymer frameworks with controlled and uniform hexagonal pores were obtained, as proved by small-angle X-ray scattering (synchrotron radiation facility), atomic force microscopy, and Brunauer-Emmett-Teller analyses. The frameworks with uniform large pore aperture were used to purify nanomaterials and immobilize biomacromolecules. For instance, the membranes of the polymer frameworks could size-fractionation of silver nanoparticles into uniform nanoparticles with very low dispersity. The frameworks with large aperture facilitated the inclusion of myoglobin and enhanced the stability and catalytic activity.
RESUMEN
Recently, cyclic polymers have attracted increasing interest due to their unique topologies, properties, and functions compared to the linear analogues. This mini-review focuses on the recent advances in the synthesis and applications of cyclic polymers. First, the main synthetic methods for cyclic polymers, namely ring closure and ring expansion methods, are presented and discussed, followed by a review on the exploration of the properties and applications of synthetic cyclic polymers. Finally, a critical assessment of the preliminary studies exploring the efficient synthesis and potential applications of cyclic polymers are presented, and the remaining challenges in the field as well as ideas for solving these challenges will be discussed.
RESUMEN
Developing high performance and environment-friendly fluoropolymers is greatly desired. In this work, we found that 2-diazo-1,1,1-trifluoroethane can be polymerized by air-stable alkyne-palladium(II) catalysts following a living polymerization mechanism, affording a fluoropolymer, poly(trifluoromethyl methylene) in high yield with controlled molar mass and low dispersity. This polymer bears trifluoromethyl on every main chain atom and thus has good resistance to chemical corrosion, high hydrophobicity, and excellent dielectric constant with low dielectric loss. Due to the steric hindrance between the trifluoromethyl pendants, the synthetic poly(trifluoromethyl methylene) can twist into a stable helix. The one-handed preferred helices synthesized using chiral PdII -catalysts exhibit high optical activity and circularly polarized luminescence. Remarkably, such polymer can be completely degraded to (E)-1,1,1,4,4,4-hexafluorobut-2-ene at high temperatures (>280 °C). Additionally, taking advantage of the living chain end, the polymer can be further modified.
RESUMEN
Inspired by biological helices (e.g., DNA), artificial helical polymers have attracted intense attention. However, precise synthesis of one-handed helices from achiral materials remains a formidable challenge. Herein, a series of achiral poly(biphenyl allene)s with controlled molar mass and low dispersity were prepared and induced into one-handed helices using chiral amines and alcohols. The induced one-handed helix was simultaneously memorized, even after the chiral inducer was removed. The switchable induction processes were visible to naked eye; the achiral polymers exhibited blue emission (irradiated at 365â nm), whereas the induced one-handed helices exhibited cyan emission with clear circularly polarized luminescence. The induced helices formed stable gels in various solvents with helicity discrimination ability: the same-handed helix gels were self-healing, whereas the gels of opposite-handed helicity were self-sorted. Moreover, the induced helices could separate enantiomers via enantioselective crystallization with high efficiency and switchable enantioselectivity.
RESUMEN
End-functionalization is an effective strategy for constructing functional materials. A method for chain-end functionalization of helical polycarbenes is herein developed that relied on Sonogashira coupling reaction. In this work, a family of helical polycarbenes with controlled molecular mass (Mn ) and low polydispersity (Mw /Mn ) is readily prepared using Pd(II) and the Wei-Phos ligand as initiator. The Pd(II) complex is confirmed to remain at the chain end of polycarbene. Subsequently, a series of terminal alkyne derivatives with interesting functional groups, including the F atom, aldehyde, or anthracene groups, are synthesized. They could be installed at the chain end of polycarbene through Sonogashira coupling reaction catalyzed by the Pd(II) complex at the chain end. Moreover, a couple of hybrid block copolymers are easily obtained by installing terminal alkynes modified by another type of polymer. The structures of the isolated polymers are confirmed by 1 H nuclear magnetic resonance (1 H NMR), 19 F nuclear magnetic resonance (19 F NMR), 31 P nuclear magnetic resonance (31 P NMR), and Fourier transform infrared spectroscopy (FT-IR), respectively. The self-assembly properties of the hybrid block copolymers are also investigated by atomic force spectroscopy analysis. By the hereby developed method, various functional groups can be introduced at the chain end of helical polycarbenes for constructing functional polymer materials, moreover, the transition metal residues at the end of polymer chains can be easily removed.
Asunto(s)
Alquinos , Polímeros , Ligandos , Espectroscopía de Resonancia Magnética , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Porous materials have attracted interest due to their high specific surface area and rich functionality. Immobilizing organocatalysts onto porous polymers not only boosts enantioselectivity but also improves the reaction rates. In this work, a series of porous polymers C-poly-3ms with rigid polyisocyanide-carrying secondary amine pendants as building blocks were successfully prepared. And the pore size and optical activity of C-poly-3ms can be controlled by the length of the polyisocyanide blocks due to their rigid and helical backbone. C-poly-3150 demonstrated a preferred left-handed helix with a θ 364 value of -8.21 × 103. The pore size and S BET of C-poly-3150 were 17.52 nm and 7.98 m2 g-1, respectively. The porous C-poly-3150 catalyzes the asymmetric Michael addition reaction efficiently and generates the target products in satisfactory yield and excellent enantioselectivity. For 6ab, an enantiomeric excess (ee) and a diastereomeric ratio (dr) up to 99% and 99/1 could be achieved, respectively. The recovered catalyst can be recycled at least 6 times in the asymmetric Michael addition reaction while maintaining activity and stereoselectivity.
RESUMEN
Controlled synthesis of conjugated block polymers enables the optimization of their self-assembly and may lead to distinct optical properties and functionalities. Herein, we report a direct chain extension of one-handed helical poly(acyl methane) with 1-ethynyl-4-iodo-2,5-bis(octyloxy)benzene, affording well-defined π-conjugated poly(acyl methane)-b-poly(phenylene ethynylene) copolymers. Although the distinct monomers are polymerized via different mechanisms, the one-pot copolymerization follows a living polymerization manner, giving the desired optically active block copolymers with controllable molar mass and low distribution. The block copolymerization induced chiral self-assembly simultaneously due to the one-handed helicity of the poly(acyl methane) block, giving spherical nanoparticles, one-handed helices, and chiral micelles with controlled dimensions regarding the composition of the generated copolymers. Interestingly, the chiral assemblies exhibit clear circularly polarized luminescence with tunable handedness and a high dissymmetric factor.
RESUMEN
Cyclic polymers have very unique structure and properties, and thus have drawn intense research attention. However, controlled synthesis of cyclic polymers with predictable molar mass and narrow distribution is still a challenging task. In this study, we developed a novel cyclic catalyst that initiates the ring-expansion polymerisation of isocyanides, producing a series of cyclic helical polymers with predictable molecular weight and low dispersity. Interestingly, the ring-expansion polymerization of the isocyanide macromonomers gives well-defined cyclic bottlebrush polymers. The cyclic topology was demonstrated using transmission electron microscopy.
RESUMEN
Developing eco-friendly chiral organocatalysts with the combined advantages of homogeneous catalysis and heterogeneous processes is greatly desired. In this work, a family of amphiphilic one-handed helical polyisocyanides bearing phosphine pendants is prepared, which self-assembles into well-defined chiral micelles in water and showed thermo-responsiveness with a cloud point of approximately 38.4 °C. The micelles with abundant phosphine moieties at the interior efficiently catalyze asymmetric cross Rauhut-Currier reaction in water. Various water-insoluble substrates are transferred to target products in high yield with excellent enantioselectivity. The yield and enantiomeric excess (ee) of the product generated in water are up to 90% and 96%, respectively. Meanwhile, the yields of the same R-C reaction catalyzed by the polymer itself in organic solvents is <16%, with an ee < 72%. The homogeneous reaction of the chiral micelles in water turns to heterogeneous at temperatures higher than the cloud point, and the catalyst precipitation facilitates product isolation and catalyst recovery. The polymer catalyst is recycled 10 times while maintaining activity and enantioselectivity.
RESUMEN
The emergence of various resistant bacteria and overuse of antibiotics have led to severe side effects. Therefore, developing efficient and safe antibacterial systems is important. Herein, well-defined antimicrobial material-helical poly(phenyl guanidinium isocyanide) block copolymers with different conformations (l-P3-van, d-P3-van, and dl-P3-van) that connect vancomycin (van) to the polymer through a disulfide bond were synthesized. The prepared antimicrobial materials exhibit broad-spectrum antimicrobial activity, low bacterial resistance, and good proteolytic stability. They also overcome the intrinsic resistance of Gram-negative bacteria to van with a 100-fold increase in antimicrobial activity. Interestingly, the conformation of the material promotes its antimicrobial activity. The left-handed helix conformation shows five-fold more antimicrobial activity than the right-handed helical conformation, thereby opening a path for the application of nanochirality in the field of antibiotics.